A2S2012CR108MOBILE PHONE

Color-screen Call Phone User’s Manual Contents 1 General Information.......................................................................................................................2 1.1 Introduction.........................................................................................................................2 1.2 Safety..................................................................................................................................3 1.3 Warning and Notice.............................................................................................................3 1.3.1 Basic Notices....................................................................................................................3 1.3.2 Notices of Your Phone......................................................................................................3 1.3.3 Notices of Battery Use.....................................................................................................4 1.3.4 Notices of Charger Use....................................................................................................5 1.3.5 Care and Maintenance.....................................................................................................5 1.3.6 General Notices...............................................................................................................6 2 Getting Started...............................................................................................................................6 2.1 Overview and Introduction.................................................................................................6 Product Specification................................................................................................................6 2.2 Keypad................................................................................................................................7 2.3 Battery.................................................................................................................................7 2.4 Network Connections..........................................................................................................8 2.4.1 SIM Card..........................................................................................................................8 2.4.2 Insert and Remove the SIM Card.....................................................................................8 2.4.3 Turn Your Phone On or Off..............................................................................................8 2.4.4 Phone unlock....................................................................................................................8 2.4.5 Unlock the SIM Card.......................................................................................................8 2.4.6 Connect to the Network....................................................................................................9 2.4.7 Make Calls.......................................................................................................................9 2.4.8 Make Domestic Calls.......................................................................................................9 2.4.9 Dial Extension..................................................................................................................9 2.4.10 International telephone Calls.......................................................................................10 2.4.11 Dial the Numbers of Phonebook..................................................................................10 2.4.12 Emergency Number......................................................................................................10 2.4.13 Answer Calls................................................................................................................10 2.4.14 Call Records.................................................................................................................11 2 2.4.15 Call Menu....................................................................................................................11 3 Function Menus...........................................................................................................................11 3.1 Use of Function Menus.....................................................................................................11 Scroll Searching and Selection Function................................................................................11 Exit Menus..............................................................................................................................11 3.2 Phonebook........................................................................................................................11 3.3 Messages...........................................................................................................................12 3.3.1 Write Message................................................................................................12 3.3.2 Inbox..............................................................................................................12 3.3.3 Outbox............................................................................................................12 3.3.4 Settings...........................................................................................................12 3.3.5 Memory Status...............................................................................................13 3.3.6 Voice mail.......................................................................................................13 3.3.7 Broadcast Messages.......................................................................................13 3.4 Call Logs...........................................................................................................................13 3.4.1 Call logs.............…

Text truncated - open the document above for the full version.

Cellrunners Distribution Corporation SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Revised wording (current) 1.0 2.0 Sept–25-2007 Cellrunners Distribution Corporation SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 (Jan 18, 2012) To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Cellrunners Distribution Corporation hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): (Product description, model name) FCC ID: A2S2012CR108 Product name: MOBILE PHONE Model: CR108 We affirm that between SIEMIC and Cellrunners Distribution Corporation, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Signature Matthew Mocarski / PRESIDENT Title: PRESIDENT Telephone: 954-571-1976 Email: [email protected] Date: Jan 18, 2012

Cellrunners Distribution Corporation SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 1.0 2.0 August – 11 - 2008 Cellrunners Distribution Corporation SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 2.0 (Jan 18, 2012) To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: A2S2012CR108 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram Long-term confidential - Operation description Long-term confidential - Schematic Long-term confidential - BOM Long-term confidential - Tune up procedure Long-term confidential The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signature Matthew Mocarski / PRESIDENT Title: PRESIDENT Telephone: 954-571-1976 Email: [email protected] Date: Jan 18, 2012 Company Name: Cellrunners Distribution Corporation Address: 1701 Green Road Suite H, Pompano Beach, FL 33064, USA

