ACJ96NKX-PRSA10DECT 6.0 Handset

Operating Instructions Premium Design Phone Model No. KX-PRS120 Before initial use, see “Getting Started” on page 9. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte “Guía Rápida Española”, página 49. For assistance, visit our Web site: http://www.panasonic.com/help for customers in the U.S.A. or Puerto Rico. Please register your product: http://www.panasonic.com/prodreg PRS120(en)_1016_ver041.pdf 12013/10/16 15:40:52 Introduction Accessory information ..................................3 Important Information For your safety .............................................5 Important safety instructions ........................6 For best performance ...................................6 Other information .........................................7 Specifications ...............................................7 Getting Started Setting up .....................................................9 Intelligent eco mode ...................................10 Controls ......................................................11 Display icons ..............................................11 Language setting ........................................12 Date and time .............................................12 Other settings .............................................12 Making/Answering Calls Making calls ...............................................14 Answering calls ..........................................14 Useful features during a call .......................14 Intercom .....................................................16 Phonebook Phonebook .................................................17 Speed dial ..................................................19 Programming Menu list .....................................................21 Alarm ..........................................................27 Silent mode ................................................27 Call block ....................................................28 Baby monitor ..............................................29 Other programming ....................................31 Registering a unit .......................................32 Caller ID Service Using Caller ID service ...............................33 Caller list ....................................................33 Answering System Answering system ......................................35 Turning the answering system on/off .........35 Greeting message ......................................35 Listening to messages ...............................36 Advanced new message alerting features ......................................................37 Remote operation .......................................38 Answering system settings .........................40 Useful Information Voice mail service ......................................41 Error messages ..........................................42 Troubleshooting .........................................43 FCC and other information .........................47 Guía Rápida Española Guía Rápida Española ...............................49 Appendix Customer services .....................................53 Warranty (For United States and Puerto Rico) ...........................................................54 Index Index...........................................................56 2 Table of Contents PRS120(en)_1016_ver041.pdf 22013/10/16 15:40:53 Accessory information Supplied accessories No.Accessory item/Order numberQuantity AAC adaptor/PNLV226Z1 BTelephone line cord/PQJA10075Z1 CRechargeable batteries/HHR-4DPA2 D Handset cover *1 /PNYNPRSA10WR 1 *1 The handset cover comes attached to the handset. ABCD Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 53). Accessory itemOrder number Rechargeable batteries HHR-4DPA *1 RTo order, please call 1-800-332-5368 or visit http://www.panasonic.com/batterystore Battery type: – Nickel metal hydride (Ni-MH) – 2 x AAA (R03) size for each handset T-adaptorKX-J66 Range extender KX-TGA405 *2 Key detector KX-TGA20 *3 *1 Replacement batteries may have a different capacity from that of the supplied batteries. *2 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://www.panasonic.com/RangeExtender *3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is attached. Please visit our Web site: http://panasonic.net/pcc/products/telephone/p/tga20/ Other information RDesign and specifications are subject to change without notice. RThe illustrations in these instructions may vary slightly from the actual product. For assistance, please visit http://www.panasonic.com/help 3 Introduction PRS120(en)_1016_ver041.pdf 32013/10/16 15:40:53 Expanding your phone system Handset (optional): KX-PRSA10 You can expand your phone system by registering optional handsets (6 max.) to a single base unit. ROptional handsets may be a different color from that of the supplied handsets. 4 For assistance, please visit http://www.panasonic.com/help Introduction PRS120(en)_1016_ver041.pdf 42013/10/16 15:40:53 For your safety To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection RUse only the power source marked on the product. RDo not overload power outlets and extension cords. This can result in the risk of fire or electric shock. RCompletely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. RRegularly remove any dust, etc. from the AC adaptor/power plug by pulli…

Text truncated - open the document above for the full version.

Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7758 / [email protected] Richard Mullen, Group Manager Product Safety and Compliance Division Power of Attorney August 8, 2013 PCTP-13-F002 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Panasonic Corporation of North America hereby authorizes Nemko AS to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product, which are in compliance with FCC Part 15D. Any and all acts carried out by Nemko AS on our behalf shall have the same effects as acts of our own for a period of one year from the date of this letter. Type Filing: Original Application for DECT Cordless Telephone Handset, Model KX-PRSA10 1 Product Classification: Part 15 Unlicensed PCS Portable Tx Held to Ear (PUE) FCC ID Handset Unit ACJ96NKX-PRSA10 FCC Rule Part: FCC Part 15, Subpart D Frequency Range: 1921.536 ~ 1928.448 MHz Responsible Panasonic Corporation of North America Applicant & Grantee: Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Responsible Manufacturer: Panasonic System Networks Co., Ltd. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division 1 DECT Handset under FCC ID: ACJ96NKX-PRSA10 may be marketed with DECT Bases, which will be Part 15D certified under FCC ID: ACJ96NKX-PRS120. Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7758 / [email protected] Richard Mullen, Group Manager Product Safety and Compliance Division Request for Confidentiality August 8, 2013 PCTP-13-F002 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Type Filing: Original Application for DECT Cordless Telephone Handset, Model KX-PRSA10 Product Classification: Part 15 Unlicensed PCS Portable Tx Held to Ear (PUE) FCC ID Handset Unit ACJ96NKX-PRSA10 FCC Rule Part: FCC Part 15, Subpart D In accordance with provisions of Sections 0.457 and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain: (1) Antenna Construction; (2) Description of Electrical Circuitry; (3) Schematic Diagrams of Handset Unit and RF Unit; and (4) Block Diagram. The transmitter is not user adjustable and does not have a Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection. In accordance with FCC Public DA 04-1705, we request forty-five day short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain: (1) External Photographs of Handset Unit and RF Unit; (2) Internal Photographs of Handset Unit and RF Unit; (3) Test Setup Photographs; and (4) User Manual. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division

EXTERNAL PHOTOGRAPHS Top View Bottom View

EXHIBIT B MARKINGS Portable Unit: FCC ID Label: The marking will be shown on the battery compartment of the portable unit. NOTE: The portable unit is sold without the battery installed. Nameplate: The nam eplate is located on the battery compartment of the portable unit.

INTERNAL PHOTOGRAPHS Internal View (Top) RF portion without cover Internal View (Bottom)

The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. SAR_Report_Nemko_60320_6130313_FCC_DECT_KX-PRSA10_Confidential_V2 Page 1 of 29 Report Dosimetric Assessment of the Portable Device KX-PRSA10 (FCC ID: ACJ96NKX-PRSA10) (IC: 216A-KXPRSA10) According to the FCC Requirements September 12, 2013 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Panasonic System Networks Co., Ltd. 1 - 62, 4 - chome Minoshima, Hakata, Fukuoka 812-8531 Japan This revised version of the report supersedes all previous versions. The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. This version supersedes all previous versions of this report. SAR_Report_Nemko_60320_6130313_FCC_DECT_KX-PRSA10_Confidential_V2 Page 2 of 29 Dasy_Report_FCC_DECT_1900_1.4.doc/10.07.2013/AvB Executive Summary The KX-PRSA10 is a new cordless phone (Portable Device) from Panasonic operating in the 1920 MHz frequency range. The device has an integrated antenna and works in US DECT standard. The objective of the measurements done by IMST was the dosimetric assessment of one device in a worst case setup in head configuration. The handset was set to use one specific frequency and maximum output power during the measurement. The examinations have been carried out with the dosimetric assessment system „DASY4“. The measurements were made according to the 47 CFR § 2.1093 [47CFR] for evaluating compliance of mobile and portable devices with FCC limits for human exposure (general population) to radiofrequency emissions, IEEE 1528-2003 [IEEE1528-2003] and IC RSS 102 Issue 4. Additional information and guidelines given by the following FCC documents were used:  SAR Measurement Requirements for 100 MHz to 6 GHz [KDB 865664 D01 v01r01]  Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies [KDB 447498 D01 v05r01] All measurements have been performed in accordance to the recommendations given by SPEAG. SAR_Report_Nemko_60320_6130313_FCC_DECT_KX-PRSA10_Confidential_V2 Page 3 of 29 Dasy_Report_FCC_DECT_1900_1.4.doc/10.07.2013/AvB Compliance Statement The device KX-PRSA10 from Panasonic (FCC ID: ACJ96NKX-PRSA10, IC: 216A- KXPRSA10) is in compliance with the following standards for uncontrolled exposure:  47 CFR § 2.1093 [47CFR]  IC RSS 102 Issue 4 [RSS 102],  IEEE Std. C95.1 - 1999 [C95.1-1999],  IEEE Std. C95.3 - 2002 [C95.3-2002],  IEEE 1528-2003 [IEEE 1528-2003],  The latest version of all relevant FCC OET KDB Procedures The maximum results of SAR for the KX-PRSA10 are as follows: Band Frequency [MHz] CH Phantom Configuration Figure No. Highest Measured SAR 1g [W/kg] Highest Reported SAR 1g [W/kg] Plot No. US DECT 1924.992 2 Left Head Cheek 13 0.016 0.016 1 prepared by: ........................................ reviewed by: ..................................... Alexander Rahn André van den Bosch test engineer quality assurance engineer SAR_Report_Nemko_60320_6130313_FCC_DECT_KX-PRSA10_Confidential_V2 Page 4 of 29 Dasy_Report_FCC_DECT_1900_1.4.doc/10.07.2013/AvB Table of Contents 1 SUBJECT OF INVESTIGATION .......................................................................................................... 5 2 THE IEEE STANDARD C95.1-1999 AND THE FCC EXPOSURE CRITERIA .................................... 5 2.1 DISTINCTION BETWEEN EXPOSED POPULATION, DURATION OF EXPOSURE AND FREQUENCIES ........... 5 2.2 DISTINCTION BETWEEN MAXIMUM PERMISSIBLE EXPOSURE AND SAR LIMITS .................................... 6 2.3 SAR LIMIT ..................................................................................................................................... 6 3 THE FCC MEASUREMENT PROCEDURE ......................................................................................... 7 3.1 GENERAL REQUIREMENTS .............................................................................................................. 7 3.2 DEVICE OPERATING NEXT TO A PERSON’S EAR ................................................................................ 7 3.2.1 PHANTOM REQUIREMENTS ......................................................................................................... 7 3.2.2 TEST POSITIONS ........................................................................................................................ 7 3.2.3 TEST TO BE PERFORMED .......................................................................................................... 10 3.2.4 MEASUREMENT VARIABILITY ..................................................................................................... 10 4 BODY-WORN CONFIGURATIONS ................................................................................................... 11 4.1 POC (PTT) POSITION ................................................................................................................... 11 4.2 PHANTOM REQUIREMENTS ............................................................................................................ 11 4.3 TEST TO BE PERFORMED .............................................................................................................. 11 5 THE MEASUREMENT SYSTEM ........................................................................................................ 12 5.1 PHANTOMS................................................................................................................................... 13 5.2 E-FIELD-PROBES ......................................................................................................................... 14 5.3 MEASUREMENT PROCEDURE ........................................................................................................ 15 5.4 UNCERTAINTY ASSESSMENT .....................…

