A4C-10012BGPS Device

Quick Start Guide Support Find the full User Manual and more at randmcnally.com/support 877-446-4863 TND-TABLET1050-033022 - vs 002 Randtab 7 1 Box Contents 1 10-inch truck navigation device with camera 2 Powered magnetic mount connector Three mounts: 3 Screw down mount 4 Suction Cup Mount 5 Ball mount bracket 6 Removable guard 7 Vehicle charger (5V/5A) 8 USB-C cable 9 Anti-glare screen protector 10 Quick Start Guide Your Randtab 7 Home Camera Volume DownUpPower Antenna Port (Antenna sold separately) micro SD card slot Reset Audio out Micro HDMI USB-C 1 2 3 5 4 6 78 9 10 23 Powering Up Charge the device before using it on battery power. Note: GPS navigation will work right out of the box even if you do not have internet access. Connecting to Wi-Fi When you first turn on your tablet, you’ll be asked to select a Wi-Fi network to connect to the internet. A Wi-Fi connection is required to browse the web, download apps, and use internet- enabled features such as weather and traffic. Choose your wireless access point or hotspot from the list and type in your password. You can come back to this step later if you are in a place without internet access. Warning: When using the magnetic mount in your vehicle, only use the mount’s DC IN port for charging. Do not attempt to simultaneously charge the tablet from the magnetic mount and the tablet’s USB port. Registration In the next step, you’ll be prompted to register your tablet with Rand McNally. Your registration ensures that you have access to the latest information and updates, as well as Customer Support. Getting Started Mounting Options We have provided three mounting options so that you can put the navigation device in the safest, most convenient part of your vehicle: 1 Screw down mount (typically installed on dashboard) 2 Suction cup mount (installed on flat surfaces like windshields) 3 Ball mount bracket for use with third-party mounts 1 2 3 45 M ounting the Randtab 7 Option 2: Suction Cup Mount Note: Follow all local regulations governing the placement of the mount. 1. Select an area with a line of sight to the sky and GPS satellites. 2. Clean and dry the mounting area. 3. Remove the suction cup protective film. 4. Adjust the angle of the mount. 5. Pull the suction cup lever up to release suction. 6. Plug the power cord into the mount and the vehicle’s 12-volt power source. 7. Place and hold the mount suction cup against the mounting surface. 8. Press the suction cup lever down until it snaps into place. 9. Snap the tablet onto the mount (using built-in magnet). M ounting the Randtab 7 Option 1: Screw Down Mount Notes: •Rand McNally recommends professional installation for this mounting option and is not responsible for any damages or consequences arising from the installation. •Avoid gauges, HVAC, air bags, air bag covers and other items when drilling holes and attaching the mount to the vehicle. •You need to furnish your own screws. •This mount also includes an adhesive option. 1. Select an area with a line of sight to the sky and GPS satellites. 2. Clean and dry the mounting area. 3. Using the mount as a template, mark the three screw locations. 4. Drill pilot holes (optional). 5. Secure the mount in place with screws that you furnish. 6. Adjust the angle of the mount. 7. Plug the power cord into the mount and the vehicle’s 12-volt power source. 8. Snap the tablet onto the mount (using built-in magnet). 67 M ounting the Randtab 7 Option 3: Ball Mount Bracket The 1050 includes a ball mount that is compatible with third party mounting solutions. 1. Secure the ball mount to the magnetic mount using the screws included in the package. Note that the screws in the package might look slightly different than the screws in these images. 2. Snap the tablet on the mount (using built-in magnet). 89 Android User Interface 1 Bluetooth ® 2 Wi-Fi 3 Battery Meter and Charging Indicator 4 Current Time 5 Back 6 Return to Home Screen 7 View Open Apps Note: You can swipe down from the top of the screen to view the Android quick settings menu. Android User Interface 2 31 4 657 1011 Main Menu 1 Rand Navigation 2 Driver Apps (HOS/ELD) 3 Truck Tools 4 Cameras 5 Gallery 6 Guided Search 7 Settings 8 App Tray Rand Navigation 1 Route to a location. 2 Battery power status and charging indicator. 3 Select map view mode: Heading up, North up or 3D view. 4 Wi-Fi connected services. 5 Zoom in/out. 6 Return to current location. 7 Virtual dashboard. 8 Current street name, upcoming intersection, or current location. 9 Local time and Elevation. 10 Navigation Settings: General, Truck Info, Route, Map and Warnings. 11 Hide/display screen information and controls. 1 5 6 6 91011 7 7 8 8 3 2 4 12 345 1213 Rand Navigation > Destination 1 Route to a searched location. Tips: •Search for addresses, streets, cities and points of interest. •Address searches should include either a city or postal code. •Avoid using punctuations. •Avoid using street prefixes and suffixes. 2 Go to Map. 3 Route to a New location. 4 Plan a multi-stop trip or record a trail. 5 Return to a previous location. 6 Access the Address book. 7 Route to a Point of Interest (POI). 8 Add Home location. 9 Add Work location. Rand Navigation > Truck Info and Warnings 1.Tap Settings. 2.Tap Truck Info or Warnings tab. 3. Scroll to view options. 4. Tap the option to be changed. 5. Enter new settings. 6.Tap to save changes. 1 3 2 456 789 On the left, tap on an option On the right, enter settings for the option Rand Navigation > Preferences 1.Tap Settings. 2. Tap the General, Route or Map tab. 3. Scroll to view options. 4. Tap the option to be changed. 5. Enter new settings. 6.Tap to save changes. On the left, tap on an option On the right, enter settings for the option 1415 Rand Navigation > New Location 1.Tap Where to? > Guided Search > New location. 2.Tap Address. 3. Enter the name of the city. (Note: As you type, the keyboard only displays the next possible letter.) 4. Results appear in the list. Tap the city to select. 5…

