ACJ-11AR1201ACTIVE SUBWOOFER

until 2012/04/30 Owner’s Manual Home Theater Audio System Model No. SC-HTB550 P Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. If you have any questions, contact: U.S.A. and Puerto Rico: 1-800-211-PANA (7262) Canada: 1-800-561-5505 RQT9660-P PC SC-HTB550_RQT9660_mst.book Page 1 Tuesday, December 20, 2011 1:55 PM 2 RQT9660 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1Read these instructions. 2Keep these instructions. 3Heed all warnings. 4Follow all instructions. 5Do not use this apparatus near water. 6Clean only with dry cloth. 7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Unit ≥To reduce the risk of fire, electric shock or product damage, jDo not expose this unit to rain, moisture, dripping or splashing. jDo not place objects filled with liquids, such as vases, on this unit. jUse only the recommended accessories. jDo not remove covers. jDo not repair this unit by yourself. Refer servicing to qualified service personnel. Button-type battery (Lithium battery) ≥Risk of fire, explosion and burns. Do not disassemble, heat above 60 o C (140 o F) or incinerate. Unit ≥Do not place sources of naked flames, such as lighted candles, on this unit. Placement ≥To reduce the risk of fire, electric shock or product damage, jDo not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. jDo not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. Button-type battery (Lithium battery) ≥Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. ≥When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. ≥Insert with poles aligned. ≥Do not touch the terminals (i and j) with metal objects. ≥Do not recharge, disassemble, remodel, heat or throw into fire. ≥Keep out of reach of children. ≥Mishandling of batteries can cause electrolyte leakage and may cause a fire. jRemove the battery if you do not intend to use the remote control for a long period of time. Store in a cool, dark place. ≥Do not heat or expose to flame. ≥Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. WARNING If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor. <For USA-California only> This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material s special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. CAUTION SC-HTB550_RQT9660_mst.book Page 2 Tuesday, December 20, 2011 1:55 PM RQT9660 3 Precautions THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA This device complies with Part 15 of FCC Rules and RSS- Gen of IC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This product is restricted to indoor use due to its operation in the 5.150 GHz to 5.250 GHz and 5.725 GHz to 5.850 GHz frequency range. FCC and IC require this product to be used indoors for the frequency range 5.150 GHz to 5.250 GHz and 5.725 GHz to 5.850 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirabl…

Text truncated - open the document above for the full version.

