ACJ96NKX-TGCA20DECT 6.0 Handset

Digital Cordless Phone Model No. KX-TGC210 KX-TGC212 Digital Cordless Answering System Model No. KX-TGC220 KX-TGC222 KX-TG433SK KX-TGC210KX-TGC210KX-TGC210KX-TGCA20 seriesKX-TGC212KX-TGC210KX-TGCA20 KX-TGC220KX-TGC220KX-TGC220KX-TGCA20 seriesKX-TGC222KX-TGC220KX-TGCA20 KX-TG433SKKX-TGC220KX-TGCA20 3 Handset Part No.Quantity SeriesModel No. Base unit Part No. 1 2 1 2 KX-TGC210KX-TGC212KX-TG433SK KX-TGC220KX-TGC222 ① AC adaptor/PNLV226Z ② Telephone line cord ③ Rechargeable batteries ④ Handset cover *1 ⑤ Charger *1The handset cover comes attached to the handset. ①②③④⑤ 1 6 3 No. 1 11 1 –12 Accessory item/Order number 24 12 Quantity 1 Accessory itemOrder number Rechargeable HHR-4DP A *1 batteries・To order, please call 1-800-332-5368 or visit http://www.panasonic.com/batterystore Battery type: –Nickel metal hydride (Ni-MH) –2 x AAA (R03) size for each handset T-adaptorKX-J66 Range extender KX-TGA405 *2 *1Replacement batteries may have a different capacity from that of the supplied batteries. *2By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://www.panasonic.com/RangeExtender Handset (optional): KX-TGDA20 You can expand your phone system by registering optional handsets (6 max.) to a single base unit. ・Optional handset is a different design from that of the supplied handsets. ・You cannot purchase the supplied handset (KX-TGCA20) separately. . 1 4 2 3 3 . . Printed in China

EXHIBIT A STATEMENT OF SECURITY CODE This cordless telephone system has more than 1,000 billion combinations that are provided by the following means:  Provided with 128 bits for security codes.  When shipped from the factory, the security code is decided by the manufacture. It is memorized in a memory IC.  Base and Handset knows each other’s security code information.

Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7758 / [email protected] Richard Mullen, Group Manager Product Safety and Compliance Division Power of Attorney December 16, 2013 PCTP-14-F014 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Panasonic Corporation of North America hereby authorizes Nemko AS to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product, which are in compliance with FCC Part 15D. Any and all acts carried out by Nemko AS on our behalf shall have the same effects as acts of our own for a period of one year from the date of this letter. Type Filing: Original Application for DECT Cordless Telephone Handset, Model KX-TGCA20 1 Product Classification: Part 15 Unlicensed PCS Portable Tx Held to Ear (PUE) FCC ID Handset Unit ACJ96NKX-TGCA20 FCC Rule Part: FCC Part 15, Subpart D Frequency Range: 1921.536 ~ 1928.448 MHz Responsible Panasonic Corporation of North America Applicant & Grantee: Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Responsible Manufacturer: Panasonic System Networks Co., Ltd. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division 1 DECT Handset under FCC ID: ACJ96NKX-TGCA20 may be marketed with DECT Base, which will be Part 15D certified under the following FCC ID: ACJ96NKX-TGC220. Panasonic Corporation of North America Two Riverfront Plaza, 9 th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7758 / [email protected] Richard Mullen, Group Manager Product Safety and Compliance Division Request for Confidentiality December 16, 2013 PCTP-14-F014 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Type Filing: Original Application for DECT Cordless Telephone Handset, Model KX-TGCA20 Product Classification: Part 15 Unlicensed PCS Portable Tx Held to Ear (PUE) FCC ID Handset Unit ACJ96NKX-TGCA20 FCC Rule Part: FCC Part 15, Subpart D In accordance with provisions of Sections 0.457 and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain: (1) Antenna Construction; (2) Description of Electrical Circuitry; (3) Schematic Diagrams of Handset Unit and RF Unit; and (4) Block Diagram. The transmitter is not user adjustable and does not have a Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection. In accordance with FCC Public DA 04-1705, we request forty-five day short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain: (1) External Photographs of Handset Unit and RF Unit; (2) Internal Photographs of Handset Unit and RF Unit; (3) Test Setup Photographs; and (4) User Manual. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division

EXTERNAL PHOTOGRAPHS KX-TGCA20 Top View Bottom View

EXHIBIT B MARKINGS Portable Unit: FCC ID Label (Nameplate) The m arking will be shown on the battery compartment of the portable unit.

