ACJ5Z6KX-P8425Color Laser Printer

EXHIBIT #6 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 OPERATING INSTRUCTIONS 16 FOR USERS IN UNITED STATES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: B Reorient or relocate the receiving antenna. B Increase the separation between the equipment and receiver. B Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. B Consult the dealer or an experienced radio/TV technician for help. The user may find the booklet “Something About Interference” available from FCC local regional offices helpful. FCC Warning: To assure continued FCC emission limit compliance, the user must use the recommended shielded interfacing cable when connecting to a host computer. Also, any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device. Technical Support Calls If you have read this manual and tried the troubleshooting procedures and you are still having difficulty, please contact the reseller from which the unit was purchased. You may also call the end user technical support telephone number which is operational during East Coast business hours (9:00 AM to 7:00 PM). The end user technical support number is 1-888-744-2424. This number is available within the U.S. only. Helpful Phone Numbers To locate your nearest sales dealerCALL 1-800-742-8086 ask for COLOR To order consumablesCALL 1-800-222-0584 To order operating instructions/CD’sCALL 1-800-833-9626 To locate your nearest authorized service centerCALL 1-888-744-2424 For technical supportCALL 1-888-744-2424 Automated 24-hour support via Fax backCALL 1-800-222-0584 Electronic bulletin boardCALL 1-201-863-7845 World Wide Web Technical & Driver Supporthttp://www.panasonic.com/alive n When using the network card, use the following shielded cable. For 10 Base T: For 100 Base TX: Category 5 shielded cable. Category 3, 4 or 5 shielded cable. 31 The bidirectional parallel interface is based on the IEEE P1284-B standard. If your computer has a bidirectional parallel port, the printer driver and printer can take advantage of faster data transfer. Specifications Pin configuration Parallel Interface connector (printer side) Notes: B“Return” denotes the return side wire of a twisted pair cable and is connected to signal ground. BBe sure to use only a shielded cable. The printer will not operate properly if any of the pins is not connected. Transparencies and labels Panasonic has tested and found that the following work satisfactorily: OHP transparency:3M CG3710, Folex BG74.5 Labels: AVERY 5163, AVERY 5164, AVERY 5165, Avery L7163, Avery L7165, Avery L7166, Avery L7167, Avery L7168, Avery L7169 BRe-using transparencies that have been fed through the printer once (for example, after jams or if the transparency is ejected without being printed) can reduce the life of the consumables and paper path components. BWith any label stock, the labels must completely cover the backing material. Envelopes It is recommended that you print in black text only and purchase high quality #10 laser envelopes with diagonal seams, as shown in the diagram below: High quality envelopes have the following characteristics: BA thin, sharply creased leading edge BPaper weight of 90 g/m 2 (24 lbs.) BFlat, free of curls, wrinkles, nicks, etc. Note: BWrinkle may occur in some case, even if high quality envelopes are used. NO The backing material is exposed. Labels cover the entire backing material. YES 18 36 1 19 IEEE 1284-B type connector Cable Use a shielded cable 2 m (6.6 ft.) or less in length. Connector Type Bidirectional Parallel Interface Signal nInit GND Return side pin 28 19nStrobe Signal Pin 1 20Data 12 21Data 23 22Data 34 23Data 45 24Data 56 25Data 67 26Data 78 27Data 89 28nAck10 29Busy11 Perror12 28Select13 30nAutoFD14 –NC15 –16 –FG17 –+5V(Peripheral)18 3031 Appendix Reference Guide nSelectIn NC 29nFault32 –33 –NC34 –NC35 3036

EXHIBIT #3 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Manufacturer’s Name and Address : Kyushu Matsushita Electric Co., Ltd. 1471 Murata-cho, Tosu, Saga, 841-8501 Japan Trade Name : Panasonic Model Number : KX-P8425 List of Additional Model Number / Trade Name : Not Applicable Operating Instructions : See EXHIBIT #6 Block Diagram : See EXHIBIT #5 Photographs : See EXHIBIT #1 (Photo.1 – 23) TECHNICAL REPORT PURSUANT TO FCC RULES SECTION 15.44, 15.45, 15.46

EXHIBIT #5 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 BLOCK DIAGRAM

Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 APPLICATION OF COLOR LASER PRINTER FOR FCC CERTIFICATION MODEL : KX-P8425 DCC ID : ACJ5Z6KX-P8425 LIST OF ATTACHMENT 1. APPLICATION FORM 731 2. LIST OF EXHIBIT #1:PHOTOGRAPHS (Photo. 1-23) #2:FCC CONCERNED EXPRESSIONS OF PRODUCT #3:TECHNICAL REPORT PURSUANT FCC RULES SECTION 15.44, 15.45, 15.46 #4:REPORT OF MEASUREMENT ON DIGITAL DEVICE ISSUED BY Kyushu Matsushita Electric Test Lab Co., Ltd. EMC Center #5:BLOCK DIAGRAM #6:OPERATING INSTRUCTIONS

