ACJ-JT-B1APAAZAMWTablet PC

Read Me First Getting Started Useful Information Troubleshooting Appendix A1 A2 A3 Please read these instructions carefully before using this product, and save this manual for future use. OPERATING INSTRUCTIONS Tablet Computer Model No. JT-B1series Contents Read Me First Safety Precautions ..............................................2 Regulatory Information ........................................8 Getting Started Description of Parts ...........................................14 First-time Operation ...........................................18 Turning On/Off and Sleeping/Waking Up ..........22 Input Operation ..................................................23 Exchanging the battery ......................................24 Useful Information Handling and Maintenance ................................26 Appendix Specifications ....................................................28 For further information about this computer, you can refer to the on-screen manual by performing the following steps. Touch -[ OnlineManual]. When more than one onscreen manuals are prepared, name of those manuals are listed in above step. Touch a manual to access from the list. JT-B1_eng(PGQX)_申請用20121220.indd 12012/12/20 17:30:01 Read Me First 2 Safety Precautions To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbol word panels The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. DANGER Denotes a potential hazard that will result in serious injury or death. WARNING Denotes a potential hazard that could result in serious injury or death. CAUTION Denotes a hazard that could result in minor injury. NOTICE Denotes a hazard that could result in property damage. The following symbols are used to classify and describe the type of instructions to be observed. This symbol is used to alert users to a specific operating procedure that must not be performed.。 This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safety. JT-B1_eng(PGQX)_申請用20121220.indd 22012/12/20 17:30:02 Read Me First 3 ■ About Tablet DANGER Do Not Charge the Battery Using Methods Other Than Those Specified If the battery is not charged using one of the specified methods, electrolyte leakage, generation of heat, ignition or rupture of the battery may result. Do Not Throw the Product Into a Fire or Expose It to Excessive Heat Generation of heat, ignition or rupture of the battery may result. Use Dedicated AC Adapter （JT-B1-AD000U) Generation of heatmignition or rupture of the battery may result. WARNING If a Malfunction or Trouble Occurs, Immediately Stop Use If a Malfunction Occurs, Immediately Unplug the AC Plug yy This product is damaged yy Foreign object is inside this product yy Smoke emitted yy Unusual smell emitted yy Unusually hot yy Continuing to use this product while any of the above conditions are present may result in fire or electric shock. yy If a malfunction or trouble occurs, immediately turn the power off and unplug the AC plug. Then contact your technical support office for repair. Do Not Disassemble This Product You may receive an electric shock, or foreign matter may enter and result in a fire. Keep SIM Cards Away from Infants and Small Children Accidental swallowing will result in bodily injury. pp In the event of accidental swallowing, see a doctor immediately. JT-B1_eng(PGQX)_申請用20121220.indd 32012/12/20 17:30:04 Read Me First 4 Safety Precautions Close the Connector Cover Tightly When Using This Product Where Is a Lot of Water, Moisture, Steam, Dust, Oily Vapors, etc. The entry of foreign matter may cause a fire or electric shocks. pp If foreign matter has found its way inside, immediately turn the power off and unplug the AC cord. Then contact your technical support office. Do not put any foreign objects into the product. Fire or electric shock may result. Do Not Touch This Product and Cable When It Starts Thundering Electric shock may result. Keep microSD Memory Cards Away from Infants and Small Children Accidental swallowing will result in bodily injury. pp In the event of accidental swallowing, see a doctor immediately. Do Not Turn the Volume Up To Loud When Using Headphones Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing. Do Not Use With Exposing the Skin To This Product For a Long Period of Time Using this product with exposing the skin to the heat source of this product or AC adaptor for a long period of time can cause a low-temperature burn. CAUTION Do Not Place This Product on Unstable Surfaces If balance is lost, this product may fall over or drop, resulting in an injury. Take a Break Of 10-15 Minutes Every Hour Using this product for long periods of time may have detrimental health effects on the eyes or hands. Do Not Move This Product While the AC Plug Is Connected The AC cord may be damaged, resulting in fire or electric shock. pp If the AC cord is damaged, unplug the AC plug immediately. Avoid Stacking If balance is lost, this product may fall over or drop, resulting in an injury. Do Not Leave This Product in High Temperature Environment for a Long Period of Time Leaving this product where it will be exposed to extremely high temperatures such as near fire or in direct sunlight may deform the cabinet and/or cause trouble in the internal parts. Continued use in such a resulting condition may lead to short-circuiting or insulation defects, etc. which may in turn lead to a fire or electric shocks. JT-B1_eng(PGQX)_申請用20121220.indd 42012/12/20 17:30:05 Read Me First 5 Do Not Expose the Skin To This Product When Using the Product In A Hot Or Cold Environment Burns, low-temperature burns, or frostbite may result. pp When it is nece…

