A7K-SIWAwox StriimLINK

User Manual Table of Contents 1.0 Introduction..............................................................1 2.0 Features...............................................................................1 3.0 Specification..............................................................1 4.0 Package Contents.....................................................2 5.0 Panel Descriptions..............................................................2 6.0 Network Connection..................................................4 7.0 The connection diagram.............................................4 8.0 The operation for Android mobile phone......................5 9.0 The operation for computer........................................7 Appendix:The difference of DLNA and Bluetooth Audio.....11 DLNA Audio Receiver DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, DLNA Audio Receiver please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. 1.0 Introduction Over this DLNA Audio Receiver, you can push your music wirelessly from your mobile phone or computer with Windows media player on your home audio system. You'll not only enjoy superior quality music on your stereo speakers or Amplifier Receiver, but also the convenience of a wireless connection. With WPS button, you can connect to network by pressing a pairing button on this Receiver and on wireless access point. It is ideal for your mobile phones, portable devices, or personal computers. 2.0 Features z Stream directly to an existing Stereo and Toslink port z Control and listen to your favorite music wirelessly using this product through home audio system. z Digital Media Renderer(DMR DLNA ) z Support Digital Media Player(DMC DLNA) z Support Media format: MP3 (up to 48 kHz, CBR & VBR) AAC (up to 48 kHz, 8-320 kbps) WMA (up to 48 kHz, CBR & VBR) including Lossless LPCM, WAV (up to 48 kHz, up to 1.44 Mb/s) z Support wire or wireless connection Wire:10/100Mbps Ethernet, RJ45 Wireless: high-performance 802.11b/g/n with WEP/WPA encryption, WPS 3.0 Specification Transmission protocol DLNA ,Digital Media Renderer(DMR) Network interface Wire:10/100Mbps Ethernet, RJ45 Wireless: high-performance802.11b/g/n with WEP/WPA encryption, WPS Audio output interface 3.5mm Stereo Toslink USB interface USB 2.0 A Female Mechanical Size(L-W-H) 125×95×25mm Weight(Net) 150g Environmental Operating Temperature 0 to +70 Operating Humidity 10% to 85 % RH (no condensation) Storage Temperature -10 to +80 DLNA Audio Receiver Storage Humidity 5% to 90 % RH (no condensation) Power Requirement External Power Supply 5V DC@ 2A Power consumption (Max) 1.65W Warranty Limited Warranty 1 Year Parts and Labor Accessories Adapter AC Power Adapter US standard, UK standard and so on User Manual English Version Note: Specifications are subject to change without notice. 4.0 Package Contents Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: z Main unit x1 z 5V/2A DC Power Supply. z User's Manual x1 5.0 Panel Descriptions 1. Ethernet Connection: The Ethernet connection gets priority than the Wi-Fi connection. If user starts the product with the Ethernet cable plugged, then the product will be connect to network through Ethernet. If the product has be connected in Wi-Fi, or in non-connected state, then plugging the Ethernet cable to the product will automatically launch the Ethernet DLNA Audio Receiver connection process. 2. Optical Output audio to Amplifier Receiver 3. USB Connect this port to USB storage device, and mobile phone can play the music from the USB storage device. 4. DC/5V Connect this port to the Power adapter. 5. Stereo Female: Connect this port to Stereo Speaker or Amplifier Receiver via one piece of stereo cable. 6. VOL- Decrease volume 7. VOL+ Increase volume 8. Mute 9. Reset 10. WLAN LED (monocolor red) OFF when the product is connected/connecting in Ethern et. Blinking while the product is connecting to Wi -Fi. Blinking when the product fail to connect to Wi -Fi (e.g., cannot get an IP address). Stable OFF after a configurable time (to show the ‘not connected state’) Stable ON when the device is successf ully connected 11. LAN LED (monocolor red) OFF when no Ethernet cable is connected OFF when the product is connected in Wi -Fi. Blinking while the product is connecting through Ethernet.. Blinking when the product fail to connect to Ethernet. (e.g., cannot get an IP address). Goes stable OFF after a configurable time (to show the ‘not connected state’) Stable ON when the device is successfully connected 12. Power LED (bicolor red/blue) Stable RED during boot. Stable BLUE after boot. Blinking BLUE during firmware upgrade. Blinking RED during factory reset. 13. WPS button (Wi-Fi connection) As of today, the Wi-Fi connection process can be launched only through WPS. 1. Press the WPS button of your access point 2. Press the WPS button of the product 3. The connection is successful once the Wi-Fi LED gets stable ON. Later on, once the access point mode will be available, user will be able to connect from an Android phone to this product and configure the Wi-Fi connection manually. DLNA Audio Receiver 6.0 Network Connection Before all operation start, please make sure all devices are connected to a network. When providing power to this product, it will take about 30 seconds to start this product. Ethernet connection The Ethernet connection gets priority than the Wi-Fi connection. If user starts the product with the Ethernet cable plugged, then the product will be connect to network through Ethernet. If the product has be connected in Wi-Fi, or in non-connected state, then plugging the Ethernet cable to the product will automatically launch the Ethernet connection process. Wi-Fi connection As of today, the Wi-Fi connection process can be launched only through WPS. 1. Press the WPS …

