A3LSCH811DUAL MODE CELLULAR PHONE (AMPS/CDMA)

Owner’s Manual Please read this manual before operating the phone, and keep it for future reference. SCH-811 Series CDMA DIGITAL PORTABLE CELLULAR TELEPHONE SCH-811(E-US) 1/20/99 10:32 AM Page ii 3 Introduction 2 Introduction Table of Contents Precautions Getting StartedFeatures 6 Description of Your Phone 7 Screen Display 8 Key Functions 9 Status Indicators 10 Display Messages 11 Battery 12Call Quality 15 Basic Operations Basic Operations of Your Phone 16 Turn On/Off 17 Placing Calls 18 Receiving Calls 19 The MenuMenu Organization 21 Calls Options 24 Sounds Options 26 Display Options 31 Setup Options 33 Phone Book Overview of the Phone Book 36 Storing Phone Numbers 37 Viewing Stored Entries 38 Displaying Your Phone Number 39 Important InformationThis manual is based on the production version of theincluded portable cellular telephone. Softwarechanges may have occurred after this printing.Safety PrecautionFor more detailed safety information, see “Safety” onpage 65. • Do not use your phone while driving; park the vehicle first. • Do not use your phone when near medical equipment. • Do not use your phone at any time while traveling on board a plane. • Do not use your phone where a blasting operation is in progress. • Do not use your phone at a refueling point. FCC/IC NoticeThis device complies with part 15 of the FCC rules.Operation is subject to the following two condition: (1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may causingundesired operation. SCH-811(E-US) 1/20/99 10:32 AM Page 2 5 4 Electronic Devices 66 Aircraft 66 Blasting Areas 66 Other Dangerous Areas 67 Accessories Batteries 68 Dual-Slot Desktop Charger 68 Cigarette Lighter Adapter 68 Travel Charger 68 Hands-Free Car Kit 68 Earbud Headset 68 Glossary of Terms 70 Index 73 Dialing from the Phone Book 39 Editing Phone Book Entries 40 Storing Secret Numbers 40 Erasing Phone Book Entries 41 Electronic Notebook 42 Voice DialVoice Dialing 46 Training the Phone 46 Checking Recorded Name 47 Activation 48 Using Voice Dialing 49 Security Options Security Menu 51 Lock Mode 52 Call Restriction 54 Emergency Numbers 55 Other Options 56 Message ServicesShort Message Services and Voicemail 59 Reviewing Messages 60 Transmitting Messages 63 Safety Compliance with Safety Standards 65 Driving 65 SCH-811(E-US) 1/20/99 10:32 AM Page 4 Getting Started 7 Getting Started 6 FeaturesCongratulations on the purchase of your SAMSUNGPhone. Using the latest digital technology, the phoneoperates in a similar manner to other wireless phones,while providing superior resonance and tone quality.The following options make your phone both fun andeasy to use: • Active Folder• Variable Character Display• Phone Book Memory - 79 Locations• Voice Dialing - 20 Locations• Programmable Lock Code• Short Message Services (SMS) and Voicemail• 9 Ring Types, 4 Melody Tones,Vibrator Alert• Call Logs - 9 Locations Each: Outgoing and Incoming Calls • Pause Dialing• Ringer Mute During Incoming Call• Alarm• EVRC Description of Your PhoneFunction keys and other controls activate the featuresof your phone. The following illustration identifies thefunction keys, controls, and indicators:1) Power On Light2) Earphone Mic Jack3) LCD Screen4) Volume Control5) SEND Key6) Scroll Keys7) Power Key8) Clear Key 9) Microphone10) Folder11) OK (Store) Key12) Menu Key13) End Key14) Messages Key15) Earpiece16) Antenna 2 ABC 3 END/ DEF 5 JKL 6 MNO 4 GHI 8 TUV 9 WXYZ 7 PQRS 0 OPER 1 . ' SEND MENU OK / (not actual size) 1 2 3 4 12 5 6 7 8 9 11 10 6 13 14 15 16 SCH-811(E-US) 1/20/99 10:33 AM Page 6 9 Getting Started 8 Screen DisplayThis phone features dynamic character sizing, whichenables the screen to display from 12 to 16 charactersper line. The five-line screen includes four text linesand one icon line, which displays active options andselected menu items.During conversation, the screen displays the call timerand the name and number of the other party, if available.Active in-use options, such as Mute and CallWaiting, also display during conversation.The following icons display at power-on: Key Functions Press SEND to:• place a call after dialing the number,• answer an incoming call,• initiate Three-way calling,• access Call Logs.Press CLR to:• erase one character at a time while entering names and numbers, • go back one menu level at a time while viewing menu options, Press and hold CLR to:• erase all displayed characters while entering names and numbers, • return to Standby mode while viewing menu options. Press END to:• end a call,• exit the current menu and return to Standby mode. • mute the ringer during an incoming call.• Press and hold END to turn the phone on and off. Press MENU to:• display the Main Menu,• scroll through menus,• enter a pause while entering numbers.Press OK to save menu option settings.Press the arrow keys to scan menuoptions.Press and hold to: • initiate Voice Dialing when the folder isopen. Press and hold to: • switch between bell and vibrator setting. R SEND END/ MENU OK / Signal Strength Vibrator On Digital Battery Strength No Service /In Use Message Roaming (not actual size) SCH-811(E-US) 1/20/99 10:33 AM Page 8 11 Getting Started 10 Press the Volume button to:• adjust voice volume during conversation. • adjust ring volume in Standby mode,• scroll Call Logs and Phone Book entries. Status Indicators Signal Strength Indicates a current signal strength. No Service Indicates that the phone is outside a service area and cannot send or receivecalls. Roaming Displays when the phone is outside the home service area but within the network. Message Indicates messages. Digital Indicates a Digital mode. Vibrate Indicates a Vibrate mode. Battery Charge Indicates a battery charge level. R D Display Messages MAINTENANCE The phone number is not registered in REQUIRED the base station. PHONE BOOK You have tried to access the memory RESTRICTED while the phone is in the memory restricted mode. New …

