ACJ932AT1906Display Audio

25 z Bluetooth ® The Bluetooth ® audio system enables users to enjoy music played on a portable player from the vehicle speaker via wireless communication.This audio system supports Bluetooth ® , a wireless data system capable of playing portable audio music without cables. If your portable player does not support Bluetooth ® , the Bluetooth ® audio system will not function. Caution z Do not operate the player’s controls or connect to the Bluetooth ® audio system while driving. z Do not leave your portable audio player in the car. In particular, high temperatures inside the vehicle may damage the portable audio player. z Connecting to bluetooth is disable while driving. Notes z In the following conditions, the system may not function. x The portable audio player is turned off. x The portable audio player is not connected. x The portable audio player has a low battery. z Depending on the portable audio player that is connected to the system, certain functions may not be available. z It may take time, the phone connection is carried out during Bluetooth ® audio play. z Some Bluetooth ® devices (Below Bluetooth ® 2.0) may not connect to this unit depending on the Bluetooth ® version of the device. z This unit may not work for some Bluetooth ® devices. z Connecting conditions may vary depending on your environment. z Portable audio players must correspond to the following specifications in order to be connected to the Bluetooth ® audio system. However, please note that some functions may be limited depending on the type of portable audio player. x Bluetooth ® Specification Ver.1.1 or higher (Recommended: Ver.2.1 or higher) x ProfileA2DP (Advanced Audio Distribution Profile) Ver.1.0 or higher (Recommended: Ver.1.2 or higher)This is a profile to transmit stereo audio or high quality sounds to the headphone.AVRCP (Audio/Video Remote Control Profile) Ver.1.0 or higher (Recommended: Ver.1.4 or higher)This is a profile to remote control the A/V equipments. Caution z The frequency bands in which the unit is used are a lso utilized by, apart from chemical/medical equipment and devic es such as microwave ovens, in-premises wireless stations for identifying mobile equipment used in a plant production line (wireless stations requiring a license), specified low-power wireless stations ( wireless stations not requiring a license), and amateur wireless stations (wireless stations requiring a license) (the aforementioned 3 types of wireless stations are hereinafter referred to as the “other wireless stations”). Before using the unit, be sure to verify that no “other wi reless stations” are being used in the vicinity of the unit. In the even t that the unit causes harmful interference to the “other wireless stations ”, move promptly to a position where this harmful interference is avo ided. z The unit is used at a frequency of 2.4GHz. z The FH-SS modulation technique is adopted. z The interference distance is hypothesized to be not more than 10m. z The unit is able to be used across all frequency ba nds which ensures the bandwidth of mobile equipment identifiers can b e avoided. z This telecommunication equipment conforms to NTC te chnical requirement. Bluetooth ® Audio Operation YEFM0413026 EN.indb 25 1/31/20 3:07 PM 26 1 Switching to Bluetooth ® Audio Mode (1) Touch in the Home screen ( Page 8). z The audio system turns on in the previously used mode. (2) Touch in the Menu screen. (3) The BT Audio screen (Bluetooth Audio basic operation screen) will display when Bluetooth ® audio is connected. 2 Connecting a Bluetooth ® Audio Player To use the Bluetooth ® audio system, you need to register your portable audio player into the system. Once you have registered it, you can enjoy your music on the vehicle’s audio system. Procedure is disable while driving. z When a Bluetooth ® Device is not Registered If you have not yet registered any Bluetooth ® device, you must first register it according to the following procedure. (1) Touch Bluetooth ® Symbol . (2) Touch [Add Device] to connect to Bluetooth ® device. z The [Add Device] cannot be select during the driving. Please stop driving and turn the parking brake to ON. YEFM0413026 EN.indb 26 1/31/20 3:07 PM 27 (3) Two registration methods are available: z Searching for nearby Bluetooth devices. z pairing from your Bluetooth devices. z Searching for nearby Bluetooth devices. (1) Activate the Bluetooth wireless technology on your devices. (2) Touch [Add Device]. (3) Touch [Search Device] The system searches for Bluetooth devices waiting for connection and displays them in the list if a device is found. (4) Touch the Bluetooth device name you want to register. While connecting, “Waiting for pairing ...” is displayed. (5) Touch to pair with the device. If “Connecting completed” is displayed, Touch . YEFM0413026 EN.indb 27 1/31/20 3:07 PM 28 z Pairing from your Bluetooth devices. (1) Activate the Bluetooth wireless technology on your devices. (2) Touch [Add Device]. (3) Use the Bluetooth setting in the device to pair this product with the device. Notes z The system searches for available Bluetooth devices near this product displays them in a list, and registers them for connection. z This function is only available when the Bluetooth function is turned on. z Up to 30 devices will be listed in the order that the devices are found. z If the device name cannot be obtained, only MAC address will be displayed. z In the Bluetooth device you want to connect this product with cannot be found, Check if the device is on standby for the Bluetooth connection and if the device is visible on the Bluetooth connection. z Perform the procedure form step 1 again to the device. z If your device support SSP (Secure Simple Pairing), a six-digit number appears On the display of this product. Touch on the screen of this product, and accept the painting request on the device to pair with the device. z If “Pairing failed” is displayed, try again from the beginning. YEFM0413026 EN.indb 28 1/31/20…

Text truncated - open the document above for the full version.