Getting started RQT9660 19 Step 3 Connections ≥Turn off all equipment before connection and read the appropriate owner’s manual. Do not connect the AC power supply cord until all other connections are complete. ∫HDMI The HDMI connection supports VIERA Link “HDAVI Control” (>25) when used with a compatible Panasonic TV. ≥Use the High Speed HDMI Cables. It is recommended that you use Panasonic’s HDMI cable. Recommended part number (High Speed HDMI cable): RP-CDHS15 (1.5 m/4.9 ft), RP-CDHS30 (3.0 m/9.8 ft), RP-CDHS50 (5.0 m/16.4 ft), etc. ≥Non-HDMI-compliant cables cannot be utilized. Verify if the TV’s HDMI terminal is labeled “HDMI (ARC)”. ∫What is ARC? ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. It refers to one of the HDMI functions. When you connect the main unit to the terminal labeled “HDMI (ARC)”, the optical digital audio cable that is usually required in order to listen to sound from a TV is no longer required, and TV pictures and sound can be enjoyed with a single HDMI cable. Make the connection. Connection with the TV Connection differs depending on the label printed next to the HDMI terminal. Labeled “HDMI (ARC)”: Connection [A] Not Labeled “HDMI (ARC)”: Connection [B] [A] Labeled “HDMI (ARC)” HDMI cable [B] Not labeled “HDMI (ARC)” HDMI cable Optical digital audio cable ≥When you use the optical digital audio cable, insert the tip correctly into the terminal. SPEAKERS / HAUT-PARLEURS AV OUT DIGITAL AUDIO IN TV (ARC) AC IN HDMI IN (ARC) AV IN TV (ARC) BD/DVD (HDMI1) BD/DVD (HDMI1) AUX1 (HDMI2) AV OUT  TV Main unit Be sure to connect to the TV’s ARC compatible terminal. (Refer to the operating instructions for the TV.) SPEAKERS / HAUT-PARLEURS 6 R L AV OUT DIGITAL AUDIO IN TV (OPT1) TV (ARC) AC IN HDMI IN OPTICAL OUT TV (ARC) AV OUT DIGITAL AUDIO IN TV (OPT1)   TV Main unit SC-HTB550_RQT9660_mst.book Page 19 Tuesday, December 20, 2011 1:55 PM 20 RQT9660 You can direct the audio signal from the connected Blu-ray Disc player TM , DVD player, Set Top Box, etc. to this system. Preparation ≥Connect the main unit to the TV (>19). ∫HDMI standby pass-through Even if the main unit is in standby mode, the audio and/or video signal from the device connected to the BD/DVD or AUX1 terminal will be sent to the TV connected to the HDMI OUT terminal (the sound will not be output from this system). When devices are connected to both BD/DVD and AUX1 terminals, audio and/or video signal of the device whose input is lastly selected is output. ∫3D compatibility Compatible with FULL HD 3D TV and Blu-ray Disc player TM . ≥The main unit can pass the 3D video signal from a 3D compatible Blu-ray Disc player TM to a FULL HD 3D TV. Connection with other devices When the device has an HDMI terminal HDMI cable When the device has an optical digital audio output terminal Refer to the operating instructions of the respective devices for the optimal connection Optical digital audio cable HDMI OUT HDMI OUT SPEAKERS / HAUT-PARLEURS AV IN DIGITAL AUDIO IN BD/DVD (HDMI1) BD/DVD (HDMI1) AUX1 (HDMI2) AC IN AV IN BD/DVD (HDMI1) BD/DVD (HDMI1) AUX1 (HDMI2)  e.g., Video game console Main unit e.g., Blu-ray Disc player TM OPTICAL OUT SPEAKERS / HAUT-PARLEURS DIGITAL AUDIO IN AUX2 (OPT2) AC IN DIGITAL AUDIO IN AUX2 (OPT2)   e.g., Set top box Main unit TV SC-HTB550_RQT9660_mst.book Page 20 Tuesday, December 20, 2011 1:55 PM Getting started RQT9660 21 Match the connector shape and connect to the terminals of the same color. ≥Connect only after all other connections are complete. ≥The main unit and active subwoofer consume a small amount of AC power, even when it is turned off (this unit: approx. 0.1 W, active subwoofer: approx. 0.1 W). In the interest of power conservation, if you will not be using this system for a long time, unplug it from the household AC outlet. Speaker cable connection RED Right speaker channel (R) WHITE Left speaker channel (L) AC power supply cord connection AC power supply cordTo a household AC outlet Install this unit so that the power cord can be unplugged from the socket outlet immediately if any problem occurs. Saving energy The main unit is designed to conserve its power consumption and save energy. ≥ The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx. 30 minutes. SPEAKERS / HAUT-PARLEURS 6 R L DIGITAL AUDIO IN AC IN SPEAKERS / HAUT-PARLEURS 6 RL   Main unit AC IN SPEAKERS / HAUT-PARLEURS DIGITAL AUDIO IN AC IN     AC IN Main unit Active subwoofer SC-HTB550_RQT9660_mst.book Page 21 Tuesday, December 20, 2011 1:55 PM 22 RQT9660 Preparation ≥Turn on the main unit. Press [BÍ CI]. Check that the wireless link is activated. WIRELESS LINK indicator lights ≥Red: The wireless link is not activated. ≥Green: The wireless link is activated. The unit will still consume a small amount of power even when it is turned off (B, Í) With the Bluetooth ® connection you can output the audio from the connected wireless device. Preparation ≥Turn on the Bluetooth ® feature of the device and place the device near this unit. Press [, j PAIRING]. ≥“” indicator will blink quickly. Select “SC-HTB550” from the Bluetooth ® device’s Bluetooth ® menu. ≥Refer to the operating instructions of the Bluetooth ® device for further instruction on how to connect a Bluetooth ® device. ≥Once the Bluetooth ® device is connected, the “” indicator stops flashing and lights up. ≥If prompted for the passkey on the Bluetooth ® device, enter “0000”. Press [, j PAIRING]. Press and hold the [ , j PAIRING] until the “ ” indicator flashes quickly. Repeat step 2 of “Pairing a device”. ≥You can register up to 6 devices with this unit. If a 7th device is paired, the device that has not been used for the longest time will be replaced. ≥This unit can only be connected to one device at a time. ≥To change the sound quality, refer to “Bluetooth ® communication mode” on page 26. Active subwoofer wireless connection Bluetooth ® conn…

