ACJ96NKX-PRX12096NKX-PRX120

Operating Instructions Premium Design Phone with Touchscreen Model No. KX-PRX120 Thank you for purchasing a Panasonic product. Please read this document and save it for future reference. For assistance, visit our Web site: http://www.panasonic.com/help for customers in the U.S.A. or Puerto Rico. Please register your product: http://www.panasonic.com/prodreg Introduction Accessory information ..................................3 Important Information For your safety .............................................6 Important safety instructions ........................8 For best performance ...................................8 Other information .........................................9 End-user license ..........................................9 Open source software notice .....................10 Disclaimer ..................................................10 Specifications .............................................10 Getting Started Preparing the base unit ..............................12 Preparing the charger ................................12 Preparing the handset ................................13 Information about power and charging .......15 Getting to know your phone system ...........16 Turning the handset on and off ..................17 Setup wizard ..............................................18 Home screen ..............................................19 Status and notifications ..............................20 Landline app ...............................................20 Phone Features Making calls ...............................................22 Using other features during a call ..............23 Answering calls ..........................................24 Using the call logs ......................................25 Phonebook Features Adding contacts ..........................................28 Calling contacts ..........................................28 Managing contacts .....................................29 Speed dialing .............................................29 Answering System Features (KX-PRX120 only) Message recording features .......................30 Answering system ......................................30 Turning the answering system on and off ...............................................................30 Greeting messages ....................................30 Playing your messages ..............................31 Remote operation features .........................33 Answering system settings .........................36 Other Features and Settings Ringtones and audio settings .....................39 Silent mode ................................................40 Auto talk .....................................................40 Blocking incoming calls (call block) ............40 Phone number conversion codes ...............42 Flash time ...................................................42 Line mode ..................................................42 Tone/pulse setting ......................................43 Display language ........................................43 Date and time .............................................43 Wi-Fi settings .............................................44 Google™ account ......................................44 Caller ID support ........................................44 Voicemail ....................................................45 Expanding Your Phone System Adding handsets ........................................47 Intercom features .......................................48 Using key detectors ....................................49 Other Information Phone settings overview ............................52 Included apps .............................................54 Status icons ................................................56 Notification icons ........................................57 Control panel settings ................................58 Troubleshooting .........................................59 Updating the software ................................63 Wall mounting ............................................64 FCC and other information .........................65 Appendix Customer services .....................................67 Warranty (For United States and Puerto Rico) ...........................................................68 Index Index...........................................................70 2 Table of Contents Accessory information Supplied accessories No.Accessory item/Order numberQuantity AAC adaptor for base unit/PNLV226Z1 BAC adaptor for charger/PNLV226KZ1 CTelephone line cord/PQJA10075Z1 DRechargeable battery/KX-PRA10EX1 E Handset cover *1 /M81101016740 1 FCharger/PNLC1049ZW1 *1 The handset cover comes attached to the handset. A B C D E F Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 67). Accessory itemOrder number Rechargeable batteryKX-PRA10EX RLithium Ion (Li-Ion) type battery RTo order, please visit http://www.panasonic.com/batterystore Headset RP-TCM120 *1 T-adaptorKX-J66 Range extender KX-TGA405 *2 Key detector KX-TGA20 *3 *1 Contact Panasonic or the authorized sales department listed on the back cover for the headset available in your area. *2 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://www.panasonic.com/RangeExtender *3 You can register up to 4 optional key detectors to your phone system. By registering a key detector to the base unit and then attaching the key detector to an easily misplaced item, such as your house or car keys, you can use your handset to find the item. For more information, visit the following web site. http://panasonic.net/pcc/products/telephone/p/tga20/ For assistance, please visit http://www.panasonic.com/help 3 Introduction Expanding your phone system Handset (optional): KX-PRXA10 You can expand your phone system by registering op…

Text truncated - open the document above for the full version.

