ACJ96NKX-A407DECT 6.0 Cordless Telephone System Repeater

Installation Manual Repeater KX-A407 Model No. Thank you for purchasing this Panasonic product. Please read this manual carefully before using this product and save this manual for future use. Note • In this manual, the suffix of each model number is omitted unless necessary. Document Version: 2020-01 Introduction Introduction Outline This manual describes information about the installation and registration of KX-A407. Related Documentation •Quick Start Guide Describes setup and safety information of the unit. Manuals and supporting information are provided on the Panasonic Web site at: https://panasonic.net/cns/pcc/support/sipphone/ Note The contents and design of the software are subject to change without notice. About this Installation Manual This Installation Manual is designed to serve as an overall installation reference when using this repeater with Panasonic SIP Cordless Phones. The SIP Cordless Phone base unit is described as base unit in this manual. Introduction 2 Table of Contents 1 Important Information .......................................................... 4 1.1Important Information ................................................................................... 4 1.2For best performance ................................................................................... 7 2 Overview ................................................................................ 9 2.1Overview ........................................................................................................ 9 2.2System Connection Example ....................................................................... 9 2.3Location of Controls ................................................................................... 11 2.4Included Accessories ................................................................................. 11 2.5Indicators ..................................................................................................... 12 2.6Repeater ID Confirmation ........................................................................... 15 2.7Site Survey ................................................................................................... 16 3 Linking to SIP Cordless Phones ....................................... 18 3.1Linking to SIP Cordless Phones ................................................................ 18 3.2Compatible Devices .................................................................................... 18 3.3Indicators ..................................................................................................... 18 3.4Installation/Registering the Repeater ........................................................ 19 3.5Troubleshooting .......................................................................................... 23 4 Appendix ............................................................................. 25 4.1Appendix ...................................................................................................... 25 4.2Wall Mounting .............................................................................................. 25 4.3Specifications .............................................................................................. 27 Table of Contents 3 1 Important Information 1.1 Important Information CAUTION SECURITY REQUIREMENTS Preventing Data Disclosure Over the Network • To ensure the security of private conversations, only connect the product to a secure network. • To prevent unauthorized access, only connect the product to a network that is properly managed. Note SAFETY REQUIREMENTS • Before connecting the product, confirm that the product supports the intended operating environment. • Do not change the DIP switch setting during power supplied. • If the product does not operate properly, disconnect the AC adaptor cord, then connect again. • The product may not operate in the event of a power failure. • Satisfactory operation, interoperability, and compatibility cannot be guaranteed with all equipment connected to the product, nor with all services provided by telecommunications providers over networks connected to the product. SECURITY REQUIREMENTS • Privacy of communications may not be ensured when using the wireless systems. 1 Important Information 4 For Users in European countries The following declaration is applicable to KX-A407CE/KX-A407UK only Hereby, Panasonic Corporation declares that the radio equipment described in this manual is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.ptc.panasonic.eu/compliance-documents Contact to Authorized Representative: Panasonic Testing Center Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Ecodesign information Ecodesign information under EU Regulation (EC) No.1275/2008 amended by (EU) Regulation No. 801/2013. The text of the ErP Free Web Product Information is available at the following internet address: https://www.ptc.panasonic.eu/compliance-documents Power consumption in networked standby and guidance are mentioned in the web site above. For Users in the United Kingdom Only • This unit is designed to be installed under controlled conditions of ambient temperature and a relative humidity. • Avoid installing the unit in damp or humid environments, such as bathrooms or swimming pools. For Users in the United States Only FCC and Other Information Privacy of communications may not be ensured when using this product. FCC RF Exposure Warning • This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. • To comply with FCC RF exposure requirements, the product must be installed and operated 20 cm (8 inches) or more between the product and all person’s body. • This product may not be collocated or operated in conjunction with any other antenna or transmitter. FCC ID can be found on the back of this product. 1.1 I…

Text truncated - open the document above for the full version.