Text truncated - open the document above for the full version.

until 2012/04/30 Owner’s Manual Home Theater Audio System Model No. SC-HTB550 P Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. If you have any questions, contact: U.S.A. and Puerto Rico: 1-800-211-PANA (7262) Canada: 1-800-561-5505 RQT9660-P PC SC-HTB550_RQT9660_mst.book Page 1 Tuesday, December 20, 2011 1:55 PM 2 RQT9660 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1Read these instructions. 2Keep these instructions. 3Heed all warnings. 4Follow all instructions. 5Do not use this apparatus near water. 6Clean only with dry cloth. 7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Unit ≥To reduce the risk of fire, electric shock or product damage, jDo not expose this unit to rain, moisture, dripping or splashing. jDo not place objects filled with liquids, such as vases, on this unit. jUse only the recommended accessories. jDo not remove covers. jDo not repair this unit by yourself. Refer servicing to qualified service personnel. Button-type battery (Lithium battery) ≥Risk of fire, explosion and burns. Do not disassemble, heat above 60 o C (140 o F) or incinerate. Unit ≥Do not place sources of naked flames, such as lighted candles, on this unit. Placement ≥To reduce the risk of fire, electric shock or product damage, jDo not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. jDo not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. Button-type battery (Lithium battery) ≥Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. ≥When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. ≥Insert with poles aligned. ≥Do not touch the terminals (i and j) with metal objects. ≥Do not recharge, disassemble, remodel, heat or throw into fire. ≥Keep out of reach of children. ≥Mishandling of batteries can cause electrolyte leakage and may cause a fire. jRemove the battery if you do not intend to use the remote control for a long period of time. Store in a cool, dark place. ≥Do not heat or expose to flame. ≥Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. WARNING If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor. <For USA-California only> This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material s special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. CAUTION SC-HTB550_RQT9660_mst.book Page 2 Tuesday, December 20, 2011 1:55 PM RQT9660 3 Precautions THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA This device complies with Part 15 of FCC Rules and RSS- Gen of IC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This product is restricted to indoor use due to its operation in the 5.150 GHz to 5.250 GHz and 5.725 GHz to 5.850 GHz frequency range. FCC and IC require this product to be used indoors for the frequency range 5.150 GHz to 5.250 GHz and 5.725 GHz to 5.850 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirabl…

Text truncated - open the document above for the full version.

