2BXLU-PB01Smart Bird Camera

Rev 1/26/2023 Greater Bay Cedar Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-08-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BXLU-PB01 [Greater Bay Cedar Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Greater Bay Cedar Limited] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Tu fei Rev 1/26/2023 Greater Bay Cedar Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-08-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BXLU-PB01 [Greater Bay Cedar Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Tu fei

Greater Bay Cedar Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: August 8, 2026 SUBJECT: FCC ID: 2BXLU-PB01 To Whom It May Concern: I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements: 1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, Sincerely, Tu fei -------------------------------

Rev11/20/07 GreaterBayCedarLimited FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:2BXLU-PB01 PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName* SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNII devices SCH.pdf OP.pdf Blockdiagram.pdf FCCID_SoftwareSecurityOperational DescriptionforU-NIIDevices.pdf Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,wealsorequest temporaryconfidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName* ExternalPhotos TestSetupPhotos InternalPhotos UserManual Sincerely, Tufei 2026.08.08

GreaterBayCedarLimited ROOM110388GLOUCESTERROAD，WANCHAI,HK ProductSimilarityDeclaration Date:August11,2026 product:SmartBirdCamera ModelNumber:ParallensBirdCamB01,ParallensBirdCamSpecialPack, ParallensBirdCamB01SP,ParallensBirdCamB01SpecialPack,B01) ToWhomItMayConcern, We,GreaterBayCedarLimited,herebydeclarethatourproduct(ParallensBirdCam) ModelNumber:ParallensBirdCamB01,ParallensBirdCamSpecialPack,ParallensBird CamB01SP,ParallensBirdCamB01SpecialPack,B01) PCBboard,Schematic,Hardwareversion,Softwareversion,structureandinternalphotos aresame,nameddifferentlyduetomarketingpurposes. Shouldyouhaveanyquestionsorcommentsregardingthismatter,pleasehavemybest attention. Sincerely, (Signed) Name:Tufei Company:GreaterBayCedarLimited E-mail:[email protected]

Greater Bay Cedar Limited. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: August 8, 2026 SUBJECT: FCC ID: 2BXLU-PB01 To Whom It May Concern: We, the undersigned, hereby authorize Alex wang at Shenzhen BANTEK Testing Co., Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by __Shenzhen BANTEK Testing Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Tu fei

Report No.: BTEK260423006A01E01 Page: 1 of 4 Appendix EUT Photos for BTEK260423006A01E01 Report No.: BTEK260423006A01E01 Page: 2 of 4 EUT Constructional Details (EUT Photos) EUT View 1 EUT View 2 EUT View 3 Report No.: BTEK260423006A01E01 Page: 3 of 4 EUT View 4 EUT View 5 EUT View 6 Report No.: BTEK260423006A01E01 Page: 4 of 4 EUT View 7 EUT View 8 EUT View 9

ReportNo.:BTEK260423006A01E01 Page: 1 of 1 LABELANDLOCATION

Report No.: BTEK260423006A01E01 Page: 1 of 5 Appendix EUT Photos for BTEK260423006A01E01 Report No.: BTEK260423006A01E01 Page: 2 of 5 EUT Constructional Details (EUT Photos) EUT View 10 EUT View 11 EUT View 12 Report No.: BTEK260423006A01E01 Page: 3 of 5 EUT View 13 EUT View 14 EUT View 15 FPC ANT Report No.: BTEK260423006A01E01 Page: 4 of 5 EUT View 16 EUT View 17 EUT View 18 Report No.: BTEK260423006A01E01 Page: 5 of 5 EUT View 19 EUT View 20 EUT View 21