Text truncated - open the document above for the full version.

One Panasonic Way, 4B-8, Secaucus, New Jersey, United States 07094 Declaration for DFS client devices December 27, 2012 Dear Examiner: Per KDB# 848637, We, Panasonic Corporation of North America, declare that following description truly represent our product in consideration (FCC ID: ACJ-JT-B1APAAZAMW). Please do not hesitate to contact us, if further info is required. Thanks. a). A channel/frequency plan for the device showing the channels that have active scanning or passive scanning. Active scanning is where the device can transmit a probe (beacon) and passive scanning is where the device can listen only without probes. Below is the channel / frequency plan for the device CH 1 2 3 4 5 6 7 8 9 10 11 Frequency (MHz) 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 Scan Type Active Active Active Active Active Active Active Active Active Active Active CH 36 40 44 48 52 56 60 64 100 104 108 Frequency (MHz) 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 Scan Type Active Active Active Active Passive Passive Passive Passive Passive Passive Passive CH 112 116 132 136 140 Frequency (MHz) 5560 5580 5660 5680 5700 Scan Type Passive Passive Passive Passive Passive One Panasonic Way, 4B-8, Secaucus, New Jersey, United States 07094 b). For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) or in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies), or modular devices that configure the modes of operations through software; the applicant must provide in the application software and operations description that discuss how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by an end user or an installer. Also, include an attestation that the device complies with the requirements for software configuration control as discussed in KDB #594280. On DFS channels, the WLAN driver on the device operates under the control of an AP at all times, except when in ad-hoc mode, on US non-DFS channels. The device passively scans DFS frequencies until a master device is detected. The control of this functionality is not accessible to anyone under any conditions. Furthermore, the firmware is locked by proprietary password and cannot be changed or modified by end user. If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! _________________________ Daniel Lee Vice President, MPTC II Bureau Veritas ADT Tel: +886-3-318-3232 Ext. 1857 E-mail: [email protected]

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] RICHARD MULLEN Group Manager Product Safety and Compliance Division FCC ID & FCC Logo Label Location December 20, 2012 PSN-MSBU-12-F01 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Original Certification Application for Panasonic Tough Pad Tablet, Basic Model JT-B1APAAZAM FCC ID: ACJ-JT-B1APAAZAMW Contains Transmitters • NXP/Philips RFID Model PN544 • TI’s WLAN/BT/GPS Combo Model WL1283 To whom it may concern: We, Panasonic Corporation of North America, state that there is no outer enclosure space for putting the product label with FCC Logo 2 and FCC ID: ACJ-JT-B1APAAZAMW. As such, we intend to place this required product label in the battery compartment, located beneath where the batteries will be installed. This product label will be visible to the users upon purchase as the batteries will not yet be installed. If you have any question regarding the declaration, please don’t hesitate to contact us. Sincerely yours, Richard Mullen Richard Mullen Group Manager Product Safety & Compliance Division 2 This product is also authorized under Declaration of Conformity in compliance with FCC Part 15, Subpart B.