Text truncated - open the document above for the full version.

Awox Date: April 19, 2013 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: A7K-SIW To Whom It May Concern: This letter is to ascertain that Awox Awox StriimLINK MODEL No.: SI-W has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely, Cadiere JF / Program Manager E-mail: [email protected] Phone: +33 4 99 53 27 36 Fax: +33 4 67 47 10 15 Address: 93 Place Pierre Duhem, Montpellier, France

Awox Date: April 19, 2013 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: A7K-SIW To Whom It May Concern: This letter is to ascertain that Awox Awox StriimLINK MODEL No.: SI-W has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely, Cadiere JF / Program Manager E-mail: [email protected] Phone: +33 4 99 53 27 36 Fax: +33 4 67 47 10 15 Address: 93 Place Pierre Duhem, Montpellier, France

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 Awox April 19, 2013 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Awox hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): FCC ID: A7K-SIW (Awox StriimLINK MODEL No.: SI-W) We affirm that between SIEMIC and Awox SA, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Cadiere JF / Program Manager E-mail: [email protected] Phone: +33 4 99 53 27 36 Fax: +33 4 67 47 10 15 Address: 93 Place Pierre Duhem, Montpellier, France

Confidentiality Request Letter Awox (2013-04-19) To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality Request for FCC ID: A7K-SIW We hereby request confidential treatment of information accompanying this application as outlined below: - Block diagram - Operation description - Schematic The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Cadiere JF / Program Manager E-mail: [email protected] Phone: +33 4 99 53 27 36 Fax: +33 4 67 47 10 15 Address: 93 Place Pierre Duhem, Montpellier, France

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 Awox April 19, 2013 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Awox hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): FCC ID: A7K-SIW (Awox StriimLINK MODEL No.: SI-W) We affirm that between SIEMIC and Awox SA, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Cadiere JF / Program Manager E-mail: [email protected] Phone: +33 4 99 53 27 36 Fax: +33 4 67 47 10 15 Address: 93 Place Pierre Duhem, Montpellier, France

Confidentiality Request Letter Awox (2013-04-19) To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality Request for FCC ID: A7K-SIW We hereby request confidential treatment of information accompanying this application as outlined below: - Block diagram - Operation description - Schematic The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Cadiere JF / Program Manager E-mail: [email protected] Phone: +33 4 99 53 27 36 Fax: +33 4 67 47 10 15 Address: 93 Place Pierre Duhem, Montpellier, France

ID Label Awox StriimLINK FCC ID: A7K-SIW Trademark: Awox Model Number: SI-W Made in China

Label

ID Label Awox StriimLINK FCC ID: A7K-SIW Trademark: Awox Model Number: SI-W Made in China

