A3LSCHN485Dual-Band CDMA Phone

* Some of the contents of this manual may differ from your phone, depending on the software installed or your service provider. World Wide Webhttp://www.samsungmobile.com Printed in Korea Code No.: GH68-XXXXX English. 0 3 /2005. Rev .1.0 ELECTRONICS PORTABLE CELLULAR TELEPHONE SCH-N485 User’s Manual (Draft version) Please read this manual before operating your phone, and keep it for future reference. 3 Table of contentsImportant safety precautions .......................7Unpacking .....................................................9Your phone .................................................10Phone layout...................................................... 10Display.............................................................. 11Backlight ........................................................... 13Camera............................................................. 13Getting started............................................14Using the battery................................................ 14Switching on or off the phone............................... 16Using the soft keys ............................................. 17Your phone’s modes............................................ 17Call functions ..............................................19Making a call...................................................... 19Ending a call ...................................................... 20Emergency dialing .............................................. 20Using the recent call logs..................................... 21Making a call from Contacts ................................. 21Prepend dialing .................................................. 22Speed dialing ..................................................... 22Four-digit dialing ................................................ 22Pause dialing ..................................................... 23Adjusting the volume during a call ........................ 25Answering a call ................................................. 26Silencing a call ringer.......................................... 26Viewing missed calls ........................................... 27Options during a call ........................................... 27Using caller ID ................................................... 28Call forwarding................................................... 28Call waiting........................................................ 29Three-way calling ............................................... 29Entering text ...............................................30Changing the text input mode .............................. 31Using T9 (English) mode...................................... 31Using Alphabet mode .......................................... 31Using Symbol mode ............................................ 32Using Number mode ........................................... 32 Table of contents 4 Using the menus .........................................33Accessing a menu function by scrolling .................. 33Using shortcuts .................................................. 34List of menu functions ......................................... 35Calls ............................................................38Outgoing (Menu 1-1) ........................................... 38 Incoming (Menu 1-2) ........................................... 38 Missed (Menu 1-3) ............................................... 38 Erase History (Menu 1-4) ..................................... 39 Air Time (Menu 1-5) ............................................ 39 Contacts......................................................40Find (Menu 2-1) .................................................. 40 Add New Entry (Menu 2-2) ................................... 41 Group Setting (Menu 2-3) ..................................... 41 My Phone # (Menu 2-4) ....................................... 41 Memory (Menu 2-5) ............................................. 41 Planner .......................................................42Today (Menu 3-1) ............................................... 42 Scheduler (Menu 3-2) ........................................... 42 Task List (Menu 3-3) ............................................. 43 Memo Pad (Menu 3-4) .......................................... 43 Alarm (Menu 3-5) ................................................ 43 Calculator (Menu 3-6) .......................................... 43 World Time (Menu 3-7) ........................................ 43 Count Down (Menu 3-8) ....................................... 44 Set Time (Menu 3-9) ........................................... 44 Messages ....................................................45Foto Torpedo (Menu 4-1) ...................................... 45 Torpedo SMS (Menu 4-2) ...................................... 45 Downloads ..................................................48Downloading multimedia files ............................... 48Changing the browser settings ............................. 49Viewing help information ..................................... 49 Table of contents 5 WAP ............................................................50About the WAP browser....................................... 50Launch Web (Menu 6-1) ....................................... 51 Prompt (Menu 6-2) .............................................. 51 Push SL Option (Menu 6-3) ................................... 52 Display ........................................................53Menu Style (Menu 7-1) ........................................ 53 Wallpaper (Menu 7-2) .......................................... 53 Backlight (Menu 7-3) ........................................... 53 Banner (Menu 7-4) .............................................. 54 Launch Pad (Menu 7-5) ........................................ 54 Dual Clock (Menu 7-6) ......................................... 54 Contrast (Menu 7-7) ............................................ 54 Camera .............................…

Text truncated - open the document above for the full version.


  
       















 
  
















 
 








June 28, 2005       !"# $%&' ( &) "*   +,-   . / (0+1+//2(34 (5 /5 ///5 /4(0+1+// 2( 34(5555,4  .(5(65(5 / (5 1 # )57/(5)8 )94144 *4    1    1: ;&/ 1&19<;3<4












  
     
















 
















 




June 28, 2005
! 
 "" 
 "" 
#$%" 
 &
' 
()
*+  !