EXHIBIT A STATEMENT OF SECURITY CODE This cordless telephone system has more than 1,000 billion combinations that are provided by the following means:  Provided with 128 bits for security codes.  When shipped from the factory, the security code is decided by the manufacture. It is memorized in a memory IC.  Base and Handset knows each other’s security code information.

Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7758 / [email protected] Richard Mullen, Group Manager Product Safety and Compliance Division Power of Attorney December 5, 2013 PCTP-14-F001 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; We, the undersigned, Panasonic Corporation of North America, hereby authorizes Nemko AS to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product in compliance with FCC Part 15C and D. Any and all acts carried out by Nemko AS on our behalf shall have the same effects as acts of our own for a period of one year from the date of this letter. Type Filing: Original Application for 1.9 GHz DECT Cordless Telephone Base Station 1 Product Description: Base Station contains DECT Transmitter FCC ID: ACJ96NKX-PRX120 Type Equipment for DECT: Isochronous UPCS Base Station (PUB) FCC Rule Part: FCC Part 15, Subpart D Frequency Range: 1921.536 ~ 1928.448 Number Channels: 5 RF Channels / 5x12 = 60 TDMA Duplex Channels RF Exposure: Mobile / MPE (requires minimum 20cm spacing between antenna and body) Responsible Panasonic Corporation of North America Applicant & Grantee: Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Responsible Manufacturer: Panasonic System Networks Co., Ltd. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division 1 Base Station will be used with Handset, which will be separately certified under FCC ID: ACJ96NKX-PRXA10. Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7758 / [email protected] Richard Mullen, Group Manager Product Safety and Compliance Division Request for Confidentiality December 5, 2013 PCTP-14-F001 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Type Filing: Original Application for 1.9 GHz DECT Cordless Telephone Base Station Product Description: Base Station contains DECT Transmitter FCC ID: ACJ96NKX-PRX120 In accordance with provisions of Sections 0.457 and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain: (1) Antenna Construction; (2) Description of Electrical Circuitry; (3) Schematic Diagrams of Base Unit and RF Unit; and (4) Base Unit Block Diagram. The transmitter is not user adjustable and does not have a Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection. In accordance with FCC Public DA 04-1705, we request forty-five day short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain: (1) External Photographs of Base Unit and RF Unit; (2) Internal Photographs of Base Unit and RF Unit; (3) Test Setup Photographs; and (4) User Manual. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division