Text truncated - open the document above for the full version.

March 08, 1999 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: We, the undersigned, hereby authorize PCTEST Engineering Laboratory inc., to act as on our agent in behalf of all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by PCTEST Engineering Laboratory, inc. on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C.853(a) Sincerely, Ben Kim Engineering Manager Samsung Electronics America

Mar 08, 1999 Federal Communications Commission Authorization and Evaluation Div. Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In Re:Samsung Electronics Co., Ltd. FCC ID: A3LSCH811 Dual-Mode Cellular Phone (AMPS/CDMA) FCC Part 22 Certification Request for Confidentiality To whom it may concern: In accordance with 0.459 of CFR 47, Samsung Electronics Co., Ltd. requests confidentiality of the Block Diagram(s), Schematic Diagrams, and Circuit Description for the attached test report. These documents contains detailed system and equipment description and related information about the product which Samsung Electronics Co., Ltd. considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, Samsung feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Sincerely, Ben Kim Engineering Manager Samsung Electronics America

AFFIDAVIT FOR ESN PROTECTION OF CELLULAR MOBILE TELEPHONES We hereby certify that the Portable Cellular Telephone (FCC ID:A3LSCH811) is so designed that it complies with all the requirements for ESN protection specified in Sec.22.919 of the FCC Rules. a) The transmitter in service has a unique ESN. b) The ESN host component is permanently attached to a main circuit board of the mobile transmitter and the integrity of the unit operating software cannot be altered. The ESN is plated from fraudulent contact and tampering. The ESN is encoded using multiplication by a polynomial and the ESN data programmed in the memory with other information. c) The ESN is factory set and cannot be altered, transferred, removed or otherwise able to be manipulated. Cellular mobile equipment is specifically designed such that any attempt to remove, tamper with, or change the ESN chip, its logic system, or firmware originally programmed by the manufacturer will render the mobile transmitter inoperative. Sincerely, Ben Kim Engineering Manager Samsung Electronics America

March 03, 1999 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT:SAMSUNG ELECTRONICS CO., LTD. FCC ID: A3LSCH811 Part 22 Certification Gentlemen: Attached herewith, on behalf of SAMSUNG ELECTRONICS CO., LTD. is an application for Part 22 Certification of the following dual mode cellular phone (AMPS/CDMA): FCC ID:A3LSCH811 TRADE / MODEL(s):SAMSUNG SCH-811 EUT TYPE:Non-Broadcast Transmitter Held to Ear (TNE) Tx Freq. Range:824.04 – 848.97 MHz (AMPS) / 824.64 – 848.37 MHz (CDMA) Rx Freq. Range:869.04 – 893.97 MHz (AMPS) / 869.64 – 893.37 MHz (CDMA) Max. Output Power:0.5 Watts ERP (AMPS) / 0.32 Watts ERP (CDMA) Attached is the applicant’s Letter of Authorization, Confidentiality Request, ESN Affidavit, measurement report data and plots, RF Exposure measurement report, FCC ID label and location, test setup photographs, internal and external photographs, block diagrams (confidential), schematic diagrams & circuit description (confidential), operational description, parts list & tune-up procedure, and the user's manual. Should you have any questions or comments concerning the above, please contact the undersigned. cc:Mr. Ben Kim Engineering Manager SAMSUNG Electronics Co., Ltd.

