A3LSPHM510Dual-Band CDMA Phone with Bluetooth

* Depending on the software installed or your service provider or country, some of the descriptions in this guide may not match your phone exactly. * Depending on your country, your phone and accessories may appear different from the illust rations in this guide. World Wide Webhttp://www.samsungmobile.com SPH-M510User’s Guide Intellectual PropertyAll Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relati ng to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and intern ational treaty provisions. Intellectual Property includ es, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers. Samsung Telecommunications America (STA), Inc.Headquarters:1301 East Lookout Drive Suite 150 Richardson, TX 75082 Internet Address: http://www.samsungusa.com©2004 Samsung Telecommunications America, Inc. is a registered trademark of Samsung Electronics America, Inc. and its related entities.Licensed by Qualcomm Incorporated under one or more of the following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5,101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.Printed in South KoreaGH68-xxxxxAOpenwave® is a registered Trademark of Openwave, Inc.RSA® is a registered TrademarSk RSA Security, Inc. Disclaimer of Warranties; Exclusion of LiabilityEXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS. Drive safely at all timesDo not use a hand-held phone while driving. Park the vehicle first. Switch off the phone when refuellingDo not use the phone at a refuelling point (service station) or near fuels or chemicals.Switch off in an aircraftWireless phones can cause interference. Using them in an aircraft is both illegal and dangerous. Switch off the phone near all medical equipmentHospitals or health care facilities may be using equipment that could be sensitive to external radio frequency energy. Follow any regulations or rules in force.InterferenceAll wireless phones may be subject to interference, which could affect their performance. Important safety precautions Failure to comply with the following precautions may be dangerous or illegal. Important safety precautions 1 Be aware of special regulationsMeet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.Water resistanceYour phone is not water-resistant. Keep it dry. Sensible useUse only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on.Emergency callsKey in the emergency number for your present location, then press . Keep your phone away from small children Keep the phone and all its parts, including accessories, out of the reach of small children. Accessories and batteriesUse only Samsung-approved batteries and accessories, such as headsets and PC data cables. Use of any unauthorized accessories could damage you or your phone and may be dangerous.Qualified serviceOnly qualified service personnel may repair your phone.For more detailed safety inf ormation, see "Safety" on page 19. • The phone could explode if the battery is replaced with an incorrect type. • Dispose of used batteries according to the manufacturer’s instructions. At very high volumes, prolonged listening to a headset can damage your hearing. 2 Contents Unpack 3 Make sure you have each itemYour phone 3 Keys, features, and locationsGet started 4 First steps to operating your phoneInstall and charge the phone ..................................... 4Power on or off........................................................ 5Keys ...................................................................... 6Menu functions 9 All menu options listed Solve problems 17 Help and personal needsSafety 19 3 Unpack Make sure you have each itemYou can obtain various accessories from your local Samsung dealer. Phone Travel Adapter Battery User’s Guide The items supplied with your phone and the accessories available at your Samsung dealer may vary, depending on your country or service provider. Yo u r p h o n e Keys, features, and locations Microphone Power on/off/ Menu exit key Speaker key Right soft key Alphanumeric keys Earpiece Main display Menu access/ Confirm k…

Text truncated - open the document above for the full version.


  
       














18600 Broadwick Street






November 29, 2006        !"# $%&' ( &) "*   +,-   . / (0+1+//2(34 (5 /5 ///5 /4(0+1+// 2( 34(5555,4  .(5(65(5 / (5 1 # )57/(5)8 )94144 *4    1    1: ;&/ 1&19<;3<4 SAMSUNG ELECTRONICS CO.,LTD. 416 Maetan3-Dong Yeongtong-gu, Suwon city, Gyeonggi-Do, Korea 442-742 Date: November 29, 2006 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: A3LS PHM510 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, SAMSUNG ELECTRONICS CO.,LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give SAMSUNG ELECTRONICS CO.,LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested Confidential and Temporary Confidential exhibits are listed as follows: CONFIDENTIAL AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description 1 Block Diagram 2 Operational Descriptions 3 Parts Lists and Tune-Up Procedure CONFIDENTIAL 4 Schematics 5 External Photos 6 Internal Photos 7 Test-Setup Photos SHORT-TERM CONFIDENTIAL 8 User’s Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, SEOUNG HO PARK SAMSUNG ELECTRONICS CO.,LTD. SAMSUNG ELECTRONICS AMERICA, INC. American QA Lab 18600 Broadwick St. Rancho Dominguez, CA 90220 DATE : November 28, 2006 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Subject: HAC filing FCC ID: A3LSPHM510 Gentlemen: We, Samsung Electronics, hereby declare the samples evaluated in this application are equivalent to production samples. Should you have any questions or comments concerning the above, please contact the undersigned. Steve Kim General Manager American QA Lab SAMSUNG Electronics America INC.