Text truncated - open the document above for the full version.

RM Acquisition LLC. 07‐14‐2023 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID:A4C‐10012B) [ RM Acquisition LLC.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Kristalyn Wilkerson RM Acquisition LLC. 07‐14‐2023 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: A4C‐10012B) [RM Acquisition LLC.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Kristalyn Wilkerson

Attestation Statements (2023.07.19) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID: A4C‐10012B) (RM Acquisition LLC.) , the undersigned, hereby authorize (RM Acquisition LLC.) to act as our designated U.S. agent for service of process, (RM Acquisition LLC.) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission‐related proceeding involving the equipment. (RM Acquisition LLC.) accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission‐related proceeding involving the equipment. Applicant Information： Company name: RM Acquisition LLC. Contact Name: Kristalyn Wilkerson Address: 8770 W. Bryn Mawr Avenue,Chicago,Illinois,United States,60631 Telephone No: 8473296590 Email: 8473296101 FRN: 0020219580 U.S. Agent Information: Company name: RM Acquisition LLC. Contact Name: Kristalyn Wilkerson Address: 8770 W. Bryn Mawr Avenue,Chicago,Illinois,United States,60631 Telephone No: 8473296590 Email: 8473296101 FRN: 0020219580 Applicant Signature: Agent Signature: (if the agent is different from the applicant) Applicant printed name: Kristalyn Wilkerson Agent printed name:

RM Acquisition LLC. Agent Authorization Letter 2023-07-19 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen Most Technology Service Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name: Kristalyn Wilkerson Position: CFO Company Name: RM Acquisition LLC. Address: 8770 W. Bryn Mawr Avenue,Chicago,Illinois,United States,60631 Tel / Fax 8473296590 / 8473296101 E-Mail: [email protected]

RM Acquisition LLC. Long Term Confidentiality Request Letter 2023-07-19 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR (FCC ID: A4C-10012B) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - e.g. Block diagram - e.g. SCH - e.g. Operational Description - e.g.Software Security information required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Name: Kristalyn Wilkerson Position: CFO Company Name: RM Acquisition LLC. Address: 8770 W. Bryn Mawr Avenue,Chicago,Illinois,United States,60631 Tel / Fax 8473296590 / 8473296101 E-Mail: [email protected]

Model No.: RandTab7 FRONT VIEW OF SAMPLE BACK VIEW OF SAMPLE Model No.: RandTab7 LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE Model No.: RandTab7 TOP VIEW OF SAMPLE BOTTOM VIEW OF SAMPLE Model No.: RandTab7

Label: Size:20mm*50mm Label location

Model No.: RandTab7 Page 1 of 3 INTERNAL PHOTO OF SAMPLE INTERNAL PHOTO OF SAMPLE PCB BT/WIFI Antenna Model No.: RandTab7 Page 2 of 3 INTERNAL PHOTO OF SAMPLE PCB INTERNAL PHOTO OF SAMPLE PCB Model No.: RandTab7 Page 3 of 3 INTERNAL PHOTO OF SAMPLE PCB

