A3LSMR381Wrist-worn Device with Bluetooth

Printed in Korea GH68-41038B Rev. 1.0 English (CA). 02/2014 Some content may differ from your device depending on the region, service provider, or software version, and is subject to change without prior notice. SM-R380_QSG_CA_Eng.indb 224/02/2014 2:41:16 PM SM-R380 You can access the full user manual for more information. To learn to access the user manual, see “Viewing the user manual” in this quick start guide. Quick Start Guide www.samsung.com SM-R380_QSG_CA_Eng.indb 324/02/2014 2:41:17 PM 2 You can use this device as a companion device to some Samsung Android™ smartphones or tablet PCs.. • Content may differ from the final product, or from software provided by service providers or carriers, and is subject to change without prior notice. • The items supplied with the device and any available accessories may vary depending on the region or service provider. • The supplied items are designed only for this device and may not be compatible with other devices. • You can purchase additional accessories from your local Samsung retailer. Make sure they are compatible with the device before purchase. SM-R380_QSG_CA_Eng.indb 224/02/2014 2:41:17 PM 3 • Other accessories may not be compatible with your device. • Samsung is not liable for performance issues or incompatibilities caused by edited registry settings or modified operating system software. Attempting to customize the operating system may cause the device or applications to work improperly. Notices for using Bluetooth • To avoid problems when connecting your device to another mobile device, place the devices close to each other. • Ensure that your device and a connected mobile device are within the maximum Bluetooth range (10 m). SM-R380_QSG_CA_Eng.indb 324/02/2014 2:41:17 PM 4 • Ensure that there are no obstacles between your device and a connected mobile device, including human bodies, walls, corners, or fences. If there are obstacles between the devices, the operating distance may be reduced. • Do not touch the Bluetooth antenna of a connected mobile device. • Bluetooth uses the same frequency as some industrial, scientific, medical, and low power products and interference may occur when making connections near these types of products. • Some devices, especially those that are not tested or approved by the Bluetooth SIG, may be incompatible with your device. SM-R380_QSG_CA_Eng.indb 424/02/2014 2:41:17 PM 5 Copyright Copyright © 2014 Samsung Electronics This guide is protected under international copyright laws. No part of this guide may be reproduced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in any information storage and retrieval system, without the prior written permission of Samsung Electronics. SM-R380_QSG_CA_Eng.indb 524/02/2014 2:41:17 PM 6 Trademarks • SAMSUNG and the SAMSUNG logo are registered trademarks of Samsung Electronics. • Bluetooth ® is a registered trademark of Bluetooth SIG, Inc. worldwide. • All other trademarks and copyrights are the property of their respective owners. IC Notice This device complies with Industry Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. SM-R380_QSG_CA_Eng.indb 624/02/2014 2:41:17 PM 7 Getting started Device layout Microphone Touch screen Power button Camera Charging terminals Strap Microphone Speaker Buckle Humidity and liquids may damage your device. Keep your device dry. TBD SM-R380_QSG_CA_Eng.indb 724/02/2014 2:41:17 PM 8 Getting started While charging, you cannot use calling features, voice recorder, and camera. Charging the battery Before using the device for the first time or when the battery has been unused for extended periods, you must charge the battery. Use only Samsung-approved chargers, batteries, and cables. Unapproved chargers or cables can cause the battery to explode or damage the device. SM-R380_QSG_CA_Eng.indb 824/02/2014 2:41:17 PM 9 Getting started 1 Slide and hold the switch, and then open the cover of the charging dock. 1 2 Charging terminals 2 Place the device on the charging dock with the charging terminals facing each other. TBD TBD SM-R380_QSG_CA_Eng.indb 924/02/2014 2:41:17 PM 10 Getting started 3 Close the cover of the charging dock. 4 Plug the small end of the charger into the multipurpose jack of the charging dock, and plug the large end of the charger into an electric socket. TBD TBD SM-R380_QSG_CA_Eng.indb 1024/02/2014 2:41:17 PM 11 Getting started Connecting the charger improperly may cause serious damage to the device. Any damage caused by misuse is not covered by the warranty. After fully charging, disconnect the device from the charging dock. First remove the device from the charging dock, unplug the charger from the charging dock, and then unplug the charger from the electric socket. SM-R380_QSG_CA_Eng.indb 1124/02/2014 2:41:17 PM 12 Getting started To save energy, unplug the charger when not in use. The charger does not have a power switch, so you must unplug the charger from the electric socket when not in use to avoid wasting power. The charger should remain close to the electric socket and easily accessible while charging. Checking the battery charge status When you charge the battery while the device is off, the following icons will show the current battery charge status: ChargingFully charged SM-R380_QSG_CA_Eng.indb 1224/02/2014 2:41:17 PM 13 Getting started Wearing the device 1 Release the buckle. Be careful not to damage your fingernails when you release the buckle. TBD SM-R380_QSG_CA_Eng.indb 1324/02/2014 2:41:17 PM 14 Getting started 2 Open the clasp and fit the strap to your wrist with the pin. 3 Press the buckle until it clicks. TBD TBD SM-R380_QSG_CA_Eng.indb 1424/02/2014 2:41:17 PM 15 Getting started Turning the device on and off …

Text truncated - open the document above for the full version.