------- Original Message ------- Sender : PCTEST TCB<[email protected]> Date : 2006-12-09 05:22 Title : Follow-up Question for A3LSPHM510 (12-08-06) To: Mr. Seoung Ho Park / Samsung Electronics Co., Ltd. From: Mr. Gregory Czumak / PCTEST TCB RE: FCC ID: A3LSPHM510 Applicant: Samsung Electronics Co., Ltd. Correspondence Reference Number: A3L0788 Confirmation Number: 12010788-89 Date of Original Email: December 08 , 2006 Subject: Request for additional information In regards to your recent TCB application referenced above, we kindly request that you provide the following additional information. 1. I note that you have not yet responded to question #1 from our previous email ==> Corrected 2. The document RCSO Table submitted in response to our previous question still appears to list power values up to 0.45 dB higher than the corresponding values in the tables in the SAR and EMC reports. Please address this discrepancy. ==> Corrected 3. Please check the 80%AM plot on Page 15. The reference level does not appear to be correct. ==> Corrected 4. Please confirm if the phone ear reference point contact is parallel to the HAC phantom. Please ensure the photographs show that this contact is correct. ==> The photographs are correct. We confirm that the phone ear reference point contact is parallel to the HAC phantom. 5. Please supply the HAC probe rotation maximum time averaged field vcalue. This value should be the peak reading from the 360 rotation according to the graph supplied. ==> Corrected 6. Please confirm or revise HAC data reported in Section 9. The correct measurement should be Time Averaged Field * PMF = Peak Field. The PMF must be accounted for in this section, similar to Section 10. ==> Corrected 7 . Please supply Backlight on data for HAC, or alternatively supply a statement in the Users Manual informing the user to turn off the backlight for HAC compliance. ==> Corrected FYI - C63.19-2006 version date is from January 2006 and not April 2005. ==> Corrected The items indicated above must be submitted before processing can continue on the above referenced application. Sincerely, Gregory Czumak Quality Manager Senior Certification Engineer PCTEST Engineering Laboratory, Inc. <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" />6660-B Dobbin Road Columbia, MD 21045 410-290-6652 410-290-6654 (Fax) [email protected] This communication and its attachments contain information from PCTEST Engineering Laboratory, Inc., and is intended for the exclusive use of the recipient (s) named above. It may contain information that is confidential and/or legally privileged. Any unauthorized use that may compromise that confidentiality via distribution or disclosure is prohibited. Please notify the sender immediately if you receive this communication in error, and delete it from your computer system. Usage of PCTEST email addresses for non-business related activities is strictly prohibited. No warranty is made that the e-mail or attachment(s) are free from computer virus or other defect. Thank you. ----------------------------------------------------------------- SEOUNG HO PARK Senior Manager SAMSUNG ELECTRONICS CO.,LTD Telecommunication Network Business Mobile Communication Division Regulatory Compliances Group TEL : 82-31-301-2841 FAX : 82-31-279-7799 E-Mail : [email protected] SAR/EMC 1. The SAR probe calibration report submitted with the application is over one year old- this is not permitted. Pursuant to FCC policy, SAR probes must be calibrated in accordance with the manufacturer’s specification, and, according to SPEAG, this is yearly. I note that the conversion factors listed in this cal report do not match the values used in the actual SAR tests- perhaps an old report was submitted by mistake? If so, please submit the most recent cal report for the SAR probe used for testing. ==> Corrected 2. The spurious radiated emission data tables for Part 22/24 have the dBc values and polarities in the wrong columns. Also, in the PCS table, the dBc values for the 6 th and 7 th harmonics appear to be incorrect. Please address. ==> Corrected 3. The document RCSO Table lists power values up to 0.5 dB higher than the corresponding values in the tables in the SAR and EMC reports. Please address this discrepancy. ==> Corrected 4. The Bluetooth antenna gain is listed as 4.2 dBi in the Request Email, and as 4.2 linear gain (6.2 dBi) in the antenna technical description. Please address this discrepancy. Also, I note that this seems quite high for a chip antenna- please verify that it is correct. ==> Corrected HAC 5. Please supply uncertainty result for the field instead of power. ==> Corrected 6. Please revise the HAC Validation dates on Page 13. They contain invalid dates. ==> Corrected 7. Please clarify PMF table in Page 15. It appears that the PMF data is inconsistent. 80% AM should also be tested with a 1kHz modulation frequency. ==> Corrected 8. We note RC5/SO17 was used during the HAC RF Emissions Testing. This mode is not applicable for HAC Testing since this mode is not normally used in live networks. Please justify mode used, or retest if necessary. ==> Corrected 9. Please update the C63.19 references to "C63.19-2006" 2006 version ==> Corrected 10. Please supply a clearer test setup photo to confirm proper device setup on HAC phantom ==> Corrected 11. Please submit probe rotation analysis at the worst-case measurement location. ==> Corrected 12. Please submit a RF emission overlay for the worst-case E and H field plots over the actual device. ==> Corrected 13. Please send a stage of production letter for the device tested. ==> Corrected 14. Please confirm if during HAC Testing the Bluetooth was turned off. ==> Corrected 15. The Section 9 measurement tables do not appear to have correct peak field information. Please check calculations. ==> Corrected The items indicated above must be submitted before processing can continue on the above referenced application. Sincerely,…