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0 March 10, 2020 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _ Panasonic Corporation of North America _ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: ACJ932AT1906 Product description: Display Audio Model name: AT1906 Sincerely, Sincerely, Joanna Hung / Specialist Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Address: No.19, Hwa Ya 2nd Rd., Kwei Shan Dist., Taoyuan City 33383, Taiwan, R.O.C. Tel: +886-3-264-1930 Fax: +886-3-211-5834 eMail: [email protected]

Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected] Ben Botros, Manager – Regulatory & Compliance Panasonic Corporation of North America Request for Permanent Confidentiality February 26, 2020 PASAP-20-F001 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject:Original Application for Panasonic Car Audio Model AT1906 under FCC ID: ACJ932AT1906 To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as permanently confidential document from public disclosure. zSchematic Diagram zBlock Diagram zOperational Description (Theory of Operation) Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Thank you for your attention to this matter. . Sincerely, Ben Botros Manager – Regulatory and Compliance Panasonic Corporation of North America

Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected] Ben Botros, Manager ñ Regulatory & Compliance Panasonic Corporation of North America Agent Authorization Letter February 26, 2020 PASAP-20-F001 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject:Original Application for Panasonic Car Audio Model AT1906 under FCC ID: ACJ932AT1906 To whom it may concern: Please be notified that Ben Botros of Panasonic Corporation of North America (PNA), hereby authorize Joanna Hung of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan to act on our behalf in all manners relating to the application for FCC equipment authorization, including signing of all documents including form 731 relating to these matters. Any and all acts carried out by Joanna Hung of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) of Taiwan on our behalf relating to the subject FCC application shall have the same effect as acts of our own. The undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing BSPS Taoyuan as our agent, we still recognize that we are responsible to: a)comply with the relevant provisions of the certification program; b)make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c)make claims regarding certification only in respect of the scope for which certification has been granted; d)do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e)upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g)endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h)ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected] Ben Botros, Manager ñ Regulatory & Compliance Panasonic Corporation of North America i)keep a record of all complaints made known to the us relating to the productís compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j)take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is only for; FCC ID: ACJ932AZ1906and is valid for a 6-Month period from date of this letter. Thank you for your attention in this matter. Sincerely, Ben Botros Manager ñ Regulatory and Compliance Panasonic Corporation of North America

Reference No.: 191108C22 Page 1 / 4 CONSTRUCTION PHOTOS OF EUT Reference No.: 191108C22 Page 2 / 4 Reference No.: 191108C22 Page 3 / 4 Reference No.: 191108C22 Page 4 / 4


   

 
   
 


Reference No.: 191108C22 Page 1 / 18 CONSTRUCTION PHOTOS OF EUT Reference No.: 191108C22 Page 2 / 18 Reference No.: 191108C22 Page 3 / 18 Reference No.: 191108C22 Page 4 / 18 Reference No.: 191108C22 Page 5 / 18 Reference No.: 191108C22 Page 6 / 18 Reference No.: 191108C22 Page 7 / 18 Reference No.: 191108C22 Page 8 / 18 Reference No.: 191108C22 Page 9 / 18 Reference No.: 191108C22 Page 10 / 18 Reference No.: 191108C22 Page 11 / 18 Reference No.: 191108C22 Page 12 / 18 Reference No.: 191108C22 Page 13 / 18 Reference No.: 191108C22 Page 14 / 18 Reference No.: 191108C22 Page 15 / 18 Reference No.: 191108C22 Page 16 / 18 Reference No.: 191108C22 Page 17 / 18 Reference No.: 191108C22 Page 18 / 18