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] RICHARD MULLEN Group Manager Product Safety and Compliance Division WLAN/BT Product Declaration & Declaration December 17, 2012 PSN-MSBU-12-F01 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Original Certification Application for Panasonic Tough Pad Tablet, Basic Model JT-B1APAAZAM FCC ID: ACJ-JT-B1APAAZAMW Contains Transmitters • NXP/Philips RFID Model PN544 • TI’s WLAN/BT/GPS Combo Model WL1283 To whom it may concern: WLAN/BT Combination Declaration: Panasonic Tough Pad Tablet, Model JT-B1APAAZAM uses WLAN/Bluetooth combination antenna. This WLAN/Bluetooth co-existence mechanism is to ensure that the WLAN and Bluetooth transmitters would not simultaneously operate. Therefore, WLAN and Bluetooth antenna in this system should not be considered to be able to transmit simultaneously. Although the users can use WLAN and Bluetooth simultaneously, but the real situation is that WLAN and Bluetooth are used by time sharing and no overlap transmission. Moreover, for 2.4 GHz part of this device, only channels 1~11 will be used in North America and bands of 802.11 b/g/n channels 12~13, non-US frequency, are disabled. Country code selection is also disabled. Declaration for DFS client devices: We declare the employed WLAN, with Part 15E Unlicensed National Information Infrastructure) does not support any non-US channels in all the operational mode(s), like ad-hoc...etc, for the subject product. Also, the client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restriction on transmissions for beacons and support for ad-hoc peer-to-peer modes. This product disable ad-hoc and personal hotspot function for 5250~5350 MHz and 5470~5725MHz that software and associated drivers will not initiate any transmission on DFS frequencies and the device does not support radar detection capability. This includes transmission for become ad-hoc peer to peer modes. Sincerely yours, Richard Mullen Richard Mullen Group Manager Product Safety & Compliance Division

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] RICHARD MULLEN Group Manager Product Safety and Compliance Division Request for Confidentiality December 17, 2012 PSN-MSBU-12-F01 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Original Certification Application for Panasonic Tough Pad Tablet, Basic Model JT-B1APAAZAM FCC ID: ACJ-JT-B1APAAZAMW Contains Transmitters • NXP/Philips RFID Model PN544 • TI’s WLAN/BT/GPS Combo Model WL1283 To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as permanent confidential document from public disclosure. • Schematic Diagram • Block Diagram • Parts List • Operational Description • Operational Description for Antenna Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In addition, please be advised that Panasonic Corporation of North America hereby requests the following filed sensitive information to be held under short-term confidential, pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s Rules and the provisions in FCC Public DA 04-1705. We request temporarily confidentiality of forty-five days 1 , starting from the original issued Certification grant date. • External Photographs • Internal Photographs • Test Setup Photographs • Users Manual Sincerely yours, Richard Mullen Richard Mullen Group Manager Product Safety & Compliance Division 1 Request for short-term confidentiality is limited to 45 days and request for up to 180 days would require additional request after passage of prior request(s).

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] RICHARD MULLEN Group Manager Product Safety and Compliance Division Power of Authorization Letter December 17, 2012 PSN-MSBU-12-F01 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Original Certification Application for Panasonic Tough Pad Tablet, Basic Model JT-B1APAAZAM FCC ID: ACJ-JT-B1APAAZAMW Contains Transmitters • NXP/Philips RFID Model PN544 • TI’s WLAN/BT/GPS Combo Model WL1283 To whom it may concern: Please be notified that I, Richard Mullen, designated Daniel Lee of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Daniel Lee of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan on the matters relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. As defined in 47 CFR Ch. 1.2002 (b), we further certify that neither the applicant nor any party to this application is subject to a denial to Federal benefits, including FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This authorization is valid for one year period from the date of this letter and is limited to FCC Parts 15C and 15E Certification under FCC ID: ACJ-JT-B1APAAZAMW. The equipment’s Class B Computer Device portion will be authorized Declaration of Conformity in compliance with FCC Part 15B. This application for equipment approval has not been submitted to another TCB for certification. If you have any acknowledgement and response, please send it to Daniel Lee of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan directly. Sincerely yours, Richard Mullen Richard Mullen Group Manager Product Safety & Compliance Division Cc: Hitoshi Yoshida / Kunihiko Sakaibara / PSN-MSBU Takashi Ikeda / PMC-MTBU

