A8J-ENSTA55GHz a/n N300 CPE

CONVENTIONS VI Conventions The following conventions are used to give the user additional information about specific procedures or content. It is important to pay attention to these conventions as they provide informa- tion to prevent damage to equipment or personal injury. General Conventions The following general conventions are used in this document. N/A: Indicates that a component or a procedure is not applica- ble to this model. Prerequisite: Indicates a requirement that must be addressed before proceeding with the current function or procedure. CAUTION! CAUTIONS APPEAR BEFORE THE TEXT IT REFERENCES. CAU- TIONS APPEAR IN CAPITAL LETTERS TO EMPHASIZE THAT THE MESSAGE CONTAINS VITAL HEALTH AND SAFETY INFORMATION. WARNING! Warning information appears before the text it references to emphasize that the content may prevent damage to the device or equipment. Important: Indicates information that is important to know for the proper completion of a procedure, choice of an option, or completing a task. Note: Indicates additional information that is relevant to the cur- rent process or procedure. ! ! Example: Indicates information used to demonstrate or explain an associated concept. CONVENTIONS VII Typographical Conventions The following typographical conventions are used in this docu- ment: Italics Indicates book titles, directory names, file names, path names, and program/process names. Constant width Indicates computer output shown on a computer screen, includ- ing menus, prompts, responses to input, and error messages. Constant width bold Indicates commands lines as entered on the computer. Vari- ables contained within user input are shown in angle brackets (< >). Bold Indicates keyboard keys that are pressed by the user. TABLE OF CONTENTS III TABLE OF CONTENTS Conventions0-i Copyright0-ix Product Overview Package Contents1-1 Product Overview1-2 Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Technical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4 Wireless Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4 Hardware Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4 Software Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4 Product Interface1-5 Installation System Requirements2-1 TABLE OF CONTENTS IV Installing the Device2-2 Pre-Installation Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2 Installing the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2 Wall Mounting the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 Pole Mounting the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4 Web Configuration Logging In3-1 Best Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2 Basic Network Settings System Status4-1 Using Save/Reload4-1 Viewing System Information4-2 Viewing Wireless Client List4-4 Viewing System Log4-5 Viewing Connection Status4-6 Viewing DHCP Client Table4-7 TABLE OF CONTENTS V Viewing WDS Link List4-8 System Setup4-9 Configuring Operation Mode4-9 Configuring IP Settings4-10 Configuring Spanning Tree Settings4-11 Router Setup4-12 Configuring WAN Settings4-12 Static IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Dynamic IP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13 Point-to-Point Protocol over Ethernet (PPPoE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14 Point-to-Point Tunnelling Protocol (PPTP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15 Configuring LAN Settings4-17 Configuring VPN Pass-Through4-18 Configuring Port Forwarding4-19 Configuring Demilitarized Zone4-21 Configuring Wireless LAN4-22 Configuring Wireless Settings4-22 Access Point Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22 Client Bridge Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24 WDS Bridge Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25 TABLE OF CONTENTS VI Client Router Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27 Configuring Wireless Security4-28 Wired Equivalent Privacy (WEP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28 Wi-Fi Protected Access Pre-Shared Key (WPA-PSK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29 Wi-Fi Protected Access 2 Pre-Shared Key (WPA2-PSK). . . . . . . . . . . . . . . . . . . . . . . . . . 4-30 Wi-Fi Protected Access Pre-Shared Key (WPA-PSK) Mixed . . . . . . . . . . . . . . . . . . . . . . . 4-31 Wi-Fi Protected Access (WPA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32 Wi-Fi Protected Access 2 (WPA2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33 Wi-Fi Protected Access (WPA) Mixed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34 Configuring Wireless MAC Filter4-35 Configuring WDS Link Settings4-36 Configuring Advanced Network Settings4-37 Wireless Traffic Shaping . . . . . . . . . . . . . . . . . . . . . . . . . . . …