PCTP-14-F001/F002 FCC IDs: ACJ96NKX-PRX120 / ACJ96NKX-PRXA10 FCC Part 15D – Compliance Information pctp-14-f001_f002 (kx-prx120 fcc_part_15d-compliance_information) 8-Dec-2006 page 1 (4) rev.1.4 EUT AND PRODUCT INFORMATION Type of Equipment UPCS (DECT 6.0) Applicant Name Panasonic Corporation of North America Responsible Mfr Name Panasonic System Networks Co., Ltd. Communication system Business Unit Address 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Contact Junji Sumi FP PP EUT Type/System FCC ID ACJ96NKX-PRX120 (IC:216A-KXPRX120) ACJ96NKX-PRXA10 (IC:216A-KXPRXA10) Model name KX-PRX120 KX-PRXA10 HW Version PNLB1895xx KX-PRXA10xxR-UM SW Version US_SW2316 US_SW2316 Max antenna Gain (dBi) 0dBi 0dBi Can the EUT be Initiating Device YES YES Does the EUT transmit signaling channels YES YES Max number of slots in use simultaneously 1 slot 1 slot Test standard: FCC part 15D Other: Industry Canada RSS-213, Issue 2 Frequency Band 1921.536 – 1928.448 MHz # of RF Channels 5 Frame Period 10 ms Max. Burst length 417us / duplex channel Min. Burst Length 106us / signaling channel # of Logical Channels 60 (12 duplex channels per RF carrier) Operating Mode Simplex Duplex PCTP-14-F001/F002 FCC IDs: ACJ96NKX-PRX120 / ACJ96NKX-PRXA10 FCC Part 15D – Compliance Information pctp-14-f001_f002 (kx-prx120 fcc_part_15d-compliance_information) 8-Dec-2006 page 2 (4) rev.1.4 ANTENNAS Antenna Type Internal External 1 Wired Antenna 2 Wired Antenna 3 4 Base (FP) Does RX and TX use the same antenna(s)? Yes No Antenna Type Internal External 1 Pattern Antenna 2 Handset (PP) Does RX and TX use the same antenna(s)? Yes No ANTENNA DIVERSITY Diversity Supported Antenna TX RX 1 2 3 Base (FP) and Repeater 4 1 Handset (PP) 2 VOLTAGE AND TEMPERATURE RANGES VOLTAGES FP PP Nominal Voltage 120V AC DC 3.7V Cut-Off Voltage (if applicable) - - - POWER SOURCE Type Manufacturer Base or Repeater PNLV226 (AC Adaptor) Panasonic Handset (PP) (charger) PNLV226 (AC Adaptor) Panasonic Data Connections PSTN (Base) Others (please specify) .... PCTP-14-F001/F002 FCC IDs: ACJ96NKX-PRX120 / ACJ96NKX-PRXA10 FCC Part 15D – Compliance Information pctp-14-f001_f002 (kx-prx120 fcc_part_15d-compliance_information) 8-Dec-2006 page 3 (4) rev.1.4 ANCILLARY EQUIPMENT Description AC Adaptor with Charger Type PNLC1049 (Charger) Manufacturer Panasonic HOST DEVICE Description Type Manufacturer ADDITIONAL INFORMATION PCTP-14-F001/F002 FCC IDs: ACJ96NKX-PRX120 / ACJ96NKX-PRXA10 FCC Part 15D – Compliance Information pctp-14-f001_f002 (kx-prx120 fcc_part_15d-compliance_information) 8-Dec-2006 page 4 (4) rev.1.4 MANUFACTURERS DECLARATIONS FCC part 15.323 (c)(5) No device or group of co-operating devices located within 1m of each other shall during any frame period occupy more than 6 MHz of aggregate bandwidth, or alternatively, more than one third of the time and spectrum windows defined by the system. Applicant Agrees Yes No FCC part 15.323 (c)(10) The applicant hereby declares that the system in this application does use the criteria of (c)(10) of this section. Applicant Agrees Yes No FCC part 15.323 (c)(11) The applicant hereby declares that system in this application does not use the criteria of (c)(11) of this section. Applicant Agrees Yes No FCC part 15.323 (c)(12) The provisions of (c)(10) or (c)(11) of this section shall not be used to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. Applicant Agrees Yes No FCC part 15.307 (b) The Applicant is a participating member of UTAM, Inc. and will provide an affidavit from UTAM, Inc. certifying this. Confirmed By Applicant Yes No ADDITIONAL REMARKS: > DECLARED BY: December 5, 2013 Richard Mullen Richard Mullen

EXTERNAL PHOTOGRAPHS KX-PRX120 Top View Bottom View

EXHIBIT B MARKINGS Base Unit: The base unit provides with the following marking, or equivalent. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. NOTE: Above markings are shown on bottom of the base unit.

INTERNAL PHOTOGRAPHS Internal View Main Board RF Portion RF Portion without cover

