ACJ96NKX-TGBA81DECT Cordless Telephone - Handset

Operating Instructions Compact Cordless Telephone Model No. KX-TGB810 KX-TGB812 Model shown is KX-TGB810. Before initial use, see “Getting Started” on page 11. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. ® Consulte “Guía Rápida Española”, página 37. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A. Please register your product: http://shop.panasonic.com/support Table of Contents 2 Introduction Model composition......................... 3 Accessory information ................... 3 Graphical symbols for use on equipment and their descriptions... 5 Important Information For your safety............................... 6 Important safety instructions.......... 8 For best performance .................... 8 Other information ........................... 9   ................................ 10 Getting Started Setting up ...................................... 11 Note when setting up ..................... 12 Navigating the menus .................... 13 Date and time ................................ 13 Other settings ................................ 13 Controls ......................................... 14 Display icons ................................. 15 Menu map...................................... 16 Making/Answering Calls Making calls ................................... 17 Answering calls.............................. 17 Useful features during a call .......... 17 Intercom, transferring calls and conference calls ............................ 18 Redial ............................................ 19 Handset locator ............................. 19 Phonebook Phonebook .................................... 20 Speed dial...................................... 21 Caller ID service Using Caller ID service .................. 23 Programming Call block ....................................... 26 Flash time ...................................... 27 Dial mode ...................................... 27 Auto clock ...................................... 27 Clock and alarm............................. 27 Personal settings ........................... 28 Useful Information Voicemail ....................................... 31 Wall mounting ................................ 31 Troubleshooting ............................. 31 FCC and other information ............ 34 Guía Rápida Española Guía Rápida Española .................. 37 Appendix Customer services ......................... 42 Limited Warranty (ONLY FOR U.S.A.) ....................... 43 Index Index .............................................. 45 3 For assistance, please visit http://shop.panasonic.com/support Model composition SeriesModel No. Base unitHandset Part No.Part No.Quantity KX-TGB810 series KX-TGB810KX-TGB810KX-TGBA811 KX-TGB812KX-TGB810KX-TGBA812 Accessory information Supplied accessories No.Accessory item/Part number Quantity KX-TGB810KX-TGB812 AC adaptor/PNWYBB810S0012 Telephone line cord/PNJA1186Z11 Rechargeable batteries *1 24 Handset cover *2 /PNWYAB810S0112 Charger/PNWYAB810S02-1 *1 See page 4 for replacement battery information. *2 The handset cover comes attached to the handset. Introduction 1 2 3 4 234 5 51 For assistance, please visit http://shop.panasonic.com/support 4 Introduction Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 42). Accessory item   Rechargeable batteries PNWYAB810S06 To order, please visit http://shop.panasonic.com/support Battery type: – Nickel metal hydride (Ni-MH) – 2 x AAA (R03) size for each handset Other information                The illustrations in these instructions may vary slightly from the actual product. 5 For assistance, please visit http://shop.panasonic.com/support Graphical symbols for use on equipment and their descriptions SymbolExplanationSymbolExplanation Alternating current (A.C.) Class II equipment (equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) Direct current (D.C.)“ON” (power) Protective earth“OFF” (power) Protective bonding earthStand-by (power) Caution: risk caused by visible radiation “ON”/“OFF” (power; push-push) For indoor use onlyCaution, risk of electric shock Introduction 6 For assistance, please visit http://shop.panasonic.com/support Important Information Never touch the plug with wet hands. Danger of electric shock exists. Installation        electrical shock, do not expose the product to rain or any type of moisture. Do not place or use this product near automatically controlled devices such as automatic doors      emitted from this product may cause such devices to malfunction resulting in an accident. Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed  !   Operating safeguards Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. Do not disassemble the product. Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause "      plug becomes wet, immediately      # and do not use. Do not place the corded or cordless handset on the base unit when battery cover is removed. Medical Consult the manufacturer of any For your safety     !   of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection Use only the power source marked on the product. Do not overload power outlets and extension cords. This can result in        Completely insert the AC adaptor/ power plug into the power outlet. Failure to do so may cause electric shock and/or excess…

Text truncated - open the document above for the full version.