Top View Bottom View Top View Top View

Label Location

To p Vi e w Bottom View ANTENNA

Compliance Certification Services Inc. Report No:KS120214A03-SF FCCID: N/A Date Issue :February16,2012 Page 1 of 34 Rev. 00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. ANSI/IEEE Std. C95.1-1992 In accordance with the requirements of FCC Report and Order: ET Docket 93-62, and OET Bulletin 65 Supplement C FCC SAR TEST REPORT For Product Name: MOBILE PHONE Brand Name: N/A Model No.: CR108 Series Model: N/A Test Report Number: KS120214A03-SF Issued for Cellrunners Distribution Corporation 1701 Green Road Suite H, Pompano Beach, FL 33064, USA Issued by Compliance Certification Services Inc. Kun shan Laboratory No.10 Weiye Rd., Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China TEL: 86-512-57355888 FAX: 86-512-57370818 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by A2LA or any government agencies. The test results in the report only apply to the tested sample. Compliance Certification Services Inc. Report No:KS120214A03-SF FCCID: N/A Date Issue :February16,2012 Page 2 of 34 Rev. 00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1. CERTIFICATE OF COMPLIANCE (SAR EVALUATION)............................................................3 2. EUT DESCRIPTION......................................................................................................................4 3. REQUIREMENTS FOR COMPLIANCE TESTING DEFINED BY THE FCC................................5 4. TEST METHODOLOGY................................................................................................................5 5. TEST CONFIGURATION....................................................................................................................5 6. DOSIMETRIC ASSESSMENT SETUP.........................................................................................5 6.1 MEASUREMENT SYSTEM DIAGRAM...........................................................................................................7 6.2 SYSTEM COMPONENTS...............................................................................................................................8 7. EVALUATION PROCEDURES..................................................................................................11 8. MEASUREMENT UNCERTAINTY.............................................................................................14 9. EXPOSURE LIMIT......................................................................................................................15 10. EUT ARRANGEMENT................................................................................................................16 10.1 ANTHROPOMORPHIC HEAD PHANTOM..................................................................................................16 10.2 DEFINITION OF THE “CHEEK/TOUCH” POSITION...................................................................................17 10.3 DEFINITION OF THE “TILTED” POSITION................................................................................................18 11. MEASUREMENT RESULTS......................................................................................................19 11.1 TEST LIQUIDS CONFIRMATION................................................................................................................19 11.2 LIQUID MEASUREMENT RESULTS..........................................................................................................19 11.3 SYSTEM PERFORMANCE CHECK............................................................................................................20 11.4 EUT TUNE-UP PROCEDURES AND TEST MODE....................................................................................23 11.5 CONDUCTED OUTPUT POWER................................................................................................................23 11.6 SAR HANDSETS MULTI XMITER ASSESSMENT.....................................................................................24 11.7 EUT SETUP PHOTOS................................................................................................................................25 11.8 SAR MEASUREMENT RESULTS...............................................................................................................26 12. EUT PHOTO................................................................................................................................28 13. EQUIPMENT LIST & CALIBRATION STATUS.........................................................................32 14. FACILITIES.................................................................................................................................33 15. REFERENCES............................................................................................................................33 16. ATTACHMENTS.........................................................................................................................34 Compliance Certification Services Inc. Report No:KS120214A03-SF FCCID: N/A Date Issue :February16,2012 Page 3 of 34 Rev. 00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 1. CERTIFICATE OF COMPLIANCE (SAR EVALUATION) Product Name: MOBILE PHONE Trade Name: N/A Model Name.: CR108 Series Model: N/A Applicant Discrepancy: Initial Devices supporting GPRS： N/A Description Test Modes(worst case ): SIM is a chipset unit and tested as single chipset Device Category: PORTABLE DEVICES Exposure Category: GENERAL POPULATION/UNCONTROLLED …

Text truncated - open the document above for the full version.

