A3LQL7000LASER PRINTER

FCC CFR47 PART 15 DIGITAL DEVICE TEST REPORT FOR LASER PRINTER MODEL: QWIKLASER 7000 (without network option) QWIKLASER 7000N (with network option) FCC ID: A3LQL7000 REPORT NUMBER: 98E7371 ISSUE DATE: MAY 20, 1998 Prepared for SAMSUNG ELECTRONICS CO., LTD. 416 MAETAN DONG, PALDAL GU SUWON SHI, KOREA Prepared by COMPLIANCE ENGINEERING SERVICES, INC. 1366 BORDEAUX DRIVE SUNNYVALE, CA 94089, USA TEL: (408) 752-8166 FAX: (408) 752-8168 REPORT NO:98E7371 DATE:MAY 20, 1998 FCC ID:A3LQL7000 EUT: LASER PRINTER COMPLIANCE CONSULTING SERVICESDOCUMENT NO:CCSUP4002B2 1366 BORDEAUX DRIVE SUNNYVALE, CA 94089 USA TEL:(408) 752-8166 FAX:(408) 752-8168 This report shall not be reproduced except in full, without the written approval of CCS. TABLE OF CONTENTS PAGE 1.VERIFICATION OF COMPLIANCE..............................................1 2.PRODUCT DESCRIPTION.....................................................2 3.TESTED SYSTEM DETAILS...................................................2 4.TEST FACILITY...........................................................3 5.ACCREDITATION AND LISTING...............................................3 6.MEASUREMENT INSTRUMENTATION.............................................3 7.MEASURING INSTRUMENT CALIBRATION........................................4 8.UNITS OF MEASUREMENT....................................................4 9.ANTENNAS................................................................5 10.CLASSIFICATION OF DIGITAL DEVICE........................................5 11.RADIATED EMISSION LIMITS................................................5 12.CONDUCTED EMISSION LIMITS...............................................6 13.CONDUCTED EMISSION TEST PROCEDURE.......................................7 14.RADIATED EMISSION TEST PROCEDURE........................................7 15.AMBIENT CONDITIONS......................................................9 16.SYSTEM TEST CONFIGURATION...............................................9 17.EQUIPMENT MODIFICATIONS.................................................9 18.EUT SETUP PHOTOS.......................................................10 19.TEST EQUIPMENT LIST....................................................11 20.TEST RESULT SUMMARY....................................................12 APPENDICES ..................................................................14 .EXTERNAL I/O CABLE CONSTRUCTION DESCRIPTION .CONFIGURATION BLOCK DIAGRAM .CONDUCTED EMISSION PLOT .RADIATED EMISSION DATA .EUT PHOTOGRAPHS REPORT NO:98E7371 DATE:MAY 20, 1998 FCC ID:A3LQL7000 EUT: LASER PRINTER 1 OF 20 COMPLIANCE CONSULTING SERVICESDOCUMENT NO:CCSUP4002B2 1366 BORDEAUX DRIVE SUNNYVALE, CA 94089 USA TEL:(408) 752-8166 FAX:(408) 752-8168 This report shall not be reproduced except in full, without the written approval of CCS. 1.VERIFICATION OF COMPLIANCE COMPANY NAME:SAMSUNG ELECTRONICS CO., LTD. 416 MAETAN DONG, PALDAL GU SUWON SHI, KOREA CONTACT PERSON:BEN KIM / MANAGER TELEPHONE NO:408-544-5124 MODEL NO/NAME:QWIKLASER 7000 (Without Network option) QWIKLASER 7000N (Network option) SERIAL NO:N/A DATE TESTED:MAY 20, 1998 TYPE OF EQUIPMENT:INFORMATION TECHNOLOGY EQUIPMENT (ITE) MEASUREMENT DISTANCE:(X) 3 METER ( ) 10 METER TECHNICAL LIMIT: CLASS B without Network Card CLASS A WITH NETWORK CARD FCC RULES:PART 15 MEASUREMENT PROCEDUREANSI C63.4:92 EQUIPMENT AUTHORIZATION PROCEDURE CERTIFICATION MODIFICATIONS MADE ON EUT YES NO DEVIATIONS FROM MEASUREMENT PROCEDURE YES (refer to section 21 for comments) NO RADIATED EMISSION TEST RESULT -4.38 dB@ 72.40 MHz/VERTICAL/Class B CONDUCTED EMISSION TEST RESULT -5.3 dB @ 2.47 MHz/L2 / Class B The above equipment was tested by Compliance Consulting Services for compliance with the requirements set forth in the FCC CFR 47, PART 15. The results of testing in this report apply to the product/system which was tested only. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Approved By MIKE C.I. KUO / VICE PRESIDENT COMPLIANCE CONSULTING SERVICES REPORT NO:98E7371 DATE:MAY 20, 1998 FCC ID:A3LQL7000 EUT: LASER PRINTER 2 OF 20 COMPLIANCE CONSULTING SERVICESDOCUMENT NO:CCSUP4002B2 1366 BORDEAUX DRIVE SUNNYVALE, CA 94089 USA TEL:(408) 752-8166 FAX:(408) 752-8168 This report shall not be reproduced except in full, without the written approval of CCS. 2.PRODUCT DESCRIPTION CHASSIS TYPEPLASTIC CPU SPEEDS TESTED75 MHz LIST OF EACH OSC. OR XTAL. FREQ. (FREQ.>=1 MHz) 50 MHz, 62.76 MHz, 7.372 MHz, 6.94 MHz, 9.54 MHz(LSU) POWER SUPPLY/NAME/MODEL/S.N.BUILT-IN (KOREA ASAHI ELECTRONICS) NUMBER OF PCB LAYERS4, 2, 1 REVISION NOREV 2.1 LINE FILTER NAME AND MODELBUILT-IN POWER REQUIREMENTS120 V AC, 60 Hz NO. OF EXTERNAL I/O CONNECTORS4 PRODUCT OPTION: With Network Card installed as Network Printer. Model Name is assigned as QWIKLASER 7000N. With Network card installed in EUT, QWIKLASER 7000N complied with FCC Class A technical requirement. Radiated and Conducted emission data are in file with Applicant. 3.TESTED SYSTEM DETAILS The Model names for all equipment, plus descriptions of all cables used in the tested system (including inserted cards) are: External Peripheral Devices Device Type ManufacturerModel NumberSerial No.FCC ID / DoC COMPUTERCOMPAQPRESARIO238381-003S3CNT75MEZ6 MONITORSAMSUNGCHA5807LN/ADoC KEYBOARDCOMPAQKPQ-E99ZC237743-333CMYKPQ7285 MOUSECOMPAQMUS9JB01920H67E40EMJMUSJJ MODEMHAYESSMARTEAM 1200N/ABFJ9D907-00038 REPORT NO:98E7371 DATE:MAY 20, 1998 FCC ID:A3LQL7000 EUT: LASER PRINTER 3 OF 20 COMPLIANCE CONSULTING SERVICESDOCUMENT NO:CCSUP4002B2 1366 BORDEAUX DRIVE SUNNYVALE, CA 94089 USA TEL:(408) 752-8166 FAX:(408) 752-8168 This report shall not be reproduced except in full, without the written approval of CCS. 4.TEST FACILITY The open area test sites and conducted measurement facilities used to collect the radiated data are located at 561F Monterey Road, Morgan Hill, California, USA. The sites are constructed in conformance with the requirements of …

Text truncated - open the document above for the full version.