Two Riverfront Plaza | Newark, NJ 07102-5490 Ben Botros, Project Manager Safety , Compliance and Quality Assurance Authorization Letter June 18, 2020 PCEC-20-SGW01D Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Panasonic Corporation of North America hereby authorizes Intertek Testing Services (Mr. Terry Chan / Tim Lee/ Herbert Wong / Kenneth Wong) to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product. Any and all acts carried out by Intertek Testing Services on our behalf shall have the same effects as acts of our own for a period of six months from the date of this letter. Type Filing: Original Application DECT Telephone Handset FCC ID: ACJ96NKX-TGBA81 Model Numbers: KX-TGBA81 FCC Classification: Isochronous UPCS Portable Tx Held to Ear (PUE) FCC Rule Part: FCC Part 15, Subpart D Frequency Range: 1921.536 ~ 1928.448 RF Exposure: Portable / SAR (zero spacing between antenna and head/body is acceptable) FCC Rule Part: FCC Part 15, Subpart B FCC Classification: Class B Digital Device (JAB) Responsible Panasonic Corporation of North America Applicant & Grantee: Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Sincerely yours, Ben Botros Project Manager Panasonic Corporation of North America Safety, Compliance and Quality Assurance

Two Riverfront Plaza | Newark, NJ 07102-5490 Ben Botros, Project Manager Safety , Compliance and Quality Assurance Request for Confidentiality June 18, 2020 PCEC-20-SGW01C Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Panasonic Corporation of No rth America hereby authorizes Intertek Testing Services (Mr. Terry Chan / Tim Lee/ Herbert Wong / Kenneth Wong) to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product. Type Filing: Original Application DECT Telephone Handset FCC ID: ACJ96NKX-TGBA81 Model Numbers: KX-TGBA81 Request For Permanent Confidentiality In accordance with provisions of Sections §§0.457(d) and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain: (1) Description of Electrical Circuitry; (2) Schematic Diagrams and (3) Block Diagram. The transmitter is not user adjustable and do es not have a Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection. Request For Short-Term Confidentiality In accordance with FCC Public DA 04-1705, we request ninety day short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain: (1) External Photographs (2) Internal Photographs (3) Test Setup Photographs; and (4) User Manual. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Sincerely yours, Ben Botros Project Manager Panasonic Corporation of North America Safety, Compliance and Quality Assurance

May 25, 2020 To whom it may concern, Declarations FCC ID: ACJ96NKX-TGBA81 I, the undersigned, hereby declare that 1. The device does not use the provisions of 47CFR 15.323 (c) (6), random waiting mechanism is not used in this system. 2. The provisions of 47CFR 15.323 (c) (10) and 47CFR 15.323 (c) (11) are not used to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. 3. Only the handset will act as the initiating device, which will initiate the establishment of the duplex connection. 4. The device complies with the provisions of 47CFR 15.319(f). The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude transmission of control and signaling information or use of repetitive codes used by certain digital technologies to complete frame or burst intervals. The following table explains the reaction of device in case of either absence of information to transmit or operational failure after a connection of its companion device is established. Circumstances Reaction of Handset 1 Switch-off companion device NA 2 On hook by companion device NA 3 Switch-off device NA 4 On hook on device side C 5 Remove power from device C 6 Remove power from companion device A A – Connection is terminated and, transmission ceases. B – Connection is terminated but device transmits control or signaling information. C – Connection is terminated but companion device transmits control or signaling information. NA – Not applicable represents the device does not contain a hook switch or a power off switch. 5. M L of base unit and Handset declared by manufacturer are 30dBm. If you have questions or need further information, please contact the undersigned. Regards,

INTERTEK TESTING SERVICES External Photos FCC ID: ACJ96NKX-TGBA81 INTERTEK TESTING SERVICES External Photos FCC ID: ACJ96NKX-TGBA81 INTERTEK TESTING SERVICES The Worst Case Configuration Photographs

INTERTEK TESTING SERVICES External Photos FCC ID: ACJ96NKX-TGBA81 INTERTEK TESTING SERVICES External Photos FCC ID: ACJ96NKX-TGBA81

