ACJ-SB-NE5Wireless Speaker System

VQT4U49 until 2013/1/17 ENGLISH ESPAÑOL Owner’s Manual Wireless Speaker System Model No. SC-NE3 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. If you have any questions, contact: U.S.A. and Puerto Rico: 1-800-211-PANA (7262) Canada: 1-800-561-5505 Register online at www.panasonic.com/register (U.S. customers only) Included Installation Instructions (l2, 3 and 18, 19) The installation work should be done by a qualified installation specialist. Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. (Please keep these instructions. You may need them when maintaining or moving this unit.) La referencia rápida en español se puede encontrar en la página 20. P PC SC-NE3_PPC~VQT4U49.book 1 ページ ２０１３年１月９日 水曜日 午後９時７分 2 VQT4U49 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1Read these instructions. 2Keep these instructions. 3Heed all warnings. 4Follow all instructions. 5Do not use this apparatus near water. 6Clean only with dry cloth. 7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Unit ≥To reduce the risk of fire, electric shock or product damage, – Do not expose this unit to rain, moisture, dripping or splashing. – Do not place objects filled with liquids, such as vases, on this unit. – Use only the recommended accessories. – Do not remove covers. – Do not repair this unit by yourself. Refer servicing to qualified service personnel. AC power supply cord ≥The power plug is the disconnecting device. Install this unit so that the power plug can be unplugged from the socket outlet immediately. Button-type battery (Lithium battery) ≥Risk of fire, explosion and burns. Do not disassemble, heat above 60oC (140 o F) or incinerate. Unit ≥Do not place sources of naked flames, such as lighted candles, on this unit. Placement ≥To reduce the risk of fire, electric shock or product damage, – Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. – Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. Button-type battery (Lithium battery) ≥Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. ≥Keep out of reach of children. ≥Insert with poles aligned. ≥Mishandling of batteries can cause electrolyte leakage and may cause a fire. – Remove batteries if you do not intend to use the remote control for a long period of time. Store in a cool, dark place. – Do not heat or expose to flame. – Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. – Do not touch the terminals (i and j) with metal objects. – Do not recharge, disassemble, remodel, heat or throw into fire. ≥When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. WARNING DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD This product contains a coin/button cell battery. If the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor. <For USA-California only> This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material s special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. CAUTION SC-NE3_PPC~VQT4U49.book 2 ページ ２０１３年１月９日 水曜日 午後９時７分 3 VQT4U49 ENGLISH -If you see this symbol- Table of contents IMPORTANT SAFETY INSTRUCTIONS ............ 2 Accessories ....................................................... 4 Unit care............................................................. 4 About Bluetooth ® ............…

Text truncated - open the document above for the full version.

