ACJ932AN2302Drive Recorder

User Manual Since this device is always used with vehicle, it is not sold to general end users separately. Therefore there is no user manual of this device by alone. The following statements must be described on the user manual of the vehicle; [for FCC] FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [for ISED] This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1.L’appareil ne doit pas produire de brouillage; 2.L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’ISDE. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.

Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected] Ben Botros, Manager – Regulatory & Compliance Panasonic Corporation of North America Covered Equipment CFR 47 §2.911 (d)(5) Attestation September 12, 2023 PAS-23-F003 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Re: Original Certification for Vehicle Drive recorder system Model AN2302 for FCC Part 15C under FCC ID: ACJ932AN2302 To Whom It May Concern: Panasonic Corporation of North America certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Panasonic Corporation of North America certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Authorized by, Ben Botros Manager – Regulatory & Compliance Panasonic Corporation of North America

Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected] Ben Botros, Manager – Regulatory & Compliance Panasonic Corporation of North America Agent Designation Attestation C FR 47 §2.911 (d)(7) September 12, 2023 PAS-23-F003 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Re: FCC Grantee Code ACJ - Attestation Statements Part 2.911(d)(7) To whom it may concern: Panasonic Corporation of North America (“the applicant”) certifies that, Panasonic Corporation of North America is our designated U.S. agent for service of process for the above referenced FCC Grantee Code ACJ. Panasonic Corporation of North America accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Panasonic Corporation of North America accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for Grantee Code ACJ. Designated U.S. Agent Information: Name: Panasonic Corporation of North America Address: Two Riverfront Plaza, Newark, New Jersey, United States Contact Person: Ben Botros Tel.: 201-348-7760 Email: [email protected] This agreement applies to all products applied by Panasonic Corporation of North America for FCC Grantee Code ACJ and is valid within the product life. Sincerely, Ben Botros Manager – R egulatory & Compliance Panasonic Corporation of North America FRN No: 0003762242

Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected] Ben Botros, Manager – Regulatory & Compliance Panasonic Corporation of North America FCC Agent Authorization L etter September 12, 2023 PAS-23-F003 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Re: Original Certification for Vehicle Drive recorder system Model AN2302 for FCC Part 15C under FCC ID: ACJ932AN2302 . To Whom It May Concern: Please be notified that Ben Botros of Panasonic Corporation of North America (PNA), hereby authorize Rie Fujiwara of UL Japan, Inc. (“UL”) to act on our behalf in all manners relating to the application for FCC equipment authorization, including signing of all documents including form 731 relating to these matters. Any and all acts carried out by UL on our behalf relating for the subject FCC application shall have the same effect as acts of our own. The undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected] Ben Botros, Manager – Regulatory & Compliance Panasonic Corporation of North America i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is only for FCC ID: ACJ932AN2302 and is valid for a one year from date of this letter. Please advise the undersigned should you have any questions or comments. Thank you for your attention in this matter. Authorized by , Ben Botros Manager – Regulatory & Compliance Panasonic Corporation of North America

Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected] Ben Botros, Manager – Regulatory & Compliance Panasonic Corporation of North America Request for Permanent Confidentiality September 12, 2023 PAS-23-F003 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Re: Original Certification for Vehicle Drive recorder system Model AN2302 for FCC Part 15C under FCC ID: ACJ932AN2302 To Whom It May Concern: In accordance with provisions of Sections 0.457 and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for the below indicated exhibits. • Schematic Diagrams • Block Diagram • Theorty of Operation These exhibits contain proprietary, confidential and/or trade secret materials, which would not be routinely made available for public inspection. Thank you for your attention to this matter. Authorized by, Ben Botros Manager – Regulatory & Compliance Panasonic Corporation of North America

Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected] Ben Botros, Manager – Regulatory & Compliance Panasonic Corporation of North America Request for Short Term Confidentiality September 12, 2023 PA SA-23-F003 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Re: Original Certification for Vehicle Drive recorder system Model AN2302 for FCC Part 15C under FCC ID: ACJ932AN2302 To whom it may concern: Please be advised that the following information is to be held in confidence for 180 days from the date of the Grant of Equipment Authorization and behalf of us, referring to the FCC rules 0.457 and 0.459: External Photos Internal Photos Test Setup Photos User Manual The application contains technical information, which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Authorized by, Ben Botros Manager – Regulatory & Compliance Panasonic Corporation of North America