, !
 "-

)


 .
/01
#  
 23!

.
A3LSCHN485 , $ 
5 
 5!  

1  " .


 ! 
6
2)
5
 ,
)(
/01
#  
 2
3!
  -
 $ 

 5!  
5

' +
7" 

7" 

 % 
8
3 

 !
*%  
 %
" 
5 

-9 
%%  2

:
! " 
 
!  !
  "
 !
$%" 
! %
 !
  !
 5 "

- 

% !
6
/01
#  
 2
3!
 ! 
-  7
% % 

 5!  
 !

  "
! 7
 !
 6 
6  !

 


7 
%- 2

 


! 7


- 
5 "
6
5
  7
% !
6
  
/01

#  
 2
3!
 ! 


 5 "
6  !
-
5
- 5


 "%   
 !


!  
5

 5 "


! " 
6  !
7
 "%  

 5
! 7


"+ 2


   



 
;"
<
" 
=
3-
/01
#  
" 
0













































  
     
















 
















 




June 28, 2005

! 
 "" 
 "" 
 #
 !
$ 
%
$&'" 
 #
( 
)*
+,  !

- !
 ".

*



 /
012
$  
 %
3!%

/
A3LSCHN485 - & 
5 
 67 "
 5!  


7
8 "


   /


 ! 
9
%*)
 !
%*
5
 -
*)
012
$  
 %
3!%
 & 
 6  "
 5!  
5 

 
'
'  
:  
'  
   
'  
 !
 ;
" 
5

 !
 
 ' %

7
! " 
 
!  !
  "
 !
&'" 
! '
 !
  !
 5 "
. 

' !
9
012
$  
 %3!

 ! 

.
' ' 
 5!  
 !

  "
! <
 !
 9 
9  !

 


< 
'. %
 

! <


. 
5 "
9
5
  <
' !
9
 
012
$  
 %
3!
5


 5 "
9  !
.
5
. 5


 "'   
 !


!  
5

 5 "


! " 
9  !
<

 "'  

 5
! <


", %


   


 
="
>
" 
?
3.
012
$  
" 
1%













  
     
















 
















 







  
  
  
!" 
"" 
 
#$
%&  

' 
 (

$


    
  !"""  )   *

  +
 
 ,
-,
  (.
 /


  +
  
 "
0
*
A3LSPHA840), using the Automatic A/B Roaming - Intelligent Retry method, meets the E911
 !  
" / 

 
,
/


' ,
8
"  
9
  + :
9

;<<=



 


 
9
 
 .
" + +


 (
 

  

   +
/

<

 
" 



(
  
(.
 
  +

  ,

  
. 

 .
! 

  
    +

(  
" 
 

   + ,

   .


 
>
5
 
?
-(
@A)
 
 
A,

© 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSCHN485 Dual-band CDMA Phone © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSCHN485 Dual-band CDMA Phone © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSCHN485 Dual-band CDMA Phone © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSCHN485 Dual-band CDMA Phone

Confidential SCH-N485 DualBandTrippleMode 04,21,2005 2.SAMPLELABEL

© 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSCHN485 Dual-band CDMA Phone © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSCHN485 Dual-band CDMA Phone © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSCHN485 Dual-band CDMA Phone © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSCHN485 Dual-band CDMA Phone © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSCHN485 Dual-band CDMA Phone © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSCHN485 Dual-band CDMA Phone © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSCHN485 Dual-band CDMA Phone © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSCHN485 Dual-band CDMA Phone © 2005 SAMSUNG ELECTRONICS Co., Ltd. SAMSUNG FCC ID: A3LSCHN485 Dual-band CDMA Phone