INTERNAL PHOTOGRAPHS Internal View Internal View 2 Bottom View

The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. SAR_Report_Nemko_60320_6130426_FCC_DECT_KX-TGCA20_Confidential_1 Page 1 of 29 Report Dosimetric Assessment of the Portable Device KX-TGCA20 (FCC ID: ACJ96NKX-TGCA20) According to the FCC Requirements December 11, 2013 IMST GmbH Carl-Friedrich-Gauß-Str. 2 - 4 D-47475 Kamp-Lintfort Customer Panasonic System Networks Co., Ltd. 1 - 62, 4 - chome Minoshima, Hakata, Fukuoka 812-8531 Japan The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. This version supersedes all previous versions of this report. SAR_Report_Nemko_60320_6130426_FCC_DECT_KX-TGCA20_Confidential_1 Page 2 of 29 SAR_Report_FCC_DECT_WiFI_Head_Body_1.0/10.12.2013/AR Executive Summary The KX-TGCA20 is a new cordless phone (Portable Device) from Panasonic operating in the 1920 MHz frequency range. The device has an integrated antenna and works in US DECT standard. The objective of the measurements done by IMST was the dosimetric assessment of one device in a worst case setup in head configuration. Since there was a special test software available, SAR tests in DECT were conducted with a specific channel and maximum output power during the measurement. The examinations have been carried out with the dosimetric assessment system „DASY4“. The measurements were made according to the 47 CFR § 2.1093 [47CFR] for evaluating compliance of mobile and portable devices with FCC limits for human exposure (general population) to radiofrequency emissions and IEEE 1528-2003 [IEEE1528-2003]. Additional information and guidelines given by the following FCC documents were used:  SAR Measurement Requirements for 100 MHz to 6 GHz [KDB 865664 D01 v01r01]  Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies [KDB 447498 D01 v05r01] All measurements have been performed in accordance to the recommendations given by SPEAG. SAR_Report_Nemko_60320_6130426_FCC_DECT_KX-TGCA20_Confidential_1 Page 3 of 29 SAR_Report_FCC_DECT_WiFI_Head_Body_1.0/10.12.2013/AR Compliance Statement The Panasonic KX-TGCA20 cordless phone (FCC ID: ACJ96NKX-TGCA20) is in compliance with the following standards for uncontrolled exposure:  47 CFR § 2.1093 [47CFR]  IEEE Std. C95.1 - 1999 [C95.1-1999],  IEEE Std. C95.3 - 2002 [C95.3-2002],  IEEE 1528-2003 [IEEE 1528-2003],  The latest version of all relevant FCC OET KDB Procedures Since the device does not provide a headset jack, SAR in body worn configuration are not conducted. The maximum results of SAR for the KX-TGCA20 are as follows: WORST CASE SAR RESULTS Phantom Configuration Highest Reported SAR 1g [W/kg] SAR Limit [W/kg] HEAD Left Cheek 0.071 1.6 PASS prepared by: ........................................ reviewed by: ..................................... Alexander Rahn André van den Bosch test engineer quality assurance engineer SAR_Report_Nemko_60320_6130426_FCC_DECT_KX-TGCA20_Confidential_1 Page 4 of 29 SAR_Report_FCC_DECT_WiFI_Head_Body_1.0/10.12.2013/AR Table of Contents SUBJECT OF INVESTIGATION ...................................................................................................................5 1 FCC EXPOSURE CRITERIA ................................................................................................................5 1.1 DISTINCTION BETWEEN EXPOSED POPULATION, DURATION OF EXPOSURE AND FREQUENCIES ...........6 1.2 DISTINCTION BETWEEN MAXIMUM PERMISSIBLE EXPOSURE AND SAR LIMITS ....................................6 2 THE FCC MEASUREMENT PROCEDURE .........................................................................................7 2.1 GENERAL REQUIREMENTS ..............................................................................................................7 2.2 DEVICE OPERATING NEXT TO A PERSON’S EAR ................................................................................7 2.2.1 PHANTOM REQUIREMENTS ..........................................................................................................7 2.2.2 TEST POSITIONS ........................................................................................................................7 2.2.3 TEST TO BE PERFORMED ............................................................................................................9 3 BODY-WORN CONFIGURATIONS ...................................................................................................10 3.1 POC (PTT) POSITION ...................................................................................................................11 3.2 PHANTOM REQUIREMENTS ............................................................................................................11 3.3 TEST TO BE PERFORMED ..............................................................................................................11 3.3.1 MEASUREMENT VARIABILITY .....................................................................................................11 4 THE MEASUREMENT SYSTEM ........................................................................................................12 4.1 PHANTOMS ...................................................................................................................................13 4.2 E-FIELD-PROBES ..........................................................................................................................14 4.3 MEASUREMENT PROCEDURE .........................................................................................................15 4.4 UNCERTAINTY ASSESSMENT .........................................................................................................16 5 OUTPUT POWER VALUES AND TUNE-UP INFORMATION ..............................…

