A3LSMT365GSM/WCDMA/LTE Phablet + Bluetooth, WLAN DTS/UNII a/b/g/n, ANT+ and NFC

Accessing more information On your device, open the web browser and select the bookmark for the user manual from the bookmarks list. Visit www.samsung.com t o view device information, the user manual, and more. The user manual may not be available depending on the web browser or service provider. SM-T365 Quick Start Guide Draft version 2014-08-20 Device layout To turn on the device, press and hold the Power button for a few seconds. Home button Back button Power button Volume button Recent apps button Multipurpose jack Ensure that the back cover is closed tightly to prevent water and dust entering the device. Open or loose back cover may allow water and dust to enter the device and cause damage. Installing the battery 1 2 Press Align 2 1 • Ensure that the back cover is closed tightly. • Use only Samsung-approved back covers and accessories with the device. Charging the battery Before using the device for the rst time, you must charge the battery. The charger should remain close to the electric socket and easily accessible while charging. Some content may dier from your device depending on the region, service provider, or software version, and is subject to change without prior notice. Correct disposal T o view more information about device and battery disposal, tap → Settings → General → About device → Legal information → Safet y information. This marking on the product, accessories or lit erature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste. This product is RoHS compliant. This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste. Safety information To prevent injury, re, or explosion, read and adhere to all safety information before using the device. To view the full safety information, tap → Settings → General → About device → Legal information → Safety information. Warning • Use manufacturer-approved batteries, chargers, accessories, and supplies. • Do not expose the device to physical impact or damage. • Prevent the multipurpose jack and battery terminals from contacting conductive elements, such as metal or liquids. • Do not store your device in very hot or very cold areas. It is recommended to use your device at temperatures from 5 °C to 35 °C. • Do not store your device near or in heaters, microwaves, cooking equipment, or high pressure containers. • Do not touch the charger or the device with wet hands while the device is charging. • Do not use your device outdoor during a thunderstorm. • Turn o t he device in potentially explosive environments. • Comply with all safety warnings and regulations regarding mobile device usage while operating a vehicle. • If the device is cracked, broken, or becomes very hot, stop using the device immediately and take it to a Samsung Service Centre. • Do not allow children or animals to chew or suck the device. • Do not poke eyes, ears, or other body parts with the device or insert the device into the mouth. • If the device has a camera ash or light, do not use it close to the eyes of people or animals. To prevent possible hearing damage when using a headset, do not listen to sound at high volume for long periods. Your device uses a non-harmonised frequency and is intended for use in all European countries. The WLAN can be operated in the EU without restriction indoors, but cannot be operated outdoors. Maintaining water and dust resistance The device may be damaged if water or dust enters the device. Follow these tips carefully to prevent damage to the device and to maintain the water- and dust-resistant performance of the device. • Do not immerse the device in water deeper than 1 m and keep it submerged for more than 30 minutes. • Do not expose the device to water moving with force, such as ocean waves or waterfalls. • Do not open the device's covers when the device is in water or in very humid places, such as swimming pools or bathrooms. • Do not open the back cover using wet hands or when the device is wet. • The rubb er seal tted to the back cover is an important component of the device. Take care when opening and closing the back cover to avoid damaging the rubber seal. Also, ensure that the rubber seal is free from debris, such as sand or dust to prevent damage to the device. • Do not expose the device to salt water, ionised water, or soapy water. • The back cover may be loosened if the device is dropped or receives an impact. Ensure that the back cover is properly aligned and tightly closed. • If the device has been immersed in water or the microphone or the speaker is wet, sound may not be heard clearly during a call. Ensure that the microphone or the speaker is clean and dry by wiping it with a dry cloth. • If the device gets wet, dry it thoroughly with a clean, soft cloth. • The water-resistant design of the device causes it to vibrate slightly in certain conditions. V ibrations in these conditions, such as when the volume level is high are normal and do not aect the device’s performance. • The touch screen and other features may not work properly if the device is used in water or in other liquids. Y our device has been tested in a controlled environment and certied to be water- and dust-resistant in specic situations ( meets requirements of classication IP67 as described by the international standard IEC 60529 - Degrees of P rotection provided by Enclosures [IP C ode]; test conditions: 1 5 - 35 °C, 8 6 - 106 kP a, 1 meter, 3 0 minutes). Despite this classication, your device is not impervious to water damage in any situation. Specic Absorption Rate (SAR) certication information T o view more information about the device’ s SAR certication, tap → Settings → General → About device → Legal information → Safety information. THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES Your mobile is designed not to exceed the limits…

Text truncated - open the document above for the full version.