1 of 39 SAMSUNG ELECTRONICS Co., Ltd., Regulatory Compliance Group IT R&D Center 416, Maetan-3dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 443-742 TEST REPORT ON SAR Model Tested: SCH-N485 FCC ID (Requested): A3LSCHN485 Job No: FC-074 Report No: FC-074-S1 Date issued: Jun. 16, 2005 - Abstract – This document reports on SAR Tests carried out in accordance with FCC/OET Bulletin 65, Supplement C(July 2001). Prepared By Date KS AN – Test Engineer Checked By Date SH PARK – Senior Manager Authorized By Date JK CHOI – General Manager 2005.06.16 2005.06.16 2005.06.16 Report Number : FC-074-S1 2 of 39 Contents 1. General Information...........................................................................................................3 2. Description of Device.........................................................................................................3 3. Description of Test Equipment.............................................................................................4 3.1 SAR Measurement Setup...........................................................................................................4 3.2 DASY4 E-Field Probe................................................................................................................5 3.3 SAM Phantom..........................................................................................................................6 3.4 Brain & Muscle Simulating Mixture Characterization.........................................................................7 3.5 Device Holder for transmitters......................................................................................................8 3.6 Validation Dipole.......................................................................................................................8 3.7 Equipment Calibration...............................................................................................................9 4. SAR Measurement Procedure............................................................................................10 5. Description of test position...............................................................................................11 5.1 SAM Phantom Shape...............................................................................................................11 5.2 Cheek/Touch Position...............................................................................................................11 5.3 Ear/Tilt 15° Position.................................................................................................................13 5.4 Body/Leather Configuration.......................................................................................................14 6. Measurement Uncertainty.................................................................................................16 7. System Verification............................................................................................................18 7.1 Tissue Verification..................................................................................................................18 7.2 Test System Validation..........................................................................................................18 8. SAR Measurement Results...............................................................................................19 8.1 Measurement Results(CELLULAR CDMA Right Head SAR-Touch)..................................................20 8.2 Measurement Results(CELLULAR CDMA Right Head SAR-Tilt).......................................................21 8.3 Measurement Results(CELLULAR CDMA Left Head SAR-Touch).................................................22 8.4 Measurement Results(CELLULAR CDMA Left Head SAR-Tilt).......................................................23 8.5 Measurement Results(PCS CDMA Right Head SAR-Touch)........................................................24 8.6 Measurement Results(PCS CDMA Right Head SAR-Tilt)..............................................................25 8.7 Measurement Results(PCS CDMA Left Head SAR-Touch).............................................................26 8.8 Measurement Results(PCS CDMA Left Head SAR-Tilt)....................................................................27 8.9 Measurement Results(CELLULAR CDMA Body SAR with Holster).................................................28 8.10 Measurement Results(PCS CDMA Body SAR with Holster)...........................................................29 9. Conclusion...................................................................................................................30 10. Reference...................................................................................................................31 Report Number : FC-074-S1 3 of 39 1. GENERAL INFORMATION Test Sample : Dual-Band CDMA Phone Model Number : SCH-N485 Serial Number : Identical prototype (S/N : # FC-074-B ) Manufacturer : SAMSUNG ELECTRONICS Co., Ltd. Contact : SM LEE, Engineer Phone : +82-31-279-7008 Fax : +82-31-279-6777 Test Standard : §2.1093; FCC/OET Bulletin 65, Supplement C(July 2001) FCC Classification : Licensed Portable Transmitter Held to Ear (PCE) Test Dates : Jun. 07, 2004 ~ Jun. 08, 2004 Tested for : FCC/TCB Certification 2. DESCRIPTION OF DEVICE Tx Freq. Range : 824.70 – 848.31 MHz (CDMA) 1851.25 – 1908.75 MHz (PCS CDMA) Rx Freq. Range : 869.70 – 893.31 MHz (CDMA) 1931.25 – 1988.75 MHz (PCS CDMA) Max. RF Output Power : 0.303 W ERP CDMA (24.82 dBm) 0.414 W EIRP PCS (26.17 dBm) Antenna Manufacturer : INTOPS Model No.: ICD-0044 Antenna Dimensions : Length = 34.2mm * 18.65mm * 6.56mm Report Number : FC-074-S1 4 of 39 3. DESCRIPTION OF TEST EQUIPMENT 3.1 SAR Measurement Setup Robotic System Measurements are performed using the DASY4 automated dosimetric assessment system. Which is made by Schmid & Partner Engineering AG (SPEAG) in Zurich, Switzerland and consists of high …

Text truncated - open the document above for the full version.