Text truncated - open the document above for the full version.

The Testcenter facility ‘Dosimetric Test L ab’ within IMST GmbH is ac credited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. SAR_Report_Nemko_60320_6130426_FCC_DECT_KX-TGCA20_CalData Page 1 of 1 Appendix for the Report Dosimetric Assessment of the Portable Device KX-TGCA20 (FCC ID: ACJ96NKX-TGCA20) According to the FCC Requirements Calibration Data December 12, 2013 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Panasonic System Networks Co., Ltd. 1 - 62, 4 - chome Minoshima, Hakata, Fukuoka 812-8531 Japan The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. Cal_D1900V2_SN5d051_Sep2013_V2 Page 1 of 7 Calibration Certificate Certificate No: Cal_D1900V2_SN5d051_Sep2013_V2 Object: D1900V2 SN: 5d051 Date of Calibration: September 25, 2013 Next Calibration: September 2015 Object Condition: In Tolerance Calibration Equipment used: Test Equipment Serial Number Last calibration Calibrated by Next calibration Powermeter E4416A GB41050414 Nov 12 Rohde&Schwarz (262487-D-K-15012- 01-00-2012-11) Nov 14 Power Sensor E9301H US40010212 Nov 12 Rohde&Schwarz (262492-D-K-15012- 01-00-2012-11) Nov 14 Powermeter E4417A GB41050441 Nov 12 Rohde&Schwarz (262488-D-K-15012- 01-00-2012-11) Nov 14 Power Sensor E9301A MY41495584 Nov 12 Rohde&Schwarz (262489-D-K-15012- 01-00-2012-11) Nov 14 Network Analyzer E5071C MY46103220 Jul 13 Rohde&Schwarz (11-300285997) Jul 15 Reference Probe EX3DV4 SN 3536 Sep 12 SPEAG (EX3-3536_Sep12) Sep 13 DAE3 SN 335 Feb 13 SPEAG (DAE3-335_Feb13) Feb 14 Cal_D1900V2_SN5d051_Sep2013_V2 Page 2 of 7 Calibration is performed according the following standards: IEEE 1528-2003 "IEEE Recommended Practice for Determining the Peak Spatial - Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communication Devices: Measurement Technique", December 2003 IEC 62209-1 "Procedure to measure the Specific Absorption Rate (SAR) for hand - held devices used in close proximity to the ear (frequency range of 300 MHz to 3GHz)", February 2005 IEC 62209-2 "Evaluation of Human Exposure to Radio Frequency Fields from Handheld and Body-Mounted Wireless Communication Devices in the Frequency Range of 30 MHz to 6 GHz: Human models, Instrumentation, and Procedures ", Part 2: “Procedure to determine the Specific Absorption Rate (SAR) for including accessories and multiple transmitters” Edition 1.0, 2010-01 Additional Documentation: DASY 4/5 System Handbook prepared by: reviewed by: Alexander Rahn André van den Bosch test engineer quality assurance engineer 08 Cal_D1900V2_SN5d051_Sep2013_V2 Page 3 of 7 Measurement Conditions DASY Version: Dasy 4; V4.7 Phantom: SAM Phantom 1059 Distance Dipole