Text truncated - open the document above for the full version.

FOR INFORMATION CALL 1-888-211-4PCS FCC ID:A3LSPHM510 PORTABLE Digital Dualband PHONE MODEL:SPH-M510

of 33 SAMSUNG ELECTRONICS Co., Ltd., Regulatory Compliance Group IT R&D Center 416, Maetan-3dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 443-742 TEST REPORT ON SAR Model Tested: SPH-M510 FCC ID (Requested): A3LSPHM510 Job No: FD-200 Report No: FD-200-S1 Date issued: Nov.23, 2006 - Abstract – This document reports on SAR Tests carried out in accordance with FCC/OET Bulletin 65, Supplement C(July 2001). Prepared By DK LEE - Test Engineer Checked By JH NAM - Senior Engineer Authorized By SH PARK - Senior Manager Report Number: FD-200-S1 2 of 33 Contents 1. GENERAL INFORMATION............................................................................................................. 3 2. DESCRIPTION OF DEVICE ........................................................................................................... 3 3. DESCRIPTION OF TEST EQUIPMENT ......................................................................................... 4 3.1 SAR Measurement Setup ......................................................................................................4 3.2 E-field Probe .......................................................................................................................... 6 3.3 SAM Phantom ........................................................................................................................ 8 3.4 Brain & Muscle Simulating Mixture Characterization ............................................................. 8 3.5 Device Holder for Transmitters ..............................................................................................9 3.6 Validation Dipole .................................................................................................................... 9 3.7 Equipment Calibration.......................................................................................................... 10 4. SAR MEASUREMENT PROCEDURE ......................................................................................... 11 5. DESCRIPTION OF TEST POSITION ........................................................................................... 12 5.1 SAM Phantom Shape...........................................................................................................12 5.2 Cheek/Touch Position .......................................................................................................... 12 5.3 EAR/Tilt 15° Position ............................................................................................................ 14 5.4 Body Holster/Belt Clip Configurations.................................................................................. 15 6. MEASUREMENT UNCERTAINTY................................................................................................ 17 7. SYSTEM VERIFICATION ............................................................................................................. 19 7.1 Tissue Verification ................................................................................................................ 19 7.2 Test System Validation ......................................................................................................... 19 8. SAR MEASUREMENT RESULTS ................................................................................................ 20 8.1 Measurement Results(CDMA Right Head SAR - Touch) ..................................................... 22 8.2 Measurement Results(CDMA Right Head SAR - Tilt) .......................................................... 23 8.3 Measurement Results(CDMA Left Head SAR - Touch) ....................................................... 24 8.4 Measurement Results(CDMA Left Head SAR - Tilt) ............................................................ 25 8.5 Measurement Results(CDMA Body SAR without Holster)................................................... 26 8.6 Measurement Results(PCS Right Head SAR - Touch) ........................................................ 27 8.7 Measurement Results(PCS Right Head SAR - Tilt) ............................................................. 28 8.8 Measurement Results(PCS Left Head SAR - Touch) .......................................................... 29 8.9 Measurement Results(PCS Left Head SAR - Tilt) ............................................................... 30 8.10 Measurement Results(PCS Body SAR without Holster).................................................... 31 9. CONCLUSION .............................................................................................................................. 32 10. REFERENCES ............................................................................................................................ 33 Report Number: FD-200-S1 3 of 33 1. GENERAL INFORMATION Test Sample : Dual-Band CDMA Phone with Bluetooth Model Number : SPH-M510 Serial Number : Identical prototype (S/N : # FD-200-G) Manufacturer : SAMSUNG ELECTRONICS Co., Ltd. Contact : YM KWON Phone : 82-54-479-5931 Fax : 82-54-479-5866 Test Standard : §2.1093; FCC/OET Bulletin 65, Supplement C(July 2001) FCC Classification : Licensed Portable Transmitter Held to Ear (PCE) Test Dates : Nov.16, 2006 ~ Nov.17, 2006 Tested for : FCC/TCB Certification 2. DESCRIPTION OF DEVICE Tx Freq. Range : 824.70 ~ 848.31 MHz (CDMA) 1851.25 ~ 1908.75 MHz (PCS) 2402 ~ 2480 MHz (Bluetooth) Rx Freq. Range : 869.70 ~ 893.31 MHz (CDMA) 1931.25 ~ 1988.75 MHz (PCS) 2402 ~ 2480 MHz (Bluetooth) Max. RF Output Power : 0.247 W ERP CDMA (23.93 dBm) 0.484 W EIRP PCS (26.85 dBm) Antenna Manufacturer : SB TELCOM Model No.: SPH-M510 Antenna Antenna Dimensions : 52.2mm EV-DO Support (Revision 0) CDMA 2000 1x Support Report Number: FD-200-S1 4 of 33 3. DESCRIPTION OF TEST EQUIPMENT 3.1 SAR Measurement Setup Robotic System Measurements are performed using the DASY4 automated dosimetric assessment system. Which is made by Schmid & Partner Engineering AG (SPEAG) in Zurich, Switzerland and consists of high precisi…

Text truncated - open the document above for the full version.