Extarnal_Photos Model name： AN2302 Product Weight : 416g RIGHT/LEFT FRONT/REAR TOP/BOTTOM Short Term Confidential 180 days 短期機密保持 180日 Panasonic Automotive Systems 25mm 128mm 171.2mm 79.5mm

Label Diagram and Label Layout “Set No.” described in Label means Model No to apply for Certification. "Model No" on the label means the number for internal management. Labels are printed stickers. Adhesive strength is maintained for the life of the product and will not peel off. Bottom side Label Confidential Period:Unlimited 秘：無期限 Panasonic Automotive Systems TOP Bracket Bracket 2mm 2mm

Internal_Photos Model name：AN2302 PCB Surface Side Antenna Cover OPEN PCB Back Side Chassis Open Short Term Confidential 180 days 短期機密保持 180日 Panasonic Automotive Systems Pattern Antenna RF Block Pattern Antenna Antenna Cover Behind the RF Block RF Block Behind the RF Block enlarged image PCB Surface Side 【Figure 1】 <RF Block Zoom Up> 【Figure 2】 Pattern Antenna RF Block PCB Back Side 【Figure 3】 Behind the RF Block

UL Japan, Inc. Kashima EMC Lab 1614 Mushihata, Katori-shi, Chiba-ken, 289-0341 Japan T: +81.478.88.6500 / F: +81.478.82.3373 / W: japan.ul.com September 11, 2023 FCC ID: ACJ932AN2302 To whom it may concern, We, UL Japan, Inc, hereby declare that Drive Recorder, model: AN2302 (FCC ID: ACJ932AN2302) is exempt from RF exposure SAR evaluation because the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold P th (mW) described in the following formula according to the Code of Federal Regulation title 47 section 1.1307(b)(3)(i)(B). This method is used at separation distances d (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive) for single RF sources. P th is given by: 푃 ௧௛ ሺ mW ሻ ൌ൜ 퐸푅푃 ଶ଴ ୡ୫ ሺ푑 / 20 cmሻ ௫ 퐸푅푃 ଶ଴ ୡ୫ 푑൑20 cm 20 cm ൏ 푑 ൑ 40 cm Where 푥ൌെlog ଵ଴ ቆ 60 퐸푅푃 ଶ଴ ୡ୫ ඥ 푓 ቇand 푓 is in GHz 퐸푅푃 ଶ଴ ୡ୫ ሺ mW ሻ ൌቊ 2040푓 3060 0.3 GHz൑푓൏1.5 GHz 1.5 GHz൑푓൑6 GHz When the minimum separation distance is shorter than 0.5 cm, 0.5 cm is applied. The SAR evaluation exemption threshold is calculated as below. [WLAN 2.4 GHz band part] Pth (mW)3060(dBm)8.50 f (GHz)2.462(mW)7.08 ERP 20 cm (mW) 30601.00 d (cm)20.09.50 (dBm)7.36 (mW)5.45 The Maximum burst-averaged power or ERP whichever greater is 7.1 mW. (Rounded up to two decimals place) Conducted Power Antenna Gain (dBi) EIRP (dBm) ERP Thank you for your attention to this matter. Kazuhiro Ando Engineer

Antenna specification Manufacture Model name Frequency Antenna gain Antenna type External view : Panasonic Automotive Systems : AN2302 : 2412~2462MHz : 1.0dBi : λ/4 Monopole Antenna : refer to "Antenna dimensional drawing" on AUT Setup Photo. Antenna specification Antenna Gain Description: Three vertical planes (XY/XZ/YZplanes) Test date Tester Test setup photographs Peak gain of main polarization : Apr. 26, 2023 : Hiroaki Kobayashi : refer to "Test setup" on AUT Setup Photo. Antenna gain:1.0dBi Directivity: refer to the chart below Antenna specification Y X Z Freq. [MHz] Surface Polari zation PeakGain [dBi] Freq. [MHz] Surface Polari zation PeakGain [dBi] Position Controller Network Analyzer Measurement System Turn Table Anechoic Chamber TxRx Dual Polarized Broadband Horn Antenna V/H Controller PC Coaxial Cable DUT Styrofoam Port2Port1 Coaxial Cable V H Equipment List Network AnalyzerE5071CKeysight Technologies Dual Polarized Broadband Horn AntennaBBHX 9120 ESCHWARZBECK