Test Report S/N: 22.990128063.A3LFCC Part 22 Test Date(s): February 22-26, 1999Certfication © 1998 PCTEST LabFCC ID: A3LSCH811 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. Test Report S/N: 22.990128063.A3LFCC Part 22 Test Date(s): February 22-26, 1999Certfication © 1998 PCTEST LabFCC ID: A3LSCH811 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. Test Report S/N: 22.990128063.A3LFCC Part 22 Test Date(s): February 22-26, 1999Certfication © 1998 PCTEST LabFCC ID: A3LSCH811 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. Test Report S/N: 22.990128063.A3LFCC Part 22 Test Date(s): February 22-26, 1999Certfication © 1998 PCTEST LabFCC ID: A3LSCH811 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. Test Report S/N: 22.990128063.A3LFCC Part 22 Test Date(s): February 22-26, 1999Certfication © 1998 PCTEST LabFCC ID: A3LSCH811 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd.

© 1999 PCTEST Lab FCC ID SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS PER §§ 2.925 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase. Fig 12. Sample label (SEE NEXT PAGE) MODEL NO: SCH-811 SERIAL NO.: FCC ID: A3LSCH811 I I MADE IN KOREA 1

1-1GENERAL FreqencyRange Transmitter Receiver DigitalMode 824~849MHz 869~894MHz AnalogMode 824~849MHz 869~894MHz ChannelSpacing1.23MHz30KHz NumberofChannels20FA832CHs DuplexSpacing45MHz FrequencyStability+2.5ppm(-20 °... ~+60 °... ,-4 ¢μ ~+140 ¢μ ) OperatingTemperature-20 °... ~+60 °... (-4 ¢μ ~+140 ¢μ ) OperatingVoltage HHP Hands-Free 3.6VDC( °æ 10%) 13.7VDC( °æ 10%) SizeandWeight88x56x22/32mm OperatingTime StandbyTime TalkTime DigitalMode 61~70hours upto150minutes AnalogMode 7~8hours upto150minutes 1-2ANALOGMODE TRANSMITTER RFoutputpower0.6W(+2/-4dB) CarrierON/OFFconditions "ON"Condition "OFF"Condition within °æ 3dBofspecificationoutput(in2mS) below-60dBm(in2mS) Compressor CompressionRate AttackTime RecoveryTime ReferenceInput 2:1 3mS 13.5mS Inputlevelforproducinganominal °æ 2.9KHz peakfreqencydeviationoftransmittedcarrier Preamphasis6dB/OCTwithin0.3~3KHz MaximumFreqencyDeviation F3ofG3 SupervisoryAudioTone SignalingTone WidebandData °æ 12KHz °æ 2KHz( °æ 10%) °æ 8KHz( °æ 10%) °æ 8KHz( °æ 10%) PostDeviationLimiterFilter 3.0~5.9KHz 5.9~6.1KHz 6.1~15KHz Over15KHz above40LOG(F/3000)dB above35dB above40LOG(F/3000)dB above28dB SpectrumNoiseSuppression Forallmodulation f0+20KHz~f0+45KHz FormodulationbyvoiceandSAT f0+45KHz FormodulationbyWBD(withoutSAT) andST(withSAT) f0+45KHz~f0+60KHz f0+60KHz~f0+90KHz f0+90KHz~2f0 above26dB above63+10LOG(PY)dB above45dB above65dB above63+10LOG(PY)dB (wheref0=carrierfrequency PY=meanoutputpowerinwatts) HarmonicandconductedSpuriousEmissionsbelow43+10LOG(PY)dB RECEIVER De-Emphasis-6dB/OCTwithin0.3~3KHz Expander ExpanderRate AttackTime RecoveryTime ReferenceInput 1:2 within3mS within13.5mS outputleveltoa1000Hztonefromacarrier within °æ 2.9KHzpeakfrequencydeviation Sensitivity12dBSINAD/-116dBm IntermodulationSpuriousResponseAttenuationavove65dB RSSIRangeabove60dB ProtectionAgainstSpuriousResponse Interference above60dB InBandConductedSpuriousEmission TransmitBand ReceiveBand OtherBand below-60dBm below-80dBm below-47dBm RadiatedSpuriousEmission FrequencyRange 25~70MHz 70~130MHz 130~174MHz 174~260MHz 