ACJ29082EB-BHX70ABluetooth Headset

Technical Description Feb/18/’04 Introduction This EB-BHX70 Headset can be connected without wires to a compatible phone that supports Bluetooth wireless technology. This gives you complete freedom for making and receiving call while on the move or at the office. Specifications (a) General Switch : 3 (Talk PWR / Vol_UP / Vol_DOWN) LED : 2 (Blue / Red) Weight : approximately 21 g Typical Talk Time : Up to 5 h Typical standby time : Up to 125 h Typical Charging time : Up to 2 h Bluetooth compliance : Bluetooth 1.1 spoecification Operating range : Up to 10 meters (b) RF Frequency operation : 2402 - 2480 MHz Type of modulation : GFSK/FHSS Bandwidth &Ch space : 1MHz / 79 channel Mode of operation : Simplex

JAPAN QUALITY ASSURANCE ORGANIZATION 21-25, KINUTA 1-CHOME, SETAGAYA-KU, TOKYO 157-8573 JAPAN PHONE +81-3-3416-0111, FAX +81-3-3416-9691 JQA APPLICATION NO.: 400-30710 Issue Date : February 4, 2004 Page 1 of 64 EMI TEST REPORT JQA APPLICATION NO. : 400-30710 Model No. : EB-BHX70A Type of Equipment : Bluetooth Headset Regulations Applied : CFR 47 FCC Rules and Regulations Part 15 FCC ID : ACJ29082EB-BHX70A Applicant : Matsushita Electric Industrial Co., Ltd. Address : 1006 Oaza Kadoma Kadoma, Osaka 571, Japan Manufacturer : Mitsumi Electric Co., Ltd.. Address : 2-11-2, Tsurumaki, Tama-shi, Tokyo, 206-8567 Japan Received date of EUT : January 19, 2004 Final Judgment : Passed Test results in this report are obtained in use of equipment that is traceable to National Institute of Advanced Industrial Science and Technology (AIST) of Japan and Communication Research Laboratory (CRL) of Japan. The test results only respond to the tested sample. This report should not be reproduced except in full, without the written approval of JQA EMC Engineering Dept. Testing Div. C O P Y JQA Application No. :400-30710 FCC ID :ACJ29082EB-BHX70A Model No. :EB-BHX70A Issue Date :February 4, 2004 Standard :CFR 47 FCC Rules Part 15 Page 2 of 64 JAPAN QUALITY ASSURANCE ORGANIZATION TABLE OF CONTENTS Page 1 Documentation 1.1 Test Regulation 4 1.2 General Information 4 1.3 Test Condition 5 – 11 1.4 EUT Modifications / Deviation from Standard 12 1.5 Test results 13 - 14 1.6 Summary 15 1.7 Test Configuration / Operation of EUT 16 1.8 EUT Arrangement (Drawing) 17 1.9 Preliminary Test and Test-setup (Drawings) 18 – 26 1.10 EUT Arrangement (Photographs) 27 - 28 C O P Y JQA Application No. :400-30710 FCC ID :ACJ29082EB-BHX70A Model No. :EB-BHX70A Issue Date :February 4, 2004 Standard :CFR 47 FCC Rules Part 15 Page 3 of 64 JAPAN QUALITY ASSURANCE ORGANIZATION 2 Test Data 2.1 Channel Separation 29 2.2 Minimum Hopping Channel 30 – 31 2.3 Occupied Bandwidth 32 – 36 2.4 Average Time of Occupancy 37 – 41 2.5 Peak Output Power (Conduction) 42 2.6 Peak Output Power (Radiation) 43 2.7 Peak Power Density (Conduction) 44 - 48 2.8 Peak Power Density (Radiation) N/A 2.9 Spurious Emissions (Conduction) 49 - 51 2.10 Spurious Emissions (Radiation) 52 - 57 2.11 AC Power Line Conducted Emissions N/A 2.12 RF Exposure Compliance 58 2.13 Spurious Emissions for Receiver (Radiation) 59 – 60 2.14 AC Power Line Conducted Emissions for Receiver N/A 3 Appendix Test instruments List 61 - 64 C O P Y JQA Application No. :400-30710 FCC ID :ACJ29082EB-BHX70A Model No. :EB-BHX70A Issue Date :February 4, 2004 Standard :CFR 47 FCC Rules Part 15 Page 4 of 64 JAPAN QUALITY ASSURANCE ORGANIZATION 1 DOCUMENTATION 1.1 TEST REGULATION FCC Rules and Regulations Part 15 Subpart B and Subpart C Test procedure : The tests were performed with reference to the FCC Public Notice DA 00-705, released March 30, 2000. The test set-up was made in accordance to the general provisions of ANSIC63.4-2001. 