FCC Part 15D – Compliance Information Nemko AS, Instituttveien 6, 2007 Kjeller, Norway kx-a407_fcc part 15d declarations Tel: +47 22 96 03 30 Fax: +47 22 96 05 50 Page 1 (5) rev.2.8 28-Feb-2018 Email: [email protected] EUT AND PRODUCT INFORMATION Type of Equipment UPCS (DECT 6.0) Applicant Name Panasonic Corporation Address 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka, 812-8531 Japan Contact Michihito Miyazaki Telephone +81-70-1349-4205 Email [email protected] Brand Name Panasonic Base Station Handset / Portable WRS EUT Type/System ☐ ☐ ☒ FCC ID ACJ96NKX-A407 ISED ID (Canada) 216A-KXA407 Model name KX-A407 HW Version PNLB2816ZAxx SW Version Ver 00.01 Maximum Antenna Gain 0.5dBi Can the EUT be Initiating Device ☐ YES ☐ YES ☒ YES Does the EUT transmit signaling channels ☐ YES ☐ YES ☒ YES Max. # of slots in use simultaneously 12Slots* 2RF units Frequency Band 1921.536 – 1928.448 MHz Number of RF Channels 5 Frame Period 10 ms Max. Burst length 723us Min. Burst Length 390us Min. # of System Channels 60 (12 duplex channels per RF carrier) Supported DECT Slot Types ☒ Full Slot ☒ Long Slot ☐ Double Slot Operating Mode ☐ Simplex ☒ Duplex FCC Part 15D – Compliance Information Nemko AS, Instituttveien 6, 2007 Kjeller, Norway kx-a407_fcc part 15d declarations Tel: +47 22 96 03 30 Fax: +47 22 96 05 50 Page 2 (5) rev.2.8 28-Feb-2018 Email: [email protected] ANTENNAS Base Station Antenna Type Internal External 1 λ/2 Dipole Antenna (for RF1 unit) ☐ ☒ 2 λ/2 Dipole Antenna (for RF1 unit) ☒ ☐ 3 λ/2 Dipole Antenna (for RF2 unit) ☐ ☒ 4 λ/2 Dipole Antenna (for RF2 unit) ☒ ☐ Does RX and TX use the same antenna(s)? ☒ Yes ☐ No Handset Antenna Type Internal External 1 ☐ ☐ 2 ☐ ☐ Does RX and TX use the same antenna(s)? ☐ Yes ☐ No ANTENNA DIVERSITY Antenna Diversity Supported TX RX Base Station 1 ☒ ☒ 2 ☒ ☒ 3 ☒ ☒ 4 ☒ ☒ Handset 1 ☐ ☐ 2 ☐ ☐ VOLTAGE AND TEMPERATURE RANGES VOLTAGES Base Station Handset or Portable WRS Nominal Voltage 5.5 Vdc Cut-Off Voltage (if applicable) POWER SOURCE Type Manufacturer Base Station or WRS PNLV236 (AC Adaptor) Panasonic Handset (Charger) Connections on Base ☐ PSTN ☐ USB ☐ Ethernet ☒ Others (please specify) ....RF FCC Part 15D – Compliance Information Nemko AS, Instituttveien 6, 2007 Kjeller, Norway kx-a407_fcc part 15d declarations Tel: +47 22 96 03 30 Fax: +47 22 96 05 50 Page 3 (5) rev.2.8 28-Feb-2018 Email: [email protected] ANCILLARY EQUIPMENT Description AC Adapter Type PNLV236 (AC Adaptor) Manufacturer Panasonic HOST DEVICE Description Type Manufacturer ADDITIONAL INFORMATION FCC Part 15D – Compliance Information Nemko AS, Instituttveien 6, 2007 Kjeller, Norway kx-a407_fcc part 15d declarations Tel: +47 22 96 03 30 Fax: +47 22 96 05 50 Page 4 (5) rev.2.8 28-Feb-2018 Email: [email protected] MANUFACTURERS DECLARATIONS FCC part 15.323 (c)(5) The applicant declares that the system in this application has more than 20 duplex system access channels defined, and that the system is