260~470MHz 470~1GHz MaximumAllowableEIRP -45dBm -41dBm -41~-32dBm -32dBm -32~-26dBm -21dBm 1-3DIGITALMODE WaveformQuality0.944ormore TimeReference °æ 1uSorless RxSensitivityandDynamicRange-104dBm,FER=0.5%orless -25dBm,FER=0.5%orless TxOutputPower320mW(25dBm) TxFrequencyDeviation °æ 300Hzorless OccupiedBandWidth1.32MHz TxConductedSpuriousEmission900KHz:-42dBc/30KHzbelow 1.98MHz:-54dBc/30KHzbelow MinimumTxPowerControlbelow-50dBm OpenLoopPowerControl-25dBm:-57.0dBm~-38.5dBm -65dBm:-17.5dBm~+1.5dBm -104dBm:+18.0dBm~+30.0dBm StandbyOutputPowerbelow-61dBm ColsedLoopTxPowerControlRangeTest1: °æ 24dBorless Test2:0mS~2.5mS Test3: °æ 24dBormore Test4: °æ 24dBormore Test5: °æ 24dBormore 1-4FREQUENCYRANGE Transmitter Frequency FANO.AMPSCHNO. Center Frequency FANO.AMPSCHNO. Center Frequency 11011824.640MHz11404837.120MHz 229825.870MHz12445838.350MHz 370827.100MHz13486839.580MHz 4111828.330MHz14527840.810MHz 5152829.560MHz15568842.04MHz 6193830.790MHz16609843.270MHz 7234832.020MHz17650844.500MHz 8275833.250MHz18697845.910MHz 9316834.480MHz19738847.140MHz 10363835.890MHz20779848.370MHz Receiver Frequency FANO.AMPSCHNO. Center Frequency FANO.AMPSCHNO. Center Frequency 11011869.640MHz11404882.120MHz 229870.870MHz12445883.350MHz 370872.100MHz13486884.580MHz 4111873.330MHz14527885.810MHz 5152874.560MHz15568887.04MHz 6193875.790MHz16609888.270MHz 7234877.020MHz17650889.500MHz 8275878.250MHz18697890.910MHz 9316879.480MHz19738892.140MHz 10363880.890MHz20779893.370MHz 3-1FrequencySynthesizerCircuit TheFrequencysynthesizerisanindirectfrequencysynthesizerPLL(PhasedLockedLoop).Itconsistsofa VCTCXO(U305),PLLIC(U306),VCO(U307)andloopfilter. VCTCXO TheVCTCXO(U305)isareferencesourceofthefrequencysynthesizer.Itprovides19.68MHzreferencefrequency toPLL.TheVCTCXOisaVoltageControlledTemperatureCompensatedCrystalOscillatorhaving 19.68MHz °æ 2.5ppmfrequencystabilityoverallusefultemperaturerange. Acorrectfrequencytuningismadebythevoltagecontrol. VCO TheVCO(U307)generatesthesignalhaving966 °æ 12.5MHzcenterfrequencywiththevoltagecontrol. PLLICcontrolsthissignal. PLL IC ThePLLIC(U306)includesprescalersandchargepump.ThereferencedividerinPLLICdividesthefrequencyof VCTCXOby656andmakesreferencefrequencyto30KHz. Thisreferencefrequencyissuppliedtooneoftheinputofphasedetector.ThesignalgeneratedatVCOgoesinto anotherinputstageofthephasedetectorthroughaprescalerandthemaindivider.Atthispoint,theerror proportionaltothephasedifferenceoftwoinputsisoccurred.Thiserrorsignalissuppliedtothefrequency controlinputstageofVCOthroughtheloopfiltercomposedofRC. 3-2SpuriousRadiationSuppressionCircuit Thespurioussignalfromantennaissuppressedattheduplexer.Theduplexerhasaflat characteristicstothereceivesignalandahighattenuationcharacteristicstotheharmonicsignals oftransmission.So,itsuppressthespuriousradiation Table1.Thecharacteristicofduplexerfilter(F300) TX CenterFrequency836.5MHz(FT) BandwidthFT °æ 12.5MHz InsertionLossatBW3.0dBMax VSWRatBW1.7Max InputPower2WMax Attenuation (AbsoluteValue) 869~894MHz40dBMin 1648~1698MHz27dBMin 2472~2547MHz30dBMin RippleatBW2.0dBMax RX CenterFrequency881.5MHz(FR) BandwidthFR °æ 12.5MHz InsertionLossatBW4.0dBMax VSWRatBW1.8Max InputPower1WMax Attenuation(AbsoluteValue)824~849MHz50dBMin RippleatBW2.0dBMax