APPENDIX G Plots of The SAR Measurements SAMSUNG FCC ID : A3LSCHN485 835MHz CDMA Head SAR DUT: SCH-N485; Serial: FC-074-B Program Name: SCH-N485 CDMA Right (Job No.: FC-074) Procedure Name: Cheek/Touch, Ch. 0363, Ant. Intenna, Bat.Standard Procedure Notes: Meas.Tissue Temp(celsius)-21.7;Test Date-07/June/2005[OET Bulletin 65- Supplement C, July 2001] Communication System: CDMA; Frequency: 835.89 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835.89 MHz; σ = 0.92 mho/m; ε r = 41.7; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3537; ConvF(9.24, 9.24, 9.24); Calibrated: 2004-12-15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn468; Calibrated: 2004-12-07 - Phantom: SAM 835/900 MHz; Type: SAM; Serial: TP-1247 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Cheek/Touch, Ch. 0363, Ant. Intenna, Bat.Standard/Area Scan (51x71x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 1.39 mW/g Cheek/Touch, Ch. 0363, Ant. Intenna, Bat.Standard/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.0 V/m; Power Drift = -0.141 dB Peak SAR (extrapolated) = 1.73 W/kg SAR(1 g) = 1.28 mW/g Maximum value of SAR (measured) = 1.35 mW/g 0 dB = 1.35mW/g SAMSUNG FCC ID : A3LSCHN485 835MHz CDMA Head SAR DUT: SCH-N485; Serial: FC-074-B Program Name: SCH-N485 CDMA Right (Job No.: FC-074) Procedure Name: Ear/Tilt, Ch. 0363, Ant. Intenna, Bat.Standard Procedure Notes: Meas.Tissue Temp(celsius)-21.7;Test Date-07/June/2005[OET Bulletin 65- Supplement C, July 2001] Communication System: CDMA; Frequency: 835.89 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835.89 MHz; σ = 0.92 mho/m; ε r = 41.7; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3537; ConvF(9.24, 9.24, 9.24); Calibrated: 2004-12-15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn468; Calibrated: 2004-12-07 - Phantom: SAM 835/900 MHz; Type: SAM; Serial: TP-1247 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Ear/Tilt, Ch. 0363, Ant. Intenna, Bat.Standard/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.7 V/m; Power Drift = -0.038 dB Peak SAR (extrapolated) = 0.940 W/kg SAR(1 g) = 0.696 mW/g Maximum value of SAR (measured) = 0.733 mW/g Ear/Tilt, Ch. 0363, Ant. Intenna, Bat.Standard/Area Scan (51x71x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.758 mW/g 0 dB = 0.758mW/g SAMSUNG FCC ID : A3LSCHN485 835MHz CDMA Head SAR DUT: SCH-N485; Serial: FC-074-B Program Name: SCH-N485 CDMA Left (Job No.: FC-074) Procedure Name: Cheek/Touch, Ch. 0363, Ant. Intenna, Bat.Standard Procedure Notes: Meas.Tissue Temp(celsius)-21.7;Test Date-07/June/2005[OET Bulletin 65- Supplement C, July 2001] Communication System: CDMA; Frequency: 835.89 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835.89 MHz; σ = 0.92 mho/m; ε r = 41.7; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 - SN3537; ConvF(9.24, 9.24, 9.24); Calibrated: 2004-12-15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn468; Calibrated: 2004-12-07 - Phantom: SAM 835/900 MHz; Type: SAM; Serial: TP-1247 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Cheek/Touch, Ch. 0363, Ant. Intenna, Bat.Standard/Area Scan (51x71x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 1.51 mW/g Cheek/Touch, Ch. 0363, Ant. Intenna, Bat.Standard/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.2 V/m; Power Drift = -0.054 dB Peak SAR (extrapolated) = 1.78 W/kg SAR(1 g) = 1.32 mW/g Maximum value of SAR (measured) = 1.38 mW/g 0 dB = 1.38mW/g SAMSUNG FCC ID : A3LSCHN485 835MHz CDMA Head SAR DUT: SCH-N485; Serial: FC-074-B Program Name: SCH-N485 CDMA Left (Job No.: FC-074) Procedure Name: Ear/Tilt, Ch. 0363, Ant. Intenna, Bat.Standard Procedure Notes: Meas.Tissue Temp(celsius)-21.7;Test Date-07/June/2005[OET Bulletin 65- Supplement C, July 2001] Communication System: CDMA; Frequency: 835.89 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835.89 MHz; σ = 0.92 mho/m; ε r = 41.7; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 - SN3537; ConvF(9.24, 9.24, 9.24); Calibrated: 2004-12-15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn468; Calibrated: 2004-12-07 - Phantom: SAM 835/900 MHz; Type: SAM; Serial: TP-1247 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Ear/Tilt, Ch. 0363, Ant. Intenna, Bat.Standard/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 20.8 V/m; Power Drift = -0.021 dB Peak SAR (extrapolated) = 0.980 W/kg SAR(1 g) = 0.720 mW/g Maximum value of SAR (measured) = 0.758 mW/g Ear/Tilt, Ch. 0363, Ant. Intenna, Bat.Standard/Area Scan (51x71x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.809 mW/g 0 dB = 0.809mW/g SAMSUNG FCC ID : A3LSCHN485 835MHz CDMA Body SAR DUT: SCH-N485; Serial: FC-074-B Program Name: SCH-N485 CDMA Body (Job No. : FC-074) Procedure Name: Body, Ch. 0363, Ant. Intenna, Bat. Standard Procedure Notes: Meas.Tissue Temp(celsius)-21.7;Test Date-07/June/2005[OET Bulletin 65- Supplement C, July 2001] Communication System: CDMA; Frequency: 835.89 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835.89 MHz; σ = 0.96 mho/m; ε r = 53.4; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3537; ConvF(9.83, 9.83, 9.83); Calibrated: 2004-12-15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn468; Calibrated: 2004-12-07 - Phantom: SAM 835/900 MHz; Type: SAM; Serial: TP-1247 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 Body, Ch. 0363, Ant. Intenna, Bat. Standard/Zoom Scan (5x5x7)/Cube 0: Measurem…