Samsung Electronics America, Inc 19 Chapin Rd, Building D. Pine Brook, NJ 07058 Date: February 25, 2014 FCC ID: A3LSMR381 To whom it may concern: We, the undersigned, hereby authorize PCTEST Engineering Laboratory Inc., to act on our behalf in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by PCTEST Engineering Laboratory, Inc. on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to any application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S. C. 862. Sincerely, Signature Sang Kyung (Peter), Ra General Manager Samsung Electronics America, Inc

SAMSUNG ELECTRONICS AMERICA, INC. American QA Lab 19 Chapin Rd, Building D. Pine Brook, NJ 07058 Date: February 25, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: A3LSMR381 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, SAMSUNG ELECTRONICS CO.,LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give SAMSUNG ELECTRONICS CO.,LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Operational Description 3 Schematics SHORT-TERM 4 External Photos 5 Internal Photos 6 Test-Setup Photos 7 Users Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Peter Ra General Manager American QA Lab SAMSUNG Electronics America INC.

SAMSUNG ELECTRONICS CO., LTD 129, Samsung-ro,Yeongtong-gu Suwon-si,Gyeonggi-do, 443-742 Korea February 18, 2014 Federal Communications Commiss ion 7435 Oakland Mills Road Colu mbia, MD 21046 SUBJECT : Label Statement FCC ID : A3LSMR381 Gentlemen: We hereby provide the label statement letter for the above-mentioned device by a new label statement policy of KDB 784748 D01.. The label statement is as follows: The FCC ID label is located on the rear of the device with the battery installed. At this time the FCC ID is readily visible to the user. The label is permanently engraved by laser and not easily removed from the device. This statement could not be included in the label. So we inform you of it through this letter. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely Yours, Seoung Ho Park Senior Manager SAMSUNG ELECTRONICS CO.,LTD Telecommunication Network Business Mobile Communication Division Regulatory Compliance Group.

Model: SM-R381 Label and Location FCC ID: A3L SMR381 Label: Top Location: Back of device Bottom FCC ID is engraved rear of the device Label