NODESCRIPTIONSEC.CODEREMARK - Capacitors - C100C-CERAMIC,CHIP;10nF2203-000254 C101C-CERAMIC,CHIP;8.2nF2203-001210 C102C-CERAMIC,CHIP;220pF2203-000585 C103C-CERAMIC,CHIP;100pF2203-000233 C104C-CERAMIC,CHIP;470pF2203-000940 C105,C106C-CERAMIC,CHIP;100pF2203-000233 C108C-TA,CHIP;33uF,6.3V2404-001032 C109C-CERAMIC,CHIP;100nF2203-005061 C110C-TA,CHIP;10uF,6.3V2404-001064 C111,C112C-CERAMIC,CHIP;100nF2203-005061 C115C-CERAMIC,CHIP;100nF2203-005061 C116C-CERAMIC,CHIP;10nF2203-000254 C117C-TA,CHIP;1uF,10V2404-001017 C118,C119C-CERAMIC,CHIP;10nF2203-000254 C120C-CERAMIC,CHIP;470pF2203-000940 C121,C122C-CERAMIC,CHIP;100pF2203-000233 C123C-CERAMIC,CHIP;470pF2203-000940 C125C-TA,CHIP;33uF,6.3V2404-001032 C126C-CERAMIC,CHIP;100nF2203-005061 C127C-CERAMIC,CHIP;10nF2203-000254 C128,C129C-CERAMIC,CHIP;100nF2203-005061 C130C-CERAMIC,CHIP;100pF2203-000233 C131C-TA,CHIP;100uF,6.3V2404-001057 C132C-CERAMIC,CHIP;100nF2203-005061 C133C-CERAMIC,CHIP;1nF2203-000438 C134C-CERAMIC,CHIP;100nF2203-005061 C135C-CERAMIC,CHIP;470pF2203-000940 C136C-TA,CHIP;10uF,6.3V2404-001064 C137C-CERAMIC,CHIP;100nF2203-005061 C138C-TA,CHIP;10uF,6.3V2404-001064 C139C-CERAMIC,CHIP;1uF2203-005065 C151C-CERAMIC,CHIP;1nF2203-000438 C152C-CERAMIC,CHIP;100pF2203-000233 C153C-CERAMIC,CHIP;1nF2203-000438 C154C-CERAMIC,CHIP;100pF2203-000233 C155C-CERAMIC,CHIP;100nF2203-005061 C156C-CERAMIC,CHIP;100pF2203-000233 C158,C159C-CERAMIC,CHIP;10nF2203-000254 C160C-CERAMIC,CHIP;1nF2203-000438 C161C-CERAMIC,CHIP;100nF2203-005061 C162R-CHIP;47Kohm2007-000157 C163C-CERAMIC,CHIP;100nF2203-005061 C164C-CERAMIC,CHIP;10nF2203-000254 NODESCRIPTIONSEC.CODEREMARK C166C-CERAMIC,CHIP;47pF2203-000995 C167C-CERAMIC,CHIP;1.5nF2203-000138 C168,C169C-CERAMIC,CHIP;100nF2203-005061 C170C-CERAMIC,CHIP;10nF2203-000254 C171C-CERAMIC,CHIP;100nF2203-005061 C180C-TA,CHIP;1uF,10V2404-001017 C181R-CHIP;0ohm2007-000171 C182-C185C-CERAMIC,CHIP;10nF2203-000254 C186C-CERAMIC,CHIP;47pF2203-000995 C187C-CERAMIC,CHIP;470pF2203-000940 C188C-CERAMIC,CHIP;47pF2203-000995 C190-C196C-CERAMIC,CHIP;47pF2203-000995 C198C-CERAMIC,CHIP;47pF2203-000995 C197C-CERAMIC,CHIP;100nF2203-005061 C199C-CERAMIC,CHIP;47pF2203-000995 C200C-CERAMIC,CHIP;100nF2203-005061 C201,C202C-CERAMIC,CHIP;47pF2203-000995 C203,C204OPEN_COPEN_C C205-C210C-CERAMIC,CHIP;47pF2203-000995 C211C-CERAMIC,CHIP;100nF2203-005061 C220-C222C-CERAMIC,CHIP;100nF2203-005061 - Diodes - D101DIODE-TVS;SM050406-001005 D102,D103DIODE-ARRAY;KDS2260407-000122 D104DIODE-ARRAY;DA204U0407-000102 D107DIODE-SWITCHING;MCL41480401-001052 D109DIODE-RECTIFIER;UPS5819-TR130402-001207 D110LED-CHIP,SML-020MLT0601-001130 D111,D112DIODE-TVS;SMS05C0406-001051 D120-D127LED;CHIP,Y-GRN,SLS-NNYG101TS0601-001094 D128,D129DIODE-TVS;SMS05C0406-001051 D130DIODE-TVS;SM050406-001005 D135DIODE-TVS;SMS05C0406-001051 - Connectors - J102JACK-AC POWER;HSJ1621-0190103722-001172 J104CONNECTOR-HEADER;AXK6S60535J3711-004027 J105CONNECTOR-FPC/FC/PIC;IL-FPR-22S-HF-E30003708-001295 J110CONNECTOR-SOCKET;MQ179A-SAA-18P/43710-001429 - Coils - L101INDUCTOR-SMD;10uH2703-001563 L105INDUCTOR-SMD;1uH2703-000300 - Transistors - Q101TR-DIGITAL;RN21040504-000172 Q103FET-SILICON;SI3443DV0505-001165 NODESCRIPTIONSEC.CODEREMARK Q104FET-SILICON;SI6803DQ0505-001185 Q106TR-DIGITAL;RN11040504-000168 Q107TR-SMALL SIGNAL;2SC4081BRT1060501-000218 Q119TR-SMALL SIGNAL;MMBT2222ALT10501-000457 Q120TR-DIGITAL;RN21040504-000172 Q121TR-SMALL SIGNAL;MMBT2222ALT10501-000457 Q123TR-SMALL SIGNAL;MMBT2222ALT10501-000457 Q124TR-SMALL SIGNAL;2SA15760501-000162 Q125,Q126TR-DIGITAL;RN11040504-000168 - Resistors - R100R-CHIP;4.7Kohm2007-000143 R101R-CHIP;20Kohm2007-000152 R102R-CHIP;2.2Kohm2007-000141 R103,R104R-CHIP;1Kohm2007-000140 R105,R106R-CHIP;100ohm2007-000138 R107R-CHIP;22Kohm2007-000153 R108R-CHIP;1Kohm2007-000140 R109R-CHIP;120Kohm2007-000163 R110R-CHIP;43KOHM2007-007101 R111R-CHIP;100Kohm2007-000162 R112 OPEN_ROPEN_R R113R-CHIP;1Mohm2007-000170 R114R-CHIP;2.7Kohm2007-000142 R115R-CHIP;1.5Kohm2007-000242 R116,R117R-CHIP;1Kohm2007-000140 R120R-CHIP;10Kohm2007-000148 R121OPEN_ROPEN_R R122R-CHIP;1.5Kohm2007-000242 R123R-CHIP;11Kohm,1%2007-007671 R124R-CHIP;15Kohm2007-000151 R125R-CHIP;1Kohm2007-000140 R126OPEN_ROPEN_R R127R-CHIP;33Kohm2007-000775 R128R-CHIP;1Kohm2007-000140 R129-R131R-CHIP;100ohm2007-000138 R132R-CHIP;22Kohm2007-000153 R133R-CHIP;470ohm2007-000932 R134,R135R-CHIP;100Kohm2007-000162 R136R-CHIP;10Kohm2007-000148 R137R-CHIP;100ohm2007-000138 R138R-CHIP;56Kohm2007-000159 R139R-CHIP;15Kohm2007-000151 R141R-CHIP;100Kohm2007-007107 R142R-CHIP;68Kohm,1%2007-007589 NODESCRIPTIONSEC.CODEREMARK R144R-CHIP;6.8Kohm2007-000146 R145,C162R-CHIP;47Kohm2007-000157 R146-R148R-CHIP;100Kohm2007-000162 R149R-CHIP;4.7Kohm2007-000143 R150R-CHIP;22Kohm2007-000153 R151R-CHIP;100Kohm2007-000162 R152,R153R-CHIP;150Kohm2007-000164 R154R-CHIP;200Kohm2007-000165 R155R-CHIP;5.6Kohm2007-000982 R168-R171R-CHIP;51ohm2007-001298 R172-R178R-CHIP;100Kohm2007-000162 R181R-CHIP;1Kohm2007-000140 R182R-CHIP;10Kohm2007-000148 R183R-CHIP;1Kohm2007-000140 R184,R185R-CHIP;10Kohm2007-000148 R186R-CHIP;0ohm2007-000171 R187R-CHIP;10Kohm2007-000148 R188R-CHIP;100ohm2007-000138 R189R-CHIP;22Kohm2007-000153 R190R-CHIP;100Kohm2007-000162 R210R-CHIP;47Kohm2007-000157 R211R-CHIP;22Kohm2007-000153 R212R-CHIP;33ohm2007-001292 R213R-CHIP;13KOHM2007-007015 R214R-CHIP;39Kohm2007-000831 R215,R216R-CHIP;22Kohm2007-000153 R217R-CHIP;4.7Kohm2007-000143 R218R-CHIP;150ohm2007-001306 R220R-CHIP;150ohm2007-001306 R221,R222OPEN_ROPEN_R R223R-CHIP;4.7Kohm2007-000143 R224R-CHIP;1Kohm2007-000140 R225R-CHIP;33ohm2007-001292 R230R-CHIP;1Kohm2007-000140 R250R-CHIP;4.7ohm2007-001284 - IC's - S1SWITCH-REED;P3F-1G3409-001039 U101IC-DATA COMM./GEN.;MSM2300-196PBGA-MT1205-001517 U102IC-ENCODER/DECODER;ST5092TQ1204-001375 U103IC-VOLTAGE COMP.;TC75W56FU1202-001022 U104IC-EEPROM;24LC256T-I/SM1103-001131 U105IC-PWM CONTROLLER;SI91611203-001434 U106IC-VOLTAGE REGULATOR;MIC5219-3.3BM51203-001518 U107IC-VOLTAGE REGULATOR;MIC5205-3.3BM51203-001256 NODESCRIPTIONSEC.CODEREMARK U10…

Text truncated - open the document above for the full version.

NAMProgramming NAMfeaturescanbeprogrammedasfollows: Notes: -IfyouentertheNAMprogrammode,eachitemshowsthecurrentlyOKreddata.Gotothenextitemby pressing OK . -Youcanmodifythedatabyenteringanewdata. -Ifyouenterawrongdigit,press CLR todeletethelastdigit.Pressandhold CLR todeletealldigits. -Toscrollitemsbackwardsorforwards,pressthe VOLUME buttonontheleftsideofthephone. 4-1GeneralSetup LCDDisplay KeyinFunction 47*869#08#9-selectsNAMprogramming NAMprogram1-choose'GENERAL' 1:General 2:SetupNAM1 3:SetupNAM2 ESNVolume °Â -ElectronicSerialNumberofthephoneisdisplayed E9031F77 CAIversionVolume °Â -CommonAirInterfaceversionisdisplayed 3 VOC13K/8K SO_VOICE_08KVolume °Â -VocoderRate SCMVolume °Â -StationClassMarkdisplaysthepowerclass, 01101010transmission,slottedclass,dualmode. LockCodeLockcode,currentststusisdisplayed 00004-digitcode-tochange,enternewcode. OK -storeit SlotModeSlotmode.'Yes'indicatestheslotmode. Yes ¢∏ or ¢∫ - changesthestatus. OK -storeit. SlotIndexSlotmodeindex.Thehigher,thelongersleepingtime 2 0-7 -tochange,enternewone. OK -storeit. PrefNAM(1~4)...PreferredsystemselectionforNAM(1~4). Digitalpref ¢∏ or ¢∫ UptofourNAMsareallowedforthephone.Thislists OK oneofthefourNAMsandallowsyoutoprogramboth theFMandCDMAsettings. 4-2SettingUpNAM1 LCDDisplayKeyinFunction NAMProgram2-Choose'SetupNAM1.' 1:General 2:SetupNAM1 3:SetupNAM2 SetupNAM11-Choose'Phone#' 1:Phone# 2:FM 3:CDMA Phone#-directorynumber 1234567890Phonenumber-tochange,enternewone. OK -storeit. MobileID#-Phonenumbercurrentlyused. 1234567890Phonenumber-tochange,enternewone. OK -storeit. SetupNAM12-Choose'Phone#' 1:Phone# 2:FM 3:CDMA FMHOMESIDSystemIDforhome,currentststusisdisplayed. 4369IDnumber-tochange,enternewone. OK -storeit. FM1stChnCurrent1stpagingchannel. 333Channelnumber-tochange,enternewone. OK -storeit. FMAcqSID1AcquisitionsystemID1,currentstatusisdisplayed. 4IDnumber-tochange,enternewone. OK -storeit. FMAcqSID2AcquisitionsystemID2,currentstatusisdisplayed. 0IDnumber-tochange,enternewone. OK -storeit. FMLockSID1LocksystemID1,currentstatusisdisplayed. 0IDnumber-tochange,enternewone. OK -storeit. LCDDisplayKeyinFunction AutoRegFMRegistration,currentstatusisdisplayed. - changesthestatus . Yes ¢∏ or ¢∫ 'YES'toenable,'NO'todisable. OK -storeit. FMpreq...Preferredsystemselection,currentstatusisdisplayed. - changesthesystem . Aonly ¢∏ or ¢∫ 'YES'toenable,'NO'todisable. OK -storeit. FMACCOLCCurrentAccessOverloadClass. 0 ¢∏ or ¢∫ - changesthesystem . OK -storeit. SetupNAM13-choose'CDMA' 1:Phone# 2:FM 3:CDMA IMSI_MCCIMSIMobleCountryCode,currentcodeisdisplayed. 000number-tochange,enternewone. OK -storeit. IMSI_MNCIMSIMobileNetworkCode,currentcodeisdisplayed. 00number-tochange,enternewone. OK -storeit. CDMApref..Preferredsystemselection,currentsystemisdisplayed. Aonly ¢∏ or ¢∫ -changesthesystem. OK -storeit. CDMAACCOLCCDMAAccessOverloadClass,currentstatusisdisplayed. 0classnumber-tochange,enternewone. OK -storeit. PchnSysAPreferredchannelcurrentlyusedundersystemA 779channelnumber-tochange,enternewone. OK -storeit. PchnSysBPreferredchannelcurrentlyusedundersystemB 779channelnumber-tochange,enternewone. OK -storeit. SchnSysASecondchannelcurrentlyusedundersystemA 738channelnumber-tochange,enternewone. OK -storeit. LCDDisplayKeyinFunction SchnSysBSecondchannelcurrentlyusedundersystemB 738channelnumber-tochange,enternewone. OK -storeit. CDAcqSID11stAcquisitionsystemID,currentstatusisdisplayed. 0IDnumber-tochange,enternewone. OK -storeit. CDlockSID11stlocksystemID,currentstatusisdisplayed. 0IDnumber-tochange,enternewone. OK -storeit. CDMAHomeSIDCDMAHomesystemID,currentstatusisdisplayed Yes ¢∏ or ¢∫ - changesthestatus. OK -storeit. CDMAfSIDCDMAforeignSID,currentstatusisdisplayed. Yes ¢∏ or ¢∫ - changesthesystem. OK -storeit. CDMAfNIDCDMAforeignNID,currentstatusisdisplayed. Yes ¢∏ or ¢∫ - changesthesystem. OK -storeit. SID#1firstSIDwritteninthelist,currentstatusisdisplayed. 2222number-tochange,enternewone. OK -storeit. NID#1firstNIDwritteninthelist,currentstatusisdisplayed. 1number-tochange,enternewone. OK -storeit. SID#22ndSIDwritteninthelist,currentstatusisdisplayed. 2222number-tochange,enternewone. OK -storeit. NID#22ndNIDwritteninthelist,currentstatusisdisplayed. 2number-tochange,enternewone. OK -storeit. SID#33rdSIDwritteninthelist,currentstatusisdisplayed. 2222number-tochange,enternewone. OK -storeit. NID#33rdSIDwritteninthelist,currentstatusisdisplayed. 3number-tochange,enternewone. OK -storeit. SID#44thSIDwritteninthelist,currentstatusisdisplayed. 2222number-tochange,enternewone. OK -storeit. LCDDisplayKeyinFunction NID#44thNIDwritteninthelist,currentstatusisdisplayed. 15number-tochange,enternewone. OK -storeit. SetupNAM1LCDreturnstotheNAM1setupmode. 1:Phone# 2:FM 3:CDMA 6.TestProcedure TestCommandList ListofEquipment -DCPowerSupply -TestJig -TestCable -CDMAMobileStationTestSetHP8924C,HP83236A,CMD-80,etc -SpectrumAnalyzer(includeCDMATestMode)HP8596E ConfigurationofTest °ÿ CAUTION:Becausethereistheloss(0.33VatFMMaxPower)ofthetestjigandDatacable, you'dbetterinput3.93VtotheDCPowerSupplytouse3.6V(Batterynormalvoltage) atCellularphone Spectrum Analyzer Directional Coupler DC Power Supply (+3.93V) RF In HP8924C RF In/Out Audio Out Audio In Test Jig To A-Out To A-In TESTCABLEDESCRIPTIONFORSCH-811 1.TESTCABLE 2.TESTCABLECONNECTIONS 1MHC172 2RFCABLE(1.4dBLoss) 3BNCCONNECTOR(RF) 4PLUGCONNECTTOSCH-811 5DATACABLE 6Dsub25PINCONNECTOR(DATA) ChangetoTestMode A.Tochangethephone'sstatefromNormalModetoTestMode,Youshouldenterthefollowingkeys. "*759#813580" B.Thecommand °∞ 01"isSuspend. C.TofinishtheTestMode,Youshouldenterthecommand"02". *Note:Makesuretochangeto"Digitalonly"or"Analogonly"modeinNAM1, ESTMODE.(Referto4.NAMProgramming) ChannelSelectionandTxPowerOutputLevelControl 1.DigitalMode(CDMA) A.EntertoTestMode(*759#813580). B."01":Suspend. C."09 0363#":Setto'0363'channel. D."07":CarrierOn. E."34":Spreadspectrumto1.23MHzbandwidth. F."71 275#":OutputRFpowerlevelsetting. "275"meansAGClevelandAGClevelrangeisfrom0to511. 2.AnalogMode(FM) A.EntertoTestMode(*759#8…