Label

Antenna Wifi Mode

Antenna Wifi Mode

FCC ID : A7K-SIW RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure(MPE) Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) Average Time (A) Limits for Occupational/Control Exposures 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 (B) Limits for General Population/Uncontrol Exposures 300-1500 -- -- F/1500 6 1500-100000 -- -- 1 30 11.1 Friis transmission formula: Pd=(Pout*G)\(4*pi*R 2 ) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in mW G= Numeric gain of the antenna relative to isotropic antenna Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm 2 . If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. 11.2 Measurement Result Antenna gain: 3.79dBi 801.11b Channel Channel Frequency (MHz) Output Peak power (dBm) Output Peak power (mW) Antenna Gain (dBi) Numeric Power density at 20cm (mW/ cm 2 ) Power density Limits (mW/cm 2 ) 1 2412 14.52 28.31 2.39 0.0135 1 6 2437 14.2 26.30 2.39 0.0125 1 11 2462 13.95 24.83 2.39 0.0118 1 801.11g Channel Channel Frequency (MHz) Output Peak power (dBm) Output Peak power (mW) Antenna Gain (dBi) Numeric Power density at 20cm (mW/ cm 2 ) Power density Limits (mW/cm 2 ) 1 2412 13.13 20.56 2.39 0.0098 1 6 2437 12.85 19.28 2.39 0.0092 1 11 2462 12.23 16.71 2.39 0.0079 1 801.11n HT 20 Channel Channel Frequency (MHz) Output Peak power (dBm) Output Peak power (mW) Antenna Gain (dBi) Numeric Power density at 20cm (mW/ cm 2 ) Power density Limits (mW/cm 2 ) 1 2412 12.82 19.14 2.39 0.0091 1 6 2437 12.15 16.41 2.39 0.0078 1 11 2462 11.64 14.59 2.39 0.0069 1 801.11n HT 40 Channel Channel Frequency (MHz) Output Peak power (dBm) Output Peak power (mW) Antenna Gain (dBi) Numeric Power density at 20cm (mW/ cm2 ) Power density Limits (mW/cm2 ) 3 2422 11.2 13.18 2.39 0.0063 1 6 2437 10.82 12.08 2.39 0.0057 1 9 2452 10.13 10.30 2.39 0.0049 1

TRF NoFCC 15.247/A Page 1 of 76 Report No E130301010E ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Awox StriimLIN K MODEL No.: SI-W FCC ID: A7K-SIW REPORT NO: E130301010E ISSUE DATE: April 19, 2013 Prepared for Awox 93 Place Pierre Duhem Montpellier France Prepared by SHENZHEN EMTEK CO., LTD. Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: 86-755-26954280 FAX: 86-755-26954282 TRF NoFCC 15.247/A Page 2 of 76 Report No E130301010E VERIFICATION OF COMPLIANCE Applicant: Awox 93 Place Pierre Duhem Montpellier France Manufacturer: Awox 93 Place Pierre Duhem Montpellier France Product Description: Awox StriimLINK Model Number: SI-W File Number: E130301010E Date of Test: April 1, 2013 to April 19, 2013 We hereby certify that: The above equipment was tested by SHENZHEN EMTEK CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2009) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247. The test results of this report relate only to the tested sample identified in this report. Date of Test : April 1, 2013 to April 19, 2013 Prepared by : Joe Xia/Editor Reviewer : King Wang/Supervisor Approve & Authorized Signer : Lisa Wang/Manager TRF NoFCC 15.247/A Page 3 of 76 Report No E130301010E Ta b l e o f C o n t e n t s 1. GENERAL INFORMATION ................................................................................................................................ 5 1.1 PRODUCT DESCRIPTION.................................................................................................................................... 5 1.2 RELATED SUBMITTAL(S) / GRANT(S)................................................................................................................. 5 1.3 TEST METHODOLOGY....................................................................................................................................... 6 1.4 SPECIAL ACCESSORIES...................................................................................................................................... 6 1.5 EQUIPMENT MODIFICATIONS............................................................................................................................ 6 1.6 TEST FACILITY.................................................................................................................................................. 6 2. SYSTEM TEST CONFIGURATION ................................................................................................................... 7 2.1 EUT CONFIGURATION....................................................................................................................................... 7 2.2 EUT EXERCISE................................................................................................................................................. 7 2.3 TEST PROCEDURE............................................................................................................................................. 7 2.4 CONFIGURATION OF TESTED SYSTEM............................................................................................................... 7 3. DESCRIPTION OF TEST MODES ..................................................................................................................... 8 4. SUMMARY OF TEST RESULTS......................................................................................................................... 8 5. CONDUCTED EMISSIONS TEST...................................................................................................................... 8 5.1 MEASUREMENT PROCEDURE............................................................................................................................ 8 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................................... 8 5.3 MEASUREMENT EQUIPMENT USED................................................................................................................... 8 5.4 CONDUCTED EMISSION LIMIT........................................................................................................................... 8 5.5 MEASUREMENT RESULT.................................................................................................................................... 8 6. RADIATED EMISSION TEST ............................................................................................................................. 8 6.1 MEASUREMENT PROCEDURE............................................................................................................................ 8 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................................... 8 6.3 MEASUREMENT EQUIPMENT USED................................................................................................................... 8 6.4 RADIATED EMISSION LIMIT...............................................................................................................................8 6.5 MEASUREMENT RESULT.................................................................................................................................... 8 7. 6DB BANDWIDTH TEST..................................................................................................................................... 8 7.1 MEASUREMENT PROCEDURE............................................................................................................................ 8 7.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................................... 8 7.3 MEASUREMENT …