Report No.: SA191108C22 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA191108C22 FCC ID: ACJ932AT1906 Test Model: AT1906 Received Date: Nov. 08, 2019 Date of Evaluation: Feb. 10, 2020 Issued Date: Feb. 12, 2020 Applicant: Panasonic Corporation of North America Address: Two Riverfront Plaza, 9th Floor Newark New Jersey United States 07102-5490 Manufacture: Panasonic Automotive Systems Asia Pacific Co., Ltd. Manufacture’s Address: 101 Moo 2 Teparak Rd., T. Bangsaothong,A. Bangsaothong, Samutprakarn 10570 Thailand Factory: Panasonic Automotive Systems Asia Pacific Co., Ltd. Factory’s Address: 101 Moo 2 Teparak Rd., T. Bangsaothong,A. Bangsaothong, Samutprakarn 10570 Thailand Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA191108C22 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Calculation Result of Maximum Conducted Power ............................................................................. 6 Report No.: SA191108C22 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA191108C22 Original Release Feb. 12, 2020 Report No.: SA191108C22 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Display Audio Brand: Panasonic Test Model: AT1906 Sample Status: Engineering Sample Applicant: Panasonic Corporation of North America Date of Evaluation: Feb. 10, 2020 Standards: FCC Part 2 (Section 2.1091) References Test Guidance : KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.3 -2002 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Feb. 12, 2020 Gina Liu / Specialist Approved by : , Date: Feb. 12, 2020 Dylan Chiou / Senior Project Engineer Report No.: SA191108C22 Page No. 5 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA191108C22 Page No. 6 / 6 Report Format Version: 6.1.1 2.4 Calculation Result of Maximum Conducted Power Band Frequency Band (MHz) Max Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) WLAN 2412-2462 16.51 3.4 20 0.019 1.00 5725-5825 13.30 3.4 20 0.009 1.00 BT 2402-2480 -1.56 3.4 20 0.000 1.00 Note: 1. Determining compliance based on…

Text truncated - open the document above for the full version.

Report No.: RF191108C22-2 Page No. 1 / 46 Report Format Version:6.1.2 FCC Test Report Report No.: RF191108C22-2 FCC ID: ACJ932AT1906 Test Model: AT1906 Received Date: Nov. 08, 2019 Test Date: Jan. 21 ~ Feb. 04, 2020 Issued Date: Feb. 12, 2020 Applicant: Panasonic Corporation of North America Address: Two Riverfront Plaza, 9th Floor Newark New Jersey United States 07102-5490 Manufacture: Panasonic Automotive Systems Asia Pacific Co., Ltd. Manufacture’s Address: 101 Moo 2 Teparak Rd., T. Bangsaothong,A. Bangsaothong, Samutprakarn 10570 Thailand Factory: Panasonic Automotive Systems Asia Pacific Co., Ltd. Factory’s Address: 101 Moo 2 Teparak Rd., T. Bangsaothong,A. Bangsaothong, Samutprakarn 10570 Thailand Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location (1): No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan Test Location (2): B2F., No.215, Sec. 3, Beixin Rd., Xindian Dist., New Taipei City 231, Taiwan FCC Registration / Designation Number: 788550 / TW0003 427177 / TW0011 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF191108C22-2 Page No. 2 / 46 Report Format Version:6.1.2 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ........................................................................................................................... 5 2 Summary of Test Results ........................................................................................................................... 6 2.1 Measurement Uncertainty ..................................................................................................................... 6 2.2 Modification Record .............................................................................................................................. 6 3 General Information ................................................................................................................................... 7 3.1 General Description of EUT .................................................................................................................. 7 3.2 Description of Test Modes ..................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail .................................................................... 8 3.3 Duty Cycle of Test Signal .................................................................................................................... 10 3.4 Description of Support Units ................................................................................................................ 11 3.4.1 Configuration of System under Test .......................................................................................... 11 3.5 General Description of Applied Standards and References ............................................................... 12 4 Test Types and Results ............................................................................................................................ 13 4.1 Radiated Emission and Bandedge Measurement .............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement ..................................................... 13 4.1.2 Limits of Unwanted Emission Out of the Restricted Bands ...................................................... 14 4.1.3 Test Instruments ....................................................................................................................... 15 4.1.4 Test Procedures ........................................................................................................................ 16 4.1.5 Deviation from Test Standard ................................................................................................... 16 4.1.6 Test Setup ................................................................................................................................. 17 4.1.7 EUT Operating Conditions ........................................................................................................ 18 4.1.8 Test Results .............................................................................................................................. 19 4.2 Transmit Power Measurement ...................…

Text truncated - open the document above for the full version.

FCC ID: ACJ932AT1906 1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST BELOW 1GHz (X-Plane) Bluetooth FCC ID: ACJ932AT1906 2 FCC ID: ACJ932AT1906 3 WLAN 2.4G & WLAN 5G FCC ID: ACJ932AT1906 4 FCC ID: ACJ932AT1906 5 RADIATED EMISSION TEST ABOVE 1GHz (X-Plane) Bluetooth FCC ID: ACJ932AT1906 6 FCC ID: ACJ932AT1906 7 WLAN 2.4G & WLAN 5G FCC ID: ACJ932AT1906 8