13 VQT4U49 Sound adjustment The following sound effects can be added to the audio output. 1Press [SOUND] repeatedly to select the effect. 2Press [3,4] to select the setting and then press [OK]. ≥You may experience a reduction in sound quality when these effects are used with some sources. If this occurs, turn the sound effects off. Others The sleep timer can turn the unit off after a set time. 1Press [SETUP] to select “SLEEP”. 2Press [3,4] to set the time (in minutes) and then press [OK]. “SLEEP 30” ,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP 120” ^---------------------. “OFF” (Cancel) (----------------------J ≥The remaining time is indicated on the unit’s display except when other operations are performed. The brightness of this unit’s display can be changed. 1Press [SETUP] repeatedly to select “DIMMER”. 2Press [3,4] to select “ON” and then press [OK]. ≥To cancel the dimmer, select “OFF” in step 2. As a factory preset, this unit will always turn off automatically if there is no sound output and no operation for approx. 30 minutes. To cancel this function 1Press [SETUP] repeatedly to select “AUTO OFF”. 2Press [3,4] to select “OFF” and then press [OK]. ≥To turn automatic standby on, select “ON” in step 2. ≥When connected to a Bluetooth ® device, the automatic standby function does not work. To check the Wi-Fi signal strength where the unit is located. Preparation Connect this unit to the wireless network. (l7) 1Press [SETUP] repeatedly to select “SIG.LEVEL” and then press [OK]. ≥The unit’s display shows “LEVEL ”. (“  ” stands for a number.) 2Press [OK] to exit this display mode. ≥It is recommended to have a signal strength of “3”. Change the position or angle of your wireless network router or the unit if the indication is “2” or “1” and see if the connection improves. ≥If “LEVEL 0” is displayed, this unit cannot establish a link with the wireless network router. (l16) ≥This function does not work when “D.CONNECT” is set to “ON”. This unit can turn on automatically from standby mode when this unit is selected as the AirPlay speakers. Preparation Connect this unit to the wireless network. (l7) 1Press [SETUP] repeatedly to select “NET STNBY” and then press [OK]. 2Press [3,4] to select “ON” and then press [OK]. ≥To cancel this function, select “OFF” in step 2. ≥The factory preset is “OFF”. If this function is set to “ON” the standby power consumption will increase. Direct-Vocal Surround (D.SURROUND) “LEVEL 1”, “LEVEL 2” or “OFF”. ≥The factory preset is “OFF”. Preset EQ (PRESET EQ) “HEAVY” (heavy), “SOFT” (soft), “CLEAR” (clear), “VOCAL” (vocal) or “FLAT” (flat/off). ≥The factory preset is “HEAVY”. Bass (BASS) or Treble (TREBLE) Adjust the level (j4 to i4). Dynamic Bass (D.BASS) “ON D.BASS” or “OFF D.BASS”. ≥The factory preset is “ON D.BASS”. Sleep timer Display brightness Automatic standby Wi-Fi ® signal strength Network standby SC-NE3_PPC~VQT4U49.book 13 ページ ２０１３年１月９日 水曜日 午後９時７分 14 VQT4U49 Occasionally, Panasonic may release updated software for this unit that may add or improve the way a feature operates. These updates are available free of charge. Preparation ≥Turn the unit on. ≥Connect this unit to the wireless network. (l7) – Make sure that the wireless network is connected to the Internet. – If “D.CONNECT” is set to “ON”, change the setting to “OFF” and connect this unit to a wireless network that is connected to the Internet. 1Press [SETUP] repeatedly to select “SW UPDATE” and then press [OK]. 2Press [3,4] to select “UPDATE? Y” and then press [OK] to start the update. 3When the update has finished successfully, “SUCCESS” is displayed. 4Disconnect the AC power supply cord and reconnect it after 3 minutes. ≥Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment. ≥If you do not want to update the unit, select “UPDATE? N” and then press [OK] in step 2. ≥If there are no updates, “NO NEED” is displayed after step 2. ∫Checking the software version 1Press [SETUP] repeatedly to select “SW VER.” and then press [OK]. {.The version of the installed software is displayed. 2Press [OK] to exit. Display the name for the connected wireless network (SSID). 1Press and hold [– WPS] on the unit and [OK] on the remote control until the unit's display shows the SSID. 2Press [OK] to exit. ≥If “NOCONNECT” is displayed this unit is not connected to a wireless network. ≥All letters are displayed as capital letters, and characters that cannot be displayed are replaced with “ ¢”. To check the unit’s IP address or the Wi-Fi MAC address. 1Press and hold [– WPS] on the unit and [4] on the remote control until the unit’s display shows the IP address. {.The IP address is partially displayed. ≥To display the MAC address on the unit, repeat the steps above by replacing [4] with [3]. 2Press [3,4] on the remote control to show the rest of the IP address. ≥To exit the setting, wait 20 sec. ≥The “ – ” displayed on the top or bottom left of the display indicate the first and last units respectively. When other Panasonic equipment responds to the supplied remote control, change the remote control code. 1Press [ , AUX] to select “AUX”. 2While pressing and holding [ / AUX] on the unit, press and hold [SOUND] on the remote control until the unit’s display shows “REMOTE 2”. 3Press and hold [OK] and [SOUND] on the remote control for at least 4 seconds. ≥To change the mode back to “REMOTE 1”, repeat the steps above but replace the button pressed on the remote control from [SOUND] to [ , AUX]. Software update DO NOT DISCONNECT the AC power supply cord while one of the following messages is displayed. – “LINKING”, “UPDATING” or “%” (“  ” stands for a number.) ≥During the update process, no other operations can be performed. Wireless network name (SSID) IP/MAC Address Changing the unit and remote control code SC-NE3_PPC~VQT4U49.book 14 ページ ２０１３年１月９日 水曜日 午後９時７分 15 VQT4U49 Troubleshooting Before requesting service, make the following checks. If you are in doubt about…

Text truncated - open the document above for the full version.