EXHIBIT E DESCRIPTION OF ELECTRICAL CIRCUITRY BASE UNIT: A) WHEN A BELL SIGNAL ENTERS FROM TEL LINE 1) The bell is inputted to pin 17 and 19 of IC7(DSP) and detected by inside circuit. 2) A portable phone receives a bell from the base station. When the portable phone is switched from the STANDBY to TALK, the base station receives a carrier modulated by data indicating the switch from STANDBY to TALK. The data demodulated at the base station is inputted to IC7, and passes through Q3 to make the circuit relay, then, release the muting and enables talk. B) WHEN A LINE LOOP IS MADE BY A PORTABLE PHONE 1) When the operator of the portable phone switches STANDBY to TALK, the TALK mode data enters the base station and is demodulated at the RF Unit of the base station, and is inputted of IC7. C) RECIEVER UNIT OPERATION 1) A signal is received by the antenna, and inputted to the pin 2 and 3 of IC7 through DA802 and DA801. 2) The received signals are mixed by IC7 to obtain digitized audio signal. 3) This audio signal is transmitted to the telephone line by IC7. D) TRANSMISSION UNIT OPERATION 1) An audio signal from the line passes through the interface transistor (Q5). 2) The audio signal is inputted to pin 21 of IC7. 2) This audio signal is coded by IC7. 3) The modulated signal from pin 78 and 79 of IC7 goes to a selected antenna through DA801 and DA802.

2013.09.30 KX-PRX120 Radio part description (1.9GHz part ) Category : Intentional Radiator Model name:KX-PRX120 (Baseset) Frequency band : 1920 to 1930 MHz Emission Designations : : F1E Frequency Shift Keying deviation : +/- 400kHz Bit Rate : 1.152 MBit/sec Type of Antenna KX-PRX120 (Baseset) :Antenna diversity ANT1 Wired-monopole-Antennna(Gain 0dBi) ANT2 Wired-monopole-Antennna(Gain 0dBi) Power Rating Baseset : AC 120V 60Hz (AC adaptor output DC 5.5V ) Frequency table : Carrier N 0 1 2 3 4 Transmitting Frequency: 1921.536 - 1928.448MHz Receive Frequency: 1921.536 - 1928.448MHz Channel Space : 1.728 MHz IF Frequency : 864kHz Other Clock Frequency : 10.368MHz (Reference clk for PLL) Frequency stability Baseset : +/- 10ppm Multiplex mode : Time Division Duplex The basic, repeating, frame structure is 10msec long. It is sub-divided into 24 slots, each 417usec long. The active transmission time (PA ON Time) is below. Base Dummy slot : 106usec Base link slot : 396 usec Handset link slot 394usec The first 12 slots from the “up-link”, when the Handsets transmit to the Baseset. The last 12 slots form the “down-link”, when the Baseset transmits to the Handsets. This system uses TDD (Time Division Duplex) to carry a two-way voice communication. This is always by using slot-pairs: 0 and 12, 2 and 14, 4 and 16, 6 and 18, 8 and 20, 10 and 22. CH Number : 60 (12 slots X 5 carrier) 3855.168 3851.712 3848.256 3844.800 CenterFrequencyLocal on TXLocal on RX 3856.896 3858.624 on TX/RX (MHz) (MHz) (MHz) 1928.448 1926.720 1924.992 1923.264 1921.536 3853.440 3846.528 3849.984 3843.072

FCC ID: ACJ96NKX-PRX120 MPE Calculation for FCC Uncontrolled Environment Formula from page 18 of OET Bulletin 65, Edition 97 -01 where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of i nterest relative to an isotropic radiator R = distance to the center of radiation of the ante nna Source Based Time Averaged Duty Cycle is 100% in ca lculation below Maximum peak output power at antenna input terminal : 19.30 (dBm) Maximum peak output power at antenna input terminal : 0.085 (W) Maximum antenna gain: 0.00 (dBi) Maximum antenna gain: 1.000 (numeric) Prediction distance: 20 (cm) Prediction frequency: 1925 (MHz) Time Averaged Duty Cycle 100 % MPE limit for uncontrolled exposure at prediction f requency: 10.00 (W/m^2) Power density at prediction frequency: 0.0169 (mW/cm^2) Power density at prediction frequency: 0.169 (W/m^2) Maximum allowable antenna gain: 17.71 (dBi) Margin of Compliance: 17.71 (dB) 2 4 R PG S π =