EXHIBIT #1 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.1. Overall front view of the EUT Photo.2. Overall rear view of the EUT Photo.3. Rear inside view of the EUT with Rear Cabinet and Engine Board Cover removed Photo.4. Left side inside view of the EUT with Left Cover and Main Control Cover removed Photo.5. Top view of Main Control Board with Frame, ROM Board, option Network Card, option DIMM, and option HDD added Photo.6. Top view of Main Control Board with P1284 & USB Interface Board and PCI Extension Board Photo.7. Top view of Main Control Board Photo.8. Bottom view of Main Control Board Photo.9. Top view of option Network Card and PCI Extension Board Photo.10. Bottom view of option Network Card and PCI Extension Board Photo.11. Top and Bottom view of ROM Board Photo.12. Top and Bottom view of P1284 & USB Interface Board Photo.13. Top and Bottom view of option DIMM (64M Byte, 128M Byte) Photo.14. Top and Bottom view of option HDD and Print Wiring Board Photo.15. Top view of Printer Engine Control Board Photo.16. Bottom view of Printer Engine Control Board Photo.17. Top view of Power Supply Board and High Voltage Power Supply Board Photo.18. Bottom view of Power Supply Board and High Voltage Power Supply Board Photo.19. Top and bottom view of Front Panel Board Photo.20. Top inside view of LSU and Circuit Board on LSU Photo.21. Bottom inside view of LSU and Circuit Board on LSU Photo.22. Top view of Second Cassette Feeder Board Photo.23. Bottom view of Second Cassette Feeder Board PHOTOGRAPHS EXHIBIT #1-1 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.1 Overall front view of the EUT EXHIBIT #1-2 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.2 Overall rear view of the EUT EXHIBIT #1-3 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.3 Rear inside view of the EUT with Rear Cabinet and Engine Board Cover removed EXHIBIT #1-4 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.4 Left side inside view of the EUT with Left Cover and Main Control Cover removed EXHIBIT #1-5 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.5 Top view of Main Control Board with Frame, ROM Board, option Network Card, option DIMM, and option HDD added

EXHIBIT #1-6 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.6 Top view of Main Control Board with P1284 & USB Interface Board and PCI Extension Board EXHIBIT #1-7 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.7 Top view of Main Control Board 14.31818MHz Crystal OSC EXHIBIT #1-8 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.8 Bottom view of Main Control Board EXHIBIT #1-9 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.9 Top view of option Network Card and PCI Extension Board 25.000MHz Crystal OSC 4.125MHz Crystal OSC PCI Extension BoardNetwork Card

EXHIBIT #1-2 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.2 Overall rear view of the EUT EXHIBIT #2 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 DRAWING OF NAMEPLATE : Space for UL Listing Mark and/or CSA Monogram WARNING SENTENCES FCC CONCERNED EXPRESSIONS OF PRODUCT Panasonic COLOR LASER PRINTER Model No. KX-P8425 Serial No. POWER SOURCE: 120 V ~ 60 Hz 8 A Manufactured by Kyushu Matsushita Electric Co., Ltd. Fukuoka Japan Made in Japan FCC ID : ACJ5Z6KX-P8425 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

EXHIBIT #1-10 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.10 Bottom view of option Network Card and PCI Extension Board PCI Extension BoardNetwork Card EXHIBIT #1-11 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.11 Top and Bottom view of ROM Board Top viewBottom view EXHIBIT #1-12 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.12 Top and Bottom view of P1284 & USB Interface Board 48MHz Ceramic OSC Top viewBottom view EXHIBIT #1-13 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.13 Top and Bottom view of option DIMM (64M Byte, 128M Byte) 64M Byte (Top view)128M Byte (Top view)128M Byte (Bottom view)64M Byte (Bottom view) EXHIBIT #1-14 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.14 Top and Bottom view of option HDD and Print Wiring Board 25.00MHz Ceramic OSC Top viewBottom viewPrint Wiring Board

EXHIBIT #1-15 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.15 Top view of Printer Engine Control Board 72.305MHz Crystal OSC 25.00MHz Ceramic OSC EXHIBIT #1-16 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.16 Bottom view of Printer Engine Control Board EXHIBIT #1-17 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.17 Top view of Power Supply Board and High Voltage Power Supply Board Power Supply Board High Voltage Power Supply Board Switching Frequency 80kHz Center EXHIBIT #1-18 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.18 Bottom view of Power Supply Board and High Voltage Power Supply Board Power Supply Board High Voltage Power Supply Board

