A8J-ENH710EXTN600 2T2R Base Station

User Manual Business Solutions Dual Band Long Range Wireless N600 Outdoor Access Point ENH710EXT version 1.0 2 IMPORTANT To install this Access Point please refer to the Quick Installation Guide included in the product packaging. 3 Chapter 1 Product Overview............................................... 4 Key Features/Introduction........................................................ 5 System Requirements............................................................... 6 Package Contents......................................................................... 7 Technical Specifications.............................................................. 8 Physical Interface.......................................................................... 10 Chapter 2 Before You Begin................................................. 11 Computer Settings....................................................................... 12 Hardware Installation................................................................. 15 Mounting the ENH710EXT...................................................... 16 Chapter 3 Configuring Your Access Point......................... 20 Default Settings./Web Configuration................................ 21 Chapter 4 Building a Wireless Network........................... 22 Access Point Mode...................................................................... 23 Client Bridge Mode...................................................................... 24 WDS AP Mode.............................................................................. 25 WDS Bridge Mode........................................................................ 26 WDS Station Mode....................................................................... 27 Chapter 5 Status.................................................................... 28 Main Status..................................................................................... 29 Connection...................................................................................... 31 Chapter 6 Network .............................................................. 33 Basic IP Settings............................................................................ 34 Spanning Tree Protocol Setting............................................. 35 Chapter 7 2.4 GHz/5 GHz Wireless....................................... 36 Wireless Settings............................................................................ 37 2.4 GHz/5 GHz Wireless Network........................................... 38 2.4GHz/5 GHz SSID Profile...................................................... 40 Wireless Security.......................................................................... 41 Wireless MAC Filtering............................................................... 42 Wireless Advanced..................................................................... 43 WPS Mixed-Enterprise: AP/WDS AP Mode........................... 44 WDS Link Settings....................................................................... 45 Client Bridge Settings.............................................................. 46 Guest Network Settings............................................................ 47 Chapter 8 Management ........................................................ 48 Management VLAN Settings.................................................. 49 Advanced Settings....................................................................... 50 CLI Settings/Email Alert............................................................. 51 Time Zone........................................................................................ 53 Auto Reboot Settings................................................................ 54 Wi-Fi Scheduler............................................................................... 55 Tools.................................................................................................. 56 Account/Firmware........................................................................ 58 Backup/Restore ............................................................................. 59 Log...................................................................................................... 61 Logout/Reset................................................................................. 62 Appendix................................................................................. 63 FCC Interference Statement................................................... 64 CE Interference Statement...................................................... 65 IC Interference Statement....................................................... 68 Professional Installation Instruction.................................... 69 Instructions d’installation professionnelle...................... 70 Detachable Antenna Usage.................................................... 71 Table of Contents 4 Chapter 1 Product Overview 5 Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright © 2014 EnGenius Technologies, Inc. All rights reserved. Key Features • Up to 27 dBm transmit power enabling long range connectivity • Supports IEEE802.11a/b/g/n wireless standards with up to 300 Mbps data rate on each band. • Two detachable 5 dBi 2.4 GHz Omni-directional antennas • Two detachable 7 dBi 5 GHz Omni-directional antennas • Can be used with included power adapter or via PoE with PoE 802.3at - capable switches or injectors • Band Steering shifts dual band clients to 5 GHz for better throughput performance • Secured Guest Network option availabl…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4

Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14

Customers:神準科技股份有限公司 Customer Model No.: Master Wave Model No.:98615MNXX000 Product Description: Issue Date: REV.:01 承 認 書 APPROVAL SHEET 2013/10/21 8615 Outdoor Antenna 核准 Approve主管 Chief承辦 Responsible HaleyMattHero 客戶承認用印 Customer Approved 權億承認用印 Confirmation Signature 2013.10.21 MASTER WAVE TECHNOLOGY CO., LTD. 權億科技股份有限公司 Address: No.81-8, Longshou St., Taoyuan City, Taoyuan County 330, Taiwan (R.O.C.) Tel: +886-3-3600306 Fax: +886-3-3600979 Shengyih Electronic Plastic Co. Ltd (Shou Zhou) 聲億電子塑膠有限公司 (蘇州廠 ) Address: No.95 Wusong south Rd of Luzhi Town Wu zhong Area Suzhou City, China Tel：+86-512-65046030 Fax：+86-512-65046033 Shengyih Electronic Plastic Manufactory (Dongguan) 聲億電子塑膠製品廠 (東莞廠) Address: Mu-Lun Administration Area, Changping Town,Dongguan City.Guangdong Province,China T el：+86-769-83914045 Fax：+86-769-83914046 Table of Contents Item 1. Antenna Specifications -Drawing 2. Test Report -Electrical test -Pattern test -Efficiency 3. Material Certifications -Connector -Cable Modification History: REV.Content 00 012013/10/21Update Gain:5dBi & Test Report Date 2013/6/14 Electrical Test 2D Radiation Pattern H-Plane 2D Radiation Pattern E-Plane 3D Radiation Pattern 2400MHz 3D Radiation Pattern 2450MHz 3D Radiation Pattern 2500MHz Antenna Efficiency Frequency (MHz) 2400 2450 2500 Peak Gain (dBi) 4.59 4.51 4.6 Directivity (dBi) 5.91 6.31 6.49 Efficiency (dB) -1.33 -1.8 -1.89 Efficiency (%) 73.67 66.08 64.66 Material Specifications Material DataMaterial BodyBrass Center ContactBrass InsulatorTeflon 6.0~10.0 in. lbs (0.68~1.13Nm) -65°C ~ +165°C Connector N Operating Temperature 50 ohm 0~6 GHz ≦1.5 Impedance Frequency Range Contact Resistance Voltage Insulation Resistance Working Voltage Recommended coupling nut torque Dielectric Withstanding Electrical Properties ≦1000 Vrms ≦2500 Vrms ≧5000 Megohms Center contact: 1.0 Milliohms (Max.) Outer contact:1.0 Milliohms (Max.) Coupling nut retention force V.S.W.R ≧100 lbs (445N) Contact captivation axial≧6.2 lbs (27.6N) CABLE SPECIFICATION 線材規格

Customers:神準科技股份有限公司 Customer Model No.: Master Wave Model No.: 98615UNXX006 Product Description: Issue Date: REV.:00 承 認 書 APPROVAL SHEET 2014/11/27 8615 Outdoor Antenna 2008.6.23 核准 Approve 主管 Chief 承辦 Responsible Haley Matt Hero 客戶承認用印 權億承認用印 2014.11.27 MASTER WAVE TECHNOLOGY CO., LTD. 權億科技股份有限公司 Address: No.81-8, Longshou St., Taoyuan City, Taoyuan County 330, Taiwan (R.O.C.) Tel: +886-3-3600306 Fax: +886-3-3600979 Shengyih Electronic Plastic Co. Ltd (Shou Zhou) 聲億電子塑膠有限公司 (蘇州廠 ) Address: No.95 Wusong south Rd of Luzhi Town Wu zhong Area Suzhou City, China Tel：+86-512-65046030 Fax：+86-512-65046033 Shengyih Electronic Plastic Manufactory (Dongguan) 聲億電子塑膠製品廠 (東莞廠) Address: Mu-Lun Administration Area, Changping Town,Dongguan City.Guangdong Province,China Tel：+86-769-83914045 Fax：+86-769-83914046 Table of Contents Item 1. Antenna Specifications -Drawing 2. Test Report -Electrical test -Pattern test -Efficiency 3. Material Certifications -Connector Modification History: REV.Content 00 Date 2014/11/27 Electrical Test 2D Radiation Pattern H-Plane 2D Radiation Pattern E-Plane Antenna Efficiency ≧100 lbs (445N) Contact captivation axial≧6.2 lbs (27.6N) Voltage Insulation Resistance Working Voltage Recommended coupling nut torque Dielectric Withstanding ≦1000 Vrms ≦2500 Vrms ≧5000 Megohms Center contact: 1.0 Milliohms (Max.) Outer contact:1.0 Milliohms (Max.) Coupling nut retention force 6.0~10.0 in. lbs (0.68~1.13Nm) -65°C ~ +165°C Connector N Operating Temperature 50 ohm 0~6 GHz ≦1.5 Impedance Frequency Range Contact Resistance Electrical Properties Material Specifications Material Data V.S.W.R Material BodyBrass Center ContactBrass InsulatorTeflon