Text truncated - open the document above for the full version.

The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. SAR_Report_Nemko_60320_6130313_FCC_DECT_KX-PRSA10_Plots Page 1 of 5 Appendix for the Report Dosimetric Assessment of the Portable Device KX-PRSA10 (FCC ID: ACJ96NKX-PRSA10) (IC: 216A-KXPRSA10) According to the FCC Requirements SAR Distribution Plots September 12, 2013 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Panasonic System Networks Co., Ltd. 1 - 62, 4 - chome Minoshima, Hakata, Fukuoka 812-8531 Japan The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. This version supersedes all previous versions of this report. SAR_Report_Nemko_60320_6130313_FCC_DECT_KX-PRSA10_Plots Page 2 of 5 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo 1 SAR Distribution Plots, Head Measurement Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: PRSA10W_yplm_1.da4 DUT: Panasonic; Type: KX-PRSA10; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.4 mho/m; ε r = 39.7; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.41, 8.41, 8.41); Calibrated: 24.09.2012 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 18.02.2013 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Cheek Left/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.016 mW/g Cheek Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.95 V/m; Power Drift = -0.197 dB Peak SAR (extrapolated) = 0.029 W/kg SAR(1 g) = 0.016 mW/g; SAR(10 g) = 0.0076 mW/g Maximum value of SAR (measured) = 0.018 mW/g Fig. 1: SAR distribution for DECT US, channel 2, cheek position, left side of head, (September 09, 2013). SAR_Report_Nemko_60320_6130313_FCC_DECT_KX-PRSA10_Plots Page 3 of 5 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: PRSA10W_yplm_2.da4 DUT: Panasonic; Type: KX-PRSA10; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.4 mho/m; ε r = 39.7; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.41, 8.41, 8.41); Calibrated: 24.09.2012 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 18.02.2013 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Tilted Left/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.011 mW/g Tilted Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.52 V/m; Power Drift = -0.141 dB Peak SAR (extrapolated) = 0.021 W/kg SAR(1 g) = 0.011 mW/g; SAR(10 g) = 0.00563 mW/g Maximum value of SAR (measured) = 0.012 mW/g Fig. 2: SAR distribution for DECT US, channel 2, tilted position, left side of head, (September 09, 2013). SAR_Report_Nemko_60320_6130313_FCC_DECT_KX-PRSA10_Plots Page 4 of 5 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: PRSA10W_yprm_1.da4 DUT: Panasonic; Type: KX-PRSA10; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.4 mho/m; ε r = 39.7; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.41, 8.41, 8.41); Calibrated: 24.09.2012 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 18.02.2013 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Cheek Right/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.018 mW/g Cheek Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.86 V/m; Power Drift = -0.198 dB Peak SAR (extrapolated) = 0.026 W/kg SAR(1 g) = 0.015 mW/g; SAR(10 g) = 0.00802 mW/g Maximum value of SAR (measured) = 0.017 mW/g Fig. 3: SAR distribution for DECT US, channel 2, cheek position, right side of head, (September 09, 2013). SAR_Report_Nemko_60320_6130313_FCC_DECT_KX-PRSA10_Plots Page 5 of 5 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: PRSA10W_yprm_2.da4 DUT: Panasonic; Type: KX-PRSA10; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.4 mho/m; ε r = 39.7; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.41, 8.41, 8.41); Calibrated: 24.09.2012 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 18.02.2013 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Tilted Right/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.013 mW/g Tilted Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.87 V/m; Power Drift = -0.132 dB Peak SAR (extrapolated) = 0.020 W/kg SAR(1 g) = 0.011 mW/g; SAR(10 g) = 0.00533 mW/g Maximum value of SAR (measured) = 0.012 mW/g Fig. 4: SAR distribution for DECT US, channel 2, tilted position, right side of head, (September 09, 2013)

