A3LVGTM2660Smart Control

Rev 1/26/2023 19 Chapin Rd, Building D. Pine Brook, New Jersey Tel No : 973-808-6375 Fax No : - Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 11-24-2025 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: A3LVGTM2660 Samsung Electronics Co Ltd, Inc certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0027908797 Name: Samsung Electronics Co Ltd Address: 19 Chapin Rd, Building D. Pine Brook, NJ 07058 Contact Person: JENNI CHUN Tel.: 973-808-6375 Email: [email protected] Sincerely, Samsung Electronics America JENNI CHUN / General Manager

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 10-23-2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: A3LVGTM2660 Samsung Electronics Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Samsung Electronics Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, HanSung You Samsung Electronics Co., Ltd. Date : 10/23/2025 Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 10-23-2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: A3LVGTM2660 Samsung Electronics Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, HanSung You Samsung Electronics Co., Ltd. Date : 10/23/2025

19 Chapin Rd, Building D. Pine Brook, New Jersey Tel No : 973-808-6375 Fax No : - Special Power of Attorney Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Product/ Model Number: Smart Control / VG-TM2660 I, JENNI CHUN of SAMSUNG Electronics Co., Ltd. hereby appoint HanSung You of SAMSUNG Electronics Co., Ltd. to represent me to act on my behalf to do any and all of the following : Sign on my behalf the agency, anti-drug and confidentiality cover letters and apply to FCC for the products. The right, powers and authority in fact to exercise any and all of the rights and powers herein granted shell commence and be in full force from 10/23/2025 and continue to 10/23/2026 effective unless specifically terminated by either party. This authorization is limited to the product of as following: FCC ID: A3LVGTM2660 Dated 10/23/2025, JENNI CHUN Sincerely,. NAME: JENNI CHUN TITLE: General Manager, Regulatory & Environmental Affairs Applicant: Samsung Electronics America, Inc Address: 19 Chapin Rd, Building D. Pine Brook, NJ 07058 Dated 10/23/2025

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date : Oct 23, 2025 SUBJECT: FCC Application for (FCC ID : A3LVGTM2660) To Whom It May Concern: We, the undersigned, hereby authorize Nam-Hyoung Kwon at CTK on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by CTK on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, HanSung You / Product Regulatory Engineering Manager Samsung Electronics Co., Ltd. Date : Oct 23, 2025

Rev 11/20/07 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID : A3LVGTM2660 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram Schematics Schematics_PCB Layout Parts List Operational Description (VG-TM2660)Block Diagram.pdf (VG-TM2660)Schematics.pdf (VG-TM2660)Schematics PCB Layout.pdf (VG-TM2660)Part List.pdf (VG-TM2660)Operational Description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below. following sections of the application are to be kept temporary confidential for 180 days: Exhibit Type File Name External Photo Internal Photo Test Setup Photo User Manual (VG-TM2660)External Photo.pdf (VG-TM2660)Internal Photo.pdf (VG-TM2660)Test Setup Photo.pdf Appendix E[FCC]SAR Test Photo_VG-TM2660.pdf (VG-TM2660)User Manual.pdf Sincerely, HanSung You / Product Regulatory Engineering Manager Samsung Electronics Co., Ltd. Date : 10/29/2025

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.elementkorea.kr Label Photographs and Location Label