FCC ID: A8J-ENH710EXT Report No.: RF141112C35 Operational Description This device is a N600 2T2R Base Station, which operates in 2.4GHz & 5.0GHz band; the maximum data rate could be up to 300 Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 300Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by 48Vdc POE. The EUT is used Dipole antenna with N-Type connector. The other instruction, please have a look at the user’s manual. FCC 15.407(c) states: The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude the transmission of control or signaling information or the use of repetitive codes used by certain digital technologies to complete frame or burst intervals. Applicants shall include in their application for equipment authorization a description of how this requirement is met” Data transmission is always initiated by software, which is then pass down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets (ACKs, CTS, PSPoll, etc...) are initiated by the MAC. There are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets are being transmitted.

Report No.: SA141112C35 1 of 6 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA141112C35 MODEL NO.: ENH710EXT FCC ID: A8J-ENH710EXT RECEIVED: Nov. 12, 2014 TESTED: Dec. 01 ~ Dec. 15, 2014 ISSUED: Dec. 19, 2014 APPLICANT: EnGenius Technologies ADDRESS: 1580 Scenic Avenue, Costa Mesa, CA92626 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA141112C35 2 of 6 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................. 4 2. RF EXPOSURE ............................................................................................................... 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ......................................... 5 2.2 MPE CALCULATION FORMULA .................................................................................... 5 2.3 CLASSIFICATION ........................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .................................. 6 Report No.: SA141112C35 3 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA141112C35 Original release. Dec. 19, 2014 Report No.: SA141112C35 4 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: N600 2T2R Base Station MODEL: ENH710EXT BRAND: EnGenius APPLICANT: EnGenius Technologies TESTED: Dec. 01 ~ Dec. 15, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment (Model: ENH710EXT) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Dec. 19, 2014 Pettie Chen / Senior Specialist APPROVED BY : , DATE : Dec. 19, 2014 Ken Liu / Senior Manager Report No.: SA141112C35 5 of 6 Report Format Version 5.0.0 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA141112C35 6 of 6 Report Format Version 5.0.0 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 25.23 8.01 20 0.419 1 5180-5240 13.94 10.01 20 0.049 1 5745-5825 21.70 10.01 20 0.295 1 NOTE: 2.4GHz Band: Directional gain = 5dBi + 10log(2) = 8.01dBi 5.0GHz Band: Directional gain = 7dBi + 10log(2) = 10.01dBi CONCULSION: Both of the 2.4 and 5GHz can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density 1. WLAN 2.4G + WLAN 5.0G = 0.419 + 0.295 = 0.714 Therefore, the maximum calculation of this situation is 0.714, which is less than the “1” limit.