August 26, 2014 Federal Comm unications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: A3LSMT365 To Whom It May Concern: Purs uant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics Block Diagram Operational Description Antenna Specification Parts List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and such information will be available for public review once the grant of equipment authorization is issued. Best Regards CHANHO, YOUN General Manager Samsung Electronics CO. LTD TEL: +1-973-808-6362 E-mail: [email protected]

Date: July 23, 2014 UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: comply with the relevant provisions of the certification program; a) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; b) make claims regarding certification only in respect of the scope for which certification has been granted; c) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; d) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; e) use certification only to indicate the products are certified as being in conformity with specified standards; f) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; g) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; h) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; i) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; j) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, CHANHO, YOUN General Manager Samsung Electronics CO. LTD TEL: +1-973-808-6362 E-mail: [email protected]

Label and Location Samsung Phone Model: SM-T365 FCC ID: A3LSMT365 Label: Location: Top Back of device Bottom

SAMSUNG ELECTRONICS CO., LTD 129, Samsung-ro,Yeongtong-gu Suwon-si,Gyeonggi-do, 443-742 Korea August 30, 2014 Federal Communica tions Commission 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT : Label Statement FCC ID : A3LSMT365 Gentlemen: We hereby provide the label statement letter for the above-mentioned device by a new label statement policy of KDB 784748 D01. The label statement is as follows: The FCC ID label is located in the battery compartment. While the battery cover is install ed when the unit is shipped from the factory, the battery is never installed prior to sale, s o the user must remove the cover in order to install the battery and operate the device. A t this time the FCC ID is readily visible to the user. The label is permanently attached by acrylic glue and not easily removed from the device. This statement could not be included in the label. So we inform you of it through this letter. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely Yours, CHANHO, YOUN General Manager Samsung Electronics CO. LTD TEL: +1-973-808-6362 E-mail: [email protected]