GSM 850-Right Head Cheek Middle CH190 ...................................................................................2 GSM 850-Right Head Tilted Middle CH190 ....................................................................................3 GSM 850-Left Head Cheek Middle CH190 .....................................................................................4 GSM 850-Left Head Tilted Middle CH190 ......................................................................................5 GSM 850-Body Up Middle CH190 ..................................................................................................6 GSM 850-Body Down Middle CH190 .............................................................................................7 PCS-1900-Right Head Cheek Middle CH661 ..................................................................................8 PCS-1900-Right Head Tilted Middle CH661 ...................................................................................9 PCS 1900-Left Head Cheek Middle CH661 ...................................................................................10 PCS 1900-Left Head Tilted Middle CH661.................................................................................... 11 PCS1900-Body Up Middle CH661.................................................................................................12 PCS1900-Body Down Middle CH661............................................................................................13 Test Laboratory: Compliance Certification Services Inc. February 15, 2012 GSM 850-Right Head Cheek Middle CH190 DUT: Mobile Phone; Type: CR108; Serial: 358688000000158 Communication System: Generic GSM; Communication System Band: GSM 850 (824.0 - 849.0 MHz); Frequency: 836.6 MHz;Communication System PAR: 9.03 dB Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.89 mho/m; ε r = 41.478; ρ = 1000 kg/m 3 Phantom section: Right Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration: • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2012 • Sensor-Surface: 2.5mm (Mechanical Surface Detection ) • Electronics: DAE4 Sn1245; Calibrated: 1/11/2012 • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609 • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2 (2595) GSM850/Right Head Cheek Middle CH190/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.266 mW/g GSM850/Right Head Cheek Middle CH190/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.995 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 0.316 W/kg SAR(1 g) = 0.239 mW/g; SAR(10 g) = 0.181 mW/g Maximum value of SAR (measured) = 0.252 mW/g Test Laboratory: Compliance Certification Services Inc. February 15, 2012 GSM 850-Right Head Tilted Middle CH190 DUT: Mobile Phone; Type: CR108; Serial: 358688000000158 Communication System: Generic GSM; Communication System Band: GSM 850 (824.0 - 849.0 MHz); Frequency: 836.6 MHz;Communication System PAR: 9.03 dB Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.89 mho/m; ε r = 41.478; ρ = 1000 kg/m 3 Phantom section: Right Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration: • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2012 • Sensor-Surface: 2.5mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 1/11/2012 • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609 • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2 (2595) GSM850/Right Head Tilted Middle CH190/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.242 mW/g GSM850/Right Head Tilted Middle CH190/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.260 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 0.275 W/kg SAR(1 g) = 0.216 mW/g; SAR(10 g) = 0.164 mW/g Maximum value of SAR (measured) = 0.228 mW/g Test Laboratory: Compliance Certification Services Inc. February 15, 2012 GSM 850-Left Head Cheek Middle CH190 DUT: Mobile Phone; Type: CR108; Serial: 358688000000158 Communication System: Generic GSM; Communication System Band: GSM 850 (824.0 - 849.0 MHz); Frequency: 836.6 MHz;Communication System PAR: 9.03 dB Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.89 mho/m; ε r = 41.478; ρ = 1000 kg/m 3 Phantom section: Left Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration: • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2012 • Sensor-Surface: 2.5mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 1/11/2012 • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609 • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2 (2595) GSM850/Left Head Cheek Middle CH190/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.179 mW/g GSM850/Left Head Cheek Middle CH190/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.415 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.220 W/kg SAR(1 g) = 0.171 mW/g; SAR(10 g) = 0.125 mW/g Maximum value of SAR (measured) = 0.192 mW/g Test Laboratory: Compliance Certification Services Inc. February 15, 2012 GSM 850-Left Head Tilted Middle CH190 DUT: Mobile Phone; Type: CR108; Serial: 358688000000158 Communication System: Generic GSM; Communication System Band: GSM 850 (824.0 - 849.0 MHz); Frequency: 836.6 MHz;Communication System PAR: 9.03 dB Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.89 mho/m; ε r = 41.478; ρ = 1000 kg/m 3 Phantom section: Left Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration: • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2012 • Sensor-Surface: 2.5mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 1/11/2012 • Phantom: Twin SAM…

Text truncated - open the document above for the full version.

