ACJ-DY-WL5WIRELESS LAN ADAPTOR

Confidential 1 Panasonic WIRELESS LAN ADAPTOR DY-WL5 User Manual Rev. 0.01 Confidential 2 Reviewers Department Name Review Dates Plan Results Director of Engineering Opo.Lee Hardware Engineering Lary S.C. Luo Confidential 3 Table of Contents 1. INTRODUCTION .................................................................................................................................................. 4 1.1 SCOPE .......................................................................................................................................................... 4 1.2 FUNCTION ................................................................................................................................................... 4 2. PRODUCT SPECIFICATION ............................................................................................................................... 5 2.1 RF SPECIFICATION ............................................................................................................................................... 5 2.2 ELECTRICAL SPECIFICATION ................................................................................................................................ 6 3. PIN DESCRIPTIONS ............................................................................................................................................. 7 3.1 USB PIN DESCRIPTIONS ....................................................................................................................................... 7 3.2 RF CONNECTOR ................................................................................................................................................... 7 4. MECHANICAL DRAWING .................................................................................................................................. 8 APPENDIX : STATEMENT ...................................................................................................................................... 9 Confidential 4 1. Introduction Project Name: WIRELESS LAN ADAPTOR This documentation describes the product specification of the WIFI 802.11b/g/n USB Dongle, it is a confidential document of FOXCONN. This Wireless LAN adapter is specifically designed for use with Panasonic mobile wireless LAN-compatible players, recorders, etc. This wireless LAN adapter does not support PC, Notebook PC or tablet PC operation and will not function when plugged into those devices. 1.1 Scope The DY-WL5 802.11b/g/n Dongle provides wireless modem functionality utilizing CCK and OFDM technology. The objective of this use manual is to verify the functionality of the DY-WL5 802.11b/g/n Dongle RF/Digital electronic design against the design specifications. 1.2 Function
Support IEEE 802.11b/g/n specified functions
1x1 single stream with antenna diversity
USB2.0 interface support Confidential 5 2. Product Specification 2.1 RF Specification Confidential 6 2.2 Electrical Specification Absolute Maximum Ratings These specifications indicate levels where permanent damage to the device can occur. Functional operation is not guaranteed under these conditions. Operation at absolute maximum conditions for extended can adversely affect long-term reliability of the device. DC Specification Confidential 7 3. Pin descriptions 3.1 USB Pin descriptions 3.2 RF Connector 4. Mechanical Drawing Confidential Mechanical Drawing 8 Confidential 9 Appendix : Statement Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Confidential 10 Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interfe…

Text truncated - open the document above for the full version.

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] RICHARD MULLEN Group Manager Product Safety and Compliance Division General Declaration December 16, 2011 AVG-11-U097 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Panasonic Wireless LAN Adaptor, Model DY-WL5 FCC ID: ACJ-DY-WL5 To Whom It May Concern: We, Panasonic Corporation of North America hereby declare that Panasonic Wireless LAN Adaptor, Model DY-WL5 under FCC ID: ACJ-DY-WL5 does not have “Ad Hoc on non-US frequencies.” Thank you for your attention to this matter. Sincerely, Richard Mullen Richard Mullen Group Manager Product Safety & Compliance Division

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] RICHARD MULLEN Group Manager Product Safety and Compliance Division Request for Confidentiality January 12, 2012 AVG-11-U097 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Panasonic Wireless LAN Adaptor, Model DY-WL5 FCC ID: ACJ-DY-WL5 To Whom It May Concern: In accordance with provisions of Sections 0.457 and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for the below indicated exhibits. This transmitter is not user adjustable and does not have user tune-up procedure. These exhibits contain proprietary, confidential and/or trade secret materials, which would not be routinely made available for public inspection. • Schematic Diagram • Block Diagram Pursuant to DA 04-1705 of the commission’s public notice, we request short-term confidential treatment for the following information until April 15, 2012 in order to ensure sensitive business information remains confidential until the actual marketing of the device: • External Photographs • Internal Photographs • Test Setup Photographs • User Manual (or sometimes known as Operation Instructions or Operational Description) The above materials contain trade secrets and proprietary information not customarily released to the general public. Since this design is a basis from which future technological products will evolve, the public disclosure of these materials can be harmful to the Applicant by providing unfair advantage and benefits to its competitors. Thank you for your attention to this matter. Sincerely, Richard Mullen Richard Mullen Group Manager Product Safety & Compliance Division