Report No.: BTEK260423006A01E0103 Page: 1 of 6 TEST REPORT Application No.: BTEK260423006A01E01 Applicant: Greater Bay Cedar Limited Address of Applicant: ROOM 1103 88 GLOUCESTER ROAD，WAN CHAI, HK Manufacturer: Greater Bay Cedar Limited Address of Manufacturer: ROOM 1103 88 GLOUCESTER ROAD，WAN CHAI, HK Equipment Under Test (EUT): EUT Name: Smart Bird Camera Test Model.: Parallens Bird Cam Adding Model(s): Parallens Bird Cam B01, Parallens Bird Cam Special Pack, Parallens Bird Cam B01SP, Parallens Bird Cam B01 Special Pack,B01 Trade Mark: FCC ID: 2BXLU-PB01 Standard(s) : 47 CFR Part 2 Subpart J Section 2.1091 447498 D01 General RF Exposure Guidance v06 Date of Receipt Sample(s): 2026-07-14 Date of Test: 2026-07-14 to 2026-08-02 Date of Issue: 2026-08-03 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Alex Wang/ Approved & Authorized EMC Laboratory Manager Report No.: BTEK260423006A01E0103 Page: 2 of 6 Revision Record Version Issue Date Revisions Remarks V0 2026-08-03 Initial Valid Authorized for issue by: Karl Liu / File Editor June Li/Reviewer Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Report No.: BTEK260423006A01E0103 Page: 3 of 6 2 Contents Page 1 Cover Page ...................................................................................................................................................... 1 2 Contents .......................................................................................................................................................... 3 3 General Information ....................................................................................................................................... 4 3.1 Details of E.U.T. ..................................................................................................................................................... 4 3.2 Description of Support Units ................................................................................................................................. 4 3.3 Test Location .......................................................................................................................................................... 4 3.4 Deviation from Standards ..................................................................................................................................... 5 3.5 Abnormalities from Standard Conditions ............................................................................................................ 5 4 Test Requirement ........................................................................................................................................... 6 4.1Assessment Result ................................................................................................................................................. 6 Report No.: BTEK260423006A01E0103 Page: 4 of 6 3 General Information 3.1 Details of E.U.T. Power supply: Input: 5V⎓2A Battery: 3.7V⎓5000mAh 18.5Wh 2.4G WIFI Support Standards: 802.11b, 802.11g, 802.11n-HT20 Frequency Range: 2412-2462MHz for 802.11b/g/n(HT20) Type of Modulation: 802.11b: DSSS; 802.11g/n: OFDM Quantity of Channels 11 for 802.11b/g/n(HT20) Channel Separation: 5MHz Type of Antenna: FPC Antenna Antenna Gain: 1.14dBi 5G WIFI Support Standards: 802.11a, 802.11n(HT20), 802.11ac-VHT20 Operation Frequency U-NII-1:5180-5240MHz U-NII-3: 5745-5825MHz Modulation Type: OFDM Channel Spacing: 802.11a/n(HT20)/ac(VHT20): 20MHz Antenna Type: FPC Antenna Antenna Gain: U-NII-1: 0.39dBi U-NII-3: 5.08dBi Sample No.: BTEK260423006-001 Model(s) Difference Statement Single Model. Multi-Models:Parallens Bird Cam, Parallens Bird Cam B01, Parallens Bird Cam Special Pack, Parallens Bird Cam B01SP, Parallens Bird Cam B01 Special Pack,B01 Only the model Parallens Bird Cam was tested. According to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions of other models are identical for the above models, with only difference on Model No 3.2 Description of Support Units Description Manufacturer Model No. Serial No. / / / / 3.3 Test Location All tests were performed at: Shenzhen BANTEK Testing Co., Ltd., A5&A6, Building B1&B2, No.45 Gangtou Road, Bogang Community, Shajing Street, Bao'an District, Shenzhen, Guangdong, China 518103 Tel:0755-2334 4200 Fax: 0755-2334 4200 FCC Registration Number: 264293 Designation Number: CN1356 No tests were sub-contracted. Report No.: BTEK260423006A01E0103 Page: 5 of 6 3.4 Deviation from Standards None 3.5 Abnormalities from Standard Conditions None Report No.: BTEK260423006A01E0103 Page: 6 of 6 4 Test Requirement According to §1.1307(b)(1) and KDB 447498 D01 General RF Exposure Guidance v06, system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation …

Text truncated - open the document above for the full version.

Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 1 / 50 RF Test Report For BTEK260423006A01E01 Project No.: BTEK260423006A01E0102 Product Description: 22.9°C, 55%, 101.7kPa Test Engineer: Milo Test Date: 2026-07-31 Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 2 / 50 Test Summary Item Result Duty Cycle Pass Bandwidth Pass Maximum Conducted Output Power Pass Maximum Power Spectral Density Pass Frequency Stability Pass Band Edge Pass Spurious Emission Pass Additional Spurious Emission Pass Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 3 / 50 1. Duty Cycle 1.1 Test Result 1.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 802.11a SISO 5180 0.276 0.308 89.61 0.48 0.06 5200 0.277 0.309 89.64 0.47 0.06 5240 0.276 0.308 89.61 0.48 0.06 802.11n (HT20) SISO 5180 0.293 0.325 90.15 0.45 0.03 5200 0.293 0.325 90.15 0.45 0.03 5240 0.293 0.324 90.43 0.44 0.03 802.11ac (VHT20) SISO 5180 0.296 0.328 90.24 0.45 0.03 5200 0.298 0.328 90.85 0.42 0.03 5240 0.296 0.328 90.24 0.45 0.03 Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 4 / 50 1.2 Test Graph 1.2.1 Ant1 802.11a_LCH_5180MHz_Ant1_NTNV 802.11a_MCH_5200MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 5 / 50 Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 6 / 50 802.11a_HCH_5240MHz_Ant1_NTNV 802.11n(HT20)_LCH_5180MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 7 / 50 802.11n(HT20)_MCH_5200MHz_Ant1_NTNV 802.11n(HT20)_HCH_5240MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 8 / 50 802.11ac(VHT20)_LCH_5180MHz_Ant1_NTNV 802.11ac(VHT20)_MCH_5200MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 9 / 50 802.11ac(VHT20)_HCH_5240MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 10 / 50 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 802.11a SISO 5180 1 18.803 / Pass 5200 1 18.583 / Pass 5240 1 18.545 / Pass 802.11n (HT20) SISO 5180 1 19.186 / Pass 5200 1 17.652 / Pass 5240 1 17.637 / Pass 802.11ac (VHT20) SISO 5180 1 17.729 / Pass 5200 1 17.776 / Pass 5240 1 17.885 / Pass 2.1.2 26dB BW Mode TX Type Frequency (MHz) ANT 26dB Bandwidth (MHz) Verdict Result Limit 802.11a SISO 5180 1 32.923 / Pass 5200 1 32.920 / Pass 5240 1 32.940 / Pass 802.11n (HT20) SISO 5180 1 39.020 / Pass 5200 1 38.832 / Pass 5240 1 39.005 / Pass 802.11ac (VHT20) SISO 5180 1 37.163 / Pass 5200 1 36.614 / Pass 5240 1 37.763 / Pass Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 11 / 50 2.2 Test Graph 2.2.1 OBW 802.11a_LCH_5180MHz_Ant1_NTNV 802.11a_MCH_5200MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 12 / 50 Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 13 / 50 802.11a_HCH_5240MHz_Ant1_NTNV 802.11n(HT20)_LCH_5180MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 14 / 50 802.11n(HT20)_MCH_5200MHz_Ant1_NTNV 802.11n(HT20)_HCH_5240MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 15 / 50 802.11ac(VHT20)_LCH_5180MHz_Ant1_NTNV 802.11ac(VHT20)_MCH_5200MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 16 / 50 802.11ac(VHT20)_HCH_5240MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 17 / 50 2.2.2 26dB BW 802.11a_LCH_5180MHz_Ant1_NTNV 802.11a_MCH_5200MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 18 / 50 Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 19 / 50 802.11a_HCH_5240MHz_Ant1_NTNV 802.11n(HT20)_LCH_5180MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 20 / 50 802.11n(HT20)_MCH_5200MHz_Ant1_NTNV 802.11n(HT20)_HCH_5240MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 21 / 50 802.11ac(VHT20)_LCH_5180MHz_Ant1_NTNV 802.11ac(VHT20)_MCH_5200MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 22 / 50 802.11ac(VHT20)_HCH_5240MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 23 / 50 3. Maximum Conducted Output Power 3.1 Test Result 3.1.1 Power Mode TX Type Frequency (MHz) Maximum Average Conducted Output Power (dBm) Verdict ANT1 Limit 802.11a SISO 5180 16.28 <=23.98 Pass 5200 16.21 <=23.98 Pass 5240 16.59 <=23.98 Pass 802.11n (HT20) SISO 5180 16.61 <=23.98 Pass 5200 16.90 <=23.98 Pass 5240 16.51 <=23.98 Pass 802.11ac (VHT20) SISO 5180 16.06 <=23.98 Pass 5200 16.08 <=23.98 Pass 5240 16.30 <=23.98 Pass Note1: Antenna Gain: Ant1: 0.39dBi; Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 24 / 50 3.2 Test Graph 3.2.1 Power 802.11a_LCH_5180MHz_Ant1_NTNV 802.11a_MCH_5200MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 25 / 50 Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 26 / 50 802.11a_HCH_5240MHz_Ant1_NTNV 802.11n(HT20)_LCH_5180MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 27 / 50 802.11n(HT20)_MCH_5200MHz_Ant1_NTNV 802.11n(HT20)_HCH_5240MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 28 / 50 802.11ac(VHT20)_LCH_5180MHz_Ant1_NTNV 802.11ac(VHT20)_MCH_5200MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 29 / 50 802.11ac(VHT20)_HCH_5240MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 30 / 50 4. Maximum Power Spectral Density 4.1 Test Result 4.1.1 PSD Mode TX Type Frequency (MHz) Maximum PSD (dBm/MHz) Verdict ANT1 Limit 802.11a SISO 5180 5.86 <=11 Pass 5200 5.88 <…