Getting started RQT9660 19 Step 3 Connections ≥Turn off all equipment before connection and read the appropriate owner’s manual. Do not connect the AC power supply cord until all other connections are complete. ∫HDMI The HDMI connection supports VIERA Link “HDAVI Control” (>25) when used with a compatible Panasonic TV. ≥Use the High Speed HDMI Cables. It is recommended that you use Panasonic’s HDMI cable. Recommended part number (High Speed HDMI cable): RP-CDHS15 (1.5 m/4.9 ft), RP-CDHS30 (3.0 m/9.8 ft), RP-CDHS50 (5.0 m/16.4 ft), etc. ≥Non-HDMI-compliant cables cannot be utilized. Verify if the TV’s HDMI terminal is labeled “HDMI (ARC)”. ∫What is ARC? ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. It refers to one of the HDMI functions. When you connect the main unit to the terminal labeled “HDMI (ARC)”, the optical digital audio cable that is usually required in order to listen to sound from a TV is no longer required, and TV pictures and sound can be enjoyed with a single HDMI cable. Make the connection. Connection with the TV Connection differs depending on the label printed next to the HDMI terminal. Labeled “HDMI (ARC)”: Connection [A] Not Labeled “HDMI (ARC)”: Connection [B] [A] Labeled “HDMI (ARC)” HDMI cable [B] Not labeled “HDMI (ARC)” HDMI cable Optical digital audio cable ≥When you use the optical digital audio cable, insert the tip correctly into the terminal. SPEAKERS / HAUT-PARLEURS AV OUT DIGITAL AUDIO IN TV (ARC) AC IN HDMI IN (ARC) AV IN TV (ARC) BD/DVD (HDMI1) BD/DVD (HDMI1) AUX1 (HDMI2) AV OUT  TV Main unit Be sure to connect to the TV’s ARC compatible terminal. (Refer to the operating instructions for the TV.) SPEAKERS / HAUT-PARLEURS 6 R L AV OUT DIGITAL AUDIO IN TV (OPT1) TV (ARC) AC IN HDMI IN OPTICAL OUT TV (ARC) AV OUT DIGITAL AUDIO IN TV (OPT1)   TV Main unit SC-HTB550_RQT9660_mst.book Page 19 Tuesday, December 20, 2011 1:55 PM 20 RQT9660 You can direct the audio signal from the connected Blu-ray Disc player TM , DVD player, Set Top Box, etc. to this system. Preparation ≥Connect the main unit to the TV (>19). ∫HDMI standby pass-through Even if the main unit is in standby mode, the audio and/or video signal from the device connected to the BD/DVD or AUX1 terminal will be sent to the TV connected to the HDMI OUT terminal (the sound will not be output from this system). When devices are connected to both BD/DVD and AUX1 terminals, audio and/or video signal of the device whose input is lastly selected is output. ∫3D compatibility Compatible with FULL HD 3D TV and Blu-ray Disc player TM . ≥The main unit can pass the 3D video signal from a 3D compatible Blu-ray Disc player TM to a FULL HD 3D TV. Connection with other devices When the device has an HDMI terminal HDMI cable When the device has an optical digital audio output terminal Refer to the operating instructions of the respective devices for the optimal connection Optical digital audio cable HDMI OUT HDMI OUT SPEAKERS / HAUT-PARLEURS AV IN DIGITAL AUDIO IN BD/DVD (HDMI1) BD/DVD (HDMI1) AUX1 (HDMI2) AC IN AV IN BD/DVD (HDMI1) BD/DVD (HDMI1) AUX1 (HDMI2)  e.g., Video game console Main unit e.g., Blu-ray Disc player TM OPTICAL OUT SPEAKERS / HAUT-PARLEURS DIGITAL AUDIO IN AUX2 (OPT2) AC IN DIGITAL AUDIO IN AUX2 (OPT2)   e.g., Set top box Main unit TV SC-HTB550_RQT9660_mst.book Page 20 Tuesday, December 20, 2011 1:55 PM Getting started RQT9660 21 Match the connector shape and connect to the terminals of the same color. ≥Connect only after all other connections are complete. ≥The main unit and active subwoofer consume a small amount of AC power, even when it is turned off (this unit: approx. 0.1 W, active subwoofer: approx. 0.1 W). In the interest of power conservation, if you will not be using this system for a long time, unplug it from the household AC outlet. Speaker cable connection RED Right speaker channel (R) WHITE Left speaker channel (L) AC power supply cord connection AC power supply cordTo a household AC outlet Install this unit so that the power cord can be unplugged from the socket outlet immediately if any problem occurs. Saving energy The main unit is designed to conserve its power consumption and save energy. ≥ The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx. 30 minutes. SPEAKERS / HAUT-PARLEURS 6 R L DIGITAL AUDIO IN AC IN SPEAKERS / HAUT-PARLEURS 6 RL   Main unit AC IN SPEAKERS / HAUT-PARLEURS DIGITAL AUDIO IN AC IN     AC IN Main unit Active subwoofer SC-HTB550_RQT9660_mst.book Page 21 Tuesday, December 20, 2011 1:55 PM 22 RQT9660 Preparation ≥Turn on the main unit. Press [BÍ CI]. Check that the wireless link is activated. WIRELESS LINK indicator lights ≥Red: The wireless link is not activated. ≥Green: The wireless link is activated. The unit will still consume a small amount of power even when it is turned off (B, Í) With the Bluetooth ® connection you can output the audio from the connected wireless device. Preparation ≥Turn on the Bluetooth ® feature of the device and place the device near this unit. Press [, j PAIRING]. ≥“” indicator will blink quickly. Select “SC-HTB550” from the Bluetooth ® device’s Bluetooth ® menu. ≥Refer to the operating instructions of the Bluetooth ® device for further instruction on how to connect a Bluetooth ® device. ≥Once the Bluetooth ® device is connected, the “” indicator stops flashing and lights up. ≥If prompted for the passkey on the Bluetooth ® device, enter “0000”. Press [, j PAIRING]. Press and hold the [ , j PAIRING] until the “ ” indicator flashes quickly. Repeat step 2 of “Pairing a device”. ≥You can register up to 6 devices with this unit. If a 7th device is paired, the device that has not been used for the longest time will be replaced. ≥This unit can only be connected to one device at a time. ≥To change the sound quality, refer to “Bluetooth ® communication mode” on page 26. Active subwoofer wireless connection Bluetooth ® conn…