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] RICHARD MULLEN Group Manager Product Safety and Compliance Division Power of Attorney January 12, 2012 AVG-11-U097 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To Whom It May Concern: Panasonic Corporation of North America hereby authorizes Bureau Veritas Consumer Products Services (H.K) Ltd., Taoyuan Branch. of Taiwan to act on our behalf for a one year period from the date of this letter. Any and all acts carried out by them on our behalf shall have the same effects as acts of our own. Product Name: Panasonic Wireless LAN Adaptor, Model DY-WL5 FCC ID: ACJ-DY-WL5 FCC Rule Part/Type Equip: FCC Part 15C, Section 15.247 / Digital Transmission System Transmitter Specification: 2412~2462 MHz WLAN / IEEE 802.11b/g/n Conformity 1 Rated RF Output: Maximum Peak Conducted RF Output Power is 239.9 mW RF Exposure Evaluation: This transmitter is intended for portable operation in uncontrolled environments with no antenna-to-person’s body minimum spacing requirements. RF exposure evaluation is satisfied with measured SAR test data. Applicant & Grantee: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 FRN Number: 0003762242 We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. This Certification application has not been submitted to any other TCB for Certification. Thank you for your attention to this matter. Sincerely, Richard Mullen Richard Mullen Group Manager Product Safety & Compliance Division 1 This transmitter complies with IEEE 802.11 (b+g+n) specifications and is intended for exclusive use with Panasonic audio/video products that are provided with WLAN compatibility for use in portable configuration with no minimum spacing requirements between antenna-to-user and the provided Operating Instruction will be provided with required RF Exposure Warning information. Further, this transmitter with USB 2.0 interface will not be marketed for connection to host PC and therefore, is not subject to DoC authorization under FCC Part 15B.

Report No.: RE111207E02 1 CONSTRUCTION PHOTOS OF EUT Model: DY-WL5 Report No.: RE111207E02 2

Scale: 1:1 11.09.19 AnnieHuang AnnieHuang Sunnywu PTT label(for Dongle1 MP1) 50#white mylar+25# matte PET T77H350.00 500.01381.005 Note: Note: 1. Surface material: 50# white Mylar+25# matte PET thickness: 50# white Mylar: 0.05+/-0.005mm 25# transparent PET:0.025+/-0.004mm 2. Adhesive: Acrylic thickness: 50# white Mylar:0.023+/-0.002mm 25# ransparent PET:0.018+/-0.002mm 3. Liner: Glassine 4.Printing color: Background:Black v IC:216A-DYWL5 FCC ID:ACJ-DY-WL5 Panasonic Corporation WIRELESS LAN ADAPTOR/ ADAPTATEUR DE RESEAU LOCAL SANS FIL Model No./Nde Modele: DY-WL5 Made in China/Fabrique au China IC:216A-DYWL5 FCC ID:ACJ-DY-WL5 Panasonic Corporation WIRELESS LAN ADAPTOR/ ADAPTATEUR DE RESEAU LOCAL SANS FIL Model No./Nde Modele: DY-WL5 Made in China/Fabrique au China IC:216A-DYWL5 FCC ID:ACJ-DY-WL5 Panasonic Corporation WIRELESS LAN ADAPTOR/ ADAPTATEUR DE RESEAU LOCAL SANS FIL Model No./Nde Modele: DY-WL5 Made in China/Fabrique au China IC:216A-DYWL5 FCC ID:ACJ-DY-WL5 Panasonic Corporation WIRELESS LAN ADAPTOR/ ADAPTATEUR DE RESEAU LOCAL SANS FIL Model No./Nde Modele: DY-WL5 Made in China/Fabrique au China 11.10.21 AnnieHuang 17 reduce font size

(Fig. 1) FCC ID: ACJ-DY-WL5 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label

Report No.: RE111207E02 3 Model: DY-WL5 Report No.: RE111207E02 4

FCC SAR Test Report Report Format Version 4.1.0 Page No. : 1 of 19 Report No. : SA111207E02 Issued Date : Jan. 16, 2012 Revision : R01 FCC SAR Test Report Report No. : SA111207E02 Applicant : Panasonic Corporation of North America Address : ONE PANASONIC WAY, 4B-8, SECAUCUS, NEW JERSEY, UNITED STATES, 07094 Product : WIRELESS LAN ADAPTOR FCC ID : ACJ-DY-WL5 Brand : Panasonic Model No. : DY-WL5 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1991 / IEEE 1528:2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) KDB 248227 D01 v01r02 / KDB 447498 D01 v04 / KDB 447498 D02 v02 Date of Testing : Jan. 11, 2012 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch - Taiwan HwaYa Lab, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. This test report consists of 19 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Prepared By : Pettie Chen / Specialist Approved By : Roy Wu / Manager FCC SAR Test Report Report Format Version 4.1.0 Page No. : 2 of 19 Report No. : SA111207E02 Issued Date : Jan. 16, 2012 Revision : R01 Table of Contents Release Control Record............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR)................................................................................................................ 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder................................................................................................................................................... 10 3.2.6 System Validation Dipoles................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 12 3.4 SAR Measurement Procedure ................................................................................................................................... 13 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 13 3.4.2 Volume Scan Procedure................................................................................................................................... 13 3.4.3 Power Drift Monitoring...................................................................................................................................... 13 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 14 3.4.5 SAR Averaged Methods................................................................................................................................... 14 4. SAR Measurement Evaluation ............................................................................................................................................ 15 4.1 EUT Configuration and Setting................................................................................................................................... 15 4.2 EUT Testing Position .................................................................................................................................................. 15 4.3 Tissue Verification ...................................................................................................................................................... 15 4.4 System Verification..................................................................................................................................................... 16 4.5 Conducted Power Results.........................................…

Text truncated - open the document above for the full version.