operating in Least Interfered Channel (LIC) mode in accordance with this section. Applicant Agrees ☒ Yes ☐ No FCC part 15.323 (c)(5) No device or group of co-operating devices located within 1m of each other shall during any frame period occupy more than 6 MHz of aggregate bandwidth, or alternatively, more than one third of the time and spectrum windows defined by the system. Applicant Agrees ☒ Yes ☐ No FCC part 15.323 (c)(10) The applicant hereby declares that the system in this application does use the criteria of (c)(10) of this section. Applicant Agrees ☒ Yes ☐ No FCC part 15.323 (c)(11) The applicant hereby declares that system in this application does not use the criteria of (c)(11) of this section. Applicant Agrees ☒ Yes ☐ No FCC part 15.323 (c)(12) The provisions of (c)(10) or (c)(11) of this section shall not be used to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. Applicant Agrees ☒ Yes ☐ No ADDITIONAL REMARKS: > DECLARED BY: January 21, 2020 Date Michihito Miyazaki Name (print) Signature FCC Part 15D – Compliance Information Nemko AS, Instituttveien 6, 2007 Kjeller, Norway kx-a407_fcc part 15d declarations Tel: +47 22 96 03 30 Fax: +47 22 96 05 50 Page 5 (5) rev.2.8 28-Feb-2018 Email: [email protected] About this document This document specifies the information that is needed to select the correct testcases and test procedures for testing to FCC Part 15D. The form must be completed by the applicant and submitted to Nemko before testing is started. Preparation of Equipment for Testing Note (a): Number of samples for testing The following samples are needed for FCC 15D testing: RF Conducted Tests: One sample with a 50 ohm antenna connector (preferably SMA Female). Only one antenna connector is needed for these tests even if the equipment has more than one antenna. Monitoring Tests: One sample with 50 ohm antenna connectors fitted to all antennas (preferably SMA female). Additionally we need a companion device that will work together with the EUT, the companion device must also have antenna connectors on all antennas. Radiated Tests: One sample with integral antennas. This sample will be used to measure Antenna Gain, Part 15B and Power-Line Conducted tests. Note (b): Burst Mode All RF tests are performed with the EUT in force transmit, aka burst mode. Software and necessary programming tools must be submitted to Nemko together with the test samples before start of testing. Note (c): Monitoring Tests Monitoring tests are performed in normal operating mode by establishing a connection from the handset (or the initiating device) to the base station (or the responding device). Most tests are performed by establishing connections from the initiating device to the responding device and observing which channel and/or timeslot is used. For monitoring tests we need a EUT and a Companion device that both have antenna connectors on all antennas (preferably SMA female, again). Addition…