SAMSUNG ELECTRONICS Co., Ltd., Regulatory Compliance Group IT R&D Center 416 Maetan3-Dong, Yeongtong-gu, Suwon city, Gyeonggi-Do, Korea 443-742 FCC CFR47 PART 22 & 24 SUBPART CERTIFICATION REPORT Model Tested: SPH-M510 FCC ID (Requested): A3LSPHM510 Report No: FD-200-R1 Job No: FD-200 Date issued: November 21, 2006 - Abstract – All measurement reported here in accordance with FCC Rules, 47CFR Part2, Part22, Part24. Prepared By JW LEE– Test Engineer Checked By WW JANG – Manager Authorized By SH PARK – Senior Manager © Copyright SAMSUNG Electronics 2006 Report Number : FD-200-R1 TABLE OF CONTENT MEASUREMENT REPORT Page 1. FCC Certification Information 3 1.1 2.1033 General Information 3 2. INTRODUCTION 4 2.1 General 4 3. MEASURING INSTRUMENT CALIBRATION 5 4. TEST EQUIPMENT LIST 6 5. DESCRIPTION OF TESTS 7 5.1.Output Power Variation 7 5.2 Effective Radiated Power/Equivalent Isotropic Radiated Power 8 5.3 Radiated Spurious & Harmonic Emission 9 5.4 Occupied Bandwidth 11 5.5 Spurious and Harmonic Emissions at Antenna Terminal 11 5.5.1 Occupied Bandwidth Emission Limits 11 5.5.2 Conducted Spurious Emission 12 5.6 Frequency Stability / Temperature Variation 13 6. TEST DATA 14 6.1 Effective Radiated Power(E.R.P.) 14 6.2 Equivalent Isotropic Radiated Power(E.I.R.P.) 15 6.3 Cellular CDMA Radiated Spurious & Harmonic Measurement 16 6.4 PCS CDMA Radiated Spurious & Harmonic Measurement 17 6.5 CDMA Radiated Spurious & Harmonic Conversion Table 18 6.6 PCS Radiated Spurious & Harmonic Conversion Table 19 6.7 Frequency Stability 20 6.7.1 CDMA Frequency Stability Table 20 6.7.2 PCS Frequency Stability Table 21 6.7.3 CDMA Frequency Stability Graph 22 6.7.4 PCS Frequency Stability Graph 24 7.SAMPLE CALCULATION 26 7.1 Emission Designator 8. CONCLUSION 27 9. TEST PLOTS 28 Report Number : FD-200-R1 MEASUREMENT REPORT 1. FCC Certification Information The following information is in accordance with FCC Rules, 47CFR Part2, Subpart J, Sections 2.1033 – 2.1055. 1.1 §2.1033 General Information Applicant Name: SAMSUNG ELECRONICS CO., LTD. Address: 416 Maetan3-Dong, Yeongtong-gu, Suwon City Gyeonggi-Do, Korea 443-742 Attention: FCC ID: SungJoo KIM, Engineering Manager (QA Lab) A3LSPHM510 Quantity: Quantity production is planned Emission Designators: 1M2 8F9W (CDMA) 1M28F9W (PCS CDMA) Tx Freq. Range: 824.70-848.31MHz (CDMA) 1851.25-1908.75MHz (PCS CDMA) Rx Freq. Range: 869.70-893.31 MHz (CDMA) 1931.25-1988.75 MHz (PCS CDMA) Max. Power Rating: 0.247 W ERP CDMA( 23.93 dBm) 0.484 W EIRP PCS CDMA ( 26.85 dBm) FCC Classification(s): Licensed Portable Tx Held to Ear (PCE) Equipment (EUT) Type: Dual-Band CDMA Phone with Bluetooth Modulation(s): CDMA Frequency Tolerance: 0.00025% (2.5ppm) FCC Rule Part(s): 24(E), 22(H), 2. Dates of Test: November 16 - 18, 2006 Place of Test: SAMSUNG Lab, Test Report S/N: FD-200-R1 Report Number : FD-200-R1 2. INTRODUCTION 2.1 General These measurement test were conducted at SAMSUNG ELECTRONICS CO., LTD(SUWON). The site address is 416 Maetan3-Dong, Yeongtong-gu, Suwon