ACJ96NKX-HNK102DECT 6.0 Keychain Remote

Operating Instructions Home Network System Keychain Remote Model No. KX-HNK102 Thank you for purchasing a Panasonic product. This document explains how to operate the keychain remote properly. For details about how to use the system, refer to the User’s Guide (page 12). Please read this document before using the unit and save it for future reference. For assistance, please contact us at 1-800-272-7033 or visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A. Please register your product: http://shop.panasonic.com/support In order to use this device: RDownload the latest version of the [Home Network] app. RUpdate your hub to the latest firmware version (version 5.50 or later). For more information, refer to the User’s Guide (page 12). Printed in China HNK102_(en_en_)_0616_ver.021.pdf 12015/06/16 18:14:13 Important Information Accessory information ...............3 About this system ......................4 For your safety ........................... 4 Important safety instructions ......5 For best performance ................5 Other information .......................6 Setup Part names and functions ..........8 LED indicator .............................8 Setup overview ..........................9 Inserting the battery .................10 Attaching the key ring ..............10 Registering the remote ............11 Wireless communication range .......................................11 Appendix Using the remote .....................12 Features available when using the [Home Network] app ................12 Accessing the User’s Guide ....12 Specifications ..........................13 FCC and other information ......14 Customer services ...................15 Limited Warranty (ONLY FOR U.S.A.) .....................................16 2 Table of Contents HNK102_(en_en_)_0616_ver.021.pdf 22015/06/16 18:14:13 Accessory information Supplied accessories No.Accessory item/Part numberQuantity A Battery * 1 1 BKey ring/PNGX1035Z1 *1 When replacing the battery, refer to the battery specifications noted under “ Power source” on page 13. A B Other information RD esign and specifications are subject to change without notice. RThe illustrations in these instructions may vary slightly from the actual product. Trademarks RiPhone and iPad are registered trademarks of Apple Inc. RAndroid is a trademark of Google Inc. RMicrosoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. RAll other trademarks identified herein are the property of their respective owners. For a ssistance, please visit http://shop.panasonic.com/support 3 Important Information HNK102_(en_en_)_0616_ver.021.pdf 32015/06/16 18:14:13 About this system RThis system is an auxiliary system; it is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation. RThe system’s wireless features are subject to interference, therefore functionality in all situations cannot be guaranteed. Panasonic will not be held responsible for injury or damage to property that occurs in the event of wireless communication error or failure. For your safety T o prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection RU se only the power source marked on the product. RDo not connect non-specified devices. Installation RT o prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. RDo not place or use this product near automatically controlled devices such as automatic doors a nd fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. Operating safeguards RD o not disassemble the product. Medical RC onsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. DECT features operate between 1.92 GHz and 1.93 GHz with a peak transmission power of 115 mW. RDo not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. CR Lithium battery RD o not recharge, disassemble, remodel, heat or throw it into fire. RDo not touch the terminals and with metal objects. RR isk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to local regulations. RIf any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. RIf any electrolyte should come into contact with your eyes, never rub your eyes. Rinse your eyes 4 For a ssistance, please visit http://shop.panasonic.com/support Important Information HNK102_(en_en_)_0616_ver.021.pdf 42015/06/16 18:14:13 thoroughly with water, and then c onsult a doctor. CAUTION CR Lithium battery RU se only the battery noted on page 3. RInsert the battery correctly. RDo not leave the battery in an automobile exposed to direct sunlight for a long period of time with the doors and windows closed. RRemove the battery if you do not use the product for a long period of time. Keep it in a cool, dark area. RDo not replace a battery with wet hands. RKeep out of the reach of small children. There is a risk of swallowing. If the battery is swallowed, seek medical attention immediately. RRemove the battery if it becomes unusable. There is a risk of leakage, overheating, and rupture. Do not attempt to use a battery if it is leaking. RExercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and…

Text truncated - open the document above for the full version.

Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7758 / [email protected] Richard Mullen, Group Manager Product Safety and Compliance Department Power of Attorney June 18, 2015 PCTP-15-F012 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Panasonic Corporation of North America hereby authorizes Nemko AS to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product, which are in compliance with FCC Part 15D. Any and all acts carried out by Nemko AS on our behalf shall have the same effects as acts of our own for a period of one year from the date of this letter. Type Filing: Original Application for DECT Keychain Remote, Model KX-HNK102 1 Product Classification: Part 15 Unlicensed PCS Transceiver in Keychain Remote FCC ID Handset Unit ACJ96NKX-HNK102 FCC Rule Part: FCC Part 15, Subpart D Frequency Range: 1921.536 ~ 1928.448 MHz Responsible Panasonic Corporation of North America Applicant & Grantee: Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Responsible Manufacturer: Panasonic System Networks Co., Ltd. Sincerely yours, Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Department 1 DECT Keychain Remote may be marketed with DECT Base, which is Part 15D certified under the following FCC IDs: ACJ96NKX- HNB600. Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7758 / [email protected] Richard Mullen, Group Manager Product Safety and Compliance Department Request for Confidentiality June 18, 2015 PCTP-15-F012 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Type Filing: Original Application for DECT Keychain Remote 2 Model Numbers: KX-HNK102 Product Description: Part 15 Unlicensed PCS Transceiver in DECT Keychain Remote FCC ID: ACJ96NKX-HNK102 In accordance with provisions of Sections 0.457 and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain: (1) Antenna Construction; (2) Description of Electrical Circuitry; (3) Schematic Diagrams of Base Unit and RF Unit; and (4) Base Unit Block Diagram. The transmitter is not user adjustable and does not have a Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection. In accordance with FCC Public DA 04-1705, we request forty-five day short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain: (1) External Photographs of Base Unit and RF Unit; (2) Internal Photographs of Base Unit and RF Unit; (3) Test Setup Photographs; and (4) User Manual. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Sincerely yours, Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Department 2 DECT Keychain Remote may be marketed with DECT Base, which is Part 15D certified under the following FCC IDs: ACJ96NKX- HNB600.

EXTERNAL PHOTOGRAPHS KX-HNK102 Top View

EXHIBIT B MARKINGS Keychain Remote: The keychain remote provides with the following sentences, or equivalent. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device. NOTE: Above markings are shown under the battery cover of the keychain remote.

INTERNAL PHOTOGRAPHS Internal View Main Board （Upside/Without shield） Main Board （downside）

Project no.: 279025 FCC ID: ACJ96NKX-HNK102 Page 1 (2) Nemko Canada, Inc. 303 River Road, Ottawa Ontario K1V1H2 Canada Letter of Explanation for Panasonic KX-HNK102 SAR Exemption FCC ID: ACJ96NKX-HNK102 Product Type: DECT Keychain Remote To Whom It May Concern DECT Keychain Remote SAR Exemption for TCB Certification under Part 15D This DECT Keychain Remote uses TDMA technology and operates in the UPCS frequency band at 1.9GHz. Operational Description The equipment is a DECT Keychain Remote that operates in the frequency range of 1921.536 to 1928.448 MHz with 5 RF channels and channel separation of 1.7 MHz. RF Exposure Conditions The Keychain Remote is designed to be attached to a key chain and is intended for handheld use in the portable exposure condition and General Population Uncontrolled exposure environment. Transmission Mode Each RF frame is 10ms and the frame is divided into 24 transmit slots. The Keychain Remote transmits one packet of 416 μ s length per 10ms frame. The duty cycle is (416μ s)/10ms = 4.16 % Project no.: 279025 FCC ID: ACJ96NKX-HNK102 Page 2 (2) RF Output Power TX Frequency Range: 1921.536 – 1928.448 MHz Pmax (incl. Tune-Up tolerance): 18.4 +1.0 = 19.4 dBm Maximum Duty Factor: 4.16 % Maximum Tune-Up Tolerance 1.0 dB Maximum source-based time-averaged output power, including Tune-Up Tolerance: 3.63 mW Max. power of channel:3.63mW Min. separation distance:5mm Max. frequency:1.925GHz [(Pwr/Dist)*√Freq.] = 1.0 The result of the above SAR threshold calculation demonstrates that the result is less than the 1-g numeric threshold of 3 and the 10-g numeric threshold of 7.5. Conclusion: The above analysis shows that the evaluated device qualifies for exemption from SAR testing. Frode Sveinsen Chief Engineer Nemko AS Kjeller, 24-June-2015