Text truncated - open the document above for the full version.

Two Riverfront Plaza | Newark, NJ 07102-5490 Ben Botros, Project Manager Safety , Compliance and Quality Assurance Authorization Letter March 16, 2020 PCNF-20-U009 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Panasonic Corporation of North America hereby authorizes Nemko AS to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product. Any and all acts carried out by Nemko AS on our behalf shall have the same effects as acts of our own for a period of six months from the date of this letter. Type Filing: Original Application DECT Repeater Model Numbers: KX-A407 FCC Classification: Isochronous UPCS Base (PUB) FCC Rule Part: FCC Part 15, Subpart D Frequency Range: 1921.536 ~ 1928.448 Number Channels: 5 RF Channels / 5x12 = 60 TDMA Duplex Channels RF Exposure: Mobile / MPE (requires minimum 20cm spacing between antenna and body) FCC Rule Part: FCC Part 15, Subpart B FCC Classification: Class B Digital Device (JAB) FCC ID: ACJ96NKX-A407 Responsible Panasonic Corporation of North America Applicant & Grantee: Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Sincerely yours, Ben Botros Project Manager Panasonic Corporation of North America Safety, Compliance and Quality Assurance

Two Riverfront Plaza | Newark, NJ 07102-5490 Ben Botros, Project Manager Safety , Compliance and Quality Assurance Request for Confidentiality March 16, 2020 PCNF-20-U009 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Panasonic Corporation of North America hereby authorizes Nemko AS to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product. Any and all acts carried out by Nemko AS on our behalf shall have the same effects as acts of our own for a period of six months from the date of this letter. Type Filing: Original Application DECT Repeater Model Numbers: KX-A407 FCC Classification: Isochronous UPCS Base (PUB) FCC Rule Part: FCC Part 15, Subpart B (JAB) and D (UPCS) Request For Permanent Confidentiality In accordance with provisions of Sections §§0.457(d) and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain: (1) Antenna Construction; (2) Description of Electrical Circuitry; (3) Schematic Diagrams and (4) Block Diagram. The transmitter is not user adjustable and does not have a Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public ins pection. Request For Short-Term Confidentiality In accordance with FCC Public DA 04-1705, we request ninety day short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain: (1) External Photographs (2) Internal Photographs (3) Test Setup Photographs; and (4) User Manual. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Sincerely yours, Ben Botros Project Manager Panasonic Corporation of North America Safety, Compliance and Quality Assurance

1 of 6 EXHIBIT D-1 EXTERNAL PHOTOGRAPHS 2 of 6 EXHIBIT D-1 EXTERNAL PHOTOGRAPHS 3 of 6 EXHIBIT D-1 EXTERNAL PHOTOGRAPHS 4 of 6 EXHIBIT D-1 EXTERNAL PHOTOGRAPHS 5 of 6 EXHIBIT D-1 EXTERNAL PHOTOGRAPHS 6 of 6 EXHIBIT D-1 EXTERNAL PHOTOGRAPHS

EXHIBIT B PRODUCT LABELING GRANTEE : Panasonic Corporation of North America GRANTEE CODE : ACJ COUNTRY OF ORIGIN : Vietnam TRADE NAME : PANASONIC MATERIAL OF LABEL : Aluminum or Polyester Film or Molded on the Unit Serial number will be printed on the other label, and the serial number label will be affixed on the unit.

1 of 5 EXHIBIT D-2 INTERNAL PHOTOGRAPHS 2 of 5 EXHIBIT D-2 INTERNAL PHOTOGRAPHS 3 of 5 EXHIBIT D-2 INTERNAL PHOTOGRAPHS 4 of 5 EXHIBIT D-2 INTERNAL PHOTOGRAPHS 5 of 5 EXHIBIT D-2 INTERNAL PHOTOGRAPHS

FCC ID: ACJ96NKX-A407 MPE Calculation for FCC Uncontrolled Environment Formula from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Source Based Time Averaged Duty Cycle is 100% in calculation below Maximum peak output power at antenna input terminal:18.30(dBm) Maximum peak output power at antenna input terminal:0.068(W) Maximum antenna gain:4.00(dBi) Maximum antenna gain:2.512(numeric) Prediction distance:20(cm) Prediction frequency:1925(MHz) Time Averaged Duty Cycle100% MPE limit for uncontrolled exposure at prediction frequency:10.00(W/m^2) Power density at prediction frequency:0.0338(mW/cm^2) Power density at prediction frequency:0.338(W/m^2) Maximum allowable antenna gain:18.71(dBi) Margin of Compliance:14.71(dB) 2 4R PG S p =