EXHIBIT #1-19 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.19 Top and Bottom view of Front Panel Board Top view Bottom view EXHIBIT #1-20 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.20 Top inside view of LSU and Circuit Board on LSU Laser Driver Board Parts side of Laser Driver Board EXHIBIT #1-21 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.21 Bottom inside view of LSU and Circuit Board on LSU Pattern side of Laser Driver Board EXHIBIT #1-22 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.22 Top view of Second Cassette Feeder Board EXHIBIT #1-23 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 Photo.23 Bottom view of Second Cassette Feeder Board

EXHIBIT #4 Fty Control No.: KMP-00-F004 FCC ID : ACJ5Z6KX-P8425 REPORT OF MEASURMENT ON DIGITAL DEVICE ISSUED BY Kyusyu Matsushita Electric Test Lab Co., Ltd EMC CENTER

Test Report No.TR99-0038I 1 of 16 (EMI) REPORT NUMBER:TR 00-0032 APPLICANT: KYUSHU MATSUSHITA ELECTRIC CO., LTD. PRINTER DIVISION MODEL NUMBER:KX-P8425 REGULATION:FCC Rules and Regulations Part 15 Subpart B - Unintentional Radiators ISSUE DATE:July 24, 2000 Kyushu Matsushita Electric Test Lab EMC Center Kyushu Matsushita Electric Test Lab Co.,Ltd. 441-13, Nagahasu Tateishi-cho, Tosu, Saga 841-8585, Japan TEL 0942-84-8472 (+81-942-84-8472) FAX 0942-84-8470 (+81-942-84-8470) TEST REPORT Test Report No.TR 00-0032 2 of 16 July 24, 2000 TABLE of CONTENTS Page SECTION 1.EMI TEST REPORT ON EUT3 SECTION 2.TEST CERTIFICATION3 SECTION 3.TEST RESULTS EMISSION 3.1Radiated Emission4 - 7 3.2Conducted Emission8, 9 SECTION 4.DESCRIPTION OF TEST EQUIPMENT 4.1Construction of Equipment10 4.2EUT and Support Equipment Used10 4.3Cable(s) Used11 4.4Operating Conditions12 4.5Any Deviations from, Additions to or Exclusions from the Test Method 12 SECTION 5.PHOTOGRAPHS OF MAXIMUM EMISSION SET-UP 5.1Radiated Emission13 5.2Conducted Emission14 SECTION 6.TEST ARRANGEMENT AND LIST OF TEST INSTRUMENTS 6.1Radiated Emission15 6.2Conducted Emission16 SECTION 7.TEST PROCEDURE(s)14-15 It is not allowed to copy this report even partly without the permission of KME TEST LAB EMC CENTER Test Report No.TR 00-0032 3 of 16 July 24, 2000 SECTION 1. EMI TEST REPORT ON EUT APPLICANT INFORMATION Company:Kyushu Matsushita Electric Co., Ltd. Printer Division Address:1471, Murata-machi, Tosu, Saga 841-8501, Japan Phone Number:0942-83-3131 (+81-942-83-3131) Facsimile Number:0942-81-2725 (+81-942-81-2725) DESCRIPTION of TEST ITEM Kind of Equipments:Color Laser Printer Condition of Equipment:Pre-Production Type:Tabletop Type Brand:Panasonic Model Number:KX-P8425 Serial Number:0EMFOA00027 Power Supply:AC 120V 60Hz TEST PERFORMED Location:Kyushu Matsushita Electric Test Lab EMC Center (Semi-Anechoic Chamber, Shielded Room) (FCC File No. 31040/SIT 1300F2) Address:441-13, Nagahasu Tateishi-cho, Tosu, Saga 841-8585, Japan Receipt Date:July 17, 2000 Test Date:July 17, 2000 Regulation:FCC Rules and Regulations Part 15 Subpart B Class B Test Procedure:ANSI C63.4-1992 SECTION 2. TEST CERTIFICATION 1.Measurement Results The results obtained from the measurement of the above mentioned device are shown in the attached sheets. The results in this report apply only to the sample(s) tested. 2.Summary of Results Test sample complies with FCC Rules and Regulations Part 15 Subpart B - Unintentional Radiators(Class B). Worst Margin(Radiated Emission)--31.766MHz(V)5.5dB(at page 6) Worst Margin(Conducted Emission)--14.6956MHz11.6dB(at page 8) 3.These test results are traceable to the National and International Standards. 