Report No.: RF111207E02 1 Report Format Version 4.1.0 FCC TEST REPORT REPORT NO.: RF111207E02 MODEL NO.: DY-WL5 FCC ID: ACJ-DY-WL5 RECEIVED: Dec. 08, 2011 TESTED: Dec. 13 to 15, 2011 ISSUED: Jan. 09, 2012 APPLICANT: Panasonic Corporation of North America ADDRESS: One Panasonic Way, 4B-8, Secaucus, New Jersey, United States, 07094 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 49 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF111207E02 2 Report Format Version 4.1.0 Table of Contents RELEASE CONTROL RECORD........................................................................................4 1. CERTIFICATION....................................................................................................5 2. SUMMARY OF TEST RESULTS............................................................................6 2.1 MEASUREMENT UNCERTAINTY..........................................................................6 3. GENERAL INFORMATION.....................................................................................7 3.1 GENERAL DESCRIPTION OF EUT.......................................................................7 3.2 DESCRIPTION OF TEST MODES.........................................................................8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST.....................................................9 3.2.2 DESCRIPTION OF SUPPORT UNITS..................................................................10 3.2.3 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL........................11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.......................................13 4. TEST TYPES AND RESULTS..............................................................................14 4.1 CONDUCTED EMISSION MEASUREMENT........................................................14 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT......................................14 4.1.2 TEST INSTRUMENTS..........................................................................................14 4.1.3 TEST PROCEDURES..........................................................................................15 4.1.4 DEVIATION FROM TEST STANDARD.................................................................15 4.1.5 TEST SETUP.......................................................................................................16 4.1.6 EUT OPERATING CONDITIONS.........................................................................16 4.1.7 TEST RESULTS...................................................................................................17 4.2 RADIATED EMISSION and bandedge MEASUREMENT.....................................19 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT..............19 4.2.2 TEST INSTRUMENTS..........................................................................................20 4.2.3 TEST PROCEDURES..........................................................................................21 4.2.4 DEVIATION FROM TEST STANDARD.................................................................21 4.2.5 TEST SETUP.......................................................................................................22 4.2.6 EUT OPERATING CONDITIONS.........................................................................22 4.2.7 TEST RESULTS...................................................................................................23 4.3 6dB BANDWIDTH MEASUREMENT....................................................................36 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT..................................................36 4.3.2 TEST INSTRUMENTS..........................................................................................36 4.3.3 TEST PROCEDURE.............................................................................................36 4.3.4 DEVIATION FROM TEST STANDARD.................................................................36 4.3.5 TEST SETUP.......................................................................................................36 4.3.6 EUT OPERATING CONDITIONS.........................................................................36 4.3.7 TEST RESULTS...................................................................................................37 4.4 CONDUCTED OUTPUT POWER.........................................................................38 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT.....................38 4.4.2 INSTRUMENTS....................................................................................................38 4.4.3 TEST PROCEDURES..........................................................................................38 Report No.: RF111207E02 3 Report Format Version 4.1.0 4.4.4 DEVIATION FROM TEST STANDARD.................................................................38 4.4.5 TEST SETUP.......................................................................................................38 4.4.6 EUT OPERATING CONDITIONS.........................................................................38 4.4.7 TEST RESULTS...................................................................................................39 4.5 POWER SPECTRAL DENSITY MEASUREMENT...…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST

FCC SAR Test Report Report Format Version 4.1.0 Issued Date : Jan. 16, 2012 Report No. : SA111207E02 Revision : R01 Appendix D. Photographs of EUT and Setup FCC SAR Test Report Report Format Version 4.1.0 Report No. : SA111207E02 Revision : R01 <Photographs of EUT> <Location of Antennas> WWAN Antenna FCC SAR Test Report Report Format Version 4.1.0 Report No. : SA111207E02 Revision : R01 <Photographs of SAR Setup> Horizontal Up with 0.5 cm Gap Horizontal Down with 0.5 cm Gap Vertical Front with 0.5 cm Gap Vertical Back with 0.5 cm Gap Tip Mode with 0.5 cm Gap