City, Gyeonggi-Do, Korea 443-742 The site have 1 Fully-anechoic chamber and measurement facility. Measurement Procedure The radiated and spurious measurements were made Fully-anechoic chamber at a 3-meter test range (see Figure2). The equipment under testing was placed on a wooden turntable 3-meters from the receive antenna. The receive antenna height and turntable rotations were adjusted for the highest reading on the receive spectrum analyzer. The substitution antenna will replace the EUT antenna it the same position and in vertical polarization. The frequency of the signal generator shall be set to the frequencies that were measured on the EUT. The test antenna shall be raised and lowered, if necessary, to ensure that the maximum signal is still being received. The signal generator, output level, shall be adjusted until an equal or a known related level to what was measured from the EUT is obtained in the spectrum analyzer. This level was recorded. For readings above 1 GHz, the above procedure is repeated using horn antennas and the difference between the gain of the horn and an isotropic antenna are taken into consideration. Figure1. Map of the Suwon City area. Fi gure2. Photograph of 3m Fully-Anechoic Chamber Report Number : FD-200-R1 3.MEASURING INSTRUMENT CALIBRATION The measuring equipment, which was utilized in performing the tests documented herein, has been calibrated in accordance with the manufacturer’s recommendations for utilizing calibration equipment, which is traceable to recognized national standards. - End of page - Report Number : FD-200-R1 4. TEST EQUIPMENT LIST Name Of Equipment Model Serial No. Due Date Spectrum Analyzer ESI26 836119/010 2007-10-01 E4440A(3Hz~26.5GHz)MY41000236 2007-04-14 E4440A(3Hz~26.5GHz)MY41000233 2007-04-05 Signal Generator SMIQ03B 83824/021 2006-12-07 SMR20 835197/030 2007-01-10 Power Meter E4419B GB41293846 2007-09-06 Power Sensor E9300B MY41495557 2007-04-17 Amplifier 5S1G4 304866 2007-10-19 Pre-Amplifier 8449B 3008A00691 2007-01-02 Communication test set 8960 GB42230535 2007-01-02 8960 GB42360886 2007-07-03 Antenna Master MA240 240/618 Not Required Controller HD100 100/756 Not Required Environmental Chamber SH-241 92000548 2006-11-22 SH-241 92000549 2006-11-22 Horn Antenna HF906 360306/011 2007-03-31 Dipole Antenna 3121C-DB4 9007-587 2006-12-02 Receive Antenna HL040 353255/020 2007-04-25 Divider 11636B 51941 Not Required 11636B 51942 Not Required 11636B 51946 Not Required High Pass Filter WHK1.0/15G-10SS 1 Not Required WHK/3.5/18G-10SS 4 Not Required Shielded Fully Anechoic Chamber CHAMBER ANT0001 Not Required Report Number : FD-200-R1 5. DESCRIPTION OF TESTS 5.1 Output Power Variation Test Condition to measure the Output Power This device was tested under all R.C.s and S.O.s and worst case is reported with RC3/SO55, with “All Up” power control bits. The following procedures were followed according to FCC “SAR Measurement Procedures for 3G Devices”, May 2006. 1. If the mobile stati…