INTERTEK TESTING SERVICES Internal photos FCC ID: ACJ96NKX-TGBA81 INTERTEK TESTING SERVICES Internal photos FCC ID: ACJ96NKX-TGBA81 INTERTEK TESTING SERVICES Internal photos FCC ID: ACJ96NKX-TGBA81 INTERTEK TESTING SERVICES Internal photos FCC ID: ACJ96NKX-TGBA81 INTERTEK TESTING SERVICES Internal photos FCC ID: ACJ96NKX-TGBA81

TEST REPORT 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 35 SPECIFIC ABSORPTION RATE (SAR) EVALUATION REPORT For DECT6.0 Cordless Telephone - Handset Unit Model Number: KX-TGBA81, KX-TGB810, KX-TGB812 FCC ID: ACJ96NKX-TGBA81 Prepared for Panasonic Corporation of North America 2 Riverfront Plaza, 9/F., Newark, NJ 07102, USA PREPARED AND CHECKED BY: APPROVED BY: Signed On File Siu Yiu Nam, Edwin Senior Lead Engineer Date: January 2, 2020 Chan Chi Hung, Terry Manager Date: January 2, 2020 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 19110591HKG-001.doc Page 2 of 35 TABLE OF CONTENTS 1 Test Result Summary .............................................................................................................................. 3 2 General Information ............................................................................................................................... 4 3 SAR Measurement System Description ................................................................................................. 7 4 Tissue Verificaiton ................................................................................................................................ 15 5 SAR Measurement System Verification ............................................................................................... 18 6 SAR Evaluation ...................................................................................................................................... 20 7 Test Equipment List .............................................................................................................................. 30 8 Measurement Uncertainty ................................................................................................................... 31 9 E-Field Probe and Dipole Antenna Calibration .................................................................................... 31 APPENDIX A – System Check Data ........................................................................................................... 32 APPENDIX B – SAR Evaluation Data ......................................................................................................... 33 APPENDIX C – E-Field Probe and Dipole Antenna Calibration ................................................................. 34 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 19110591HKG-001.doc Page 3 of 35 1. TEST RESULT SUMMARY The maximum spatial peak SAR value for the sample device averaged over 1g was found to be: Band Operating Mode TX Frequency (MHz) Highest Reported SAR 1 g Head 1.9GHz DECT Voice 1921.536 – 1928.448 0.0171W/kg This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment / general population exposure limits specified in ANSI/IEEE C95.1. Applicant: Panasonic Corporation of North America Applicant Address: 2 Riverfront Plaza, 9/F., Newark, NJ 07102, USA Model: Panasonic Corporation of North America Brand Name: N/A Serial Number: N/A FCC ID: ACJ96NKX-TGBA81 Test Device: Production Unit Exposure Category: General Population/Uncontrolled Exposure Date of Test: December 23, 2019 Place of Testing: Intertek Testing Services Hong Kong Unit 3, G/F, World-Wide Industrial Centre, 43-47 Shan Mei Street, Fo Tan, Sha Tin. Environmental Conditions: Temperature: +18 to 25°C Humidity 25 to 75% Test Specification: ANSI/IEEE C95.1 IEEE Std 1528: 2013 FCC KDB Publication 447498 D01 v06 FCC KDB Publication 865664 D01 v01r04 FCC KDB Publication 865664 D02 v01r02 FCC KDB Publication 648474 D04 v01r03 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 19110591HKG-001.doc Page 4 of 35 2. GENERAL INFORMATION 2.1. Description of Equipment under test (EUT) *Note: 1. DECT has a TDD/TDMA frame structure with a complete frame of 10ms duration with 24 time slots. And under these 24 time slots, the first 12 slots are allocated for the transmission from base station to handsets, and the other 12 slots are for the transmission from handsets to base station. During a call, the handset of this product will use one of 24 time slots to transmit under worst case, which gives a duty cycle of 1/24 ( = 4.17%). Manufacturer: Meizhou Guo Wei Electronics Co., Ltd. Manufacturer Address: AD1 Section, Econimic Development Area, Dongsheng Industrial District, Meizhou, Guangdong Province, China 514000 Device dimension (L x W) : 164 (mm) x 48 (mm) Device thickness: 26 (mm) Antenna Gain: 0.5 dBi Operating Configuration(s) / mode: Held to head (Voice call) Tx Frequency (MHz): 1921.536MHz to 1928.448MHz Duty Cycle*: 1/24 H/W Version: N/A S/W Version: N/A Battery Type: 2.4VDC (2 x 1.2V 550mAh AAA size Ni-MH Rechargea…

Text truncated - open the document above for the full version.