The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. SAR_Report_Nemko_60320_6130313_FCC_KX-PRSA10_CalData_V2 Appendix for the Report Dosimetric Assessment of the Portable Device Panasonic KX-PRSA10 (FCC ID: ACJ96NKX-PRSA10) (IC: 216A-KXPRSA10) According to the FCC Requirements Calibration Data September 12, 2013 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Panasonic System Networks Co., Ltd. 1 - 62, 4 - chome Minoshima, Hakata, Fukuoka 812-8531 Japan SAR_Report_FCC_DECT_1900_1.2.doc/25.11.2011/AR The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. Cal_D1900V2_SN5d051_Sep2013 Page 1 of 7 Calibration Certificate Certificate No: Cal_D1900V2_SN5d051_Sep2013 Object: D1900V2 SN: 5d051 Date of Calibration: September 03, 2013 Next Calibration: September 2015 Object Condition: In Tolerance Calibration Equipment used: Test Equipment Serial Number Last calibration Calibrated by Next calibration Powermeter E4416A GB41050414 Nov 12 Rohde&Schwarz (262487-D-K-15012- 01-00-2012-11) Nov 14 Power Sensor E9301H US40010212 Nov 12 Rohde&Schwarz (262492-D-K-15012- 01-00-2012-11) Nov 14 Powermeter E4417A GB41050441 Nov 12 Rohde&Schwarz (262488-D-K-15012- 01-00-2012-11) Nov 14 Power Sensor E9301A MY41495584 Nov 12 Rohde&Schwarz (262489-D-K-15012- 01-00-2012-11) Nov 14 Network Analyzer E5071C MY46103220 Jul 13 Rohde&Schwarz (11-300285997) Jul 15 Reference Probe ET3DV6 SN 1669 Feb 13 SPEAG (ET3-1669_Feb13/2) Feb 14 DAE4 SN 631 Sep 12 SPEAG (DAE4-631_Sep12) Sep 13 Cal_D1900V2_SN5d051_Sep2013 Page 2 of 7 Calibration is performed according the following standards: IEEE 1528-2003 "IEEE Recommended Practice for Determining the Peak Spatial - Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communication Devices: Measurement Technique", December 2003 IEC 62209-1 "Procedure to measure the Specific Absorption Rate (SAR) for hand - held devices used in close proximity to the ear (frequency range of 300 MHz to 3GHz)", February 2005 IEC 62209-2 "Evaluation of Human Exposure to Radio Frequency Fields from Handheld and Body-Mounted Wireless Communication Devices in the Frequency Range of 30 MHz to 6 GHz: Human models, Instrumentation, and Procedures ", Part 2: “Procedure to determine the Specific Absorption Rate (SAR) for including accessories and multiple transmitters” Edition 1.0, 2010-01 Additional Documentation: DASY 4/5 System Handbook prepared by: reviewed by: Alexander Rahn André van den Bosch test engineer quality assurance engineer 08 Cal_D1900V2_SN5d051_Sep2013 Page 3 of 7 Measurement Conditions DASY Version: Dasy 4; V4.7 Phantom: SAM Phantom 1059 Distance Dipole Center – TSL: 10mm With spacer Area Scan resolution dx, dy = 10mm Zoom Scan resolution dx, dy, dz = 5mm Frequency: 1900 MHz ± 1MHz Head TSL Parameters Temperature Permittivity Conductivity Nominal Head TSL Parameters 22.0 40.00 1.40 Measured Head TSL Parameters 21.5 38.9 ± 6% 1.42 S/m ± 6% SAR Result with Head TSL Averaged over 1g SAR measured 250 mW input power 9.43 mW/g SAR normalized normalized to 1W 37.72 mW/g SAR for nominal Head TSL parameters normalized to 1W 37.17 mW/g ± 16.5 % (k=2) Averaged over 10g SAR measured 250 mW input power 4.96 mW/g SAR normalized normalized to 1W 19.84 mW/g SAR for nominal Head TSL parameters normalized to 1W 19.66 mW/g ± 16.5 % (k=2) Cal_D1900V2_SN5d051_Sep2013 Page 4 of 7 Body TSL Parameters Temperature Permittivity Conductivity Nominal Body TSL Parameters 22.0 53.30 1.52 Measured Body TSL Parameters 21.9 54.10 ± 6% 1.53 S/m ± 6% SAR Result with Body TSL Averaged over 1g SAR measured 250 mW input power 9.47 mW/g SAR normalized normalized to 1W 37.88 mW/g SAR for nominal Body TSL parameters normalized to 1W 37.86 mW/g ± 16.5 % (k=2) Averaged over 10g SAR measured 250 mW input power 5.04 mW/g SAR normalized normalized to 1W 20.16 mW/g SAR for nominal Body TSL parameters normalized to 1W 20.15 mW/g ± 16.5 % (k=2) General Antenna Parameters Antenna Parameters with Head TSL Impedance, transformed to feed point 48.1 Ω + 0.25 jΩ Return Loss -34.40 dB Antenna Parameter with Body TSL Impedance, transformed to feed point 51.6 Ω – 2.20 jΩ Return Loss -31.40 dB After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semigrid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short-circuited for DC signals. Additional EUT Data Manufactured by: SPEAG Manufactured on: May, 2004 Cal_D1900V2_SN5d051_Sep2013 Page 5 of 7 SAR Result with Head TSL Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 030913_b_1669.da4 DUT: Dipole 1900 MHz SN: 5d051; Type: D1900V2; Serial: D1900V2 - SN5d051 Program Name: System Performance Check at 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.42 mho/m; ε r = 38.9; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(5.05, 5.05, 5.05); Calibrated: 19.02.2013 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 20.09.2012 - Phantom: SAM Sugar 1059; Type: Speag; Serial: 1059 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 10.7 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 93.0 V/m; Power Drift = -0.124 dB Peak SAR (extrapolated) = 16.5 W/kg SAR(1 g) = 9.43 mW/g; SAR(…