4.Measurements Uncertainty, at time of test, and at last 95% Confidence, was estimated to be as follows: Radiated Emission Measurements : 5.46dB(3m)[30M-300MHz], 4.76dB(3m)[300M- 1GHz] Conducted Emission Measurements: 2.40dB[0.09M- 1MHz], 2.63dB[1M-30MHz] Issue Date : July 24, 2000 Certifying Reviewed by : M.Horie Manager : H.Hara Test Report No. TR 00-0032 4 of 16 SECTION 3. TEST RESULTS EMISSION 3.1 Radiated Emission 3.1.1 Parallel / Ethernet PrintingTest Condition of Instrument Model Name:Color Laser Printer Model No.:KX-P8425 Serial No.:0EMFOA00027 Operator:T.Yamagami Points:11 Detector:QP RBW:120kHz Date:2000/07/17 09:33 Temperature:26deg Humidity:60% EUT Warm-up Time:30minutes Distance:3m Test Mode:Parallel / Ethernet Printing Comment:AC 120V 60Hz : The measurement was radiated the worst emissions condition. Level=Emission Level=Meter Reading+Antenna Factor+Cable Loss(Cable, Preamp) LIMIT :FCC Part15 Class B (3m) Frequency[Hz] Level [dBuV/m] Limit(QP) Horizontal(QP) Vertical(QP) 30M 1G 50M 70M 100M 200M 300M 500M 700M 0 10 20 30 40 50 60 70 80 Meter Frequency Reading Ant. Antenna Cable & Level Angle Height Pola. Limit Margin [MHz] (QP) Type Factor Preamp (QP) [deg] [cm] [dBuV/m] [dB] [dBuV] [dB/m] [dB] [dBuV/m] 150.392 34.0BC 15.0 -23.9 25.1 5 209 Hori. 43.5 18.4 248.985 36.5BC 17.8 -22.7 31.6 156 252 Hori. 46.0 14.4 333.843 38.5LP 16.4 -22.3 32.6 152 182 Hori. 46.0 13.4 31.020 39.6BC 19.4 -26.2 32.8 31100 Vert. 40.0 7.2 31.260 38.5BC 19.3 -26.2 31.6 43100 Vert. 40.0 8.4 31.743 40.7BC 19.2 -26.2 33.7276100 Vert. 40.0 6.3 32.314 36.9BC 19.0 -26.1 29.8 89100 Vert. 40.0 10.2 38.048 43.0BC 16.9 -26.0 33.9 47100 Vert. 40.0 6.1 39.674 39.6BC 16.3 -26.0 29.9 3100 Vert. 40.0 10.1 60.983 48.3BC 8.9 -25.5 31.7110100 Vert. 40.0 8.3 108.131 42.5BC 11.7 -24.7 29.5226100 Vert. 43.5 14.0 BC:Biconical LP:Log-periodic DP:Dipole SDP:Short Dipole Tested by T.Yamagami Test Report No. TR 00-0032 5 of 16 3.1.2 Parallel / Ethernet PrintingTest Condition of Instrument Model Name:Color Laser Printer Model No.:KX-P8425 Serial No.:0EMFOA00027 Operator:T.Yamagami Points:3 Detector:AV RBW:1MHz Date:2000/07/17 14:04 Temperature:26deg Humidity:60% EUT Warm-up Time:30minutes Distance:3m Test Mode:Parallel / Ethernet Printing Comment:AC 120V 60Hz : The measurement was radiated the worst emissions condition. Level=Emission Level=Meter Reading+Antenna Factor+Cable Loss (Cable, Preamp) LIMIT :FCC Part15 ClassB Frequency[Hz] Level [dBuV/m] Limit(AV) Horizontal(AV) Vertical(AV) 1G 2G 1.2G 1.4G 1.6G 1.8G 0 10 20 30 40 50 60 70 80 Meter Frequency Reading Ant. Antenna Cable & Level Angle Height Pola. Limit Margin [MHz] (AV) Type Factor Preamp (AV) [deg] [cm] [dBuV/m] [dB] [dBuV] [dB/m] [dB] [dBuV/m] 1138.710 41.5HN 26.1 -36.5 31.1 Hori. 53.9 22.8 1204.757 37.9HN 26.2 -36.3 27.8 Hori. 53.9 26.1 1135.849 40.2HN 26.1 -36.5 29.8 Vert. 53.9 24.1 HN:Horn Tested by T.Yamagami Test Report No. TR 00-0032 6 of 16 3.1.3 USB PrintingTest Condition of Instrument Model Name:Color Laser Printer Model No.:KX-P8425 Serial No.:0EMFOA00027 Operator:T.Yamagami Points:9 Detector:QP RBW:120kHz Date:2000/07/17 11:21 Temperature:26deg Humidity:60% EUT Warm-up Time:30minutes Distance:3m Test Mode:USB Printing Comment:AC 120V 60Hz : The measurement was radiated the worst emissions condition. Level=Emiss…

Text truncated - open the document above for the full version.