VQT4U55 until 2013/03/01 ENGLISH ESPAÑOL Owner’s Manual Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. If you have any questions, contact: U.S.A. and Puerto Rico: 1-800-211-PANA (7262) Canada: 1-800-561-5505 Register online at www.panasonic.com/register (U.S. customers only) Wireless Speaker System Model No. SC-NE5 Included Installation Instructions (l2, 3 and 26, 27) The installation work should be done by a qualified installation specialist. Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. (Please keep these instructions. You may need them when maintaining or moving this system.) La referencia rápida en español se puede encontrar en la página 29. PP PPC_SC-NE5~VQT4U55.book 1 ページ ２０１３年１月１７日 木曜日 午前１１時７分 2 VQT4U55 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1Read these instructions. 2Keep these instructions. 3Heed all warnings. 4Follow all instructions. 5Do not use this apparatus near water. 6Clean only with dry cloth. 7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Unit ≥To reduce the risk of fire, electric shock or product damage, – Do not expose this unit to rain, moisture, dripping or splashing. – Do not place objects filled with liquids, such as vases, on this unit. – Use only the recommended accessories. – Do not remove covers. – Do not repair this unit by yourself. Refer servicing to qualified service personnel. AC power supply cord ≥The power plug is the disconnecting device. Install this unit so that the power plug can be unplugged from the socket outlet immediately. Button-type battery (Lithium battery) ≥Risk of fire, explosion and burns. Do not disassemble, heat above 60oC (140 o F) or incinerate. Unit ≥This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ≥Do not place sources of naked flames, such as lighted candles, on this unit. Placement ≥To reduce the risk of fire, electric shock or product damage, – Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. – Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. ≥Keep your speakers at least 10 mm ( 13 /32q) away from the system for proper ventilation. Button-type battery (Lithium battery) ≥Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. ≥Keep out of reach of children. ≥Insert with poles aligned. ≥Mishandling of batteries can cause electrolyte leakage and may cause a fire. – Remove batteries if you do not intend to use the remote control for a long period of time. Store in a cool, dark place. – Do not heat or expose to flame. – Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. – Do not touch the terminals (i and j) with metal objects. – Do not recharge, disassemble, remodel, heat or throw into fire. ≥When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. WARNING DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD This product contains a coin/button cell battery. If the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor. <For USA-California only> This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material s special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. CAUTION PPC_SC-NE5~VQT4U55.book 2 ページ ２０１３年１月１７日 木曜日 午前１１時７分 3 VQT4U55 ENGLIS…

Text truncated - open the document above for the full version.