1.2 GENERAL INFORMATION 1.2.1 Test facility : 1) Test Facility located at EMC Engineering Dept. Testing Div. : - No.2 and 3 Anechoic Chambers(3 meters Site). - Shielded Enclosure. Expiration date of FCC test facility filing : May 27, 2005 2) EMC Engineering Dept. Testing Div. is recognized under the National Voluntary Laboratory accreditation Program for satisfactory compliance established in title 15, Part 285 Code of Federal Regulations. NVLAP Lab Code : 200189-0 (Effective through : June 30, 2004) 1.2.2 Description of the Equipment Under Test (EUT) : 1) Type of Equipment : Bluetooth Headset 2) Product Type : Pre-Production 3) Category : Spread Spectrum Transmitter(FHSS) 4) EUT Authorization : Certification 5) FCC ID : ACJ29082EB-BHX70A 6) Trade Name : - 7) Model No. : EB-BHX70A 8) Operating Frequency Range : 2402 MHz - 2480 MHz 9) Highest Frequency Used in the EUT : 2480 MHz 10) RF Output Power : 1 mW(Rated) 11) Serial No. : - 12) Date of Manufacture : - 13) Power Rating : DC 3.7(Lithium Ion Battery) 14) EUT Grounding : None 1.2.3 Definitions for symbols used in this test report : x - indicates that the listed condition, standard or equipment is applicable for this report. - indicates that the listed condition, standard or equipment is not applicable for this report. C O P Y JQA Application No. :400-30710 FCC ID :ACJ29082EB-BHX70A Model No. :EB-BHX70A Issue Date :February 4, 2004 Standard :CFR 47 FCC Rules Part 15 Page 5 of 64 JAPAN QUALITY ASSURANCE ORGANIZATION 1.3 TEST CONDITION 1.3.1 The measurement of Channel Separation x - was performed. - was not applicable. Used test instruments : Type Number of test instruments (Refer to Appendix) Test Receiver TR07 Spectrum Analyzer N/A Cable CA11 Attenuator N/A Antenna N/A 1.3.2 The measurement of Minimum Hopping Channel x - was performed. - was not applicable. Used test instruments : Type Number of test instruments (Refer to Appendix) Test Receiver TR07 Spectrum Analyzer N/A Cable CA11 Attenuator N/A Antenna N/A 1.3.3 The measurement of Occupied Bandwidth x - was performed. - was not applicable. Used test instruments : Type Number of test instruments (Refer to Appendix) Test Receiver TR07 Spectrum Analyzer N/A Cable CA11 Attenuator N/A Antenna N/A C O P Y JQA Application No. :400-30710 FCC ID :ACJ29082EB-BHX70A Model No. :EB-BHX70A Issue Date :February 4, 2004 Standard :CFR 47 FCC Rules Part 15 Page 6 of 64 JAPAN QUALITY ASSURANCE ORGANIZATION 1.3.4 The measurement of Average Time of Occupancy x - was performed. - was not applicable. Used test instruments : Type Number of test instruments (Refer to Appendix) Test Receiver TR07 Spectrum Analyzer N/A Cable CA11 Attenuator N/A Antenna N/A 1.3.5 The measurement of Peak Output Power and Density (Conduction) x - was performed. - was not applicable. Used test instruments : Type Number of test instruments (Refer to Appendix) Test Receiver TR07 Spectrum Analyzer N/A Cable CA11 Attenuator N/A Antenna N/A Power Meter AU03 Power Sensor AU04 Signal Generator SG03 C O P Y JQA Application No. :…

Text truncated - open the document above for the full version.

JQA Application No. :400-30710 FCC ID :ACJ29082EB-BHX70A Model No. :EB-BHX70A Issue Date :February 4, 2004 Standard :CFR 47 FCC Rules Part 15 Page 27 of 64 JAPAN QUALITY ASSURANCE ORGANIZATION 1.10 TEST ARRANGEMENT (PHOTOGRAPHS) PHOTOGRAPHS OF EUT CONFIGURATION FOR RADIATED EMISSIONS MEASUREMENT Photograph present configuration with maximum emission C O P Y JQA Application No. :400-30710 FCC ID :ACJ29082EB-BHX70A Model No. :EB-BHX70A Issue Date :February 4, 2004 Standard :CFR 47 FCC Rules Part 15 Page 28 of 64 JAPAN QUALITY ASSURANCE ORGANIZATION C O P Y