Text truncated - open the document above for the full version.

1 of 20 SAMSUNG ELECTRONICS Co., Ltd., Regulatory Compliance Group IT R&D Center 416, Maetan-3dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 443-742 TEST REPORT ON HAC Model Tested: SPH-M510 FCC ID (Requested): A3LSPHM510 Job No: AD-076 Report No: AD-076-M1 Date issued: Dec.07, 2006 Result Summary: M3 (RF EMISSION Category) - Abstract - This document reports on HAC Tests carried out in accordance with ANSI C63.19(2006), FCC Rule Part(s) FCC 47 CFR §20.19, §6.3, §7.3 Prepared By JD JANG – Test Engineer Checked By JH NAM – Senior Engineer Authorized By SH PARK – Senior Manager Report Number: AD-079-M1 2 of 20 Contents 1. GENERAL INFORMATION............................................................................................................. 3 2. DESCRIPTION OF DEVICE ........................................................................................................... 3 3. DESCRIPTION OF TEST EQUIPMENT ......................................................................................... 4 3.1 HAC Measurement Setup ......................................................................................................4 3.2 Probe Description................................................................................................................... 6 3.3 Test Arch Phantom ................................................................................................................. 7 3.4 Validation Dipole .................................................................................................................... 7 3.5 Equipment Calibration............................................................................................................ 8 4. HAC MEASUREMENT PROCEDURE ........................................................................................... 9 5. DESCRIPTION OF TEST POSITION ........................................................................................... 11 5.1 Measurement reference and plane .......................................................................................11 6. MEASUREMENT UNCERTAINTY................................................................................................ 12 7. SYSTEM VERIFICATION ............................................................................................................. 13 7.1 Test System Validation ......................................................................................................... 13 8. MODULATION FACTOR............................................................................................................... 14 8.1 Modulation Factors....................…

Text truncated - open the document above for the full version.