Text truncated - open the document above for the full version.

Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 1 / 54 RF Test Report For BTEK260423006A01E01 Project No.: BTEK260423006A01E0102 Product Description: 22.9°C, 55%, 101.7kPa Test Engineer: Milo Test Date: 2026-07-31 Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 2 / 54 Test Summary Item Result Duty Cycle Pass Bandwidth Pass Maximum Conducted Output Power Pass Maximum Power Spectral Density Pass Frequency Stability Pass Band Edge Pass Spurious Emission Pass Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 3 / 54 1. Duty Cycle 1.1 Test Result 1.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 802.11a SISO 5745 0.276 0.308 89.61 0.48 0.04 5785 0.276 0.308 89.61 0.48 0.03 5825 0.276 0.309 89.32 0.49 0.06 802.11n (HT20) SISO 5745 0.292 0.324 90.12 0.45 0.03 5785 0.292 0.324 90.12 0.45 0.09 5825 0.295 0.324 91.05 0.41 0.12 802.11ac (VHT20) SISO 5745 0.297 0.329 90.27 0.44 0.06 5785 0.299 0.329 90.88 0.42 0.03 5825 0.297 0.329 90.27 0.44 0.06 Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 4 / 54 1.2 Test Graph 1.2.1 Ant1 802.11a_LCH_5745MHz_Ant1_NTNV 802.11a_MCH_5785MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 5 / 54 Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 6 / 54 802.11a_HCH_5825MHz_Ant1_NTNV 802.11n(HT20)_LCH_5745MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 7 / 54 802.11n(HT20)_MCH_5785MHz_Ant1_NTNV 802.11n(HT20)_HCH_5825MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 8 / 54 802.11ac(VHT20)_LCH_5745MHz_Ant1_NTNV 802.11ac(VHT20)_MCH_5785MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 9 / 54 802.11ac(VHT20)_HCH_5825MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 10 / 54 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 802.11a SISO 5745 1 16.748 / Pass 5785 1 17.535 / Pass 5825 1 17.068 / Pass 802.11n (HT20) SISO 5745 1 17.636 / Pass 5785 1 18.541 / Pass 5825 1 18.137 / Pass 802.11ac (VHT20) SISO 5745 1 17.635 / Pass 5785 1 18.198 / Pass 5825 1 17.943 / Pass 2.1.2 6dB BW Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 802.11a SISO 5745 1 15.125 >=0.5 Pass 5785 1 15.158 >=0.5 Pass 5825 1 15.163 >=0.5 Pass 802.11n (HT20) SISO 5745 1 15.168 >=0.5 Pass 5785 1 15.182 >=0.5 Pass 5825 1 15.190 >=0.5 Pass 802.11ac (VHT20) SISO 5745 1 15.144 >=0.5 Pass 5785 1 15.170 >=0.5 Pass 5825 1 15.151 >=0.5 Pass Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 11 / 54 2.2 Test Graph 2.2.1 OBW 802.11a_LCH_5745MHz_Ant1_NTNV 802.11a_MCH_5785MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 12 / 54 Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 13 / 54 802.11a_HCH_5825MHz_Ant1_NTNV 802.11n(HT20)_LCH_5745MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 14 / 54 802.11n(HT20)_MCH_5785MHz_Ant1_NTNV 802.11n(HT20)_HCH_5825MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 15 / 54 802.11ac(VHT20)_LCH_5745MHz_Ant1_NTNV 802.11ac(VHT20)_MCH_5785MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 16 / 54 802.11ac(VHT20)_HCH_5825MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 17 / 54 2.2.2 6dB BW 802.11a_LCH_5745MHz_Ant1_NTNV 802.11a_MCH_5785MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 18 / 54 Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 19 / 54 802.11a_HCH_5825MHz_Ant1_NTNV 802.11n(HT20)_LCH_5745MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 20 / 54 802.11n(HT20)_MCH_5785MHz_Ant1_NTNV 802.11n(HT20)_HCH_5825MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 21 / 54 802.11ac(VHT20)_LCH_5745MHz_Ant1_NTNV 802.11ac(VHT20)_MCH_5785MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 22 / 54 802.11ac(VHT20)_HCH_5825MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 23 / 54 3. Maximum Conducted Output Power 3.1 Test Result 3.1.1 Power Mode TX Type Frequency (MHz) Maximum Average Conducted Output Power (dBm) Verdict ANT1 Limit 802.11a SISO 5745 15.29 <=30 Pass 5785 12.76 <=30 Pass 5825 12.86 <=30 Pass 802.11n (HT20) SISO 5745 15.42 <=30 Pass 5785 16.19 <=30 Pass 5825 12.23 <=30 Pass 802.11ac (VHT20) SISO 5745 15.55 <=30 Pass 5785 16.76 <=30 Pass 5825 12.29 <=30 Pass Note1: Antenna Gain: Ant1: 5.08dBi; Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 24 / 54 3.2 Test Graph 3.2.1 Power 802.11a_LCH_5745MHz_Ant1_NTNV 802.11a_MCH_5785MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 25 / 54 Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 26 / 54 802.11a_HCH_5825MHz_Ant1_NTNV 802.11n(HT20)_LCH_5745MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 27 / 54 802.11n(HT20)_MCH_5785MHz_Ant1_NTNV 802.11n(HT20)_HCH_5825MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 28 / 54 802.11ac(VHT20)_LCH_5745MHz_Ant1_NTNV 802.11ac(VHT20)_MCH_5785MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 29 / 54 802.11ac(VHT20)_HCH_5825MHz_Ant1_NTNV Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK260423006A01E0102 Page 30 / 54 4. Maximum Power Spectral Density 4.1 Test Result 4.1.1 PSD-Band3 Mode TX Type Frequency (MHz) Maximum PSD (dBm/500kHz) Verdict ANT1 Limit 802.11a SISO 5745 2.90 <=30 Pass 5785 -0.08 <=30 Pass 5825 0.04…

Text truncated - open the document above for the full version.