Report No.: RF141112C35 1 of 57 Report Format Version 5.2.0 FCC TEST REPORT (15.247) REPORT NO.: RF141112C35 MODEL NO.: ENH710EXT FCC ID: A8J-ENH710EXT RECEIVED: Nov. 12, 2014 TESTED: Dec. 01 ~ Dec. 15, 2014 ISSUED: Dec. 19, 2014 APPLICANT: EnGenius Technologies ADDRESS: 1580 Scenic Avenue, Costa Mesa, CA92626 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF141112C35 2 of 57 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 4 1. CERTIFICATION ............................................................................................................................ 5 2. SUMMARY OF TEST RESULTS ................................................................................................... 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 3. GENERAL INFORMATION ............................................................................................................ 7 3.1 GENERAL DESCRIPTION OF EUT .............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................................................ 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................................ 9 3.3 DUTY CYCLE OF TEST SIGNAL ................................................................................................ 11 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................ 12 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................................................... 12 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................. 13 4. TEST TYPES AND RESULTS ..................................................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................................... 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................... 14 4.1.2 TEST INSTRUMENTS ................................................................................................................. 15 4.1.3 TEST PROCEDURES ................................................................................................................. 16 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................................... 16 4.1.5 TEST SETUP ............................................................................................................................... 17 4.1.6 EUT OPERATING CONDITIONS ................................................................................................ 18 4.1.7 TEST RESULTS .......................................................................................................................... 19 4.2 CONDUCTED EMISSION MEASUREMENT .............................................................................. 32 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................................... 32 4.2.2 TEST INSTRUMENTS ................................................................................................................. 32 4.2.3 TEST PROCEDURES ................................................................................................................. 33 4.2.4 DEVIATION FROM TEST STANDARD ....................................................................................... 33 4.2.5 TEST SETUP ............................................................................................................................... 33 4.2.6 EUT OPERATING CONDITIONS ................................................................................................ 33 4.2.7 TEST RESULTS .......................................................................................................................... 34 4.3 6dB BANDWIDTH MEASUREMENT .......................................................................................... 36 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ....................…

Text truncated - open the document above for the full version.

Report No.: RF141112C35-1 1 of 58 Report Format Version 5.2.0 FCC TEST REPORT (15.407) REPORT NO.: RF141112C35-1 MODEL NO.: ENH710EXT FCC ID: A8J-ENH710EXT RECEIVED: Nov. 12, 2014 TESTED: Dec. 01 ~ Dec. 15, 2014 ISSUED: Dec. 19, 2014 APPLICANT: EnGenius Technologies ADDRESS: 1580 Scenic Avenue, Costa Mesa, CA92626 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF141112C35-1 2 of 58 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .......................................................................................... 4 1. CERTIFICATION ..................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY .......................................................................... 6 3. GENERAL INFORMATION ...................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ........................................................................ 7 3.2 DESCRIPTION OF TEST MODES .......................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .......................... 9 3.3 DUTY CYCLE OF TEST SIGNAL ......................................................................... 11 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................. 12 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 12 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 13 4. TEST TYPES AND RESULTS ............................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ............................... 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ............. 14 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS ......... 14 4.1.3 TEST INSTRUMENTS .......................................................................................... 15 4.1.4 TEST PROCEDURES ........................................................................................... 16 4.1.5 DEVIATION FROM TEST STANDARD ................................................................. 16 4.1.6 TEST SETUP ........................................................................................................ 17 4.1.7 EUT OPERATING CONDITION ............................................................................ 18 4.1.8 TEST RESULTS .................................................................................................... 19 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................ 36 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ..................................... 36 4.2.2 TEST INSTRUMENTS .......................................................................................... 36 4.2.3 TEST PROCEDURES ........................................................................................... 37 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 37 4.2.5 TEST SETUP ........................................................................................................ 37 4.2.6 EUT OPERATING CONDITIONS .......................................................................... 37 4.2.7 TEST RESULTS .................................................................................................... 38 4.3 TRANSMIT POWER MEASUREMENT ................................................................ 40 4.3.1 LIMITS OF TRANSMIT POWER MEASUREMENT .............................................. 40 4.3.2 TEST SETUP ........................................................................................................ 40 4.3.3 TEST INSTRUMENTS .......................................................................................... 41 4.3.4 TEST PROCEDURE ............................................................................................. 41 4.3.5 DEVIATION FROM TEST STANDARD ................................................................. 41 4.3.6 EUT OPERATING CONDITIONS .............................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST (2.4GHz Band) 3 RADIATED EMISSION TEST (5.0GHz Band)