ACJ96NKX-TG57715.8GHZ FHSS Cordless Telephone System

Temporary Confidential This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service of your service provider. Please read these Operating Instructions before using the unit and save for future reference. For assistance, visit our website: http://www.panasonic.com for customers in the U.S.A. or Puerto Rico. Charge the battery for 7 hours before initial use. 5.8 GHz Expandable Digital Cordless Answering System Model No. KX-TG5771 Operating Instructions TG5771.book Page 1 Friday, October 28, 2005 5:32 PM Temporary Confidential 2 Important safety instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on this unit. 3. Unplug this unit from power outlets before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this unit near water, for example near a bathtub, wash bowl, kitchen sink, etc. 5. Place the unit securely on a stable surface. Serious damage and/or injury may result if the unit falls. 6. Do not cover slots and openings on the unit. They are provided for ventilation and protection against overheating. Never place the unit near radiators, or in a place where proper ventilation is not provided. 7. Use only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. 8. Do not place objects on the power cord. Install the unit where no one can step or trip on the cord. 9. Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. 10. Never push any objects through slots in this unit. This may result in the risk of fire or electric shock. Never spill any liquid on the unit. 11. To reduce the risk of electric shock, do not disassemble this unit. Take the unit to an authorized service center when service is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the unit is subsequently used. 12. Unplug this unit from power outlets and refer servicing to an authorized service center when the following conditions occur: A. When the power cord is damaged or frayed. B. If liquid has been spilled into the unit. C. If the unit has been exposed to rain or water. D. If the unit does not work normally by following the operating instructions. Adjust only controls covered by the operating instructions. Improper adjustment may require extensive work by an authorized service center. E. If the unit has been dropped or physically damaged. F. If the unit exhibits a distinct change in performance. 13. During thunderstorms, avoid using telephones except cordless types. There may be a remote risk of an electric shock from lightning. 14. Do not use this unit to report a gas leak, when in the vicinity of the leak. SAVE THESE INSTRUCTIONS CAUTION: Installation LNever install telephone wiring during a lightning storm. LNever install telephone jacks in wet locations unless the jack is specifically designed for wet locations. LNever touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. LUse caution when installing or modifying telephone lines. TG5771.book Page 2 Friday, October 28, 2005 5:32 PM Temporary Confidential 3 LDo not touch the plug with wet hands. LThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. Battery To reduce the risk of fire or injury to persons, read and follow these instructions. LUse only the battery(ies) specified. LDo not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal instructions. LDo not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. LExercise care when handling the battery(ies). Do not allow conductive materials such as rings, bracelets or keys to touch the battery(ies), otherwise a short circuit may cause the battery(ies) and/or the conductive material to overheat and cause burns. LCharge the battery(ies) provided, or identified for use with the product only, in accordance with the instructions and limitations specified in this manual. WARNING: LTo prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. LUnplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact the Panasonic Call Center at 1-800-211-PANA (1-800-211-7262). Medical LConsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The product operates in the frequency range of 5.76 GHz to 5.84 GHz, and the power output level can range from 0.25 to 0.5 watts.) Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF (radio frequency) energy. TG5771.book Page 3 Friday, October 28, 2005 5:32 PM Temporary Confidential 4 For best performance Base unit location/noise The base unit and other compatible Panasonic units use radio waves to communicate with each other. For maximum distance and noise-free operation, we recommend the following: LPlacing the product away from electrical appliances. LPlacing the base unit in a HIGH and CENTRAL location with no obstructions such as walls. LRaising the antennas vertically. LIf you use the handset near a microwave oven which is b…

Text truncated - open the document above for the full version.

EXHIBIT A STATEMENT OF SECURITY CODE This cordless telephone system has 1,099 billion digital security coding combinations that are provided by the following means: • Provided with 40 bits (1,099 billion) for security codes. • When shipped from the factory, the security code is decided by the manufacture. It is memorized in a memory IC. • Base and Handset knows each other’s security code information.