Report No.: BTEK260423006A01E0102 Page: 1 of 28 TEST REPORT Application No.: BTEK260423006A01E01 Applicant: Greater Bay Cedar Limited Address of Applicant: ROOM 1103 88 GLOUCESTER ROAD，WAN CHAI, HK Manufacturer: Greater Bay Cedar Limited Address of Manufacturer: ROOM 1103 88 GLOUCESTER ROAD，WAN CHAI, HK Equipment Under Test (EUT): EUT Name: Smart Bird Camera Test Model.: Parallens Bird Cam Adding Model(s): Parallens Bird Cam B01, Parallens Bird Cam Special Pack, Parallens Bird Cam B01SP, Parallens Bird Cam B01 Special Pack,B01 Trade Mark: FCC ID: 2BXLU-PB01 Standard(s) : 47 CFR Part 15, Subpart E 15.407 789033 D02 General UNII Test Procedures New Rules v02r01 ANSI C63.10:2020 Date of Receipt Sample(s): 2026-07-14 Date of Test: 2026-07-14 to 2026-08-02 Date of Issue: 2026-08-03 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Alex Wang/ Approved & Authorized EMC Laboratory Manager Report No.: BTEK260423006A01E0102 Page: 2 of 28 Revision Record Version Issue Date Revisions Remarks V0 2026-08-03 Initial Valid Authorized for issue by: Karl Liu / File Editor June Li/Reviewer Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Report No.: BTEK260423006A01E0102 Page: 3 of 28 2 Test Summary Standard Item Requirement Result 47 CFR Part 15, Subpart E 15.407 Antenna Requirement 47 CFR Part 15, Subpart C 15.203 Pass Transmission in the Absence of Data 47 CFR Part 15, Subpart E 15.407 (c) Pass Standard Item Requirement Result 47 CFR Part 15, Subpart E 15.407 Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.207 & Subpart E 15.407 b(9) Pass Duty Cycle KDB 789033 D02 II B 1 Pass 99% Bandwidth N/A Pass 26dB Emission bandwidth 47 CFR Part 15, Subpart E 15.407 (a) Pass Minimum 6 dB bandwidth (5.725-5.85 GHz band ) 47 CFR Part 15, Subpart E 15.407 (e) Pass Maximum Conducted output power 47 CFR Part 15, Subpart E 15.407 (a) Pass Power spectrum density 47 CFR Part 15, Subpart E 15.407 (a) Pass Radiated Emissions 47 CFR Part 15, Subpart C 15.209 & Subpart E 15.407(b) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.209 & Subpart E 15.407(b) Pass Frequency Stability 47 CFR Part 15, Subpart E 15.407 (g) Pass Transmitter Power Control 47 CFR Part 15, Subpart E 15.407 (h)(1) N/A Note: N/A Mean’s not Application. E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. Report No.: BTEK260423006A01E0102 Page: 4 of 28 3 Contents Page 1 Cover Page ...................................................................................................................................................... 1 2 Test Summary ................................................................................................................................................. 3 3 Contents .......................................................................................................................................................... 4 4 General Information ....................................................................................................................................... 5 4.1 Details of E.U.T. ........................................................................................................................................ 5 4.2 EUT Test Mode and Test Condition .......................................................................................................... 5 4.3 Measurement Uncertainty ......................................................................................................................... 6 4.4 Test Location ............................................................................................................................................. 7 4.5 Deviation from Standards .......................................................................................................................... 7 4.6 Abnormalities from Standard Conditions .................................................................................................. 7 5 Equipment List ................................................................................................................................................ 8 6 Radio Spectrum Technical Requirement ................................................................................................... 10 6.1 Antenna Requirement ...................................................................…

Text truncated - open the document above for the full version.