FCC ID: A3LSMR381 SAR EVALUATION REPORT Reviewed by: Quality Manager Document S/N: Test Dates: DUT Type: Page 1 of 18 0Y1402100360.A3L 02/12/14 - 02/14/14 BT wrist device © 2014 PCTEST Engineering Laboratory, Inc. REV 13.0 M 12/04/2013 Applicant Name: Date of Testing: Samsung Electronics, Co. Ltd. 02/12/14 - 02/14/14 129, Samsung-ro, Maetan dong, Test Site/Location: Yeongtong-gu, Suwon-si PCTEST Lab, Columbia, MD, USA Gyeonggi-do 443-742, Korea Document Serial No.: 0Y1402100360.A3L FCC ID: A3LSMR381 APPLICANT: SAMSUNG ELECTRONICS, CO. LTD. DUT Type: BT wrist device Application Type: Certification FCC Rule Part(s): CFR §2.1093 Model(s): SM-R381 Test Device Serial No.: Pre-Production [S/N: 20BCB] Note: Powers in the above table represent output powers for the SAR test configurations and may not represent the highest output powers for all configurations for each mode. This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement procedures specified in Section 1.7 of this report; for North American frequency bands only. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Test results reported herein relate only to the item(s) tested. 1 gm Head (W /kg) 10 gm Extremity (W /kg) DSS/DTSBluetooth2402 - 2480 MHz< 0.1 0.18 Band & ModeTx Frequency Equipment Class SAR PCTEST ENGINEERING LABORATORY, INC. 7185 Oakland Mills Road, Columbia, MD 21046 USA Tel. +1.410.290.6652 / Fax +1.410.290.6654 http://www.pctestlab.com SAR EVALUATION REPORT FCC ID: A3LSMR381 SAR EVALUATION REPORT Reviewed by: Quality Manager Document S/N: Test Dates: DUT Type: Page 2 of 18 0Y1402100360.A3L 02/12/14 - 02/14/14 BT wrist device © 2014 PCTEST Engineering Laboratory, Inc. REV 13.0 M 12/04/2013 TABLE OF CONTENTS 1 DEVICE UNDER TEST ....................................................................................................................3 2 INTRODUCTION ..............................................................................................................................5 3 DOSIMETRIC ASSESSMENT .........................................................................................................6 4 TEST CONFIGURATION POSITIONS FOR WRIST-WORN DEVICES ..........................................7 5 RF EXPOSURE LIMITS ...................................................................................................................8 6 FCC MEASUREMENT PROCEDURES ...........................................................................................9 7 RF CONDUCTED POWERS ......................................................................................................... 10 8 SYSTEM VERIFICATION .............................................................................................................. 11 9 SAR DATA SUMMARY ................................................................................................................. 12 10 SAR MEASUREMENT VARIABILITY ........................................................................................... 13 11 EQUIPMENT LIST ......................................................................................................................... 14 12 MEASUREMENT UNCERTAINTIES ............................................................................................ 15 13 CONCLUSION ............................................................................................................................... 16 14 REFERENCES .............................................................................................................................. 17 APPENDIX A: SAR TEST PLOTS APPENDIX B: SAR DIPOLE VERIFICATION PLOTS APPENDIX C: PROBE AND DIPOLE CALIBRATION CERTIFICATES APPENDIX D: SAR TISSUE SPECIFICATIONS APPENDIX E: SAR SYSTEM VALIDATION APPENDIX F: SAR TEST SETUP PHOTOGRAPHS FCC ID: A3LSMR381 SAR EVALUATION REPORT Reviewed by: Quality Manager Document S/N: Test Dates: DUT Type: Page 3 of 18 0Y1402100360.A3L 02/12/14 - 02/14/14 BT wrist device © 2014 PCTEST Engineering Laboratory, Inc. REV 13.0 M 12/04/2013 1 DEVICE UNDER TEST 1.1 Device Overview 1.2 Nominal and Maximum Output Power Specifications This device operates using the following maximum and nominal output power specifications. SAR values were scaled to the maximum allowed power to determine compliance per KDB Publication 447498 D01v05. 1.3 DUT Antenna Locations Note: Exact antenna dimensions and separation distances are shown in the Technical Descriptions in the FCC Filing. Figure 1-1 DUT Antenna Locations BluetoothData2402 - 2480 MHz Band & ModeTx FrequencyOperating Modes Maximum Nominal Maximum Nominal Mode / Band Bluetooth LE 8.0 7.5 Modulated Average (dBm) Bluetooth 17.5 17.0 FCC ID: A3LSMR381 SAR EVALUATION REPORT Reviewed by: Quality Manager Document S/N: Test Dates: DUT Type: Page 4 of 18 0Y1402100360.A3L 02/12/14 - 02/14/14 BT wrist device © 2014 PCTEST Engineering Laboratory, Inc. REV 13.0 M 12/04/2013 1.4 Simultaneous Transmission Capabilities This DUT cannot transmit in any simultaneous transmission scenarios. 1.5 SAR Test Exclusions Applied (A) BT Per FCC KDB 447498 D01v05, the 1g SAR exclusion threshold for distances <50mm is defined by the following equation: Based on the maximum conducted power of Bluetooth LE (rounded to the nearest mW) and the antenna to user separation distance, Bluetooth LE SAR was not required for held to face configurations; [(6/10)* √2.440] = 0.9 < 3.0. Per KDB Publication 447498 D01v05, the maximum power of the channel was rounded to the nearest mW before calculation. Per FCC KDB 4…

Text truncated - open the document above for the full version.