Text truncated - open the document above for the full version.

until 2012/04/30 Owner’s Manual Home Theater Audio System Model No. SC-HTB350 P Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. If you have any questions, contact: U.S.A. and Puerto Rico: 1-800-211-PANA (7262) RQT9670-P SC-HTB350_RQT9670_mst.book Page 1 Tuesday, December 20, 2011 2:05 PM 2 RQT9670 Table of contents IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1Read these instructions. 2Keep these instructions. 3Heed all warnings. 4Follow all instructions. 5Do not use this apparatus near water. 6Clean only with dry cloth. 7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Unit ≥To reduce the risk of fire, electric shock or product damage, jDo not expose this unit to rain, moisture, dripping or splashing. jDo not place objects filled with liquids, such as vases, on this unit. jUse only the recommended accessories. jDo not remove covers. jDo not repair this unit by yourself. Refer servicing to qualified service personnel. Button-type battery (Lithium battery) ≥Risk of fire, explosion and burns. Do not disassemble, heat above 60 o C (140 o F) or incinerate. Unit ≥Do not place sources of naked flames, such as lighted candles, on this unit. Placement ≥To reduce the risk of fire, electric shock or product damage, jDo not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. jDo not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. Button-type battery (Lithium battery) ≥Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. ≥When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. ≥Insert with poles aligned. ≥Do not touch the terminals (i and j) with metal objects. ≥Do not recharge, disassemble, remodel, heat or throw into fire. ≥Keep out of reach of children. ≥Mishandling of batteries can cause electrolyte leakage and may cause a fire. jRemove the battery if you do not intend to use the remote control for a long period of time. Store in a cool, dark place. ≥Do not heat or expose to flame. ≥Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. WARNING If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor. <For USA-California only> This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material s special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate . CAUTION SC-HTB350_RQT9670_mst.book Page 2 Tuesday, December 20, 2011 2:05 PM RQT9670 3 Precautions THE FOLLOWING APPLIES ONLY IN THE U.S.A. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This product is restricted to indoor use due to its operation in the 5.150 GHz to 5.250 GHz and 5.725 GHz to 5.850 GHz frequency range. FCC require this product to be used indoors for the frequency range 5.150 GHz to 5.250 GHz and 5.725 GHz to 5.850 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm (7 7 / 8q) or more away fr…

Text truncated - open the document above for the full version.