17 VQT4U55 ENGLISH About Bluetooth ® ∫Frequency band used ≥This system uses the 2.4 GHz frequency band. ∫Certification of this device ≥This system conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. ≥The actions below are punishable by law in some countries: – Taking apart or modifying this system. – Removing specification indications. ∫Restrictions of use ≥Wireless transmission and/or usage with all Bluetooth ® equipped devices is not guaranteed. ≥All devices must conform to standards set by Bluetooth SIG, Inc. ≥Depending on the specifications and settings of a device, it can fail to connect or some operations can be different. ≥This system supports Bluetooth ® security features. But depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this system with caution. ≥This system cannot transmit data to a Bluetooth ® device. ∫Range of use ≥Use this device at a maximum range of 10 m (33 ft). The range can decrease depending on the environment, obstacles or interference. ∫Interference from other devices ≥This system may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if this system is located too close to other Bluetooth ® devices or the devices that use the 2.4 GHz band. ≥This system may not function properly if radio waves from a nearby broadcasting station, etc. is too strong. ∫Intended usage ≥This system is for normal, general use only. ≥Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc). Media playback operations The following marks indicate the availability of the feature. Preparation ≥Turn this system on. ≥Insert the media (l9) or connect the Bluetooth ® (l16) / AirPlay (l14) compatible device. ≥Press [CD/RADIO], [iPod] or [ , AUX] to select the audio source. ≥When using iPod/iPhone/iPad, the operation may vary among those models. [CD]To display information Press [DISPLAY, iPod MENU] repeatedly. Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. [CD] :CD audio in CD-DA format (l5) [iPod] :Compatible iPod/iPhone/iPad (l5) [AirPlay] :When connected to an AirPlay compatible device. (l14) [Bluetooth] : Connected Bluetooth ® device (l16) Basic play ( [CD], [iPod], [AirPlay], [Bluetooth]) PlayPress [1/;]. StopPress [∫]. PausePress [1/;]. Press again to restart play. SkipPress [:/6] or [5/9] to skip track. Search (Except [AirPlay]) During play or pause Press and hold [:/6] or [5/9]. ≥Point the remote control at the CD unit to operate. ≥ [iPod] : Backwards search is only within the current track. PPC_SC-NE5~VQT4U55.book 17 ページ ２０１３年１月１７日 木曜日 午前１１時７分 18 VQT4U55 ≥To use this system’s remote control with a Bluetooth ® device, the Bluetooth ® device must support AVRCP (Audio Video Remote Control Profile). Depending on the device or the status of the device, some operations may not work. ≥Maximum number of displayable characters: approx. 30 ≥This system supports ver. 1.0, 1.1 and 2.3 ID3 tags. Text data that is not supported will not be displayed or shown differently. ∫[iPod] To navigate through the iPod/ iPhone menu ≥Open the Music App to use this feature with iPod touch/ iPhone. –[3,4] : To navigate menu items. – [OK] : To go to the next menu. – [DISPLAY, iPod MENU] : To return to the previous menu. ≥Depending on the model (e.g., iPod nano 7th generation, etc.), it may be necessary to select the album, artist, etc. on the iPod/iPhone/iPad. Select the playback mode. 1Press [PLAY MENU] to select “REPEAT” or “RANDOM” / “SHUFFLE”. 2Press [3,4] to select the setting and then press [OK]. ≥When using an iPod/iPhone/iPad or Bluetooth ® device, use the setting on the device, if available. ≥During random play, you cannot skip to the previous track. ≥ [CD] : The mode is canceled when you open the door for discs. [AirPlay] : The applied settings will remain until it is changed. *1:[AirPlay] : Perform the settings during playback. Playback modes ([CD], [AirPlay]* 1 ) REPEAT [CD] OFFSelect to cancel repeat playback. 1-TRACKOnly plays the selected track. ≥“1, , `” is displayed. (Skip to the desired track.) ALLAll tracks are repeated. ≥“`” is displayed. [AirPlay] Refer to the connected device to verify the selected setting. [CD] RANDOM ONPlays the contents randomly. ≥“RND” is displayed. ≥“RND” will not be displayed when “1-TRACK” is selected. OFFRandom playback is turned off. [AirPlay] SHUFFLE Refer to the connected device to verify the selected setting. PPC_SC-NE5~VQT4U55.book 18 ページ ２０１３年１月１７日 木曜日 午前１１時７分 19 VQT4U55 ENGLISH Listening to the radio You can preset up to 30 channels. Preparation ≥Make sure that the FM antenna is connected. (l8) ≥Turn this system on. ≥Press [CD/RADIO] to select “FM”. ≥A station previously stored is overwritten when another station is stored in the same channel preset. 1Press [PLAY MENU] to select “A.PRESET”. 2Press [3,4] to select “LOWEST” or “CURRENT” and then press [OK]. LOWEST: To begin auto preset with the lowest frequency (FM 87.9 or FM 87.5). CURRENT: To begin auto preset with the current frequency.* * To change the frequency, refer to “Manual tuning and presetting”. The tuner starts to preset all the stations it can receive into the channels in ascending order. Preparation 1Press [PLAY MENU] repeatedly to select “TUNEMODE”. 2Press [3,4] to select “PRESET” and then press [OK]. Press [:/6] or [5/9] to select the channel. ∫Manual tuning and presetting Select a radio broadcast. 1Press [PLAY MENU] repeatedly to select “TUNEMODE”. 2Press [3,4] to select “MANUAL” and then press [OK]. 3Press [:/6] or [5/9] to tune to the required station. ≥To start automatic tuning, press and hold [:/6], [5/9] until the frequency starts scrolling. Tuning stops when a station is found. To preset the channel 4While listening…

Text truncated - open the document above for the full version.