Test Report No. 14851969M-A-R2 Page 1 of 49 UL Japan, Inc. Kashima EMC Lab. 1614, Mushihata, Katori-shi, Chiba-ken, 289-0341 Japan / +81-478-88-6500 RADIO TEST REPORT Test Report No. 14851969M-A-R2 Customer Panasonic Automotive Systems Co., Ltd. Description of EUT Drive Recorder Model Number of EUT AN2302 FCC ID ACJ932AN2302 Test Regulation FCC Part 15 Subpart C Test Result Complied Issue Date September 12, 2023 Remarks - Representative Test Engineer Approved By Hiromitsu Tanabe Engineer Kazuhiro Ando Engineer CERTIFICATE 1266.01 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan, Inc. There is no testing item of "Non-accreditation". Report Cover Page - Form-ULID-003532 (DCS:13-EM-F0429) Issue# 22.0 Test Report No. 14851969M-A-R2 Page 2 of 49 UL Japan, Inc. Kashima EMC Lab. 1614, Mushihata, Katori-shi, Chiba-ken, 289-0341 Japan / +81-478-88-6500 ANNOUNCEMENT REVISION HISTORY Original Test Report No. 14851969M-A This report is a revised version of 14851969M- A-R1. 14851969M-A-R1 is replaced with this report. Revision Test Report No. Date Page Revised Contents - (Original) 14851969M-A July 10, 2023 - 1 14851969M-A-R1 August 25, 2023 P.1, P.5, P.11 - Correction of the Model Number of EUT; From “CY-VNMDN0AD” to “AN2302” P.5 - Correction of the Antenna Gain; From “0.4 dBi” to “1.0 dBi” P.19 to P.21 - Correction of the Antenna Gain and associated data. 2 14851969M-A-R2 September 12, 2023 P.23 - Added the measurement data of the Duty Factor for 11n-20 MCS 0  This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc.  The results in this report appl y only to the sample tested. (Laboratory was not involved in sampling.)  This sample tested is in compliance with the limits of the above re gulation.  The test results in this test report are traceable to the national or international standards.  This test report must not be used by the customer to claim product certification, approval, or endorsement b y the A2LA accreditation body.  This test report covers Radio technical requirements. It does not cover administrative issues such as Manual or non-Radio test related Requirements. (if applicable)  All test items in this test report are conducted by UL Japan, Inc. Kashima EMC Lab.  The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan, Inc. has been accredited.  The information provided from the customer for this report is identified in Section 1.  For test report (s) referred in this report, the latest version (including any revisions) is always referred. Test Report No. 14851969M-A-R2 Page 3 of 49 UL Japan, Inc. Kashima EMC Lab. 1614, Mushihata, Katori-shi, Chiba-ken, 289-0341 Japan / +81-478-88-6500 Reference: Abbreviations (Including words undescribed in this report) A2LA The American Association for Laboratory Accreditation ICES Interference-Causing Equipment Standard AC Alternating Current IEC International Electrotechnical Commission AFH Adaptive Frequency Hopping IEEE Institute of Electrical and Electronics Engineers AM Amplitude Modulation IF Intermediate Frequency Amp, AMP Amplifier ILAC International Laboratory Accreditation Conference ANSI American National Standards Institute ISED Innovation, Science and Economic Development Canada Ant, ANT Antenna ISO International Organization for Standardization AP Access Point JAB Japan Accreditation Board ASK Amplitude Shift Keying LAN Local Area Network Atten., ATT Attenuator LIMS Laboratory Information Management System AV Average MCS Modulation and Coding Scheme BPSK Binary Phase-Shift Keying MRA Mutual Recognition Arrangement BR Bluetooth Basic Rate N/A Not Applicable BT Bluetooth NIST National Institute of Standards and Technology BT LE Bluetooth Low Energy NS No signal detect. BW BandWidth NSA Normalized Site Attenuation Cal Int Calibration Interval NVLAP National Voluntary Laboratory Accreditation Pro gram CCK Complementary Code Keying OBW Occupied Band Width Ch., CH Channel OFDM Orthogonal Frequency Division Multiplexing CISPR Comite International Special des Perturbations Radioelectriques P/M Power meter CW Continuous Wave PCB Printed Circuit Board DBPSK Differential BPSK PER Packet Error Rate DC Direct Current PHY Physical Layer D-factor Distance factor PK Peak DFS Dynamic Frequency Selection PN Pseudo random Noise DQPSK Differential QPSK PRBS Pseudo-Random Bit Sequence DSSS Direct Sequence Spread Spectrum PSD Power Spectral Density EDR Enhanced Data Rate QAM Quadrature Amplitude Modulation EIRP, e.i.r.p. Equivalent Isotropically Radiated Power QP Quasi-Peak EMC ElectroMagnetic Compatibility QPSK Quadri-Phase Shift Keying EMI ElectroMagnetic Interference RBW Resolution Band Width EN European Norm RDS Radio Data System ERP, e.r.p. Effective Radiated Power RE Radio Equipment EU European Union RF Radio Frequency EUT Equipment Under Test RMS Root Mean Square Fac. Factor RSS Radio Standards Specifications FCC Federal Communications Commission Rx Receiving FHSS Frequency Hopping Spread Spectrum SA, S/A Spectrum Analyzer FM Frequency Modulation SG Signal Generator Freq. Frequency SVSWR Site-Voltage Standing Wave Ratio FSK Frequency Shift Keying TR Test Receiver GFSK Gaussian Frequency-Shift Keying Tx Transmitting GNSS Global Navigation Satellite System VBW Video BandWidth GPS Global Positioning System Vert. Vertical Hori. Horizontal WLAN Wireless LAN Test Report No. 14851969M-A-R2 Page 4 of 49 UL Japan, Inc. Kashima EMC Lab. 1614, Mushihata, Katori-shi, Chiba-ken, 289-0341 Japan / +81-478-88-6500 CONTENTS PAGE SECTION 1: Customer Information ......................................................................................... 5 SECTION 2: Equipment Under Test (EUT) .............................................................................. 5 SECTION 3: Test Specification, Procedures & Results ........................................................ 6 SECTION 4: Operat…