Text truncated - open the document above for the full version.

© 1999 PCTEST Engineering Lab., Inc. PCTEST Engineering Laboratory, Inc. 6660-B 6660-B DobbinDobbin Road Road •• Columbia, MD 21045 Columbia, MD 21045 •• U.S.A. U.S.A. TEL (410) 290-6652 TEL (410) 290-6652 •• FAX (410) 290-6654 FAX (410) 290-6654 http://www.pctestlab.comhttp://www.pctestlab.com CERTIFICATE OF COMPLIANCE (SAR EVALUATION) SAMSUNG ELECTRONICS CO., LTD.Dates of Tests: February 22-26, 1999 416 Maetan-3 Dong, Paldal-KuTest Report S/N: SAR.990128064.A3L Suwon City, Kyungki-Do 441-742, KOREATest Site: PCTEST Lab, Columbia MD Attention: D. H. KIM, General Manager FCC ID A3LSCH811 APPLICANT SAMSUNG ELECTRONICS CO., LTD. EUT Type:Dual Mode Cellular Phone (AMPS/CDMA) Tx Frequency:824.04 – 848.97 MHz (AMPS) / 824.64 – 848.37 MHz (CDMA) Rx. Frequency:869.04 – 893.97 MHz (AMPS) / 869.04 – 893.37 MHz (CDMA) Max Output Power:0.48 W Conducted (AMPS) / 0.3 W Conducted (CDMA) Trade Name/Model(s):SAMSUNG SCH-811 FCC Classification:Non-Broadcast Transmitter Held to Ear (TNE) Application Type:Certification Serial Number:n/a (pre production) FCC Rule Part(s):2.1093; ET Docket 96.326; 22(H) This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (S…

Text truncated - open the document above for the full version.