FCC 47 CFR Parts 1 & 2 Published RF Exposure KDB Procedures IEEE Std 1528-2013 SAR EVALUATION REPORT For GSM/WCDMA/LTE Phablet + Bluetooth, DTS/UNII a/b/g/n, ANT+ & NFC Model: SM-T365 FCC ID: A3LSMT365 Report Number: 14U18519-S1A Issue Date: 9/2/2014 Prepared for Samsung Electronics Co., Ltd. 416, Maetan 3-Dong, Yeongtong-Gu Suwon-City, GyeonGggi-Do 443-742, South Korea Prepared by UL Verification Services Inc. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 Report No.: 14U18519-S1A Issue Date: 9/2/2014 FCC ID: A3LSMT365 Page 2 of 65 UL Verification Services Inc. FORM NO: CCSUP4031G 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By -- 8/26/2014 Initial Issue -- A 9/2/2014 Section 4.1: Updated Calibration Due Dates Section 7.5: Updated Power Reduction Line Item Coltyce Sanders Report No.: 14U18519-S1A Issue Date: 9/2/2014 FCC ID: A3LSMT365 Page 3 of 65 UL Verification Services Inc. FORM NO: CCSUP4031G 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Table of Contents 1. Attestation of Test Results ............................................................................................................. 6 2. Test Methodology ........................................................................................................................... 7 3. Facilities and Accreditation ........................................................................................................... 7 4. Calibration and Uncertainty ........................................................................................................... 8 4.1. Measuring Instrument Calibration .............................................................................................. 8 4.2. Measurement Uncertainty .......................................................................................................... 8 5. Measurement System Description and Setup ............................................................................... 9 6. SAR Measurement Procedure ...................................................................................................... 10 6.1. Normal SAR Measurement Procedure ..................................................................................... 10 6.2. Volume Scan Procedures ........................................................................................................ 12 7. Device Under Test ......................................................................................................................... 13 7.1. General Information ................................................................................................................. 13 7.2. Wireless Technologies ............................................................................................................. 14 7.3. RF Output Power Tolerance .................................................................................................... 15 7.4. Simultaneous Transmission Condition ..................................................................................... 16 7.5. General LTE SAR Test and Reporting Considerations ............................................................. 17 7.6. Power Reduction by Proximity Sensing ................................................................................... 18 7.6.1. Proximity Sensor Triggering Distance (KDB 616217 §6.2) ................................................ 18 7.6.2. Proximity Sensor Triggering Distance Measurement Results ............................................ 19 7.6.3. Proximity Sensor Coverage (KDB 616217 §6.3) ............................................................... 25 7.6.4. Proximity Sensor Tilt Angle Assessment (KDB 616217 §6.4) ............................................ 25 7.7. Protrusions on the DUT ........................................................................................................... 26 8. RF Exposure Conditions .............................................................................................................. 27 8.1. Standalone SAR Test Exclusion Considerations ...................................................................... 27 8.2. Required Test Configurations .................................................................................................. 29 8.3. Additional Test Scenarios ........................................................................................................ 29 9. RF Output Power Measurement ................................................................................................... 30 9.1. GSM ........................................................................................................................................ 30 9.2. W-CDMA ................................................................................................................................. 32 9.3. LTE Band ................................................................................................................................. 38 9.4. Wi-Fi (2.4 GHz Band) ............................................................................................................... 41 9.5. Wi-Fi (5 GHz Bands) ................................................................................................................ 42 Report No.: 14U18519-S1A Issue Date: 9/2/2014 FCC ID: A3LSMT365 Page 4 of 65 UL Verification Services Inc. FORM NO: CCSUP4031G 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.…

Text truncated - open the document above for the full version.

