ACJ932BH2201Display Audio

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

ii Before Using the Portable Audio Device Warning SRS airbag compartments Connection cable  Do not place the connected portable audio device or connection cable in a location where it will prevent the SRS airbag from deploying. The SRS airbag may not operate correctly or the portable audio device may be catapulted outward by the deploying airbag, which may result in serious injury or death . Refer to the owner’s manual for your car regarding the deploying position of the SRS airbag.  Place or temporarily fix the portable audio device and connection cable where they will not interfere the driver when driving. Otherwise, they may interfere driving or cause auto accident. Caution Keep the sound volume at an appropriate level. Keep the volume level low enough to be aware of road and traffic conditions while driving. This unit is designed for use exclusively in automobiles. Do not operate the unit for a prolonged period with the engine turned off. Operating the audio system for a long period of time with the engine turned off will drain the battery. Do not expose the unit to direct sunlight or excessive heat. Otherwise these will raise the interior temperature of the unit, and it may lead to smoke, fire, or other damage to the unit. Do not use the product where it is exposed to water, moisture, or dust. Exposure of the unit to water, moisture, or dust may lead to smoke, fire, or other damage to the unit. Make especially sure that the unit does not get wet in car washes or on rainy days. Do not turn off the power until the program reading process has been completed. If the connection to the battery is cut or the voltage is reduced, the program being downloaded to this unit will be deleted. If this happens, the program will be downloaded again while the Opening Screen is displayed when restarting the unit. Please wait until the program reading process is completed. If the power is turned off during the program reading process, unexpected damage may occur such as the inability of the audio function to start. Do not turn the power off during user version update. Do not touch or hold display during turn on the power until caution screen show on display. YEFM0412419_01.indd iiYEFM0412419_01.indd ii10/11/19 2:32 PM10/11/19 2:32 PM iii Notes on Use Radio RANGE AREA FM(Stereo) FM(Monaural) AM The antenna should be adjusted for best reception. Usually, a shorter antenna length is better in cities, while a fully extended antenna is best for distant reception. Always retract the antenna before using an automatic car wash. About FM radio reception STATICMULTIPATH When listening to FM broadcasts in a moving vehicle, the reception conditions constantly change with buildings, terrain, distance from the transmitter and noise from other vehicles. The following phenomena of FM reception are normal and do not indicate a problem with the radio itself: Notes Fading and drifting : The range of FM is about 25 miles (40 km),except for some high-power stations. If the vehicle moves away from the transmitter, the signal tends to fade out and/or drift. This is common to FM broadcasting and might be accompanied by distortion. Fading and drifting can be minimized by tuning to a stronger signal. Static and flutter : When the line-of-sight link between the transmitter and vehicle is blocked by large buildings or the like, the broadcast sound may be accompanied by static or flutter. You may also experience fluttering while driving along a tree-lined road. The effects of static and fluttering on the sound can be reduced by decreasing treble. Multipath : Due to the reflection characteristics of FM signals, direct and reflected signals may reach the antenna simultaneously (this is called multipath) and cancel each other. As the vehicle moves through such a spot, a momentary flutter or loss of reception may occur. Station swapping : When two FM stations are located close to each other in the frequency spectrum and the current signal is interrupted by an electronic dead spot caused by static or multipath, the stronger signal may automatically be selected until the original signal returns. Station swapping can also occur as the vehicle moves away from a station and towards another with a stronger signal. YEFM0412419 EN.indb iiiYEFM0412419 EN.indb iii9/16/19 11:07 AM9/16/19 11:07 AM iv Notes Condensation The internal lens in this unit may have condensation and not operate properly after the heater is turned on inside the vehicle in low temperatures, etc. In such cases, leave the unit as it is for about an hour. The condensation will dissipate and the unit will operate properly. If the unit does not operate properly even after several hours, contact your local distributor. Irregularity in the display When switching button or the ignition key to ON in low temperatures, the LCD backlight may become irregular or the display may become darker. This is a characteristic of LCD backlights. Please press the screen comfortably because It might cause image blurred/ distorted. Notes This unit utilizes a precision mechanism; therefore, static, electronic noise or vibration may cause the data you have saved to be deleted. Keep note of the data you have saved on this unit. Please note that the following cases are not warrantable.  The data you have saved on this unit is changed or deleted due to a failure, malfunction or defect of the unit or the effect of electronic noise on the unit.  The data you have saved on this unit is changed or deleted due to your or a third party’s improper use.  The data you have saved on this unit is changed or deleted while this unit is being repaired. Depending on the position of the smartphone, the reception of the GPS satellite signal might not be possible. Consult your dealer about upgrade options. The screens on this document may be different from the actual screens on the unit. Please also note that the contents of this document may not match the actual product due to changes in speci…

Text truncated - open the document above for the full version.

Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel: 201-348-7760 / [email protected] Ben Botros, Manager – Regulatory & Compliance Panasonic Corporation of North America FCC Agent Authorization Letter September 7, 2022 PASP-22-F003 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 Re: Original Certification for AV Control Unit for In-Vehicle Infotainment, Model BH2201 under FCC ID: ACJ932BH2201 To Whom It May Concern: Please be notified that Ben Botros of Panasonic Corporation of North America (PNA), hereby authorize Andrea Hsia of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) to act on our behalf in all manners relating to the application for FCC equipment authorization, including signing of all documents including form 731 relating to these matters. Any and all acts carried out by Andrea Hsia of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan Branch) on our behalf relating for the subject FCC application shall have the same effect as acts of our own. The undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Bureau Veritas Consumer Products Services (H.K.) Ltd., as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel: 201-348-7760 / [email protected] Ben Botros, Manager – Regulatory & Compliance Panasonic Corporation of North America h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is only for FCC ID: ACJ932BH2201 and is valid for a 6-Month period from date of this letter. Thank you for your attention in this matter. Sincerely, Ben Botros Manager – Regulatory & Compliance Panasonic Corporation of North America

                       !"#$ % !&#'!( ) *+* ,-+ + . .  /0 1 0-  2 3                                    ! "  #$  %&'()    )#*%+  , ' -     ) .*      / 0! 1)   ,  1  2! $    3%&3%&4 !  5  &&676%7 !    1   2  ! 2 8!3/! 8!      9     2! !2    $    3    !  #-    : (#-    /!  '      /!(      !  3     ! "  ::   )- ;- <         = !                Schematic Diagrams Block Diagram Theorty of Operation Tune up Procedure

Reference No.: BHCP-WTW-P22060701_EXT 1 of 5 CONSTRUCTION PHOTOS OF EUT Reference No.: BHCP-WTW-P22060701_EXT 2 of 5 Reference No.: BHCP-WTW-P22060701_EXT 3 of 5 Reference No.: BHCP-WTW-P22060701_EXT 4 of 5 Reference No.: BHCP-WTW-P22060701_EXT 5 of 5

Label location: on the top side of unit Model: BH2201 FCC ID: ACJ932BH2201

Reference No.: BHCP-WTW-P22060701_INT 1 of 14 CONSTRUCTION PHOTOS OF EUT Reference No.: BHCP-WTW-P22060701_INT 2 of 14 Reference No.: BHCP-WTW-P22060701_INT 3 of 14 Reference No.: BHCP-WTW-P22060701_INT 4 of 14 Reference No.: BHCP-WTW-P22060701_INT 5 of 14 Reference No.: BHCP-WTW-P22060701_INT 6 of 14 Reference No.: BHCP-WTW-P22060701_INT 7 of 14 Reference No.: BHCP-WTW-P22060701_INT 8 of 14 Reference No.: BHCP-WTW-P22060701_INT 9 of 14 Reference No.: BHCP-WTW-P22060701_INT 10 of 14 Reference No.: BHCP-WTW-P22060701_INT 11 of 14 Reference No.: BHCP-WTW-P22060701_INT 12 of 14 Reference No.: BHCP-WTW-P22060701_INT 13 of 14 Reference No.: BHCP-WTW-P22060701_INT 14 of 14

Report No.: MFBHCP-WTW-P22060701 Page No. 1 / 5 Report Format Version: 6.1.1 RF Exposure Report Report No.: MFBHCP-WTW-P22060701 FCC ID: ACJ932BH2201 Test Model: BH2201 Received Date: 2022/6/21 Date of Evaluation: 2022/11/9 Issued Date: 2022/11/9 Applicant: Panasonic Corporation of North America Address: Two Riverfront Plaza, 9th Floor, Newark New Jersey, United States, 07102- 5490 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBHCP-WTW-P22060701 Page No. 2 / 5 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Calculation Result of Maximum Conducted Power ............................................................................. 5 Report No.: MFBHCP-WTW-P22060701 Page No. 3 / 5 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued MFBHCP-WTW-P22060701 Original Release 2022/11/9 Report No.: MFBHCP-WTW-P22060701 Page No. 4 / 5 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Display Audio Brand: Panasonic Test Model: BH2201 Sample Status: Engineering Sample Applicant: Panasonic Corporation of North America Date of Evaluation: 2022/11/9 FCC Rule Part: FCC Part 2 (Section 2.1091) Standards : KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: 2022/11/9 Vera Huang / Specialist Approved by : , Date: 2022/11/9 Jeremy Lin / Project Engineer Report No.: MFBHCP-WTW-P22060701 Page No. 5 / 5 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Calculation Result of Maximum Conducted Power Band Frequency Band (MHz) Max. AV Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) BT 2402-2480 -2.72 3.6 20 0.00024 1.00 Note: 1. Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2. Detail antenna specification please refer to antenna datasheet. --- END ---