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] RICHARD MULLEN Group Manager Product Safety and Compliance Division Letter of Agency January 22, 2013 AVG-13-U004 UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan To Whom It May Concern: Re: Panasonic Wireless Speaker System, Models SC-NE3 and SB-NE5, which contains built-in 2.4 GHz BT Transmitter and WLAN Transmitter under FCC ID: ACJ-SB-NE5 Please be advised Panasonic Corporation of North America authorizes Yoshinobu Asai of Application Section, WiSE Japan, UL Verification Service, UL Japan, Inc. to act on our behalf, until otherwise notified, for applications submitted for Federal Communication Commission Radio equipment applications submitted to UL Japan, Inc. This authorization is for FCC ID: ACJ-SB-NE5 and is effective for a period of one year from the date of this letter. We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. The application for the subject equipment has not been submitted to another TCB for certification. Product Name: Panasonic Wireless Speaker System, Models SC-NE3 and SB-NE5 With Built-In BT and WLAN Transmitters FCC ID: ACJ-SB-NE5 Power Source: AC120V, 60Hz / DC 5V, 0.5A and internal DC3.0V Battery Antenna Type & Gain: PCB Pattern Antenna with maximum antenna gain of 4.85dBi for BT and 3.65dBi for WLAN RF Exposure: Mobile Use / MPE / Requires Minimum 20 cm spacing between antenna and body Applicant & Grantee: Panasonic Corporation of North America PNA’s FCC FRN Number: 0003762242 FCC Rule Part (BT): FCC Part 15, Subpart C, Section 15.247 Equip Classification: Spread Spectrum Transmitter (DSS) Frequency Band: 2402~2480 MHz FCC Rule Part (WLAN): FCC Part 15, Subpart C, Section 15.247 Equip Classification: Digital Transmission System (DTS) Frequency Band: 2412~2462 MHz WLAN Standard: IEEE802.11b/g Thank you for your attention to this matter. Sincerely, Richard Mullen Richard Mullen Group Manager Product Safety & Compliance Division Cc: [email protected] / [email protected]

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] RICHARD MULLEN Group Manager Product Safety and Compliance Division Request for Confidentiality January 22, 2013 AVG-13-U004 UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan To Whom It May Concern: Re: Panasonic Wireless Speaker System, Models SC-NE3 and SB-NE5, which contains built-in 2.4 GHz BT Transmitter and WLAN Transmitter under FCC ID: ACJ-SB-NE5 In accordance with provisions of Sections 0.457 and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for the below indicated exhibits. This transmitter is not user adjustable and is not provided with user tune-up procedure or parts list. These exhibits contain proprietary, confidential and/or trade secret materials, which would not be routinely made available for public inspection. • Schematic Diagram • Block Diagram • Theory of Operation / Operational Description In accordance with FCC Public Notice DA 04-1705, we request forty-five day short-term confidentiality 1 , starting from the issuance of equipment authorization date, for the below indicated exhibits. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. • External Photographs • Internal Photographs • Test Setup Photographs and Test Set-up Configuration • User Manual The above materials contain trade secrets and proprietary information not customarily released to the general public. Since this design is a basis from which future technological products will evolve, the public disclosure of these materials can be harmful to the Applicant by providing unfair advantage and benefits to its competitors. Sincerely, Richard Mullen Richard Mullen Group Manager Product Safety & Compliance Division 1 Short Term confidentiality is requested for 180 days, but FCC Public Notice DA 04-1705 only allows initial 45 days and if necessary, additional days can be requested at later date.

SP Unit(SB-NE5) Front side view Bottom side view Top side view Rear side view Exterior View

SP Unit（SC-NE3） Front side view Bottom side view Top side view Rear side view Exterior View (1)

Label Location

Internal View Internal View SP (1) Bluetooth part WiFi part Left Side View Right Side View Top Side View Bottom Side View Internal View SP (2) Bluetooth part WiFi part Detail View of AirPlay Antenna Internal View SP (3) Wi-Fi ModuleAntenna Connection Wi-Fi Module AirPlayPCB Connector PCB AirplayAntenna CoaxialWire Top View Top View (Shield detached) AirPlay PCB (1) Bottom View Top View (Inside Shield) 3 Top View (Inside shield) 2 Top View (Pattern Antenna) Pattern Antenna AirPlay PCB (2) Top View Bottom View Connector PCB Bluetooth PCB Bottom ViewTop View Top View (Shield detached)

UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 Applicant: Panasonic Corporation of North America Type of Equipment : Wireless Speaker System (Airplay part) Model No. : SB-NE5 FCC ID: ACJ-SB-NE5 Panasonic Corporation of North America declares that Model : SB-NE5 ⇒ complies with FCC radiation exposure requirement specified in the FCC Rules 2.1091 (for mobile), though SB-NE5 is not subject to the routine environmental evaluation. RF Exposure Calculations: ← The following information provides the minimum separation distance for the highest gain a…

Text truncated - open the document above for the full version.