Panasonic Corporation of North America Three Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-392-6115 / Fax: 201-392-4564 [email protected] ROBERT WEGNER Group Manager Product Safety and Compliance Division Date: December 8, 2005 Control No: PCTP-05-F033 731 Confirm No: EA715538 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Original Certification Application for Frequency Hopping Spread Spectrum Transmitter Panasonic 5.8 GHz FHSS Cordless Telephone System, Model KX-TG5771 Family FCC Certification for FCC ID: ACJ96NKX-TG5771 To Whom It May Concern: Enclosed, find our original application for the subject transmitter. This product is in compliance with Part 15, Subpart C and Section 15.247. In accordance with provisions of Sections 0.457(d) and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contains Description of Circuitry, Schematic Diagram, Block Diagram and FHSS Operation of Description and Overview of Frequency Hopping Algorithm. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection. Also, in accordance with FCC Public Notice DA 04-1705, we request temporary confidentiality for exhibits, which contain External and Internal Photographs and the User Manual. The subject product is cordless telephone system, which has mobile base unit and portable handset. The transceiver portion of this product uses frequency hopping spread spectrum transmitter with FSK modulation with operation within 5725 ~ 5850 MHz. The base and handset have a maximum peak conducted RF output of 0.132 watts and 0.0646 watts. The base uses left and right permanently attached colliner antenna with nominal 3 dBi antenna gain and the handset uses permanently attached 5/8 λ pattern antenna with nominal 4 dBi antenna gain. The handset unit is classified as portable and SAR test reports was generated on representative handset model KX-TGA570. The SAR test report was generated with maximum transmit power (EIRP) at 0.110 watts with 20% duty cycle based on averaged and crest factor of 5. The worst-case handset SAR test results for head position was 0.327 W/Kg and body position was 0.420 W/Kg. The base unit is classified as mobile and the User Manual will contain the following type FCC RF Exposure Warning: “This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF exposure requirements the base unit must be installed and operated with its antenna located 20 cm or more between antenna and all person’s body (excluding extremities of hands, wrist and feet). The handset unit may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided. The base and handset units must not be co-located or operated in conjunction with any other antenna or transmitter.” The telephone interface portion of this product’s base will be FCC Part 68 TCB certified by CCL under identification number US: ACJW401BKX-TG5771. Sincerely yours, Robert Wegner Robert Wegner Group Manager

     EXTERNAL PHOTOGRAPHS KX-TG5771
     Rear View
     Bottom View

     EXTERNAL PHOTOGRAPHS KX-TGA570
     Battery Cover Open

EXHIBIT B MARKINGS Base Unit: The base unit provides with the following marking, or equivalent. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. Nameplate NOTE: Above markings are shown on bottom of the base unit. Portable Unit: FCC ID Label The marking will be shown on the battery compartment of the portable unit.

     INTERNAL PHOTOGRAPHS Internal View
     RF Cover Open
     P.C. Board (Another Side)

     INTERNAL PHOTOGRAPHS P.C. Board
     RF Cover Open
     P.C. Board (Another Side)

Test report No. : 26DE0101-HO-5 Page : 2 of 65 FCC ID : ACJ96NKX-TG5771 Issued date : November 25, 2005 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 CONTENTS PAGE SECTION 1 : Client information............................................................................................................................................ 3 SECTION 2 : Equipment under test (E.U.T.)........................................................................................................................ 3 2.1 Identification of E.U.T. ...................................................................................................................................... 3 2.2 Product Description ............................................................................................................................................ 4 SECTION 3 : Test standard information............................................................................................................................... 5 3.1 Requirements for compliance testing defined by the FCC ................................................................................. 5 3.2 Exposure limit .................................................................................................................................................... 6 SECTION 4 : Test result ......................................................................................................................................................... 7 4.1 Result of Max. SAR value .................................................................................................................................. 7 4.2 Test Location ...................................................................................................................................................... 7 SECTION 5 : Operation of E.U.T. during testing................................................................................................................. 7 5.1 Operating modes................................................................................................................................................. 7 5.2 Description of the head test setup ....................................................................................................................... 7 5.3 Method of measurement (Head SAR) ................................................................................................................ 9 5.4 Description of the Body-worn test setup and Method ........................................................................................ 9 SECTION 6 : Test surrounding.............................................................................................................................................. 10 6.1 Measurement uncertainty ................................................................................................................................... 10 SECTION 7 : Confirmation before testing ............................................................................................................................ 11 7.1 Output Power Measurement results .................................................................................................................... 11 SECTION 8 : Measurement results........................................................................................................................................ 12 8.1 Head 5800MHz SAR.......................................................................................................................................... 12 8.2 Body-worn 5800MHz SAR ................................................................................................................................ 13 APPENDIX 1 : Photographs of test setup............................................................................................................................ 14 APPENDIX 2 : Test instruments.......................................................................................................................................... 22 Equipment & calibration information ..................................................................................................................... 23 1. Equipment used................................................................................................................................................... 23 2. Dosimetry assessment setup................................................................................................................................ 24 3. Configuration and peripherals............................................................................................................................. 25 4. System components ............................................................................................................................................ 26 5. Test system specifications................................................................................................................................... 28 6. Simulated Tissues Composition of 5GHz ........................................................................................................... 29 7. Validation Measurement ..................................................................................................................................... 29 8. System validation data ........................................................................................................................................ 30 9. Validation uncertainty......................................................................................................................................... 31 10. Validation Measurement data ........................................................................................................................... 32 11. System Val…

Text truncated - open the document above for the full version.

Test report No. : 26DE0101-HO-2a Page : 2 of 48 Issued date : December 2, 2005 Revised date : December 7, 2005 FCC ID : ACJ96NKX-TG5771 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) CONTENTS PAGE SECTION 1: Client information ............................................................................................................ 3 SECTION 2: Equipment under test (E.U.T.)........................................................................................ 3 SECTION 3: Test specification, procedures & results......................................................................... 5 SECTION 4: Operation of E.U.T. during testing .................................................................................8 SECTION 5: Conducted Emission......................................................................................................... 9 SECTION 6: Spurious Emission.......................................................................................................... 10 SECTION 7: Bandwidth ....................................................................................................................... 11 SECTION 8: Maximum Peak Output Power ..................................................................................... 11 SECTION 9: Carrier Frequency Separation ...................................................................................... 11 SECTION 10: Number of Hopping Frequency .................................................................................. 11 SECTION 11: Dwell time...................................................................................................................... 11 APPENDIX 1: Photographs of test setup ............................................................................................ 12 Conducted Emission ............................................................................................................................12 Spurious Emission (Radiated) ............................................................................................................14 Worst Case Position (Horizontal: 0-deg/ Vertical: 90-deg, Left Antenna) .....................................15 APPENDIX 2:Test instruments ............................................................................................................ 16 APPENDIX 3: Data of EMI test............................................................................................................ 17 Conducted Emission ............................................................................................................................17 Carrier Frequency Separation ...........................................................................................................25 20dB Bandwidth ..................................................................................................................................27 Number of Hopping Frequency..........................................................................................................29 Dwell time .............................................................................................................................................31 Maximum Peak Output Power ...........................................................................................................33 Radiated Spurious Emission(30MHz-1GHz) ....................................................................................36 Radiated Spurious Emission(1GHz-40GHz) .....................................................................................39 Conducted Spurious Emission............................................................................................................42 Test report No. : 26DE0101-HO-2a Page : 3 of 48 Issued date : December 2, 2005 Revised date : December 7, 2005 FCC ID : ACJ96NKX-TG5771 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) SECTION 1: Client information Company Name Panasonic Communications Co., Ltd. Brand name Panasonic Address 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka, 812-8531 Japan Telephone Number +81-92-477-1405 Facsimile Number +81-92-477-1487 Contact Person Kunihiko Nawata SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment Cordless Telephone (Baseset) Model No. KX-TG5771 Serial No. 1 (for Radiated emissions and Conducted emissions) 2 (for Antenna terminal conducted emissions) Country of Manufacture Japan Rating AC120V 60Hz (AC Adaptor: POLV205) Condition of EUT Engineering prototype (Not for sale: This sample is equivalent to mass-produced items.) Operation Clock Main clock: 13.824 MHz Receipt Date of Sample November 11, 2005 2.2 Product Description Equipment Type Transceiver Frequency band Lower limit= 5725MHz, Upper limit= 5850MHz Bandwidth & Channel spacing Bandwidth: 79MHz Channel spacing: 891.87kHz Type of Modulation FHSS Antenna Type Colliner-Antenna Antenna Connector Type N/A Antenna Gain 3dBi (Typ.) Mode of Operation Duplex ITU code F1E Power Supply (RF Part) DC 4.0V Method of Frequency Generation Synthesizer Test report No. : 26DE0101-HO-2a Page : 4 of 48 Issued date : December 2, 2005 Revised date : December 7, 2005 FCC ID : ACJ96NKX-TG5771 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) FCC 15.31 (e) This EUT provides stable voltage (DC4.0V) constantly to RF Module regardless of input voltage. Therefore, this EUT complies with the requirement. FCC Part 15.203 Antenna requirement It is impossible for end users to replace the antenna, because the antenna is fixed outside of the EUT. Therefore, the equipment complies with the antenna requirement of Section 15.203. Test …

Text truncated - open the document above for the full version.

Test report No. : 26DE0101-HO-1a Page : 2 of 37 Issued date : December 2, 2005 Revised date : December 7, 2005 FCC ID : ACJ96NKX-TG5771 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) CONTENTS PAGE SECTION 1: Client information ............................................................................................................ 3 SECTION 2: Equipment under test (E.U.T.)........................................................................................ 3 SECTION 3: Test specification, procedures & results......................................................................... 5 SECTION 4: Operation of E.U.T. during testing .................................................................................8 SECTION 5: Spurious Emission............................................................................................................ 9 SECTION 6: Bandwidth ....................................................................................................................... 10 SECTION 7: Maximum Peak Output Power ..................................................................................... 10 SECTION 8: Carrier Frequency Separation ...................................................................................... 10 SECTION 9: Number of Hopping Frequency .................................................................................... 10 SECTION 10: Dwell time...................................................................................................................... 10 APPENDIX 1: Photographs of test setup ............................................................................................ 11 Spurious Emission (Radiated) ............................................................................................................11 Worst Case Position (Horizontal:Y-axis / Vertical: Z-axis).............................................................12 APPENDIX 2:Test instruments ............................................................................................................ 13 APPENDIX 3: Data of EMI test............................................................................................................ 14 Carrier Frequency Separation ...........................................................................................................14 20dB Bandwidth ..................................................................................................................................16 Number of Hopping Frequency..........................................................................................................18 Dwell time .............................................................................................................................................20 Maximum Peak Output Power ...........................................................................................................22 Radiated Spurious Emission(30MHz-1GHz) ....................................................................................25 Radiated Spurious Emission(1GHz-40GHz) .....................................................................................28 Conducted Spurious Emission............................................................................................................31 Test report No. : 26DE0101-HO-1a Page : 3 of 37 Issued date : December 2, 2005 Revised date : December 7, 2005 FCC ID : ACJ96NKX-TG5771 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) SECTION 1: Client information Company Name Panasonic Communications Co., Ltd. Brand name Panasonic Address 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka, 812-8531 Japan Telephone Number +81-92-477-1405 Facsimile Number +81-92-477-1487 Contact Person Kunihiko Nawata SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment Cordless Telephone (Handset) Model No. KX-TGA570 Serial No. 1 (for Radiated emissions) 2 (for Antenna terminal conducted emissions) Country of Manufacture Japan Model Name : HHR-P105 (Ni-MH Battery Pack) Rating : DC2.4V/830mAh Manufacture Panasonic Condition of EUT Engineering prototype (Not for sale: This sample is equivalent to mass-produced items.) Operation Clock Main clock: 13.824 MHz Receipt Date of Sample November 11, 2005 Category Identified Portable device 2.2 Product Description Equipment Type Transceiver Frequency band Lower limit= 5725MHz, Upper limit= 5850MHz Bandwidth & Channel spacing Bandwidth: 79MHz Channel spacing: 891.87kHz Type of Modulation FHSS Antenna Type 5/8 lambda Pattern-Antenna Antenna Connector Type N/A Antenna Gain 4dBi (Typ.) Mode of Operation Duplex ITU code F1E Power Supply (RF Part) DC 3.1V Method of Frequency Generation Synthesizer Test report No. : 26DE0101-HO-1a Page : 4 of 37 Issued date : December 2, 2005 Revised date : December 7, 2005 FCC ID : ACJ96NKX-TG5771 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) FCC 15.31 (e) This EUT provides stable voltage (DC3.1V) constantly to RF Module regardless of input voltage. Therefore, this EUT complies with the requirement. FCC Part 15.203 Antenna requirement It is impossible for end users to replace the antenna, because the antenna is mounted inside of the EUT. Therefore, the equipment complies with the antenna requirement of Section 15.203. Test report No. : 26DE0101-HO-1a Page : 5 of 37 Issued date : December 2, 2005 Revised date : December 7, 2005 FCC ID : ACJ96NKX-TG5771 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) SECTION 3: Test specification, procedures & results …

Text truncated - open the document above for the full version.

Test report No. : 26DE0101-HO-2a Page : 12 of 48 Issued date : December 2, 2005 Revised date : December 7, 2005 FCC ID : ACJ96NKX-TG5771 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) APPENDIX 1: Photographs of test setup Conducted Emission With Battery Charging Front Rear Test report No. : 26DE0101-HO-2a Page : 13 of 48 Issued date : December 2, 2005 Revised date : December 7, 2005 FCC ID : ACJ96NKX-TG5771 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) Conducted Emission Without Battery Charging Front Rear Test report No. : 26DE0101-HO-2a Page : 14 of 48 Issued date : December 2, 2005 Revised date : December 7, 2005 FCC ID : ACJ96NKX-TG5771 UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) Spurious Emission (Radiated) Front Rear Test report No. : 26DE0101-HO-2a Page : 15 of 48 Issued date : December 2, 2005 Revised date : December 7, 2005 FCC ID : ACJ96NKX-TG5771 UL Apex Co., Ltd. Head Office …

Text truncated - open the document above for the full version.