Text truncated - open the document above for the full version.

APPENDIX H Probe Calibration

APPENDIX F The Validation Measurements DUT: Dipole 835 MHz; Serial: 4d014 Program Name: 835MHz Dipole Validation 2005.06.07 Procedure Name: 835MHz @ 250mW Procedure Notes: Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.92 mho/m; ε r = 41.7; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3537; ConvF(9.24, 9.24, 9.24); Calibrated: 2004-12-15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn468; Calibrated: 2004-12-07 - Phantom: SAM 835/900 MHz; Type: SAM; Serial: TP-1247 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 835MHz @ 250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 48.4 V/m; Power Drift = -0.037 dB Peak SAR (extrapolated) = 3.74 W/kg SAR(1 g) = 2.48 mW/g Maximum value of SAR (measured) = 2.69 mW/g 835MHz @ 250mW/Area Scan (51x51x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 2.71 mW/g 0 dB = 2.71mW/g DUT: Dipole 1900 MHz; Serial: 5d023 Program Name: 1900 Dipole Validation 2005.06.08 Procedure Name: 1900MHz @250mW Procedure Notes: Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.42 mho/m; ε r = 39.1; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3537; ConvF(8.29, 8.29, 8.29); Calibrated: 2004-12-15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn468; Calibrated: 2004-12-07 - Phantom: SAM 1800/1900 MHz; Type: SAM; Serial: TP-1248 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 1900MHz @250mW/Area Scan (51x51x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 16.0 mW/g 1900MHz @250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 90.4 V/m; Power Drift = -0.034 dB Peak SAR (extrapolated) = 19.1 W/kg SAR(1 g) = 10.2 mW/g Maximum value of SAR (measured) = 11.4 mW/g 0 dB = 11.4mW/g