Text truncated - open the document above for the full version.

TRF NoFCC 15.247/A Page 1 of 76 Report No E130301010E ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Awox StriimLIN K MODEL No.: SI-W FCC ID: A7K-SIW REPORT NO: E130301010E ISSUE DATE: April 19, 2013 Prepared for Awox 93 Place Pierre Duhem Montpellier France Prepared by SHENZHEN EMTEK CO., LTD. Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: 86-755-26954280 FAX: 86-755-26954282 TRF NoFCC 15.247/A Page 2 of 76 Report No E130301010E VERIFICATION OF COMPLIANCE Applicant: Awox 93 Place Pierre Duhem Montpellier France Manufacturer: Awox 93 Place Pierre Duhem Montpellier France Product Description: Awox StriimLINK Model Number: SI-W File Number: E130301010E Date of Test: April 1, 2013 to April 19, 2013 We hereby certify that: The above equipment was tested by SHENZHEN EMTEK CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2009) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247. The test results of this report relate only to the tested sample identified in this report. Date of Test : April 1, 2013 to April 19, 2013 Prepared by : Joe Xia/Editor Reviewer : King Wang/Supervisor Approve & Authorized Signer : Lisa Wang/Manager TRF NoFCC 15.247/A Page 3 of 76 Report No E130301010E Ta b l e o f C o n t e n t s 1. GENERAL INFORMATION ................................................................................................................................ 5 1.1 PRODUCT DESCRIPTION.................................................................................................................................... 5 1.2 RELATED SUBMITTAL(S) / GRANT(S)................................................................................................................. 5 1.3 TEST METHODOLOGY....................................................................................................................................... 6 1.4 SPECIAL ACCESSORIES...................................................................................................................................... 6 1.5 EQUIPMENT MODIFICATIONS............................................................................................................................ 6 1.6 TEST FACILITY.................................................................................................................................................. 6 2. SYSTEM TEST CONFIGURATION ................................................................................................................... 7 2.1 EUT CONFIGURATION....................................................................................................................................... 7 2.2 EUT EXERCISE................................................................................................................................................. 7 2.3 TEST PROCEDURE............................................................................................................................................. 7 2.4 CONFIGURATION OF TESTED SYSTEM............................................................................................................... 7 3. DESCRIPTION OF TEST MODES ..................................................................................................................... 8 4. SUMMARY OF TEST RESULTS......................................................................................................................... 8 5. CONDUCTED EMISSIONS TEST...................................................................................................................... 8 5.1 MEASUREMENT PROCEDURE............................................................................................................................ 8 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................................... 8 5.3 MEASUREMENT EQUIPMENT USED................................................................................................................... 8 5.4 CONDUCTED EMISSION LIMIT........................................................................................................................... 8 5.5 MEASUREMENT RESULT.................................................................................................................................... 8 6. RADIATED EMISSION TEST ............................................................................................................................. 8 6.1 MEASUREMENT PROCEDURE............................................................................................................................ 8 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................................... 8 6.3 MEASUREMENT EQUIPMENT USED................................................................................................................... 8 6.4 RADIATED EMISSION LIMIT...............................................................................................................................8 6.5 MEASUREMENT RESULT.................................................................................................................................... 8 7. 6DB BANDWIDTH TEST..................................................................................................................................... 8 7.1 MEASUREMENT PROCEDURE............................................................................................................................ 8 7.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................................... 8 7.3 MEASUREMENT …

Text truncated - open the document above for the full version.

Conducted Emissions Test Radiated Emission Test

Conducted Emissions Test Radiated Emission Test