2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong SAR, China. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 50 TEST REPORT Report Number: 19110587HKG-003 Application For Original Grant of 47 CFR Part 15 Certification Unlicensed Personal Communication Service Devices FCC ID: ACJ96NKX-TGBA81 Prepared and Checked by: Approved by: Signed On File Leung Chiu Kuen, Stanley Engineer Tang Kwan Mo, Jess Lead Engineer Date: July 20, 2020 TEST REPORT Panasonic Corporation of North America Intertek Report No: 19110587HKG-003 Page 2 of 50 GENERAL INFORMATION Grantee: Panasonic Corporation of North America Grantee Address: Two Riverfront Plaza, 9th Floor, Newark, New Jersey, 07102-5490, United States. FCC Specification Standard: FCC Part 15, October 1, 2019 Edition FCC ID: ACJ96NKX-TGBA81 FCC Model(s): KX-TGBA81, KX-TGB810, KX-TGB812 Type of EUT: Unlicensed Personal Communications Service Devices Description of EUT: DECT Cordless Telephone - Handset Serial Number: N/A Sample Receipt Date: November 15, 2019 Date of Test: December 18, 2019 - May 21, 2020 Report Date: July 20, 2020 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Conclusion: Test was conducted by client submitted sample. The submitted sample as received complied with the 47 CFR Part 15 Certification. TEST REPORT Panasonic Corporation of North America Intertek Report No: 19110587HKG-003 Page 3 of 50 TABLE OF CONTENTS 1.0 TEST RESULTS SUMMARY & STATEMENT OF COMPLIANCE ............................................. 5 1.1 Summary of Test Results ................................................................................................ 5 1.2 Statement of Compliance .............................................................................................. 6 2.0 GENERAL DESCRIPTION ................................................................................................. 7 2.1 Product Description......................................................................................................... 7 2.2 Technical Description ...................................................................................................... 7 2.3 Test Methodology ........................................................................................................... 7 2.4 Test Facility ..................................................................................................................... 7 3.0 SYSTEM TEST CONFIGURATION .................................................................................... 8 3.1 Justification ..................................................................................................................... 8 3.2 Radiated Emission Test Setup ......................................................................................... 9 3.3 AC Line Conducted Emission Test Setup ........................................................................ 10 3.4 Conducted Emission Test Configuration ........................................................................ 11 3.5 Conducted Monitoring and Operational Test Configuration ......................................... 11 3.6 EUT Exercising Software ................................................................................................ 11 3.7 Details of EUT and Description of Accessories ............................................................... 12 3.8 Measurement Uncertainty ............................................................................................ 12 4.0 MEASUREMENT RESULTS ............................................................................................ 13 4.1 Antenna Requirement ................................................................................................... 13 4.2 Digital Modulation Techniques...................................................................................... 13 4.3 Emission Bandwidth ...................................................................................................... 14 4.4 Directional Gain of the Antenna .................................................................................... 16 4.5 Peak Transmit Power .................................................................................................... 17 4.6 Power Spectral Density ................................................................................................. 19 4.7 Automatic Discontinuation of Transmission .................................................................. 21 4.8 Unwanted Emission Inside the Sub-Band ...................................................................... 22 4.9 Emissions Outside the Sub-Band ................................................................................... 25 4.9.1 Radiated Emissions Configuration Photographs .......…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: ACJ96NKX-TGBA81 Radiated Emission Front View Rear View

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: ACJ96NKX-TGBA81 Figure 1 – Right Cheek Figure 2 – Right Tilt INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: ACJ96NKX-TGBA81 Figure 3 – Left Cheek Figure 4 – Left Tilt