Text truncated - open the document above for the full version.

Test Setup Unit Layout X-Y Plane X-Z Plane Y-Z Plane Antenna dimensional drawing H：30mmV：10mm

Test Report No. 14851969M-A-R2 Page 46 of 49 UL Japan, Inc. Kashima EMC Lab. 1614, Mushihata, Katori-shi, Chiba-ken, 289-0341 Japan / +81-478-88-6500 APPENDIX 3: Photographs of Test Setup Radiated Spurious Emission Photo 1 Photo 2 Test Report No. 14851969M-A-R2 Page 47 of 49 UL Japan, Inc. Kashima EMC Lab. 1614, Mushihata, Katori-shi, Chiba-ken, 289-0341 Japan / +81-478-88-6500 Radiated Spurious Emission Photo 3 Photo 4 Test Report No. 14851969M-A-R2 Page 48 of 49 UL Japan, Inc. Kashima EMC Lab. 1614, Mushihata, Katori-shi, Chiba-ken, 289-0341 Japan / +81-478-88-6500 Worst Case Position X-axis Y-axis Z-axis Test Report No. 14851969M-A-R2 Page 49 of 49 UL Japan, Inc. Kashima EMC Lab. 1614, Mushihata, Katori-shi, Chiba-ken, 289-0341 Japan / +81-478-88-6500 Antenna Terminal Conducted Tests Photo 1 Photo 2 End of Report