Reviewed by: FCC ID: A3LSMR381 FCC Pt. 15.247 / IC RSS-210 BLUETOOTH TEST REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0Y1402100362.A3L 2/10 - 2/19/2014 BT Wrist Watch Page 1 of 45 © 2014 PCTEST Engineering Laboratory, Inc. V 3.3 06/10/2013 Applicant Name: Date of Testing: Samsung Electronics, Co. Ltd. 2/10 - 2/19/2014 129, Samsung-ro, Maetan dong, Test Site/Location: Yeongtong-gu, Suwon-si PCTEST Lab. Columbia, MD, USA Gyeonggi-do 443-742, Korea Test Report Serial No.: 0Y1402100362.A3L FCC ID: A3LSMR381 IC CERTIFICATION NO.: 649E-SMR381 APPLICANT: Samsung Electronics, Co. Ltd. Application Type: Certification Model(s): SM-R381 EUT Type: BT Wrist Watch Max. RF Output Power: 62.445 mW (17.96dBm) Conducted Frequency Range: 2402 – 2480MHz (Bluetooth for US) Type of Modulation: GFSK, /4-DQPSK, 8DPSK FCC Classification: FCC Part 15 Spread Spectrum Transmitter (DSS) FCC Rule Part(s): Part 15 Subpart C (15.247) IC Specification(s): RSS-210 Issue 8 Test Procedure(s): DA 00-705 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in DA 00-705. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST ENGINEERING LABORATORY, INC. 6660-B Dobbin Road, Columbia, MD 21045 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com MEASUREMENT REPORT FCC PART 15.247 / IC RSS-210 Bluetooth Reviewed by: FCC ID: A3LSMR381 FCC Pt. 15.247 / IC RSS-210 BLUETOOTH TEST REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0Y1402100362.A3L 2/10 - 2/19/2014 BT Wrist Watch Page 2 of 45 © 2014 PCTEST Engineering Laboratory, Inc. V 3.3 06/10/2013 TABLE OF CONTENTS FCC PART 15.247 MEASUREMENT REPORT .................................................................................................. 3 1.0 INTRODUCTION......................................................................................................................................4 1.1 SCOPE....................................................................................................................................................... 4 1.2 PCTEST TEST LOCATION........................................................................................................................ 4 2.0 PRODUCT INFORMATION .....................................................................................................................5 2.1 EQUIPMENT DESCRIPTION..................................................................................................................... 5 2.2 DEVICE CAPABILITIES ............................................................................................................................. 5 2.3 TEST CONFIGURATION ........................................................................................................................... 5 2.4 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS.................................................................................. 5 2.5 LABELING REQUIREMENTS .................................................................................................................... 5 3.0 DESCRIPTION OF TEST ........................................................................................................................6 3.1 EVALUATION PROCEDURE..................................................................................................................... 6 3.2 AC LINE CONDUCTED EMISSIONS......................................................................................................... 6 3.3 RADIATED EMISSIONS ............................................................................................................................ 7 4.0 ANTENNA REQUIREMENTS ..................................................................................................................8 5.0 TEST EQUIPMENT CALIBRATION DATA..............................................................................................9 6.0 TEST RESULTS ....................................................................................................................................10 6.1 SUMMARY ............................................................................................................................................... 10 6.2 20DB BANDWIDTH MEASUREMENT .....................................................................................................11 6.3 OUTPUT POWER MEASUREMENT .......................................................................................................17 6.4 BAND EDGE COMPLIANCE.................................................................................................................... 27 6.5 CARRIER FREQUENCY SEPARATION.................................................................................................. 30 6.6 TIME OF OCCUPANCY ........................................................................................................................... 31 6.7 NUMBER OF HOPPING CHANNELS......................................................................................................32 6.8 CONDUCTED SPURIOUS EMISSIONS .................................................................................................. 34 6.9 RADIATED SPURIOUS EMISSION MEASUREMENTS.......................................................................... 38 6.10 RADIATED RESTRICTED BAND EDGE MEASUREMENTS .................................................................. 42 6.11 LINE-CONDUCTED TEST DATA......................................…

Text truncated - open the document above for the full version.

Samsung FCC ID: A3LSMR381 Model: SM-R381 Test Set-Up Photos EUT Type: BT Wrist Watch Page 1 of 3 © 2014 PCTEST Engineering Laboratory Inc. TEST SETUP PHOTOGRAPHS Samsung FCC ID: A3LSMR381 Model: SM-R381 Test Set-Up Photos EUT Type: BT Wrist Watch Page 2 of 3 © 2014 PCTEST Engineering Laboratory Inc. Samsung FCC ID: A3LSMR381 Model: SM-R381 Test Set-Up Photos EUT Type: BT Wrist Watch Page 3 of 3 © 2014 PCTEST Engineering Laboratory Inc.

FCC ID: A3LSMR381 SAR EVALUATION REPORT Reviewed by: Quality Manager Test Dates: DUT Type: APPENDIX F: Page 1 of 3 02/12/14 - 02/14/14 BT wrist device © 2014 PCTEST Engineering Laboratory, Inc. REV 13.0 M 12/04/2013 APPENDIX F: S AR TEST SETUP PHOTOGRAPHS FCC ID: A3LSMR381 SAR EVALUATION REPORT Reviewed by: Quality Manager Test Dates: DUT Type: APPENDIX F: Page 2 of 3 02/12/14 - 02/14/14 BT wrist device © 2014 PCTEST Engineering Laboratory, Inc. REV 13.0 M 12/04/2013 SAR Test Setup Photo 1: Front side at 1.0 cm SAR Test Setup Photo 2: Back Side at 0.0 cm FCC ID: A3LSMR381 SAR EVALUATION REPORT Reviewed by: Quality Manager Test Dates: DUT Type: APPENDIX F: Page 3 of 3 02/12/14 - 02/14/14 BT wrist device © 2014 PCTEST Engineering Laboratory, Inc. REV 13.0 M 12/04/2013 SAR Test Setup Photo 3: Front Side at 0.0 cm