Text truncated - open the document above for the full version.

Report No. 243524-2 Template version: B Nemko Norway Nemko AS, Instituttveien 6, P.O. Box 96 Kjeller, 2007 Kjeller, Norway TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected] ENTERPRISE NUMBER NO974404532 nemko.com/no Test Report Product UPCS Handset Name and address of the applicant Panasonic Corporation of North America Name and address of the manufacturer Panasonic System Networks Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku Fukuoka 812-8531, Japan Model KX-PRSA10 Rating / Trademark Panasonic Serial number / Additional information / Tested according to FCC Part 15, subpart D Isochronous UPCS Device, 1920 – 1930 MHz Industry Canada RSS 213, Issue 2 2 GHz License-exempt Personal Communications Service Devices (LE-PCS) Order number 243524 Tested in period 2013.08.08 to 2013.09.09 Issue date 2013.10.10 Name and address of the testing laboratory Instituttveien 6 Kjeller, Norway FCC No: 994405 IC OATS: 2040D-1 TEL: (+47) 22 96 03 30 FAX: (+47) 22 96 05 50 Prepared by [Frode Sveinsen] Approved by [Jan G Eriksen] This report shall not be reproduced except in full without the written approval of Nemko. Opinions and interpretations expressed within this report are not part of the current accreditation. This report was originally distributed electronically with digital signatures. For more information contact Nemko. TEST REPORT FCC part 15D Report no.: 243524-2 FCC ID: ACJ96NKX-PRSA10 Nemko Norway, Instituttveien 6, Kjeller, Norway Page 2 (49) CONTENTS 1 INFORMATION ................................................................................................................................. 3 1.1 Tested Item........................................................................................................................................ 3 1.2 Description of Tested Device ............................................................................................................. 3 1.3 Exposure Evaluation .......................................................................................................................... 3 1.4 Test …

Text truncated - open the document above for the full version.