Report No. 379524-23-R00 Template version: D Nemko Norway Nemko AS, Instituttveien 6, P.O. Box 96 Kjeller, 2007 Kjeller, Norway TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected] ENTERPRISE NUMBER NO974404532 nemko.com/no Test Report Product DECT Wireless Relay Station Name and address of the applicant Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor Newark, 07102-5490, NJ, USA Name and address of the manufacturer Panasonic Corporation 1-62, 4-chome, Minoshima, Hakata-ku Fukuoka, 812-8531, Japan Model KX-A407 Rating 5.5V DC 1A (Input: 120V AC 60Hz, 200mA) Trademark Panasonic Serial number / Additional information DECT 6.0 Tested according to FCC Part 15, subpart D Isochronous UPCS Device, 1920 – 1930 MHz Industry Canada RSS 213, Issue 3 2 GHz License-Exempt Personal Communications Services (LE-PCS) Devices Order number 379524 Tested in period 2020-01-29 to 2020-03-11 Issue date 2020-03-18 Name and address of the testing laboratory Instituttveien 6 Kjeller, Norway www.nemko.com CAB Number: FCC: NO0001 ISED: NO0470 TEL: +47 22 96 03 30 FAX: +47 22 96 05 50 An accredited technical test executed under the Norwegian accreditation scheme Prepared by [Frode Sveinsen] Approved by [G.Suhanthakumar] This report shall not be reproduced except in full without the written approval of Nemko. Opinions and interpretations expressed within this report are not part of the current accreditation. This report was originally distributed electronically with digital signatures. For more information please contact Nemko. TEST REPORT FCC part 15D Report no.: 379524-23-R00 FCC ID: ACJ96NKX-A407 IC: 216A-KXA407 Nemko Norway, Instituttveien 6, Kjeller, Norway Page 2 (64) CONTENTS 1 INFORMATION ................................................................................................................................. 3 1.1 Tested Item ........................................................................................................................................ 3 1.2 Description of Tested Device ............................................................................................................. 3 1.3 Test Conditions .................................................................................................................................. 4 1.4 Test Engineer(s) ................................................................................................................................ 4 1.5 Digital Modulation Techniques ........................................................................................................... 4 1.6 Labeling Requirements ...................................................................................................................... 4 1.7 Antenna Requirement ........................................................................................................................ 4 1.8 Channel Frequencies ......................................................................................................................... 5 1.9 Other Comments ............................................................................................................................... 5 2 TEST REPORT SUMMARY .............................................................................................................. 6 2.1 General .............................................................................................................................................. 6 2.2 Test Summary ................................................................................................................................... 7 3 TEST RESULTS ................................................................................................................................ 8 3.1 Power Line Conducted Emissions ..................................................................................................... 8 3.2 Automatic Discontinuation of Transmission ....................................................................................... 9 3.3 Peak Power Output .......................................................................................................................... 10 3.4 Emission Bandwidth B ..................................................................................................................... 14 3.5 Power Spectral Density ................................................................................................................... 17 3.6 In-Band Unwanted Emissions, Conducted ...................................................................................... 22 3.7 Out-of-band Emissions, Conducted ................................................................................................. 26 3.8 Carrier Frequency Stability .............................................................................................................. 44 3.9 Frame Repetition Stability ................................................................................................................ 45 3.10 Frame Period and Jitter ................................................................................................................... 45 3.11 Monitoring Threshold, Least Interfered Channel .............................................................................. 47 3.12 Threshold Monitoring Bandwidth ..................................................................................................... 49 3.13 Reaction Time and Monitoring Interval ............................................................................................ 50 3.14 Time and Spectrum Window Access Procedure .............................................................................. 52 3.15 Acknowledgements and Transmission Duration .............................................................................. 55 3.16 Dual Access Criteria Check .................................................................................…

Text truncated - open the document above for the full version.

TEST SET-UP PHOTOS Project no.: 379524 FCC ID: ACJ96NKX-A407 Page 1 (1) Power-line Conducted Emissions Test

Test Report No.ERJ13-20002R00FP 1 of 3 January 27, 2020 SECTION 5. PHOTOGRAPHS OF MAXIMUM EMISSION SET-UP 5.1 Radiated Emission, 30 MHz - 1000 MHz Test setup in accordance with ANSI C63.4 -2014 [Front view] [Rear view] Test Report No.ERJ13-20002R00FP 2 of 3 January 27, 2020 5.2 Radiated Emission, 1 GHz - 6 GHz Test setup in accordance with ANSI C63.4 -2014 [Front view] [Rear view] Test Report No.ERJ13-20002R00FP 3 of 3 January 27, 2020 5.3 Conducted Emission Test setup in accordance with ANSI C63.4 -2014 [Front view] [Side view]