Report No. 279025-6 Template version: C Nemko Norway Nemko AS, Instituttveien 6, P.O. Box 96 Kjeller, 2007 Kjeller, Norway TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected] ENTERPRISE NUMBER NO974404532 nemko.com/no Test Report Product DECT Keychain Remote Name and address of the applicant Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor Newark, NJ 07102-5490 Name and address of the manufacturer Panasonic System Networks Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku Fukuoka 812-8531, Japan Model KX-HNK102 Rating 3.0V DC (Primary Battery, CR2, Lithium Battery) Panasonic Serial number / Additional information DECT 6.0, Keychain Remote Tested according to FCC Part 15, subpart D Isochronous UPCS Device, 1920 – 1930 MHz Industry Canada RSS 213, Issue 3 2 GHz License-exempt Personal Communications Service Devices (LE-PCS) Order number 279025 Tested in period 2015.06.10 to 2015.06.16 and 2015.06.29 Issue date 2015.06.29 Name and address of the testing laboratory Instituttveien 6 Kjeller, Norway FCC No: 994405 IC OATS: 2040D-1 TEL: (+47) 22 96 03 30 FAX: (+47) 22 96 05 50 Prepared by [Frode Sveinsen] Approved by [G. Suhanthakumar] This report shall not be reproduced except in full without the written approval of Nemko. Opinions and interpretations expressed within this report are not part of the current accreditation. This report was originally distributed electronically with digital signatures. For more information contact Nemko. TEST REPORT FCC part 15D Report no.: 279025-6 FCC ID: ACJ96NKX-HNK102 Nemko Norway, Instituttveien 6, Kjeller, Norway Page 2 (45) CONTENTS 1 INFORMATION ................................................................................................................................. 3 1.1 Tested Item........................................................................................................................................ 3 1.2 Description of Tested Device ............................................................................................................. 3 1.3 Exposure Evaluation .......................................................................................................................... 3 1.4 Test Environment .............................................................................................................................. 4 1.5 Test Engineer(s) ................................................................................................................................ 4 1.6 Test Equipment ................................................................................................................................. 4 1.7 Other Comments ............................................................................................................................... 4 2 TEST REPORT SUMMARY .............................................................................................................. 5 2.1 General .............................................................................................................................................. 5 2.2 Test Summary ................................................................................................................................... 6 3 TEST RESULTS ................................................................................................................................ 7 3.1 Digital Modulation Techniques .......................................................................................................... 7 3.2 Labeling Requirements ..................................................................................................................... 7 3.3 Channel Frequencies ........................................................................................................................ 7 3.4 Antenna Requirement........................................................................................................................ 8 3.5 Automatic Discontinuation of Transmission ...................................................................................... 8 3.6 Peak Power Output ........................................................................................................................... 9 3.7 Emission Bandwidth B ..................................................................................................................... 12 3.8 Power Spectral Density ................................................................................................................... 15 3.9 In-Band Unwanted Emissions, Conducted ...................................................................................... 18 3.10 Out-of-band Emissions, Conducted................................................................................................. 20 3.11 Carrier Frequency Stability .............................................................................................................. 26 3.12 Frame Repetition Stability ............................................................................................................... 27 3.13 Frame Period and Jitter ................................................................................................................... 27 3.14 Monitoring Threshold, Least Interfered Channel ............................................................................. 29 3.15 Threshold Monitoring Bandwidth ..................................................................................................... 31 3.16 Reaction Time and Monitoring Interval ............................................................................................ 32 3.17 Time and Spectrum Window Access Procedure ............................................................................. 34 3.18 Acknowledgements and Transmission Duration ............................................................................. 35 3.19 Dual Access Criteria Check ........................…

Text truncated - open the document above for the full version.