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 52 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China SARTestReport For ApplicantName:RMACQUISITIONSLLC Address:8725WestHigginsRoadSuite900Chicago,Illinois60631 EUTName:GPSDevice BrandName: RANDM c ． NALLY ModelNumber:Randtab7 IssuedBy CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber:BTF230627R00401 TestStandards: 47CFRPart2.1093IEEE1528-2013IEEEC95.1-2019 KDB447498D01KDB865664D01KDB865664D02 KDB248227D01KDB616217D04KDB690783D01 FCCID:A4C-10012B TestConclusion:Pass TestDate:2023-07-03 DateofIssue:2023-07-04 PreparedBy: MonicaZhou/ProjectEngineer Date:2023-07-04 ApprovedBy: Ryan.CJ/EMCManager Date:2023-07-04 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF230627R00401 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 52 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02023-07-04Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF230627R00401 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 52 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China TableofContents 1.Introduction.................................................................................................................................................................................................4 1.1IdentificationofTestingLaboratory..............................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation....................................................................................................................4 1.3LaboratoryCondition......................................................................................................................................................................4 1.4Announcement.................................................................................................................................................................................4 2.ProductInformation...................................................................................................................................................................................5 2.1ApplicationInformation...................................................................................................................................................................5 2.2ManufacturerInformation...............................................................................................................................................................5 2.3FactoryInformation.........................................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT)................................................................................................................5 2.5EquipmentunderTestAncillaryEquipment................................................................................................................................5 2.6TechnicalInformation.....................................................................................................................................................................5 3.SummaryofTestResults.........................................................................................................................................................................6 3.1TestStandards................................................................................................................................................................................6 3.2DeviceCategoryandSARLimit...................................................................................................................................................7 3.3TestResultSummary.....................................................................................................................................................................7 3.4TestUncertainty..............................................................................................................................................................................8 4.MeasurementSystem.............................................................................................................................................................................10 4.1SpecificAbsorptionRate(SAR)Definition................................................................................................................................10 4.2MVGSARSystem.........................................................................................................................................................................10 5.SystemVerification..................................................................................................................................................................................14 5.1PurposeofSystemCheck.....................................................................…

Text truncated - open the document above for the full version.