TEST REPORT Report No. : KES-SR250226 Page 1 / 58 KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil,Dongan-gu, Anyang-si, Gyeonggi-do,14057, Korea Tel : +82-31-425-6200, Fax : +82-31-425-6200 KES-QP16-F01(00-23-01-01) KES Co., Ltd. The authenticity of the test report, contact [email protected] 1. Client ○ Name : Samsung Electronics Co., Ltd. ○ Address : 19 Chapin Rd, Building D. Pine Brook, New Jersey, United States 2. Sample Description ○ Product item : Smart Control ○ FCC ID : A3LVGTM2660 ○ Model name : VG-TM2660 ○ Variant Model Name : N/A ○ Manufacturer etc. : Samsung Electronics Co., Ltd. ○ Factory: 1. Samsung Electronics Co., Ltd. 2. REMOTE SOLUTION VIETNAM CO., LTD 3. PT Samjin 4. SAMJIN THAI CO., LTD. 3. Date of test : 2025.10.18 4. Location of Test :  Permanent Testing Lab  On Site Testing ○ Address : 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea 5. Test method used : CFR §2.1093 6. Test result : PASS The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This laboratory is not accredited for the test results marked *. This test report is not related to KOLAS accreditation. Affirmation Tested by Technical Manager Name : Min-sup, Kim (Signature) Name : Wi-han, Jeong (Signature) 2025 . 10. 24. KES Co., Ltd. Accredited by KOLAS, Republic of KOREA Report No. : KES-SR250226 Page 2 / 58 KES-QP16-F01(00-23-01-01) KES Co., Ltd. The authenticity of the test report, contact [email protected] REPORT REVISION HISTORY Date Test Report No. Revision History 2025.10.24 KES-SR250226 Initial This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. This document may be altered or revised by KES Co., Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by KES Co., Ltd. will constitute fraud and shall nullify the document. Use of uncertainty of measurement for decisions on conformity (decision rule): ☐ No decision rule is specified by the standard, when comparing the measurement result with the applicable limit according to the specification in that standard. The decisions on conformity are made without applying the measurement uncertainty(“simple acceptance” decision rule, previously known as “accuracy method”). ■ Other (to be specified, for example when required by the standard or client) Report No. : KES-SR250226 Page 3 / 58 KES-QP16-F01(00-23-01-01) KES Co., Ltd. The authenticity of the test report, contact [email protected] TABLE OF CONTENTS 1. General Information ....................................................................................................................................... 4 1.1. Highest SAR Summary ........................................................................................................................... 4 1.2. Device Overview ..................................................................................................................................... 4 1.3. Power Reduction for SAR ....................................................................................................................... 4 1.4. Nominal and Maximum Output Power Specifications ............................................................................ 5 1.5. Simultaneous Transmission Capabilities ................................................................................................ 5 1.6. DUT Antenna Locations .......................................................................................................................... 5 1.7. Near Field Communications (NFC) Antenna .......................................................................................... 5 1.8. Guidance Applied .................................................................................................................................... 6 1.9. Device Serial Numbers ........................................................................................................................... 6 2. Introduction ............................................................................................................................................. 7 2.1. SAR definition ......................................................................................................................................... 7 2.2. SAR Measurement Setup ....................................................................................................................... 8 3. Dosimetric Assessment .......................................................................................................................... 9 4. TEST CONFIGURATION POSITIONS ................................................................................................. 10 4.1. Device Holder ....................................................................................................................................... 10 4.2. Positioning for Testing ........................................................................................................................... 10 5. RF Exposure Limits ............................................................................................................................... 11 5.1. Uncontrolled Environment ..................................................................................................................... 11 5.2. Controlled Environment ......................................................................................................................... 11 6. FCC Measurement Procedures ............................................................................................................ 12 6.1. Measured and Reported SAR............................................................................................................... 12 6.2. Procedures Used to Establish RF signal for SAR ................................................................................…

Text truncated - open the document above for the full version.