Test Laboratory: Compliance Certification Services Inc. System Performance Head Check-D850_2012.02.15 DUT: Dipole 850 MHz D835V2; Type: D835V2; SN:4d114 Communication System: CW; Frequency: 850 MHz Medium parameters used: f = 850 MHz; σ = 0.89 mho/m; εBB r BB = 41.53; ρ = 1000 kg/mPP 3 PP Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration: • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2012 • Sensor-Surface: 3mm (Mechanical Surface Detection), Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 1/11/2012 • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609 • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2 (2595) System Performance Check at Frequencies below 1 GHz/d=15mm, Pin=250 mW, dist=3.0mm (EX-Probe)/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.355mW/g System Performance Check at Frequencies below 1 GHz/d=15mm, Pin=250 mW, dist=3.0mm (EX-Probe)/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 58.77 V/m; Power Drift = 0.00052 dB Peak SAR (extrapolated) = 3.594W/kg SAR(1 g) = 2.45 mW/g; SAR(10 g) = 1.57 mW/g Maximum value of SAR (measured) =3.377 mW/g Test Laboratory: Compliance Certification Services Inc. System Performance Body Check-D850_2012.02.15 DUT: Dipole 850 MHz D835V2; Type: D835V2; SN:4d114 Communication System: CW; Frequency: 850 MHz Medium parameters used: f = 850 MHz; σ = 0.99 mho/m; εBBB r BBB = 55.37; ρ = 1000 kg/mPPP 3 PPP Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration: • Probe: EX3DV4 - SN3755; ConvF(9.07, 9.07, 9.07); Calibrated: 1/20/2012 • Sensor-Surface: 3mm (Mechanical Surface Detection), Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 1/11/2012 • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609 • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2 (2595) System Performance Check at Frequencies below 1 GHz/d=15mm, Pin=250 mW, dist=3.0mm (EX-Probe)/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.357mW/g System Performance Check at Frequencies below 1 GHz/d=15mm, Pin=250 mW, dist=3.0mm (EX-Probe)/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 58.74 V/m; Power Drift = 0.0021 dB Peak SAR (extrapolated) = 3.428 W/kg SAR(1 g) = 2.52 mW/g; SAR(10 g) = 1.63 mW/g Maximum value of SAR (measured) = 3.394 mW/g Test Laboratory: Compliance Certification Services Inc. System Performance Head Check-D1900_2012.02.15 DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d136 Communication System: CW; Frequency: 1900 MHz Medium parameters used: f = 1900 MHz; σ = 1.43 mho/m; εBBB r BBB = 41.12; ρ = 1000 kg/mPPP 3 PPP Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration: • Probe: EX3DV4 - SN3755; ConvF(7.84, 7.84, 7.84); Calibrated: 1/20/2012 • Sensor-Surface: 3mm (Mechanical Surface Detection), Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 1/11/2012 • Phantom: SAM1; Type: SAM; Serial: 1609 • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2 (2595) System Performance Check at Frequencies above 1 GHz/d=10mm, Pin=250 mW, dist=3.0mm (EX-Probe) 2/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 10.141 mW/g System Performance Check at Frequencies above 1 GHz/d=10mm, Pin=250 mW, dist=3.0mm (EX-Probe) 2/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 104.61 V/m; Power Drift = 0.0032 dB Peak SAR (extrapolated) = 16.549 W/kg SAR(1 g) = 10.03 mW/g; SAR(10 g) = 5.27 mW/g Maximum value of SAR (measured) = 10.919 mW/g Test Laboratory: Compliance Certification Services Inc. System Performance Body Check-D1900_2012.02.15 DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d136 Communication System: CW; Frequency: 1900 MHz Medium parameters used: f = 1900 MHz; σ = 1.58 mho/m; εBB r BB = 53.47; ρ = 1000 kg/mPP 3 PP Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration: • Probe: EX3DV4 - SN3755; ConvF(7.23, 7.23, 7.23); Calibrated: 1/20/2012 • Sensor-Surface: 3mm (Mechanical Surface Detection), Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 1/11/2012 • Phantom: SAM1; Type: SAM; Serial: 1609 • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2 (2595) System Performance Check at Frequencies above 1 GHz/d=10mm, Pin=250 mW, dist=3.0mm (EX-Probe) 2/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 10.139mW/g System Performance Check at Frequencies above 1 GHz/d=10mm, Pin=xx mW, dist=3.0mm (EX-Probe) 2/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 102.5V/m; Power Drift = 0.0001 dB Peak SAR (extrapolated) = 16.529 W/kg SAR(1 g) = 10.34 mW/g; SAR(10 g) = 5.16 mW/g Maximum value of SAR (measured) = 10.933 mW/g