PCTP-15-F012 FCC ID: ACJ96NKX-HNK102 FCC Part 15D – Compliance Information pctp-15-f012 (part_15d-compliance_information for acj96nkx-hnk102) 8-Dec-2006 page 1 (4) rev.1.4 EUT AND PRODUCT INFORMATION Type of Equipment UPCS (DECT 6.0) Applicant Name Panasonic Corporation of North America Responsible Mfr Name Panasonic System Networks Co., Ltd. Communication system Business Unit Address 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Contact Junji Sumi FP PP EUT Type/System FCC ID ACJ96NKX-HNB600 (IC:216A- KXHNB600) ACJ96NKX-HNK102 (IC:216A-KXHNK102) Model name KX-HNB600 KX-HNK102 HW Version PNLB2370xx PNLB1239xx SW Version SW502 SW406 Max antenna Gain (dBi) 0dBi 0dBi Can the EUT be Initiating Device YES YES Does the EUT transmit signaling channels YES YES Max number of slots in use simultaneously 1 slot 1 slot Test standard: FCC part 15D Other: Industry Canada RSS-213, Issue 2 Frequency Band 1921.536 – 1928.448 MHz # of RF Channels 5 Frame Period 10 ms Max. Burst length 417us / duplex channel Min. Burst Length 417us / signaling channel # of Logical Channels 60 (12 duplex channels per RF carrier) Operating Mode Simplex Duplex PCTP-15-F012 FCC ID: ACJ96NKX-HNK102 FCC Part 15D – Compliance Information pctp-15-f012 (part_15d-compliance_information for acj96nkx-hnk102) 8-Dec-2006 page 2 (4) rev.1.4 ANTENNAS Base (FP) Antenna Type Internal External 1 Wire Antenna 2 Pattern Antenna 3 Wire Antenna 4 Pattern Antenna Does RX and TX use the same antenna(s)? Yes No Keychain Remote (PP) Antenna Type Internal External 1 Wire Antenna Does RX and TX use the same antenna(s)? Yes No ANTENNA DIVERSITY Antenna Diversity Supported TX RX Base (FP) 1 2 3 4 Keychain Remote (PP) 1 2 VOLTAGE AND TEMPERATURE RANGES VOLTAGES FP PP Nominal Voltage 120V AC 3V DC Cut-Off Voltage (if applicable) - 2.15V DC - POWER SOURCE Type Manufacturer Base or Repeater PNLV236 (AC Adaptor) Panasonic Keychain Remote (PP) CR2(Lithium Battery) Panasonic Data Connections PSTN (Base) Others (please specify) .... PCTP-15-F012 FCC ID: ACJ96NKX-HNK102 FCC Part 15D – Compliance Information pctp-15-f012 (part_15d-compliance_information for acj96nkx-hnk102) 8-Dec-2006 page 3 (4) rev.1.4 ANCILLARY EQUIPMENT Description AC Adaptor Type PNLV236 (AC Adaptor) Manufacturer Panasonic HOST DEVICE Description Type Manufacturer ADDITIONAL INFORMATION PCTP-15-F012 FCC ID: ACJ96NKX-HNK102 FCC Part 15D – Compliance Information pctp-15-f012 (part_15d-compliance_information for acj96nkx-hnk102) 8-Dec-2006 page 4 (4) rev.1.4 MANUFACTURERS DECLARATIONS FCC part 15.323 (c)(5) No device or group of co-operating devices located within 1m of each other shall during any frame period occupy more than 6 MHz of aggregate bandwidth, or alternatively, more than one third of the time and spectrum windows defined by the system. Applicant Agrees Yes No FCC part 15.323 (c)(10) The applicant hereby declares that the system in this application does use the criteria of (c)(10) of this section. Applicant Agrees Yes No FCC part 15.323 (c)(11) The applicant hereby declares that system in this application does not use the criteria of (c)(11) of this section. Applicant Agrees Yes No FCC part 15.323 (c)(12) The provisions of (c)(10) or (c)(11) of this section shall not be used to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. Applicant Agrees Yes No FCC part 15.307 (b) The Applicant is a participating member of UTAM, Inc. and will provide an affidavit from UTAM, Inc. certifying this. Confirmed By Applicant Yes No ADDITIONAL REMARKS: > DECLARED BY: June 18, 2015 Richard Mullen

TEST SET-UP PHOTOS Project no.: 279025 FCC ID: ACJ96NKX-HNK102 Page 1 (1) PHOTOS OF TEST SET-UP – KX-HNK102 RF Conducted Tests