A3LSLVD370PDVD Player / Video Cassette Recorder

2-671-544-11 (1) US/ES DVD Player/ Video Cassette Recorder Operating Instructions Operating Instructions For customers in the USA If you have any questions about your Sony DVD-VCR, you may call Sony Customer Information Center at 1-800-VHS-SONY (847-7669). For all other Sony product questions, please call Sony Customer Information Center at 1-800-222-SONY (7669). Or write to: Sony Customer Information Center 12451 Gateway Boulevard Ft. Myers, FL 33913 For Customers in Canada If this product is not working properly, please call 1-877-602-2008 for Peace of Mind Warranty Replacement service. For other product related questions please contact our Customer Information Service Center at 1-877-899-7669 or write to us at: Customer Information Service 115 Gordon Baker Road, Toronto, Ontario, M2H 3R6 SLV-D370P © 2006 Sony Corporation US ES 2 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. CAUTION The use of optical instruments with this product will increase eye hazard. As the laser beam used in this DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. For customers in the U.S.A Owner’s Record The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. ______________ Serial No.______________ CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Notes about discs • To keep the disc clean, handle the disc by its edge. Do not touch the surface. • Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car. • After playing, store the disc in its case. • Clean the disc with a cleaning cloth. Wipe the disc from the center out. • Do not use solvents such as benzine, thinner, commercially available disc/lens cleaners, or anti- static spray intended for vinyl LPs. • If you have printed the disc’s label, dry the label before playing. 3 Precautions Precautions On safety • To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. • Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further. On power sources • Operate the unit only on 120 V AC, 60 Hz. • This unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. • Unplug the unit from the wall outlet if you do not intend to use it for an extended period of time. To disconnect the cord, pull it out by the plug, never by the cord. On placement • Do not install the unit in a confined space such as a bookshelf or similar unit. • Do not install the unit in an inclined position. It is designed to be operated in a horizontal position only. • Keep the player, discs and cassettes away from equipment with strong magnets, such as microwave ovens or large loudspeakers. • Do not place heavy objects on the unit. On operation • When you move the player, take out any discs. If you don’t, the disc may be damaged. • If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player and cause damage to the video head, tape, and the optical block. Should this occur, the player may not operate properly. When you first install the player, or when you move it from a cold to a warm location, remove the disc and tape and leave the player turned on for about three hours before operating the player. On adjusting volume Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is played. On cleaning Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent, such as alcohol or benzine. On cleaning discs Do not use a commercially available cleaning disc. It may cause a malfunction. On cleaning the video heads When the video heads are dirty, clean th…

Text truncated - open the document above for the full version.

Photograph of SLV-D370P FCC ID : A3LSLVD370P FRONT VIEW REAR VIEW Photograph of SLV-D370P FCC ID : A3LSLVD370P TOP/LEFT VIEW BOTTOM/RIGHT VIEW

Labeling requirement FCC IDENTIFICATION LOCATION: ON THE LABEL RATING FCC ID: A3LSLVD370P THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES AND THE CANADIAN ICES-003. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION

Photograph of SLV-D370P - FCC ID : A3LSLVD370P TOP VIEW (FRONT/TOP COVER OPENED) TOP VIEW – DVD/VCR DECK REMOVED Photograph of SLV-D370P - FCC ID : A3LSLVD370P TOP of MAIN PCB VIEW BOTTOM OF MAIN PCB VIEW Photograph of SLV-D370P - FCC ID : A3LSLVD370P TOP OF DVD PCB VIEW BOTTOM OF DVD PCB VIEW Photograph of SLV-D370P - FCC ID : A3LSLVD370P METAL SHIELD VIEW METAL SHIEL VIEW Photograph of TM-BLOCK TM-BLOCK TYPE: VHA35ASE TOP VIEW BOTTOM VIEW

“” “” ““ ’