Shenzhen Most Technology Service Co., Ltd. No.5, 2nd Langshan Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China. FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID............................................. : MTEB23070004-R2 A4C-10012B Compiled by ( position+printed name+signature) . : File administrators Alisa Luo Supervised by ( position+printed name+signature) . : Test Engineer Sunny Deng Approved by ( position+printed name+signature) . : Manager Yvette Zhou Date of issue .................................... : Jul.03,2023 Representative Laboratory Name . : Shenzhen Most Technology Service Co., Ltd. Address ............................................ : No.5, 2nd Langshan Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China. Applicant’s name ............................ : RM ACQUISITIONS LLC Address ............................................ : 8770 W. Bryn Mawr Avenue,Chicago,Illinois,United States,60631 Test specification ........................... : Standard ........................................... : FCC Part 15.247 TRF Originator .................................. : Shenzhen Most Technology Service Co., Ltd. Shenzhen Most Technology Service Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Most Technology Service Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Most Technology Service Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : GPS Device Trade Mark ....................................... : Manufacturer .................................... : SHEN ZHEN APICAL TECHNOLOGY CO., LTD Model/Type reference ...................... : RandTab7 Listed Models .................................. : N/A Modulation Type ............................... : CCK/DSSS/ OFDM Operation Frequency ........................ : From 2412 - 2462MHz Rating ............................................... : DC 3.7V (by Battery) DC 5V (by USB Port) DC 5V (by Car Charger) Hardware version ............................. : T1050-MT8176-MAIN-01B Software version .............................. : RandTab7_mp Result ............................................... : PASS Report No.: MTEB23070004-R2 Page 2 of 52 T E S T R E P O R T Equipment under Test : GPS Device Model /Type : RandTab7 Listed Models : N/A Remark N/A. Applicant : RM ACQUISITIONS LLC Address : 8770 W. Bryn Mawr Avenue,Chicago,Illinois,United States,60631 Manufacturer : SHEN ZHEN APICAL TECHNOLOGY CO., LTD Address : 9/F,B Building, Tinghua Unis Infoport, Langshan RD, North district, Hi-tech Industrial Park, Nanshan, Shenzhen Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: MTEB23070004-R2 Page 3 of 52 Contents 1 REVISION HISTORY ................................................................ 4 2 TEST STANDARDS .................................................................. 5 3 SUMMARY ............................................................................. 6 3.1 General Remarks 6 3.2 Product Description 6 3.3 Equipment Under Test 6 3.4 Short description of the Equipment under Test (EUT) 6 3.5 EUT operation mode 6 3.6 Block Diagram of Test Setup 7 3.7 Test Item (Equipment Under Test) Description* 7 3.8 Auxiliary Equipment (AE) Description 7 3.9 Antenna Information* 7 3.10 Related Submittal(s) / Grant (s) 7 3.11 Modifications 8 3.12 EUT configuration 8 4 TEST ENVIRONMENT ............................................................... 9 4.1 Address of the test laboratory 9 4.2 Test Facility 9 4.3 Environmental conditions 9 4.4 Test Description 10 4.5 Statement of the measurement uncertainty 10 4.6 Equipments Used during the Test 11 5 TEST CONDITIONS AND RESULTS ............................................ 12 5.1 AC Power Conducted Emission 12 5.2 Radiated Emission 15 5.3 Maximum Conducted Output Power 22 5.4 Power Spectral Density 23 5.5 6dB Bandwidth 24 5.6 Out-of-band Emissions 25 5.7 Duty Cycle Information 26 5.8 Antenna Requirement 27 6 TEST SETUP PHOTOS OF THE EUT .......................................... 28 7 PHOTOS OF THE EUT ............................................................. 29 APPENDIX I.Conducted Peak Output Power 30 APPENDIX II.99% Bandwidth 31 APPENDIX III.6dB Bandwidth 34 APPENDIX IV.Conducted Out Of Band Emission 37 APPENDIX V.Duty Cycle 43 APPENDIX VI.Power Spectral Density 50 Report No.: MTEB23070004-R2 Page 4 of 52 1 Revision History Revision Issue Date Revisions Revised By 00 2023-07-03 Initial Issue Alisa Luo Report No.: MTEB23070004-R2 Page 5 of 52 2 TEST STANDARDS The tests were performed according to following standards: FCC Rules Part 15.247 : Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2013 : American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 v05r02: Guidance for Compliance Measurements on Digital Transmission Systems (DTS) ,Frequency Hopping Spread Spectrum System(HFSS), and Hybrid System Devices Operating Under §15.247 of The FCC rules. Report No.: MTEB23070004-R2 Page 6 of 52 3 SUMMARY 3.1 General Remarks Date of receipt of test sample : 2023.06.19 Testing commenced on : 2023.06.20 Testing concluded on : 2023.07.03 3.2 Product Description Product Name: GPS Device Model/Type reference: RandTab7 Power Supply： DC 3.7V (by Battery) DC 5V (by USB Port) DC 5V (by Car Charger) Testing sample ID： MTYP01540 WIFI : Supported type: 802.11b/802.11g/802.11n(H20)/802.11n(H40) Modulation: 802.11b: DSSS 802.11g/802.11n(H2…

Text truncated - open the document above for the full version.