DASY Calibration Certificate-Extended Dipole-835MHz Calibrations According to KDB 450824 D02, Dipoles must be recalibrated at least once every three years; however, immediate re-calibration is required for the following conditions. The test laboratory must ensure that the required supporting information and documentation have been included in the SAR report to qualify for the extended 3-year calibration interval 1)When the most recent return-loss, measured at least annually, deviates by more than 20% from the previous measurement (i.e. 0.2 of the dB value) or not meeting the required -20 dB return-loss specification 2)When the most recent measurement of the real or imaginary parts of the impedance, measured at least annually, deviates by more than 5 Ω from the previous measurement Dipole Verification plot : D835V2 S/N:4d114 835MHz for Head: 835MHz for Body: D835V2 S/N:4d114 For HEAD Return-Loss (dB) Deviate (dB) Real Impedance (Ω) Deviate (Ω) Imaginary Impedance (Ω) Deviate (Ω) Calibrate Date -29.466 --- 52.262 --- -2.5822 --- 2011-01-10 -29.585 0.119 53.635 1.373 -1.9448 0.6374 2012-01-10 D835V2 S/N:4d114 For BODY Return-Loss (dB) Deviate (dB) Real Impedance (Ω) Deviate (Ω) Imaginary Impedance (Ω) Deviate (Ω) Calibrate Date -25.505 --- 47.585 --- -4.5941 --- 2011-01-10 -25.638 0.133 47.931 0.346 -4.6634 0.0693 2012-01-10 According to up table, the return loss is <-20dB, deviates by less than 20% from the previous measurement ; the Real Impedance and Imaginary Impedance are all within 5 Ω compared to the previous measurement . So, the verification result should extended calibration. DASY Calibration Certificate-Extended Dipole-1900MHz Calibrations According to KDB 450824 D02, Dipoles must be recalibrated at least once every three years; however, immediate re-calibration is required for the following conditions. The test laboratory must ensure that the required supporting information and documentation have been included in the SAR report to qualify for the extended 3-year calibration interval 1)When the most recent return-loss, measured at least annually, deviates by more than 20% from the previous measurement (i.e. 0.2 of the dB value) or not meeting the required -20 dB return-loss specification 2)When the most recent measurement of the real or imaginary parts of the impedance, measured at least annually, deviates by more than 5 Ω from the previous measurement Dipole Verification plot : D1900V2-S/N:5d136 1900MHz for Head: 1900MHz for Body: D1900V2-S/N:5d136 For HEAD Return-Loss (dB) Deviate (dB) Real Impedance (Ω) Deviate (Ω) Imaginary Impedance (Ω) Deviate (Ω) Calibrate Date -21.536 --- 52.740 --- 8.1855 --- 2011-01-04 -21.560 0.024 52.132 0.608 8.8463 0.6608 2012-01-04 D1900V2-S/N:5d136 For BODY Return-Loss (dB) Deviate (dB) Real Impedance (Ω) Deviate (Ω) Imaginary Impedance (Ω) Deviate (Ω) Calibrate Date -21.583 --- 47.227 --- 7.6426 --- 2011-01-05 -21.802 0.219 48.888 1.661 7.3649 0.2777 2012-01-04 According to up table, the return loss is <-20dB, deviates by less than 20% from the previous measurement ; the Real Impedance and Imaginary Impedance are all within 5 Ω compared to the previous measurement . So, the verification result should extended calibration.

Shenzhen Certification Technology Service Co., Ltd. 2F, Building B, East Area of Nanchang Second Industrial Zone, Gushu 2nd Road, Bao'an District, Shenzhen 518126, P.R. China FCC ID: A2S2012CR108 Page 1 of 43 TEST REPORT FCC ID: A2S2012CR108 Applicant：Cellrunners Distribution Corporation Address : 1701 Green Road Suite…

Text truncated - open the document above for the full version.