Page : 1 of 58 Project NO. :LBE052722 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. EMC Test Report According to FCC Part 15 Subpart B Project No. LBE052722 Equipment under Test Applicant Samsung Electronics Co., Ltd Address 416 Maetan3-Dong,Yeongtong-Gu,Suwon-Si,Gyeonggi-Do, Korea,443-742 Product Name DVD PLAYER / VIDEO CASSETTE RECORDER Model Name SLV-D370P Manufacturer Samsung Electronics Co., Ltd Brand Name SONY Broadcasting System NTSC Variant Model See Page 3 FCC ID A3LSLVD370P Date of Test November 22 ~ 25 , 2005 Issued Date December 5, 2005 Name/Position Signature Tested by Young Jin, Kim Test Engineer Reviewed by No Cheon, Park Manager of EMC Lab. Authorized by Seung Kyu, Cha Chief of EMC Lab. 1. This test reports does not constitute an endorsement by NIST/NVLAP or U.S Government. 2. This test report is to certify that the tested device properly complies with the requirements of FCC Rules and Regulations Part 15 Subpart B Unintentional Radiators. All tests necessary to show compliance to the requirements were and these results met the specifications requirement. This laboratory is registered by the NIST/NVLAP, U.S.A. The test reported herein have been performed in accordance with its terms of registration. 3. FCC filing Registration Number : 873282 Page : 2 of 58 Project NO. :LBE052722 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. Table of Contents 1. General Information 1.1 Basic Information related Product 1.2 Detail Information related Product 1.3 Operating Mode and Condition 1.4 Equipment Modifications 1.5 Test Configuration 1.6 Applied Standard 1.7 Test Facility 2. Summary of Test Results 3. Description of individual tests 3. 1 Conducted Emission 3. 2 Radiated Emission 3. 3 Output Signal Level 3. 4 Output Terminal Conducted Spurious Emission 3. 5 Ant. Transfer Switch 4. Appendix A 4.1 Test Photography 4.2 EUT Photography Page : 3 of 58 Project NO. :LBE052722 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. 1. General Information 1.1 Basic Information related Product Applicant Samsung Electronics Co., Ltd Model name SLV-D370P Applicant Address 416 Maetan3- Dong, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, Korea, 443-742 Contact Person Woo Sung, CHO Kind of product Valiant list SLV-D271P Page : 4 of 58 Project NO. :LBE052722 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. 1.2 Detail Information related Product Specification Page : 5 of 58 Project NO. :LBE052722 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. 1.3 Operating Mode and Condition The EUT was tested in the following operating modes(at both channel 3 and 4) for the tests mention in this report : 1) DVD Play : In this test mode, a DVD recorded with NTSC signal was played on the EUT. 2) VCR Recording ( NTSC Signal ) : A NTSC signal(Color bar) was supplied at ch.69(801.25MHz) through the ant. Input connector 3) VCR Recording ( 1V VITS Signal ) : A 1V peak-to-peak VITS signal was supplied through the video input connector for recording. 4) VCR Recording ( 5V VITS Signal ) : A 5V peak-to-peak VITS signal was supplied through the video input connector for recording. 5) VCR Play : In this test mode, a video tape recorded with NTSC signal was played on the EUT. * Note: The NTSC TV signal input record mode is not applicable to the antenna transfer switch test. 1.4 Equipment Modifications No equipment modifications were required. Page : 6 of 58 Project NO. :LBE052722 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. 1.5 Test Configuration Used EUT and Peripherals Seq Device Model Name Serial # Maker Note A DVD PLAYER / VIDEO CASSETTE RECORDER SLV-D370P - SAMSUNG EUT B Remote Controller - - SAMSUNG EUT Used Cable Description Connect Cable Length [m] Shielded [Y/N]Remark Page : 7 of 58 Project NO. :LBE052722 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. Block Diagram 1.6 Applied Standards List Applied Standards Test Procedure FCC Part15 Subpart B ANSI C63.4 : 2003 Page : 8 of 58 Project NO. :LBE052722 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. 1.7 Test Facility General Information The sites are constructed in conformance with the requirements of ANSI C63.4 and CISPR 16-1, 16-2. This EMC Testing Lab. is accredited by Korea Laboratory Accreditation Scheme(KOLAS) which signed the International Laboratory Accreditation Cooperation (ILAC) Mutual Recognition Arrangement (MRA) for the above test item(s) and test method(s). This Lab. is operated as testing laboratory in accordance with the requirements of ISO/IEC 17025:1998. Accreditation and Listing Uncertainty Test Item Expanded Uncertainty Radiated Emission (Hor) ± 4.00dB (Ver) ± 4.40dB Conducted Emission ± 3.30dB (According to NAMAS Pub.NIS81) Page : 9 of 58 Project NO. :LBE052722 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. 2. Summary of Test Results Result : PASS The equipment under test(EUT) has been found to comply with the applied standards. Test Name Applied Standard Result Electromagnetic Emission Test 3.1 Conducted Emission FCC Part15 Subpart B Complied 3.2 Radiated Emission FCC Part15 Subpart B Complied 3.3 Output Signal Level FCC Part15 Subpart B Complied 3.4 Output Terminal Conducted Spurious Emission FCC Part15 Subpart B Complied 3.5 Ant. Transfer Switch FCC Part15 Subpart B Complied Page : 10 of 58 Project NO. :LBE052722 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. 3. Description of Individual Tests 3.1 Conducted Emission Test Informat…

Text truncated - open the document above for the full version.

Page : 55 of 58 Project NO. :LBE052722 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. 4. Appendix A 4.1 Test Photography Picture 1. Conducted Emission (Rear) Picture 2. Radiated Emission (Front) Page : 56 of 58 Project NO. :LBE052722 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. Picture 3. Radiated Emission (Rear) Picture 4. Output Signal Level Page : 57 of 58 Project NO. :LBE052722 This report shall not be reproduced except in full, without the written approval of SEC EMC Testing laboratory. Picture 5. Output Terminal Conducted Spurious Emission Picture 6. Ant. Transfer Switch