Plot No. 1 Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date: 8/14/2014 20140814_SystemPerformanceCheck-D2450V2 SN 899 Frequency: 2450 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 2450 MHz; σ = 1.853 S/m; ε r = 38.257; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Averaged Fast SAR: Polynomial fit - Electronics: DAE3 Sn427; Calibrated: 1/21/2014 - Probe: EX3DV4 - SN3902; ConvF(7.29, 7.29, 7.29); Calibrated: 5/19/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: TP 1751 Head/Pin=100 mW/Area Scan (71x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Reference Value = 64.604 V/m; Power Drift = 0.04 dB Fast SAR: SAR(1 g) = 5.72 W/kg; SAR(10 g) = 2.5 W/kg Maximum value of SAR (interpolated) = 8.34 W/kg Head/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 64.604 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 12.1 W/kg SAR(1 g) = 5.58 W/kg; SAR(10 g) = 2.52 W/kg Maximum value of SAR (measured) = 8.05 W/kg 0 dB = 8.05 W/kg = 9.06 dBW/kg Plot No. 2 Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date: 8/14/2014 20140814_SystemPerformanceCheck-D2450V2 SN 899 Frequency: 2450 MHz; Duty Cycle: 1:1 Head/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 7.51 W/kg Plot No. 3 Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date: 8/10/2014 20140810_SystemPerformanceCheck-D5GHzV2 SN 1138 Frequency: 5200 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 5200 MHz; σ = 5.279 S/m; ε r = 49.447; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Averaged Fast SAR: Polynomial fit - Electronics: DAE3 Sn427; Calibrated: 1/21/2014 - Probe: EX3DV4 - SN3902; ConvF(4.76, 4.76, 4.76); Calibrated: 7/12/2013; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI-B v5.0; Type: QDOVA002AA; Serial: TP:1195 Body/5.2 GHz, Pin=100mW/Area Scan (61x61x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value = 49.059 V/m; Power Drift = -0.05 dB Fast SAR: SAR(1 g) = 6.55 W/kg; SAR(10 g) = 1.86 W/kg Maximum value of SAR (interpolated) = 16.8 W/kg Body/5.2 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 49.059 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 29.5 W/kg SAR(1 g) = 6.69 W/kg; SAR(10 g) = 1.94 W/kg Maximum value of SAR (measured) = 15.9 W/kg 0 dB = 15.9 W/kg = 12.01 dBW/kg Plot No. 4 Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date: 8/10/2014 20140810_SystemPerformanceCheck-D5GHzV2 SN 1138 Frequency: 5200 MHz; Duty Cycle: 1:1 Body/5.2 GHz, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 11.4 W/kg Plot No. 5 Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date: 8/10/2014 20140810_SystemPerformanceCheck-D5GHzV2 SN 1138 Frequency: 5600 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 5600 MHz; σ = 5.781 S/m; ε r = 48.85; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Averaged Fast SAR: Polynomial fit - Electronics: DAE3 Sn427; Calibrated: 1/21/2014 - Probe: EX3DV4 - SN3902; ConvF(3.93, 3.93, 3.93); Calibrated: 7/12/2013; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI-B v5.0; Type: QDOVA002AA; Serial: TP:1195 Body/5.6 GHz, Pin=100mW/Area Scan (61x61x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value = 51.476 V/m; Power Drift = 0.08 dB Fast SAR: SAR(1 g) = 8.02 W/kg; SAR(10 g) = 2.21 W/kg Maximum value of SAR (interpolated) = 21.6 W/kg Body/5.6 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 51.476 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 38.1 W/kg SAR(1 g) = 8.25 W/kg; SAR(10 g) = 2.32 W/kg Maximum value of SAR (measured) = 20.3 W/kg 0 dB = 20.3 W/kg = 13.07 dBW/kg Plot No. 6 Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date: 8/10/2014 20140810_SystemPerformanceCheck-D5GHzV2 SN 1138 Frequency: 5600 MHz; Duty Cycle: 1:1 Body/5.6 GHz, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 13.6 W/kg Plot No. 7 Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date: 8/21/2014 20140820_SystemPerformanceCheck-D5GHzV2 SN 1138 Frequency: 5800 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 5800 MHz; σ = 6.169 S/m; ε r = 45.933; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Averaged Fast SAR: Polynomial fit - Electronics: DAE3 Sn427; Calibrated: 1/21/2014 - Probe: EX3DV4 - SN3902; ConvF(4.11, 4.11, 4.11); Calibrated: 5/19/2014; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI-B v5.0; Type: QDOVA002AA; Serial: TP:1195 Body/5.8 GHz, Pin=100mW/Area Scan (61x61x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value = 50.532 V/m; Power Drift = 0.09 dB Fast SAR: SAR(1 g) = 7.15 W/kg; SAR(10 g) = 1.96 W/kg Maximum value of SAR (interpolated) = 19.7 W/kg Body/5.8 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 50.532 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 35.0 W/kg SAR(1 g) = 7.7 W/kg; SAR(10 g) = 2.14 W/kg Maximum value of SAR (measured) = 19.5 W/kg 0 dB = 19.5 W/kg = 12.90 dBW/kg Plot No. 8 Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date: 8/21/2014 20140820_SystemPer…

Text truncated - open the document above for the full version.