Report No. 247284-4 Template version: B Nemko Norway Nemko AS, Instituttveien 6, P.O. Box 96 Kjeller, 2007 Kjeller, Norway TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected] ENTERPRISE NUMBER NO974404532 nemko.com/no Test Report Product UPCS Base Station Name and address of the applicant Panasonic Corporation of North America Name and address of the manufacturer Panasonic System Networks Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku Fukuoka 812-8531, Japan Model KX-PRX120 Rating 120 V AC (Mains) Trademark Panasonic Serial number / Additional information DECT 6.0 Tested according to FCC Part 15, subpart D Isochronous UPCS Device, 1920 – 1930 MHz Industry Canada RSS 213, Issue 2 2 GHz License-exempt Personal Communications Service Devices (LE-PCS) Order number 247284 Tested in period 2013.11.12 to 2013.11.29 Issue date 2013.11.29 Name and address of the testing laboratory Instituttveien 6 Kjeller, Norway FCC No: 994405 IC OATS: 2040D-1 TEL: (+47) 22 96 03 30 FAX: (+47) 22 96 05 50 Prepared by [Frode Sveinsen] Approved by [G.Suhanthakumar] This report shall not be reproduced except in full without the written approval of Nemko. Opinions and interpretations expressed within this report are not part of the current accreditation. This report was originally distributed electronically with digital signatures. For more information contact Nemko. TEST REPORT FCC part 15D Report no.: 247284-4 FCC ID: ACJ96NKX-PRX120 Nemko Norway, Instituttveien 6, Kjeller, Norway Page 2 (44) CONTENTS 1 INFORMATION ................................................................................................................................. 3 1.1 Tested Item........................................................................................................................................ 3 1.2 Description of Tested Device ............................................................................................................. 3 1.3 Exposure Evaluation .......................................................................................................................... 3 1.4 Test Environment .............................................................................................................................. 4 1.5 Test Engineer(s) ................................................................................................................................ 4 1.6 Test Equipment ................................................................................................................................. 4 1.7 Other Comments ............................................................................................................................... 4 2 TEST REPORT SUMMARY .............................................................................................................. 5 2.1 General .............................................................................................................................................. 5 2.2 Test Summary ................................................................................................................................... 6 3 TEST RESULTS ................................................................................................................................ 7 3.1 Power Line Conducted Emissions ..................................................................................................... 7 3.2 Coordination with fixed microwave .................................................................................................. 11 3.3 Digital Modulation Techniques ........................................................................................................ 11 3.4 Labeling Requirements ................................................................................................................... 11 3.5 Antenna Requirement...................................................................................................................... 12 3.6 Channel Frequencies ...................................................................................................................... 12 3.7 Automatic Discontinuation of Transmission .................................................................................... 13 3.8 Peak Power Output ......................................................................................................................... 14 3.9 Emission Bandwidth B ..................................................................................................................... 17 3.10 Power Spectral Density ................................................................................................................... 20 3.11 In-Band Unwanted Emissions, Conducted ...................................................................................... 23 3.12 Out-of-band Emissions, Conducted................................................................................................. 25 3.13 Carrier Frequency Stability .............................................................................................................. 29 3.14 Frame Repetition Stability ............................................................................................................... 30 3.15 Frame Period and Jitter ................................................................................................................... 30 3.16 Monitoring Threshold, Least Interfered Channel ............................................................................. 32 3.17 Threshold Monitoring Bandwidth ..................................................................................................... 34 3.18 Reaction Time and Monitoring Interval ............................................................................................ 35 3.19 Time and Spectrum Window Access Procedure ............................................................................. 37 3.20 Acknowledgements …

Text truncated - open the document above for the full version.

FCC ID: ACJ96NKX-PRX120 Project no.: 247284 Page 1 of 1 PHOTOS OF TEST SET-UP – KX-PRX120 Power line Conducted Emissions Test