Center – TSL: 10mm With spacer Area Scan resolution dx, dy = 10mm Zoom Scan resolution dx, dy, dz = 5mm Frequency: 1900 MHz ± 1MHz Head TSL Parameters Temperature Permittivity Conductivity Nominal Head TSL Parameters 22.0 40.00 1.40 Measured Head TSL Parameters 21.8 41.4 ± 6% 1.43 S/m ± 6% SAR Result with Head TSL Averaged over 1g SAR measured 250 mW input power 9.80 mW/g SAR normalized normalized to 1W 39.20 mW/g SAR for nominal Head TSL parameters normalized to 1W 39.01 mW/g ± 16.5 % (k=2) Averaged over 10g SAR measured 250 mW input power 4.93 mW/g SAR normalized normalized to 1W 19.72 mW/g SAR for nominal Head TSL parameters normalized to 1W 19.66 mW/g ± 16.5 % (k=2) Cal_D1900V2_SN5d051_Sep2013_V2 Page 4 of 7 Body TSL Parameters Temperature Permittivity Conductivity Nominal Body TSL Parameters 22.0 53.30 1.52 Measured Body TSL Parameters 21.7 55.00 ± 6% 1.51 S/m ± 6% SAR Result with Body TSL Averaged over 1g SAR measured 250 mW input power 9.53 mW/g SAR normalized normalized to 1W 38.12 mW/g SAR for nominal Body TSL parameters normalized to 1W 38.54 mW/g ± 16.5 % (k=2) Averaged over 10g SAR measured 250 mW input power 4.85 mW/g SAR normalized normalized to 1W 19.40 mW/g SAR for nominal Body TSL parameters normalized to 1W 19.54 mW/g ± 16.5 % (k=2) General Antenna Parameters Antenna Parameters with Head TSL Impedance, transformed to feed point 47.6 Ω + 0.21 jΩ Return Loss -32.05 dB Antenna Parameter with Body TSL Impedance, transformed to feed point 52.4 Ω – 0.83 jΩ Return Loss -32.06 dB After long term use with 100W radiated power, only a slight warming of the dipole near the feed point can be measured. The dipole is made of standard semigrid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short-circuited for DC signals. Additional EUT Data Manufactured by: SPEAG Manufactured on: May, 2004 Cal_D1900V2_SN5d051_Sep2013_V2 Page 5 of 7 SAR Result with Head TSL Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 250913_b_3536.da4 DUT: Dipole 1900 MHz SN: 5d051; Type: D1900V2; Serial: D1900V2 - SN5d051 Program Name: System Performance Check at 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.43 mho/m; ε r = 41.4; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.41, 8.41, 8.41); Calibrated: 24.09.2012 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 18.02.2013 - Phantom: SAM Glycol 1176; Type: Speag; Serial: 1176 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 10.8 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 87.1 V/m; Power Drift = -0.014 dB Peak SAR (extrapolated) = 19.2 W/kg SAR(1 g) = 9.8 mW/g; SAR(10 g) = 4.93 mW/g Maximum value of SAR (measur…

Text truncated - open the document above for the full version.