Tolerances(Unlessotherwisespecified) UnictronTechnologiesCorporation Website:www.unictron.com X:±1X.X:±0.1X.XX:±0.01 Angle:±HoleDia.:± Scale:Unit：mm THISSPECIFICATIONISTHEPROPERTYOFUNICTRON TECHNOLOGIESCORPORATIONANDSHALLNOTBEREPRODUCED ORUSEDINALLCIRCUMSTANCESWITHOUTWRITTEN PERMISSION PreparedBy:ShelleyCheckedByJoy ApprovedBy:Frank TITLE：25.0x6.0x0.5(mm)WiFiDualBandPCBAntenna withCable(P2507-00)Engineering Specification PART S2B1BC5A1B01001 REV. NO.A PAGE 1 OF12 25.0x6.0x0.5(mm)WiFiDualBandPCBAntennawithCable （P2507-00）EngineeringSpecification 1. ExplanationofProductNumber ProductCode: (1)Application: B:WiFi/BTantenna (2)Dimensions: C5:25x6.0x0.5 (3)Material: F:FPC (4)WorkingFrequencies 1B:2400~2500&4900~5900MHz (5)AntennaSeries: 01:serialnumber Tolerances(Unlessotherwisespecified) UnictronTechnologiesCorporation Website:www.unictron.com X:±1X.X:±0.1X.XX:±0.01 Angle:±HoleDia.:± Scale:Unit：mm THISSPECIFICATIONISTHEPROPERTYOFUNICTRON TECHNOLOGIESCORPORATIONANDSHALLNOTBEREPRODUCED ORUSEDINALLCIRCUMSTANCESWITHOUTWRITTEN PERMISSION PreparedBy:ShelleyCheckedByJoy ApprovedBy:Frank TITLE：25.0x6.0x0.5(mm)WiFiDualBandPCBAntenna withCable(P2507-00)Engineering Specification PART S2B1BC5A1B01001 REV. NO.A PAGE 2 OF12 2. Features *Stableandreliableinperformances *Compactsize *RoHScompliance 3.Applications *IEEE802.11(a/b/g/n/ac). *Hand-helddeviceswhenWiFi/BT(802.11a/b/g/n/ac)functionsareneeded. 4.Description Unictron’sFPCantennawithcableseriesarespeciallydesignedfor IEEE802.11(a/b/g/n/ac)applications.BasedonUnictron’sproprietarydesignand processes,thisantennahasexcellentstabilityandsensitivitytoconsistentlyprovide highsignalreceptionefficiency. 5. ElectricalSpecifications 5-1.ElectricalTable(2400~2500MHzBand) CharacteristicsSpecificationsUnit OutlineDimensions25x6.0x0.5mm CenterFrequency2400~2500MHz Bandwidth90min.MHz VSWR2max. Impedance50  PolarizationLinearPolarization Gain* Peak0.9(typical)dBi Efficiency56(typical) % Tolerances(Unlessotherwisespecified) UnictronTechnologiesCorporation Website:www.unictron.com X:±1X.X:±0.1X.XX:±0.01 Angle:±HoleDia.:± Scale:Unit：mm THISSPECIFICATIONISTHEPROPERTYOFUNICTRON TECHNOLOGIESCORPORATIONANDSHALLNOTBEREPRODUCED ORUSEDINALLCIRCUMSTANCESWITHOUTWRITTEN PERMISSION PreparedBy:ShelleyCheckedByJoy ApprovedBy:Frank TITLE：25.0x6.0x0.5(mm)WiFiDualBandPCBAntenna withCable(P2507-00)Engineering Specification PART S2B1BC5A1B01001 REV. NO.A PAGE 3 OF12 5-2.4900~5900MHzBand CharacteristicsSpecificationsUnit CenterFrequency4900~5900MHz Bandwidth90min.MHz VSWR2max. Impedance50  PolarizationLinearPolarization Gain* Peak2.9(typical)dBi Efficiency68(typical) % 6. ReturnLoss&VSWR ReturnLoss(S 11 )VSWR(S 11 ) Tolerances(Unlessotherwisespecified) UnictronTechnologiesCorporation Website:www.unictron.com X:±1X.X:±0.1X.XX:±0.01 Angle:±HoleDia.:± Scale:Unit：mm THISSPECIFICATIONISTHEPROPERTYOFUNICTRON TECHNOLOGIESCORPORATIONANDSHALLNOTBEREPRODUCED ORUSEDINALLCIRCUMSTANCESWITHOUTWRITTEN PERMISSION PreparedBy:ShelleyCheckedByJoy ApprovedBy:Frank TITLE：25.0x6.0x0.5(mm)WiFiDualBandPCBAntenna withCable(P2507-00)Engineering