SAMSUNG ELECTRONICS Co., Ltd., Regulatory Compliance Group IT R&D Center 416 Maetan3-Dong, Yeongtong-gu, Suwon city, Gyeonggi-Do, Korea 442-742 FCC CFR47 PART 22 & 24 SUBPART CERTIFICATION REPORT Model Tested: SCH-N485 FCC ID (Requested): A3LSCHN485 Report No: FC-074-R1 Job No: FC-074 Date issued: June 14, 2005 - Abstract – All measurement reported herein accordance with FCC Rules, 47CFR Part2, Part22, Part24. Prepared By Date YE PARK – Test Engineer Checked By Date SH PARK - Senior Manager Authorized By Date JK CHOI – General Manager © Copyright SAMSUNG Electronics 2005 Report Number : FC-074-R1 TABLE OF CONTENT MEASUREMENT REPORT Page 1. FCC Certification Information 3 1.1 2.1033 General Information 3 2. INTRODUCTION 4 2.1 General 4 3. MEASURING INSTRUMENT CALIBRATION 5 4. TEST EQUIPMENT LIST 6 5. DESCRIPTION OF TESTS 7 5.1 Effective Radiated Power/Equivalent Isotropic Radiated Power 7 5.2 Radiated Spurious & Harmonic Emission 8 5.3 Occupied Bandwidth 10 5.4 Spurious and Harmonic Emissions at Antenna Terminal 10 5.4.1 Occupied Bandwidth Emission Limits 10 5.4.2 Conducted Spurious Emission 11 5.5 Frequency Stability / Temperature Variation 12 6. TEST DATA 13 6.1 Effective Radiated Power(E.R.P.) 13 6.2 Equivalent Isotropic Radiated Power(E.I.R.P.) 14 6.3 Cellular CDMA Radiated Spurious & Harmonic Measurement 15 6.4 PCS CDMA Radiated Spurious & Harmonic Measurement 16 6.5 CDMA Radiated Spurious & Harmonic Conversion Table 17 6.6 PCS Radiated Spurious & Harmonic Conversion Table 18 6.7 Frequency Stability 19 6.7.1 CDMA Frequency Stability Table 19 6.7.2 PCS Frequency Stability Table 20 6.7.3 CDMA Frequency Stability Graph 21 6.7.4 PCS Frequency Stability Graph 23 7.SAMPLE CALCULATION 25 7.1 Emission Designator 8. CONCLUSION 26 9. TEST PLOTS 27 Report Number : FC-074-R1 MEASUREMENT REPORT 1. FCC Certification Information The following information is in accordance with FCC Rules, 47CFR Part2, Subpart J, Sections 2.1033 – 2.1055. 1.1 §2.1033 General Information Applicant Name: SAMSUNG ELECRONICS CO., LTD. Address: 416 Maetan3-Dong, Yeongtong-gu, Suwon City Gyeonggi-Do, Korea 442-742 Attention: FCC ID: SungJoo KIM, Engineering Manager (QA Lab) A3LSCHN485 Quantity: Quantity production is planned Emission Designators: 1M25F9W Tx Freq. Range: 824.70-848.31MHz (CDMA) 1851.25-1908.75MHz (PCS CDMA) Rx Freq. Range: 869.70-893.31 MHz (CDMA) 1931.25-1988.75 MHz (PCS CDMA) Max. Power Rating: 0.303 W ERP CDMA( 24.82 dBm) 0.414W EIRP PCS CDMA ( 26.17 dBm) FCC Classification(s): Licensed Portable Tx Held to Ear (PCE) Equipment (EUT) Type: Dual-Band CDMA Phone Modulation(s): CDMA/CDMA PCS Frequency Tolerance: 0.00025% (2.5ppm) FCC Rule Part(s): 24(E), 22(H), 2. Dates of Test: June 3, 09-13, 2005 Place of Test: SAMSUNG Lab, Test Report S/N: FC-074-R1 Report Number : FC-074-R1 2. INTRODUCTION 2.1 General These measurement test were conducted at SAMSUNG ELECTRONICS CO., LTD(SUWON). The site address is 416 Maetan3-Dong, Yeongtong-gu, Suwon City, Gyeonggi-Do, Korea 442-742 The site have 1 Fully-anechoic chamber and measurement facility. Measurement Procedure The radiated and spurious measurements were made Fully-anechoic chamber at a 3-meter test range (see Figure2). The equipment under testing was placed on a wooden turntable 3-meters from the receive antenna. The receive antenna height and turntable rotations were adjusted for the highest reading on the receive spectrum analyzer. The substitution antenna will replace the EUT antenna it the same position and in vertical polarization. The frequency of the signal generator shall be set to the frequencies that were measured on the EUT. The test antenna shall be raised and lowered, if necessary, to ensure that the maximum signal is still being received. The signal generator, output level, shall be adjusted until an equal or a known related level to what was measured from the EUT is obtained in the spectrum analyzer. This level was recorded. For readings above 1 GHz, the above procedure is repeated using horn antennas and the difference between the gain of the horn and an isotropic antenna are taken into consideration. Figure1. Map of the Suwon City area. Fi gure2. Photograph of 3m Fully-Anechoic C…

Text truncated - open the document above for the full version.