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 22 Report No. : SA121017C16 Issued Date : Dec. 19, 2012 Revision : R01 FCC SAR Test Report Report No. : SA121017C16 Applicant : Panasonic Corporation of North America Address : ONE PANASONIC WAY, 4B-8, SECAUCUS, NEW JERSEY, UNITED STATES 07094 Product : Tablet PC FCC ID : ACJ-JT-B1APAAZAMW Brand : Panasonic Model No. : JT-B1APAAZAM Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1991 / IEEE 1528:2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) KDB 248227 D01 v01r02 / KDB 447498 D01 v04 Date of Testing : Nov. 15, 2012 ~ Nov. 17, 2012 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch - Taiwan HwaYa Lab, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Evonne Liu / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 22 Report No. : SA121017C16 Issued Date : Dec. 19, 2012 Revision : R01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ................................................................................................................ 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 12 3.4 SAR Measurement Procedure ................................................................................................................................... 13 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 13 3.4.2 Volume Scan Procedure................................................................................................................................... 13 3.4.3 Power Drift Monitoring ...................................................................................................................................... 13 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 14 3.4.5 SAR Averaged Methods ............…

Text truncated - open the document above for the full version.

Report No.: RF121017C16 1 of 67 Report Format Version 5.0.0 FCC TEST REPORT (BLUETOOTH) REPORT NO.: RF121017C16 MODEL NO.: JT-B1APAAZAM FCC ID: ACJ-JT-B1APAAZAMW RECEIVED: Oct. 17, 2012 TESTED: Oct. 25 ~ Nov. 13, 2012 ISSUED: Dec. 11, 2012 APPLICANT: Panasonic Corporation of North America ADDRESS: One Panasonic way,4B-8,Secaucus,New Jersey,United states 07094 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF121017C16 2 of 67 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD ........................................................................................ 5 1. CERTIFICATION ..................................................................................................... 6 2. SUMMARY OF TEST RESULTS ............................................................................. 7 2.1 MEASUREMENT UNCERTAINTY .......................................................................... 8 3. GENERAL INFORMATION ..................................................................................... 9 3.1 GENERAL DESCRIPTION OF EUT ........................................................................ 9 3.2 DESCRIPTION OF TEST MODES........................................................................ 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL......................... 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 14 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................. 15 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 15 4. TEST TYPES AND RESULTS (FOR BLUETOOTH EDR) ..................................... 16 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 16 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 16 4.1.2 TEST INSTRUMENTS .......................................................................................... 17 4.1.3 TEST PROCEDURES .......................................................................................... 18 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 18 4.1.5 TEST SETUP ........................................................................................................ 19 4.1.6 EUT OPERATING CONDITIONS .......................................................................... 19 4.1.7 TEST RESULTS ................................................................................................... 20 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................ 27 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................... 27 4.2.2 TEST INSTRUMENTS .......................................................................................... 27 4.2.3 TEST PROCEDURES .......................................................................................... 28 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 28 4.2.5 TEST SETUP ........................................................................................................ 29 4.2.6 EUT OPERATING CONDITIONS .......................................................................... 29 4.2.7 TEST RESULTS ................................................................................................... 30 4.3 NUMBER OF HOPPING FREQUENCY USED ..................................................... 32 4.3.1 LIMIT OF HOPPING FREQUENCY USED ........................................................... 32 4.3.2 TEST SETUP ........................................................................................................ 32 4.3.3 TEST INSTRUMENTS .......................................................................................... 32 4.3.4 TEST PROCEDURES .......................................................................................... 32 4.3.5 DEVIATION FROM TEST STANDARD ................................................................. 32 4.3.6 TEST RESULTS ................................................................................................... 32 4.4 DWELL TIME ON EACH CHANNEL ..................................................................... 34 4.4.1 LIMIT OF DWELL TIME USED ....…

Text truncated - open the document above for the full version.

Report No.: RF121017C16-4 1 of 23 Report Format Version 5.0.0 DFS TEST REPORT REPORT NO.: RF121017C16-4 MODEL NO.: JT-B1APAAZAM FCC ID: ACJ-JT-B1APAAZAMW RECEIVED: Oct. 17, 2012 TESTED: Nov. 06 ~ Nov. 15, 2012 ISSUED: Dec. 11, 2012 APPLICANT: Panasonic Corporation of North America ADDRESS: One Panasonic way,4B-8,Secaucus,New Jersey,United states 07094 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by yo…

Text truncated - open the document above for the full version.