Specification PART S2B1BC5A1B01001 REV. NO.A PAGE 4 OF12 7. AntennaDimensions(unit:mm). Tolerances(Unlessotherwisespecified) UnictronTechnologiesCorporation Website:www.unictron.com X:±1X.X:±0.1X.XX:±0.01 Angle:±HoleDia.:± Scale:Unit：mm THISSPECIFICATIONISTHEPROPERTYOFUNICTRON TECHNOLOGIESCORPORATIONANDSHALLNOTBEREPRODUCED ORUSEDINALLCIRCUMSTANCESWITHOUTWRITTEN PERMISSION PreparedBy:ShelleyCheckedByJoy ApprovedBy:Frank TITLE：25.0x6.0x0.5(mm)WiFiDualBandPCBAntenna withCable(P2507-00)Engineering Specification PART S2B1BC5A1B01001 REV. NO.A PAGE 5 OF12 8. RadiationPattern 8-1.2400~2500MHzBand 8-1-1.3DGainPattern@2442MHz(unit:dBi) Tolerances(Unlessotherwisespecified) UnictronTechnologiesCorporation Website:www.unictron.com X:±1X.X:±0.1X.XX:±0.01 Angle:±HoleDia.:± Scale:Unit：mm THISSPECIFICATIONISTHEPROPERTYOFUNICTRON TECHNOLOGIESCORPORATIONANDSHALLNOTBEREPRODUCED ORUSEDINALLCIRCUMSTANCESWITHOUTWRITTEN PERMISSION PreparedBy:ShelleyCheckedByJoy ApprovedBy:Frank TITLE：25.0x6.0x0.5(mm)WiFiDualBandPCBAntenna withCable(P2507-00)Engineering Specification PART S2B1BC5A1B01001 REV. NO.A PAGE 6 OF12 8-2.3DGainPattern@4900MHz(unit:dBi) Tolerances(Unlessotherwisespecified) UnictronTechnologiesCorporation Website:www.unictron.com X:±1X.X:±0.1X.XX:±0.01 Angle:±HoleDia.:± Scale:Unit：mm THISSPECIFICATIONISTHEPROPERTYOFUNICTRON TECHNOLOGIESCORPORATIONANDSHALLNOTBEREPRODUCED ORUSEDINALLCIRCUMSTANCESWITHOUTWRITTEN PERMISSION PreparedBy:ShelleyCheckedByJoy ApprovedBy:Frank TITLE：25.0x6.0x0.5(mm)WiFiDualBandPCBAntenna withCable(P2507-00)Engineering Specification PART S2B1BC5A1B01001 REV. NO.A PAGE 7 OF12 8-2-2.3DGainPattern@5150MHz(unit:dBi) Tolerances(Unlessotherwisespecified) UnictronTechnologiesCorporation Website:www.unictron.com X:±1X.X:±0.1X.XX:±0.01 Angle:±HoleDia.:± Scale:Unit：mm THISSPECIFICATIONISTHEPROPERTYOFUNICTRON TECHNOLOGIESCORPORATIONANDSHALLNOTBEREPRODUCED ORUSEDINALLCIRCUMSTANCESWITHOUTWRITTEN PERMISSION PreparedBy:ShelleyCheckedByJoy ApprovedBy:Frank TITLE：25.0x6.0x0.5(mm)WiFiDualBandPCBAntenna withCable(P2507-00)Engineering Specification PART S2B1BC5A1B01001 REV. NO.A PAGE 8 OF12 8-2-3.3DGainPattern@5500MHz(unit:dBi) Tolerances(Unlessotherwisespecified) UnictronTechnologiesCorporation Website:www.unictron.com X:±1X.X:±0.1X.XX:±0.01 Angle:±HoleDia.:± Scale:Unit：mm THISSPECIFICATIONISTHEPROPERTYOFUNICTRON TECHNOLOGIESCORPORATIONANDSHALLNOTBEREPRODUCED ORUSEDINALLCIRCUMSTANCESWITHOUTWRITTEN PERMISSION PreparedBy:ShelleyCheckedByJoy ApprovedBy:Frank TITLE：25.0x6.0x0.5(mm)WiFiDualBandPCBAntenna withCable(P2507-00)Engineering Specification PART S2B1BC5A1B01001 REV. NO.A PAGE 9 OF12 8-2-4.3DGainPattern@5850MHz(unit:dBi) Tolerances(Unlessotherwisespecified) UnictronTechnologiesCorporation Website:www.unictron.com X:±1X.X:±0.1X.XX:±0.01 Angle:±HoleDia.:± Scale:Unit：mm THISSPECIFICATIONISTHEPROPERTYOFUNICTRON TECHNOLOGIESCORPORATIONANDSHALLNOTBEREPRODUCED ORUSEDINALLCIRCUMSTANCESWITHOU…

Text truncated - open the document above for the full version.

Model No.: RandTab7 CE TEST SETUP RE TEST SETUP Model No.: RandTab7 RE TEST SETUP