TEST REPORT CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 REPORT No.: CTK-2025-02914 Page (1) / (33) Pages [QF-QP15-03] Ver.03 Project Number: CTK-K-2025-05065 1. Applicant ◦ Name : Samsung Electronics Co., Ltd. ◦ Address : 19 Chapin Rd, Building D. Pine Brook, New Jersey, United States ◦ Date of Receipt : 2025-09-24 2. Manufacturer ◦ Name : Samsung Electronics Co., Ltd. ◦ Address : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Republic of Korea 3. Factory ◦ Name #1 : Samsung Electronics Co., Ltd. ◦ Address #1 : 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Republic of Korea ◦ Name #2 : REMOTE SOLUTION VIETNAM CO., LTD ◦ Address #2 : Lot D-5H-CN, My Phuoc 3 Industrial Park, Thoi Hoa Ward, Ben Cat Town, Binh Duong Province, Vietnam ◦ Name #3 : PT Samjin ◦ Address #3 : Bekasi International Industrial Estate, JI.Inti Raya Blok C 2 No.10 Desa Sukaresmi Kec. Cikarang Selatan, Kab. Bekasi, Provinsi Jawa Barat, 17530, Indonesia ◦ Name #4 : SAMJIN THAI CO., LTD. ◦ Address #4 : 180/4 M.3, T.Bueng, A.Sriracha, Chonburi 20230 Thailand 4. Use of Report : For FCC Certification 5. Test Sample / Model : Smart Control / VG-TM2660 6. Date of Test : 2025-10-14 to 2025-10-21 7. Test Standard(method) used : FCC 47 CFR part 15 subpart C 15.247 ISED RSS-247 & RSS-Gen 8. Testing Environment : refer to 8 page 9. Test Results : Compliance 10. Location of Test : Permanent Testing Lab On Site Testing (Address : (Unhak-Dong) 5, Dongbu-ro 221beon-gil, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This report cannot be reproduced or copied without the written consent of CTK. CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 REPORT No.: CTK-2025-02914 Page (2) / (33) Pages [QF-QP15-03] Ver.03 Project Number: CTK-K-2025-05065 Approval Tested by: Nam-hyoung Kwon: (Signature) Technical Manager: Young-taek Lee: (Signature) 2025-10-23 CTK Co., Ltd. CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 REPORT No.: CTK-2025-02914 Page (3) / (33) Pages [QF-QP15-03] Ver.03 Project Number: CTK-K-2025-05065 REPORT REVISION HISTORY Date Revision Page No 2025-10-23 Issued (CTK-2025-02914) all This report shall not be reproduced except in full, without the written approval of CTK Co., Ltd. This document may be altered or revised by CTK Co., Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by CTK Co., Ltd. will constitute fraud and shall nullify the document. CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 REPORT No.: CTK-2025-02914 Page (4) / (33) Pages [QF-QP15-03] Ver.03 Project Number: CTK-K-2025-05065 CONTENTS 1. General Product Description ........................................................................................ 5 1.1 Applicant Information ......................................................................................... 5 1.2 Product Information ............................................................................................ 5 1.3 Peripheral Devices .............................................................................................. 5 1.4 Model Differences ............................................................................................... 5 2. Accreditations ........................................................................................................... 6 2.1 Laboratory Accreditations and Listings .................................................................. 6 2.2 Calibration Details of Equipment used for Measurement .......................................... 6 3. Test Specifications ..................................................................................................... 7 3.1 Standards.......................................................................................................... 7 3.2 Testing Environment ........................................................................................... 8 3.3 Mode of Operation during the Test ........................................................................ 8 3.4 Device Modifications ........................................................................................... 8 3.5 Measurement Uncertainty .................................................................................... 9 3.6 Test Software ..................................................................................................... 9 4. Technical Characteristic Test ...................................................................................... 10 4.1 6 dB Bandwidth ................................................................................................ 10 4.2 Maximum Peak Conducted Output Power ............................................................. 12 4.3 Transmitter Power Spectral Density..................................................................... 14 4.4 Conducted Spurious Emission ............................................................................ 16 4.5 Radiated Emission ............................................................................................ 19 4.6 AC Conducted Emissions ................................................................................... 30 APPENDIX A – Test Equipment Used For Tests ................................................................. 33 CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 REPORT No.: CTK-2025-02914 Page (5) / (33) Pages [QF-QP15-03] Ver.03 Project Number: CTK-K-2025-05065 1. General Product Description 1.1 Applicant Information Company Samsu…

Text truncated - open the document above for the full version.

UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± SCALE： ----- UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：彭少君 CHECKED BY：洪賢修 DESIGNED BY：彭少君 APPROVED BY：謝立庭 TITLE：ACA-3216-A1-CC-S-W1 Specification DOCUMENT ENS000211800 SPEC REV. NO. A0 PAGE 1 OF 8 - 1 - ACA-3216-A1-CC-S-W1 Specification 1. Features and Application： This product is for WiFi/BT band 2. Explanation of Part Number： AC A - 3216 - A1 - CC - S - W1 (1) (2) (3) (4) (5) (6) (7) (1) Product Type：Chip Antenna (2) Center Frequency/Band Code：2.4 GHz Band (3) Size Code：3.2*1.6 mm (Length * Width) (4) Design Revision Code：Rev.1 (5) Antenna Type：Coupling Ceramics (6) Special Code：RoHS Compliant (7) Suffix For Special Requirements 3. Electrical Specification： Item Specification Frequency Band 2400 ~ 2500 MHz Polarization Linear Impedance 50 ohm Typ. VSWR Less than 2.5 *Peak Gain 0.97 dBi Typ. *Peak Efficiency 71.1 % Typ. * Test condition：Test board size 100*50 mm Matching circuit may be required UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± SCALE： ----- UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：彭少君 CHECKED BY：洪賢修 DESIGNED BY：彭少君 APPROVED BY：謝立庭 TITLE：ACA-3216-A1-CC-S-W1 Specification DOCUMENT ENS000211800 SPEC REV. NO. A0 PAGE 2 OF 8 - 2 - 4. Physical Dimension： Top view Bottom view Side view L 3.20 ± 0.30 W 1.70 ± 0.20 H 0.50 ± 0.10 A 0.30 ± 0.15 B 0.30 ± 0.15 L1 0.47 ± 0.20 W1 0.70 ± 0.20 (Unit：mm) 5. Recommended PCB Layout： Layout H B A L W L1 W1 2.4 GHz Pad (GND) Pad (Feed) Feed Line (50 ohm) Pad (GND) Clearnace Area (6.5*5 mm) Ground UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± SCALE： ----- UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：彭少君 CHECKED BY：洪賢修 DESIGNED BY：彭少君 APPROVED BY：謝立庭 TITLE：ACA-3216-A1-CC-S-W1 Specification DOCUMENT ENS000211800 SPEC REV. NO. A0 PAGE 3 OF 8 - 3 - Pad Dimensions on PCB Layout Top View Perspective View (Unit：mm) * Tolerance：±0.05 mm UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± SCALE： ----- UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：彭少君 CHECKED BY：洪賢修 DESIGNED BY：彭少君 APPROVED BY：謝立庭 TITLE：ACA-3216-A1-CC-S-W1 Specification DOCUMENT ENS000211800 SPEC REV. NO. A0 PAGE 4 OF 8 - 4 - 6. Electrical Characteristics： VSWR Frequency (MHz) VSWR 2400 1.94 2450 1.40 2500 1.98 Radiation Pattern： The Gain pattern is measured in INPAQ’s FAR-field chamber. DUT is placed on the table of rotator, a standard horn antenna and Vector Network Analyzer is used to collect data. 3D Far Field Chamber Double Ridge Horn Antenna Antenna Under Test (AUT) PC Rotator Controller Agilent 8960 Series 10 (E5515C) 3D Chamber Definition UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± SCALE： ----- UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：彭少君 CHECKED BY：洪賢修 DESIGNED BY：彭少君 APPROVED BY：謝立庭 TITLE：ACA-3216-A1-CC-S-W1 Specification DOCUMENT ENS000211800 SPEC REV. NO. A0 PAGE 5 OF 8 - 5 - 3D Gain Pattern 2450 MHz Resp o n se (d B) -35 5 -25 -15 -5 Z Y X Azim uth = 100.0 Elevation = -30.0 Roll = -70.0 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± SCALE： ----- UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：彭少君 CHECKED BY：洪賢修 DESIGNED BY：彭少君 APPROVED BY：謝立庭 TITLE：ACA-3216-A1-CC-S-W1 Specification DOCUMENT ENS000211800 SPEC REV. NO. A0 PAGE 6 OF 8 - 6 - 7. Taping Package and Label Marking： (1) Quantity：4000pcs/Reel, T(Thickness of chip)≦1.2 (2) Paper Tape Type W A B K t F P 3216 8±0.1 1.9~2.1 3.50~3.60 Max. 1.40 0.22±0.05 3.50±0.1 4.00±0.1 (Unit: mm) (3) Tape Packing (4) Cover Tape Reel Off Force (5) Reel Dimensions (Unit: mm) W A B 9±0.5 178±1 13+0.5/-0.2 11.4±0.5 178±1 13+0.5/-0.2 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± SCALE： ----- UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：彭少君 CHECKED BY：洪賢修 DESIGNED BY：彭少君 APPROVED BY：謝立庭 TITLE：ACA-3216-A1-CC-S-W1 Specification DOCUMENT ENS000211800 SPEC REV. NO. A0 PAGE 7 OF 8 - 7 - 8. Environmental Characteristics： (1) Reliability Test Item Condition Specification Thermal shock 1. 30±3 minutes at -40°C±5°C, 2. Convert to +105°C (5 minutes) 3. 30±3 minutes at +105°C±5°C, 4. Convert to -40°C (5 minutes) 5. Total 100 continuous cycles No apparent damage Fulfill the electrical spec. after test. Humidity resistance 1. Humidity：85% R.H. 2. Temperature：85±5°C 3. Time：1000 hours. No apparent damage Fulfill the electrical spec. after test. High temperature resistance 1. Temperature：150°C±5°C 2. Time：1000 hours. No apparent damage Fulfill the electrical spec. after test. Low temperature resistance 1. Temperature：-40°C±5°C 2. Time：1000 hours. No apparent damage Fulfill th…

Text truncated - open the document above for the full version.