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4

Page 5 Page 6 Page 7 Page 8 Page 9 Page 10

Report No.: SA140808C14 1 of 5 Report Format Version 5.0.1 Reference No.: 140801C22 RF EXPOSURE REPORT REPORT NO.: SA140808C14 MODEL NO.: EnStation5, EST500 FCC ID: A8J-ENSTA5 RECEIVED: Aug. 01, 2014 TESTED: Aug. 01 ~ Aug. 08, 2014 ISSUED: Aug. 12, 2014 APPLICANT: EnGenius Technologies ADDRESS: 1580 Scenic Avenue, Costa Mesa, CA92626 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. Report No.: SA140808C14 2 of 5 Report Format Version 5.0.1 Reference No.: 140801C22 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................. 4 2. RF EXPOSURE ............................................................................................................... 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ......................................... 5 2.2 MPE CALCULATION FORMULA .................................................................................... 5 2.3 CLASSIFICATION ........................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .................................. 5 Report No.: SA140808C14 3 of 5 Report Format Version 5.0.1 Reference No.: 140801C22 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140808C14 Original release. Aug. 12, 2014 Report No.: SA140808C14 4 of 5 Report Format Version 5.0.1 Reference No.: 140801C22 1. CERTIFICATION PRODUCT: 5GHz a/n N300 CPE MODEL: EnStation5, EST500 BRAND: EnGenius, emplus APPLICANT: EnGenius Technologies TESTED: Aug. 01 ~ Aug. 08, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment (Model: EnStation5) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Aug. 12, 2014 Celine Chou / Specialist APPROVED BY : , DATE : Aug. 12, 2014 Ken Liu / Senior Manager Report No.: SA140808C14 5 of 5 Report Format Version 5.0.1 Reference No.: 140801C22 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 5180-5240 16.48 18.51 20 0.628 1 5745-5825 15.03 18.51 20 0.450 1 NOTE: Directional gain = 15.5dBi + 10log(2) = 18.51dBi

Report No.: RF140808C14 1 of 59 Report Format Version 5.3.0 Reference No.: 140801C22 FCC TEST REPORT (15.407) REPORT NO.: RF140808C14 MODEL NO.: EnStation5, EST500 (Refer to items 3.1 for more details) FCC ID: A8J-ENSTA5 RECEIVED: Aug. 01, 2014 TESTED: Aug. 01 ~ Aug. 08, 2014 ISSUED: Aug. 12, 2014 APPLICANT: EnGenius Technologies ADDRESS: 1580 Scenic Avenue, Costa Mesa, CA92626 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140808C14 2 of 59 Report Format Version 5.3.0 Reference No.: 140801C22 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................................. 4 1. CERTIFICATION .......................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ................................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY .............................................................................................. 6 3. GENERAL INFORMATION .......................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................ 7 3.2 DESCRIPTION OF TEST MODES .............................................................................................. 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL............................................ 10 3.3 DUTY CYCLE OF TEST SIGNAL .............................................................................................. 12 3.4 DESCRIPTION OF SUPPORT UNITS ...................................................................................... 14 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ....................................................................... 14 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................................... 15 4. TEST TYPES AND RESULTS ................................................................................................... 16 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................................... 16 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 16 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS ............................ 16 4.1.3 TEST INSTRUMENTS ............................................................................................................... 17 4.1.4 TEST PROCEDURES ............................................................................................................... 18 4.1.5 DEVIATION FROM TEST STANDARD ..................................................................................... 18 4.1.6 TEST SETUP ............................................................................................................................. 19 4.1.7 EUT OPERATING CONDITION ................................................................................................ 20 4.1.8 TEST RESULTS ........................................................................................................................ 21 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................................ 38 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ......................................................... 38 4.2.2 TEST INSTRUMENTS ............................................................................................................... 38 4.2.3 TEST PROCEDURES ............................................................................................................... 39 4.2.4 DEVIATION FROM TEST STANDARD ..................................................................................... 39 4.2.5 TEST SETUP ............................................................................................................................. 39 4.2.6 EUT OPERATING CONDITIONS .............................................................................................. 39 4.2.7 TEST RESULTS ............................................................................................................ ............ 40 4.3 TRANSMIT POWER MEASUREMENT ..........................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST