ACJ96NKX-TGA680DECT 6.0 Handset

Operating Instructions Model No. KX-TG6841 KX-TG6842 KX-TG6843 KX-TG6844 KX-TG6845 KX-TG6872 Digital Cordless Answering System Model shown is KX-TG6841. Before initial use, see “Getting Started” on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte “Guía Rápida Española”, página 61. For assistance, visit our Web site: http://www.panasonic.com/help for customers in the U.S.A. or Puerto Rico. Please register your product: http://www.panasonic.com/prodreg TG68xx(en)_1003_ver002.pdf 12012/10/03 17:08:29 Introduction Model composition .......................................3 Accessory information ..................................3 Important Information For your safety .............................................6 Important safety instructions ........................7 For best performance ...................................7 Other information .........................................8 Specifications ...............................................9 Getting Started Setting up ...................................................10 Note when setting up .................................11 Intelligent eco mode ...................................11 Controls ......................................................12 Belt clip .......................................................13 Display .......................................................13 Initial settings .............................................14 Making/Answering Calls Making calls ...............................................16 Answering calls ..........................................17 Useful features during a call .......................17 Power back-up operation ...........................19 Shared Phonebook Shared phonebook .....................................22 Speed Dial Speed dial ..................................................25 Programming Programmable settings ..............................26 Special programming .................................31 Registering a unit .......................................34 Caller ID Service Using Caller ID service ...............................36 Caller list ....................................................37 Answering System Answering system ......................................40 Turning the answering system on/ off ...............................................................40 Greeting message ......................................40 Listening to messages using the base unit .............................................................41 Listening to messages using the handset ......................................................42 Advanced new message alerting features ......................................................42 Remote operation .......................................44 Answering system settings .........................45 Voice Mail Service Voice mail service ......................................47 Intercom/Locator Intercom .....................................................49 Handset locator ..........................................49 Transferring calls, conference calls ............49 Useful Information Wall mounting ............................................51 Error messages ..........................................53 Troubleshooting .........................................54 FCC and other information .........................58 Guía Rápida Española Guía Rápida Española ...............................61 Appendix Customer services .....................................65 Warranty (For United States and Puerto Rico) ...........................................................66 Index Index...........................................................68 2 Table of Contents TG68xx(en)_1003_ver002.pdf 22012/10/03 17:08:29 Model composition nKX-TG6841 seriesnKX-TG6872 RModel shown is KX-TG6842. SeriesModel No. Base unitHandset Part No.Part No.Quantity KX-TG6841 series KX-TG6841 *1 KX-TG6841KX-TGA6801 KX-TG6842KX-TG6841KX-TGA6802 KX-TG6843KX-TG6841KX-TGA6803 KX-TG6844KX-TG6841KX-TGA6804 KX-TG6845KX-TG6841KX-TGA6805 KX-TG6872 *2 KX-TG6841KX-TGA6802 *1 Single handset models: Intercom calls can be made between handsets by purchasing and registering one or more optional handsets (page 5). *2 A key detector (KX-TGA20) is supplied in this model. The key detector is pre-registered to the unit. By attaching the key detector to easy-to-lose item beforehand, you can locate and find the mislaid item. Read the installation guide for the key detector. Accessory information Supplied accessories No. Supplied handset qty. 1 unit *1 2 units *2 3 units *3 4 units *4 5 units *5 Accessory item/ Order number Accessory quantity AAC adaptor/PNLV226Z11111 BTelephone line cord/ PQJA10075Z 11111 CDesk stand/Wall mounting adaptor *6 /PNKL1038Z1 11111 For assistance, please visit http://www.panasonic.com/help 3 Introduction TG68xx(en)_1003_ver002.pdf 32012/10/03 17:08:29 No. Supplied handset qty. 1 unit *1 2 units *2 3 units *3 4 units *4 5 units *5 Accessory item/ Order number Accessory quantity DRechargeable batteries/ HHR-4DPA 246810 E Handset cover *7 / PNYNTGA680BR 12345 FBelt clip/PNKE1268Z112345 GCharger/PNLC1040ZB–1234 *1 KX-TG6841 *2 KX-TG6842/KX-TG6872 *3 KX-TG6843 *4 KX-TG6844 *5 KX-TG6845 *6 The desk stand/wall mounting adaptor comes attached to the base unit. *7 The handset cover comes attached to the handset. n For KX-TG6872 No.Accessory item/Order numberQuantity HKey detector/KX-TGA201 ICR coin cell lithium battery/CR20321 ABCDE FGHI Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 65). Accessory itemOrder number Rechargeable batteries HHR-4DPA *1 RTo order, please call 1-800-332-5368 or visit http://www.panasonic.com/batterystore Battery type: – Nickel metal hydride (Ni-MH) – 2 x AAA (R03) size for each handset HeadsetKX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430 4 For assistance, please visit http://www.pan…

Text truncated - open the document above for the full version.

EXHIBIT A STATEMENT OF SECURITY CODE This cordless telephone system has more than 1,000 billion combinations that are provided by the following means:  Provided with 128 bits for security codes.  When shipped from the factory, the security code is decided by the manufacture. It is memorized in a memory IC.  Base and Handset knows each other’s security code information.

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] Richard Mullen Group Manager Product Safety and Compliance Division Power of Attorney December 21, 2012 PCTP-12-F004 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Panasonic Corporation of North America hereby authorizes Nemko AS to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product, which are in compliance with FCC Part 15D. Any and all acts carried out by Nemko AS on our behalf shall have the same effects as acts of our own for a period of one year from the date of this letter. Type Filing: Original Application for DECT Cordless Telephone Handset, Model KX-TGA680 1 Product Classification: Part 15 Unlicensed PCS Portable Tx Held to Ear (PUE) FCC ID Handset Unit ACJ96NKX-TGA680 FCC Rule Part: FCC Part 15, Subpart D Frequency Range: 1921.536 ~ 1928.448 MHz RF Output Power: 0.089 Watts Responsible Panasonic Corporation of North America Applicant & Grantee: One Panasonic Way, Secaucus, NJ 07094 Responsible Manufacturer: Panasonic System Networks Co., Ltd. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division 1 DECT Handset under FCC ID: ACJ96NKX-TGA680 may be marketed with DECT Bases, which will be Part 15D certified under FCC IDs: ACJ96NKX-TG6841 and ACJ96NKX-TG7871. Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] Richard Mullen Group Manager Product Safety and Compliance Division Request for Confidentiality December 21, 2012 PCTP-12-F004 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Type Filing: Original Application for DECT Cordless Telephone Handset, Model KX-TGA680 Product Classification: Part 15 Unlicensed PCS Portable Tx Held to Ear (PUE) FCC ID Handset Unit ACJ96NKX-TGA680 FCC Rule Part: FCC Part 15, Subpart D In accordance with provisions of Sections 0.457 and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain: (1) Antenna Construction; (2) Description of Electrical Circuitry; (3) Schematic Diagrams of Handset Unit and RF Unit; and (4) Block Diagram. The transmitter is not user adjustable and does not have a Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection. In accordance with FCC Public DA 04-1705, we request forty-five day short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain: (1) External Photographs of Handset Unit and RF Unit; (2) Internal Photographs of Handset Unit and RF Unit; (3) Test Setup Photographs; and (4) User Manual. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division

PCTP-12-F004 / DECT Handset under FCC ID: ACJ96NKX-TGA680 FCC Part 15D – Compliance Information pctp-12-f004 (fcc part 15d compliance information for dect handset under acj96nkx-tga680).doc 8-Dec-2006 page 1 (4) rev.1.4 EUT AND PRODUCT INFORMATION Type of Equipment UPCS (DECT 6.0) Applicant Name Panasonic Corporation of North America Responsible Mfr Name Panasonic System Networks Co., Ltd. Communication system Business Unit Address 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Contact Keisuke Hirai FP PP EUT Type/System FCC ID ACJ96NKX-TGA680 (IC:216A-KXTGA680) Model name KX-TGA680 HW Version PNLB2159xx SW Version SW401 Max antenna Gain (dBi) 0 dBi Can the EUT be Initiating Device YES YES Does the EUT transmit signaling channels YES YES Max number of slots in use simultaneously 1 slot Test standard: FCC part 15D Other: Industry Canada RSS-213, Issue 2 Frequency Band 1921.536 – 1928.448 MHz # of RF Channels 5 Frame Period 10 ms Max. Burst length 417us / duplex channel Min. Burst Length 106us / signaling channel # of Logical Channels 60 (12 duplex channels per RF carrier) Operating Mode Simplex Duplex PCTP-12-F004 / DECT Handset under FCC ID: ACJ96NKX-TGA680 FCC Part 15D – Compliance Information pctp-12-f004 (fcc part 15d compliance information for dect handset under acj96nkx-tga680).doc 8-Dec-2006 page 2 (4) rev.1.4 ANTENNAS Antenna Type Internal External 1 Wired Antenna 2 Pattern Antenna 3 4 Base (FP) Does RX and TX use the same antenna(s)? Yes No Antenna Type Internal External 1 Pattern Antenna 2 Handset (PP) Does RX and TX use the same antenna(s)? Yes No ANTENNA DIVERSITY Diversity Supported Antenna TX RX 1 2 3 Base (FP) and Repeater 4 1 Handset (PP) 2 VOLTAGE AND TEMPERATURE RANGES VOLTAGES FP PP Nominal Voltage 120V AC - Cut-Off Voltage (if applicable) - - - POWER SOURCE Type Manufacturer Base or Repeater AC Adaptor for Base: Types PNLV226(FW) or PNLV226(UC) with switching frequency at 54 kHz or 38 kHz. Panasonic PCTP-12-F004 / DECT Handset under FCC ID: ACJ96NKX-TGA680 FCC Part 15D – Compliance Information pctp-12-f004 (fcc part 15d compliance information for dect handset under acj96nkx-tga680).doc 8-Dec-2006 page 3 (4) rev.1.4 Handset (PP) (Charger) AC Adaptor Models PNLV233(YJ) or PNLV233(UC) with switching frequency at 33 kHz or 38 kHz for Charger Cradle Model PNLC1040 Panasonic Data Connections PSTN (Base) Others (please specify) .... ANCILLARY EQUIPMENT Description AC Adaptor and Charger Type PNLV226 (AC Adaptor) and PNLC1040(AC Aaptor Charger PNLV233) Manufacturer Panasonic HOST DEVICE Description Type Manufacturer ADDITIONAL INFORMATION PCTP-12-F004 / DECT Handset under FCC ID: ACJ96NKX-TGA680 FCC Part 15D – Compliance Information pctp-12-f004 (fcc part 15d compliance information for dect handset under acj96nkx-tga680).doc 8-Dec-2006 page 4 (4) rev.1.4 MANUFACTURERS DECLARATIONS FCC part 15.323 (c)(5) No device or group of co-operating devices located within 1m of each other shall during any frame period occupy more than 6 MHz of aggregate bandwidth, or alternatively, more than one third of the time and spectrum windows defined by the system. Applicant Agrees Yes No FCC part 15.323 (c)(10) The applicant hereby declares that the system in this application does use the criteria of (c)(10) of this section. Applicant Agrees Yes No FCC part 15.323 (c)(11) The applicant hereby declares that system in this application does not use the criteria of (c)(11) of this section. Applicant Agrees Yes No FCC part 15.323 (c)(12) The provisions of (c)(10) or (c)(11) of this section shall not be used to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. Applicant Agrees Yes No FCC part 15.307 (b) The Applicant is a participating member of UTAM, Inc. and will provide an affidavit from UTAM, Inc. certifying this. Confirmed By Applicant Yes No ADDITIONAL REMARKS: > DECLARED BY: December 21, 2012 Richard Mullen Richard Mullen

EXTERNAL PHOTOGRAPHS KX-TGA680 Bottom View

EXHIBIT B MARKINGS Portable Unit: FCC ID Label: The m arking will be shown on the battery compartment of the portable unit. NOTE: The portable unit is sold without the battery installed. Nameplate: The nam eplate is located on the battery compartment of the portable unit.

INTERNAL PHOTOGRAPHS Internal View RF Portion PC Board The other side

INTERNAL PHOTOGRAPHS Internal View

The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. SAR_Report_Nemko_60320_6120404_FCC_CalData_TGA680 Appendix for the Report Dosimetric Assessment of the Portable Device Panasonic KX-TGA680 (FCC ID: ACJ96NKX-TGA680) According to the FCC Requirements Calibration Data December 19, 2012 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Panasonic System Networks Co., Ltd. 1 - 62, 4 - chome Minoshima, Hakata, Fukuoka 812-8531 Japan SAR_Report_FCC_DECT_1900_1.2.doc/25.11.2011/AR The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. Cal_D1900V2_SN5d051_Sep2011 Page 1 of 8 Calibration Certificate Certificate No: Cal_D1900V2_SN5d051_Sep2011 Object: D1900V2 SN: 5d051 Date of Calibration: September 30, 2011 Next Calibration: September 2013 Object Condition: In Tolerance Calibration Equipment used: Test Equipment Serial Number Last calibration Calibrated by Next calibration Powermeter E4416A GB41050414 Dec 10 Agilent Techn. (ISO/IEC 17025, 1-1784162174-1) Dec 12 Power Sensor E9301H US40010212 Dec 10 Agilent Techn. (ISO/IEC 17025, 1-1784041195-1) Dec 12 Powermeter E4417A GB41050441 Dec 10 Agilent Techn. (ISO/IEC 17025, 1-1674038198-1) Dec 12 Power Sensor E9301A MY41495584 Dec 10 Agilent Techn. (ISO/IEC 17025, 1-1784041307-1) Dec 12 Network Analyzer E5071C MY46103220 Aug 11 Rohde& Schwarz (14967-DKD-00201- 2009-08) Aug 12 Reference Probe ET3DV6 SN 1669 Feb 11 SPEAG, No ET3- 1669_Feb09 Feb 12 DAE3 SN 335 Feb 11 SPEAG, No DAE3- 335_Feb09 Feb 12 Cal_D1900V2_SN5d051_Sep2011 Page 2 of 8 Calibration is performed according the following standards: IEEE 1528-2003 "IEEE Recommended Practice for Determining the Peak Spatial - Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communication Devices: Measurement Technique", December 2003 EN 62209-1 "Procedure to measure the Specific Absorption Rate (SAR) for hand - held devices used in close proximity to the ear (frequency range of 300 MHz to 3GHz)", March 2007 Federal Communications Commission Office of Engineering & Technologies (FCCOET) "Evaluating Compliance wit FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01-01) to Bulletin 65 Additional Documentation: DASY 4 System Handbook prepared by: reviewed by: Alexander Rahn André van den Bosch test engineer quality assurance engineer 08/ABo Cal_D1900V2_SN5d051_Sep2011 Page 3 of 8 Measurement Conditions DASY Version: Dasy 4; V4.7 Phantom: SAM Phantom 1340 Distance Dipole Center – TSL: 10mm With spacer Zoom Scan res. dx, dy, dz = 5mm Frequency: 1900 MHz ± 1MHz Head TSL Parameters Temperature Permittivity Conductivity Nominal Head TSL Parameters 22.0 40.0 1.40 Measured Head TSL Parameters 22.8 39.4 ± 6% 1.43 S/m ± 6% SAR Result with Head TSL Averaged over 1g SAR measured 250mW input power9.53 mW/g SAR normalized normalized to 1W 38.12 mW/g SAR for nominal Head TSL parameters normalized to 1W 37.51 mW/g ± 16.5 % (k=2) Averaged over 10g SAR measured 250mW input power4.93 mW/g SAR normalized normalized to 1W 19.72 mW/g SAR for nominal Head TSL parameters normalized to 1W 19.52 mW/g ± 16.5 % (k=2) Cal_D1900V2_SN5d051_Sep2011 Page 4 of 8 Body TSL Parameters Temperature Permittivity Conductivity Nominal Body TSL Parameters 22.0 53.30 1.52 Measured Body TSL Parameters 23.3 52.10 ± 6% 1.54 S/m ± 6% SAR Result with Body TSL Averaged over 1g SAR measured 250mW input power 9.66 mW/g SAR normalized normalized to 1W 38.64 mW/g SAR for nominal Body TSL parameters normalized to 1W 38.14 mW/g ± 16.5 % (k=2) Averaged over 10g SAR measured 250mW input power 5.10 mW/ g SAR normalized normalized to 1W 20.40 mW/g SAR for nominal Body TSL parameters normalized to 1W 20.23 mW/g ± 16.5 % (k=2) General Antenna Parmeters Antenna Parameters with Head TSL Impedance, transformed to feed point 48.4 jΩ - 0.7 jΩ Return Loss -35.2 dB Antenna Parameter with Body TSL Impedance, transformed to feed point 52.8 jΩ - 1.8 jΩ Return Loss -29.9 dB After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semigrid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short-circuited for DC signals. Additional EUT Data Manufactured by: SPEAG Manufactured on: January 15, 1998 Cal_D1900V2_SN5d051_Sep2011 Page 5 of 8 SAR Result with Head TSL Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: 300911_y_1669.da4 DUT: Dipole 1900 MHz SN: 5d051; Type: D1900V2; Serial: D1900V2 - SN5d051 Program Name: System Performance Check at 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.43 mho/m; ε r = 39.4; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(5.12, 5.12, 5.12); Calibrated: 21.02.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 22.02.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 10.4 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 90.3 V/m; Power Drift = -0.025 dB Peak SAR (extrapolated) = 17.0 W/kg SAR(1 g) = 9.53 mW/g; SAR(10 g) = 4.93 mW/g Maximum value of …

Text truncated - open the document above for the full version.

The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. SAR_Report_Nemko_60320_6120404_FCC_DECT_Plots_TGA680 Page 1 of 10 Appendix for the Report Dosimetric Assessment of the Portable Device KX-TGA680 (FCC ID: ACJ96NKX-TGA680) According to the FCC Requirements SAR Distribution Plots December 19, 2012 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Panasonic System Networks Co., Ltd. 1 - 62, 4 - chome Minoshima, Hakata, Fukuoka 812-8531 Japan The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. SAR_Report_Nemko_60320_6120404_FCC_DECT_Plots_TGA680 Page 2 of 10 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Table of Contents 1 SAR DISTRIBUTION PLOTS, HEAD MEASUREMENT ........................................................................... 3 2 SAR DISTRIBUTION PLOTS, BODY MEASUREMENT ........................................................................... 7 3 SAR Z-AXIS SCANS (VALIDATION) ........................................................................................................... 9 4 SAR Z-AXIS SCANS (MEASUREMENTS) ................................................................................................ 10 SAR_Report_Nemko_60320_6120404_FCC_DECT_Plots_TGA680 Page 3 of 10 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo 1 SAR Distribution Plots, Head Measurement Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: 680yplm_1.da4 DUT: Panasonic; Type: KX-TGA680; Program Name: DECT Communication System: DECT US; Frequency: 1888.7 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.45 mho/m; ε r = 38.5; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.41, 8.41, 8.41); Calibrated: 24.09.2012 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 20.09.2012 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Cheek Left/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.002 mW/g Cheek Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0.927 V/m; Power Drift = -0.128 dB Peak SAR (extrapolated) = 0.008 W/kg SAR(1 g) = 0.0023 mW/g; SAR(10 g) = 0.0007 mW/g Maximum value of SAR (measured) = 0.003 mW/g Fig. 1: SAR distribution for DECT US, channel 2, cheek position, left side of head (December 11, 2012; Ambient Temperature: 21.8°C; Liquid Temperature: 21.6°C). SAR_Report_Nemko_60320_6120404_FCC_DECT_Plots_TGA680 Page 4 of 10 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: 680yplm_2.da4 DUT: Panasonic; Type: KX-TGA680; Program Name: DECT Communication System: DECT US; Frequency: 1888.7 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.45 mho/m; ε r = 38.5; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.41, 8.41, 8.41); Calibrated: 24.09.2012 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 20.09.2012 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Tilted Left/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.001 mW/g Tilted Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0.440 V/m; Power Drift = -0.156 dB Peak SAR (extrapolated) = 0.003 W/kg SAR(1 g) = 0.0007 mW/g; SAR(10 g) = 0.0001 mW/g Fig. 2: SAR distribution for DECT US, channel 2, tilted position, left side of head (December 11, 2012; Ambient Temperature: 21.8°C; Liquid Temperature: 21.6°C). SAR_Report_Nemko_60320_6120404_FCC_DECT_Plots_TGA680 Page 5 of 10 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: 680yprm_1.da4 DUT: Panasonic; Type: KX-TGA680; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.45 mho/m; ε r = 38.5; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.41, 8.41, 8.41); Calibrated: 24.09.2012 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 20.09.2012 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Cheek Right/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.002 mW/g Cheek Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.02 V/m; Power Drift = 0.112 dB Peak SAR (extrapolated) = 0.008 W/kg SAR(1 g) = 0.0021 mW/g; SAR(10 g) = 0.0009 mW/g Maximum value of SAR (measured) = 0.003 mW/g Fig. 3: SAR distribution for DECT US, channel 2, cheek position, right side of head (December 11, 2012; Ambient Temperature: 21.8°C; Liquid Temperature: 21.6°C). SAR_Report_Nemko_60320_6120404_FCC_DECT_Plots_TGA680 Page 6 of 10 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: 680yprm_2.da4 DUT: Panasonic; Type: KX-TGA680; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.45 mho/m; ε r = 38.5; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.41, 8.41, 8.41); Calibrated: 24.09.2012 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn63…

Text truncated - open the document above for the full version.

The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. SAR_Report_Nemko_60320_6120404_FCC_DECT_KX-TGA680_Confidential Page 1 of 31 Report Dosimetric Assessment of the Portable Device KX-TGA680 (FCC ID: ACJ96NKX-TGA680) According to the FCC Requirements December 19, 2012 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Panasonic System Networks Co., Ltd. 1 - 62, 4 - chome Minoshima, Hakata, Fukuoka 812-8531 Japan The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. SAR_Report_Nemko_60320_6120404_FCC_DECT_KX-TGA680_Confidential Page 2 of 31 Dasy_Report_FCC_DECT_1900_1.3.doc/10.09.2010/ABo Executive Summary The KX-TGA680 is a new cordless phone (Portable Device) from Panasonic operating in the 1920 MHz frequency range (US DECT Standard). The device has an integrated antenna. The objective of the measurements done by IMST was the dosimetric assessment of one device in a worst case setup in head configuration. The handset was set to use one specific frequency and maximum output power during the measurement. The examinations have been carried out with the dosimetric assessment system „DASY4“. The measurements were conducted according to the Supplement C to OET Bulletin 65 of the Federal Communications Commission (FCC) Guidelines [OET 65] for evaluating compliance of mobile and portable devices with FCC limits for human exposure (general population) to radiofrequency emissions. All measurements have been performed in accordance to the recommendations given by SPEAG. Since the device provides no headset connector, SAR assessment was conducted in head configuration only. Compliance Statement The Panasonic KX-TGA680 cordless telephone (FCC ID: ACJ96NKX-TGA680) is in compliance with the Federal Communications Commission (FCC) Guidelines [OET 65] for uncontrolled exposure. Maximum SAR 1g = 0.002 W/kg (Cheek Left, Channel 2) prepared by: ........................................ reviewed by: ..................................... Alexander Rahn André van den Bosch test engineer quality assurance engineer SAR_Report_Nemko_60320_6120404_FCC_DECT_KX-TGA680_Confidential Page 3 of 31 Dasy_Report_FCC_DECT_1900_1.3.doc/10.09.2010/ABo Table of Contents 1 SUBJECT OF INVESTIGATION .................................................................................................................... 4 2 THE IEEE STANDARD C95.1-1999 AND THE FCC EXPOSURE CRITERIA ....................................... 4 2.1 DISTINCTION BETWEEN EXPOSED POPULATION, DURATION OF EXPOSURE AND FREQUENCIES ........... 4 2.2 DISTINCTION BETWEEN MAXIMUM PERMISSIBLE EXPOSURE AND SAR LIMITS ....................................... 5 2.3 SAR LIMIT .................................................................................................................................................. 5 3 THE FCC MEASUREMENT PROCEDURE ................................................................................................. 6 3.1 GENERAL REQUIREMENTS......................................................................................................................... 6 3.2 DEVICE OPERATING NEXT TO A PERSON’S EAR ....................................................................................... 6 4 BODY-WORN CONFIGURATIONS .............................................................................................................. 9 4.1 POC (PTT) P…

Text truncated - open the document above for the full version.