FCC 47 CFR PART 15 SUBPART E CERTIFICATION TEST REPORT FOR GSM/WCDMA/LTE Phablet + Bluetooth & WLAN DTS/UNII a/b/g/n + ANT+ and NFC MODEL NUMBER: SM-T365 FCC ID: A3LSMT365 REPORT NUMBER: 14U18519-E5, REVISION A ISSUE DATE: AUGUST 29, 2014 Prepared for SAMSUNG ELECTRONICS CO., LTD. 416, MAETAN 3-DONG, YEONGTONG-GU SUWON-CITY, GYEONGGI-DO 443-742, SOUTH KOREA Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 14U18519‐E5A DATE: AUGUST 29, 2014 MODEL NUMBER: SM‐T365 FCC ID: A3LSMT365 Page 2 of 241 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771‐1000 FAX: (510) 661‐0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By 08/22/13 Initial Issue P. Zhang A 8/29/14 Updated page 14, 20 ,24, 29; and statement in section 2 P. Zhang REPORT NO: 14U18519‐E5A DATE: AUGUST 29, 2014 MODEL NUMBER: SM‐T365 FCC ID: A3LSMT365 Page 3 of 241 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771‐1000 FAX: (510) 661‐0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 6 2. TEST METHODOLOGY ........................................................................................................ 7 3. FACILITIES AND ACCREDITATION .................................................................................... 7 4. CALIBRATION AND UNCERTAINTY .................................................................................. 7 4.1. MEASURING INSTRUMENT CALIBRATION ................................................................ 7 4.2. SAMPLE CALCULATION ............................................................................................... 8 4.3. MEASUREMENT UNCERTAINTY ................................................................................. 8 5. EQUIPMENT UNDER TEST ................................................................................................. 9 5.1. DESCRIPTION OF EUT ................................................................................................. 9 5.2. MAXIMUM OUTPUT POWER ........................................................................................ 9 5.3. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................. 10 5.4. WORST-CASE CONFIGURATION AND MODE .......................................................... 11 5.5. DESCRIPTION OF TEST SETUP ................................................................................ 12 6. TEST AND MEASUREMENT EQUIPMENT ....................................................................... 14 7. SUMMARY TABLE ............................................................................................................. 15 8. ON TIME, DUTY CYCLE AND MEASUREMENT METHODS ............................................ 16 8.1. ON TIME AND DUTY CYCLE RESULTS ..................................................................... 16 8.2. DUTY CYCLE PLOTS .................................................................................................. 17 9. MEASUREMENT METHOD ................................................................................................ 20 10. ANTENNA PORT TEST RESULTS .................................................................................... 21 10.1. 26 dB BANDWIDTH .................................................................................................. 21 10.1.1. 802.11a MODE IN THE 5.2 GHz BAND ................................................................ 21 10.1.2. 802.11n HT20 MODE IN THE 5.2 GHz BAND ...................................................... 21 10.1.3. 802.11n HT40 MODE IN THE 5.2 GHz BAND ...................................................... 21 10.1.1. 802.11a MODE IN THE 5.3 GHz BAND ................................................................ 22 10.1.1. 802.11n HT20 MODE I N THE 5.3 GHz BAND ...................................................... 22 10.1.2. 802.11n HT40 MODE IN THE 5.3 GHz BAND ...................................................... 22 10.1.3. 802.11a MODE IN THE 5.5 GHz BAND ................................................................ 22 10.1.4. 802.11n HT20 MODE IN THE 5.5 GHz BAND ...................................................... 23 10.1.5. 802.11n HT40 MODE IN THE 5.5 GHz BAND ...................................................... 23 10.1.6. 802.11a MODE IN THE 5.8 GHz BAND ................................................................ 23 10.1.7. 802.11n HT20 MODE IN THE 5.8 GHz BAND ...................................................... 23 10.1.8. 802.11n HT40 MODE IN THE 5.8 GHz BAND ...................................................... 24 REPORT NO: 14U18519‐E5A DATE: AUGUST 29, 2014 MODEL NUMBER: SM‐T365 FCC ID: A3LSMT365 Page 4 of 241 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771‐1000 FAX: (510) 661‐0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 10.1.1. 26 dB BANDWIDTH PLOTS ................................................................................. 25 10.2. 99% BANDWIDTH .................................................................................................... 27 10.2.1. 802.11a MODE IN THE 5.2 GHz BAND ................................................................ 27 10.2.2. 802.11n HT20 MODE IN THE 5.2 GHz BAND ...................................................... 27 10.2.3. 802.11n HT40 MODE IN THE 5.2 GHz BAND ...................................................... 27 10.2.4. 802.11a MODE IN…

Text truncated - open the document above for the full version.

Project No.: 14U18519 DUT and SAR Set-up Photos Overall Dimensions 126.1 mm Earpiece 212.95 mm 203.1 mm 239 mm Project No.: 14U18519 Front View of the DUT Rear View of the DUT Project No.: 14U18519 Front View of the DUT with Case Rear View of the DUT with Case Proj…

Text truncated - open the document above for the full version.