BH2201 BT Only Module Antenna Return loss & Radiation Pattern Measurement 1 15-Dec-2021 Prepared by : Karthick Kuthalingam Reviewed by : Debojyoti (Antenna team) Equipment List and Test Method 2 ❑Equipment List and EUT ❑Test Method /Standard No.EquipmentBrandModel No. 1Far Field Anechoic Chamber -Indoor Lab 2Transmit Horn AntennaETS LindgrenETS 3115 3Reference Antenna MVGSH800 4Signal Generator KeysightN5182A 5Signal Receiver R&SESU 40 6VNAKeysight5071C 7EUT (Display Audio)PanasonicBH2201 Refer IEEE Recommended Practice for Antenna Measurements Document No: IEEE Std 149 TM -2021 BT Antenna with Enclosure -Return Loss Testing Setup DUT Vector Network Analyzer Measurement Setup Return Loss With Enclosure –Return Loss Measurement Return Loss S11 Plot Inference:Antennaisperfectlyresonatingat2.4–2.5GHzGHzwithRL>9dBovertherequiredbands MeanderlineAntennacouldnotbetunedinthismetalcase/panelenvironmentandfoundanalternativeantenna topologycalledPIFAwhichworksperfectlyonthebandofinterest.Itrequiresnotuningcomponents. Frequency (GHz) RL(dB) 2.4-10.5 2.45-18.0 2.5-9.0 Radiation Pattern Measurement -Set-up 5 5 Control Room Anechoic Chamber Phi-0 Theta-90 2D Radiation Pattern 6 Phi-0Phi-90Theta-90 3D Radiation Pattern 7 2400MHz2450MHz2500MHz Measured Antenna Gain 8 Frequency (GHz) Peak Gain (dBi) 2.40 GHz3.6 2.45 GHz3.5 2.50 GHz2.5 Inference:TheRadiationpatternwith>2.5dBigainobservedintherequiredBTband. Summary Antennatopology(PIFA)isdesigned,alsosimulatedinCSTandimplementedonthesame1SPCB andevaluatedforReturnloss, oReturnlossmettherequirementsfortherequired2.4Gbandwithoutneedforexternal matchingcomponents oAntennagain,itgivesgoodRadiationpatternwith>2.5dBi 9 #HCLERS HCL @ Facebook ERS Blogs HCL ERS in LinkedIn HCL TechTube 10

Report No.: RFBHCP-WTW-P22060701 Page No. 1 / 40 Report Format Version: 7.1.0 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart C (Section 15.247) Report No.: RFBHCP-WTW-P22060701 FCC ID: ACJ932BH2201 Model No.: BH2201 Received Date: 2022/6/21 Test Date: 2022/7/7 ~ 2022/7/12 Issued Date: 2022/9/19 Applicant: Panasonic Corporation of North America Address: Two Riverfront Plaza, 9th Floor, Newark New Jersey, United States, 07102-5490 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location (1): No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan Test Location (2): No. 70, Wenming Rd., Guishan Dist., Taoyuan City 333, Taiwan FCC Registration / Designation Number: 788550 / TW0003 281270 / TW0032 Approved by: , Date: 2022/9/19 Jeremy Lin / Project Engineer This test report consists of 41 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Vera Huang / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBHCP-WTW-P22060701 Page No. 2 / 40 Report Format Version: 7.1.0 Table of Contents Release Control Record ....................................................................................................................................................... 4 1 Certificate .................................................................................................................................................................... 5 2 Summary of Test Results .......................................................................................................................................... 6 2.1 Measurement Uncertainty ........................................................................................................................................ 6 2.2 Supplementary Information ...................................................................................................................................... 6 3 General Information ................................................................................................................................................... 7 3.1 General Description .................................................................................................................................................. 7 3.2 Antenna Description of EUT ..................................................................................................................................... 7 3.3 Channel List .............................................................................................................................................................. 8 3.4 Test Mode Applicability and Tested Channel Detail .................................................................................................. 9 3.5 Duty Cycle of Test Signal .......................................................................................................................................... 9 3.6 Test Program Used and Operation Descriptions .................................................................................................... 10 3.7 Connection Diagram of EUT and Peripheral Devices ............................................................................................ 10 3.8 Configuration of Peripheral Devices and Cable Connections ................................................................................ 10 4 Test Instruments ...................................................................................................................................................... 11 4.1 RF Output Power .................................................................................................................................................... 11 4.2 Number of Hopping Frequency Used ..................................................................................................................... 11 4.3 Dwell Time on Each Channel ..............................................................…

Text truncated - open the document above for the full version.

Reference No.: BHCP-WTW-P22060701_TSup 1 PHOTOGRAPHS OF THE TEST CONFIGURATION Radiated Emission Test (Above 1GHz) Reference No.: BHCP-WTW-P22060701_TSup 2 Radiated Emission Test (Below 1GHz)