The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. SAR_Report_Nemko_60320_6130426_FCC_DECT_KX-TGCA20_Plots Page 1 of 5 Appendix for the Report Dosimetric Assessment of the Portable Device KX-TGCA20 (FCC ID: ACJ96NKX-TGCA20) According to the FCC Requirements SAR Distribution Plots December 12, 2013 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Panasonic System Networks Co., Ltd. 1 - 62, 4 - chome Minoshima, Hakata, Fukuoka 812-8531 Japan The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. This version supersedes all previous versions of this report. SAR_Report_Nemko_60320_6130426_FCC_DECT_KX-TGCA20_Plots Page 2 of 5 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo 1 SAR Distribution Plots, Head Measurement Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: TGCA20_yplm_1.da4 DUT: Panasonic; Type: KX-TGCA20; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.45 mho/m; ε r = 40.8; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(5.05, 5.05, 5.05); Calibrated: 19.02.2013 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 23.09.2013 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Cheek Left/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.066 mW/g Cheek Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.24 V/m; Power Drift = -0.075 dB Peak SAR (extrapolated) = 0.143 W/kg SAR(1 g) = 0.071 mW/g; SAR(10 g) = 0.037 mW/g Maximum value of SAR (measured) = 0.080 mW/g Fig. 1: SAR distribution for DECT US, channel 2, cheek position, left side of head, (December 06, 2013). SAR_Report_Nemko_60320_6130426_FCC_DECT_KX-TGCA20_Plots Page 3 of 5 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: TGCA20_yplm_2.da4 DUT: Panasonic; Type: KX-TGCA20; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.45 mho/m; ε r = 40.8; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(5.05, 5.05, 5.05); Calibrated: 19.02.2013 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 23.09.2013 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Tilted Left/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.034 mW/g Tilted Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.03 V/m; Power Drift = -0.115 dB Peak SAR (extrapolated) = 0.066 W/kg SAR(1 g) = 0.034 mW/g; SAR(10 g) = 0.020 mW/g Maximum value of SAR (measured) = 0.038 mW/g Fig. 2: SAR distribution for DECT US, channel 2, tilted position, left side of head, (December 06, 2013). SAR_Report_Nemko_60320_6130426_FCC_DECT_KX-TGCA20_Plots Page 4 of 5 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: TGCA20_yprm_1.da4 DUT: Panasonic; Type: KX-TGCA20; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.45 mho/m; ε r = 40.8; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(5.05, 5.05, 5.05); Calibrated: 19.02.2013 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 23.09.2013 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Cheek Right/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.062 mW/g Cheek Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.08 V/m; Power Drift = -0.086 dB Peak SAR (extrapolated) = 0.109 W/kg SAR(1 g) = 0.066 mW/g; SAR(10 g) = 0.036 mW/g Maximum value of SAR (measured) = 0.072 mW/g Fig. 3: SAR distribution for DECT US, channel 2, cheek position, right side of head, (December 06, 2013). SAR_Report_Nemko_60320_6130426_FCC_DECT_KX-TGCA20_Plots Page 5 of 5 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: TGCA20_yprm_2.da4 DUT: Panasonic; Type: KX-TGCA20; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.45 mho/m; ε r = 40.8; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(5.05, 5.05, 5.05); Calibrated: 19.02.2013 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 23.09.2013 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Tilted Right/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.036 mW/g Tilted Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.24 V/m; Power Drift = -0.123 dB Peak SAR (extrapolated) = 0.061 W/kg SAR(1 g) = 0.037 mW/g; SAR(10 g) = 0.021 mW/g Maximum value of SAR (measured) = 0.041 mW/g Fig. 4: SAR distribution for DECT US, channel 2, tilted position, right side of head, (December 06, 2013)

Report No. 248567-8 Template version: B Nemko Norway Nemko AS, Instituttveien 6, P.O. Box 96 Kjeller, 2007 Kjeller, Norway TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected] ENTERPRISE NUMBER NO974404532 nemko.com/no Test Report Product UPCS Handset Name and address of the applicant Panasonic Corporation of North America Name and address of the manufacturer Panasonic System Networks Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku Fukuoka 812-8531, Japan Model KX-TGCA20 Rating 2.4 V DC (Secondary Batteries, 2xAAA Ni-MH cells) Trademark Panasonic Serial number / Additional information DECT 6.0 Tested according to FCC Part 15, subpart D Isochronous UPCS Device, 1920 – 1930 MHz Industry Canada RSS 213, Issue 2 2 GHz License-exempt Personal Communications Service Devices (LE-PCS) Order number 248567 Tested in period 2013.12.11 to 2013.12.17 Issue date 2013.12.17 Name and address of the testing laboratory Instituttveien 6 Kjeller, Norway FCC No: 994405 IC OATS: 2040D-1 TEL: (+47) 22 96 03 30 FAX: (+47) 22 96 05 50 Prepared by [Frode Sveinsen] Approved by [G.Suhanthakumar] This report shall not be reproduced except in full without the written approval of Nemko. Opinions and interpretations expressed within this report are not part of the current accreditation. This report was originally distributed electronically with digital signatures. For more information contact Nemko. TEST REPORT FCC part 15D Report no.: 248567-8 FCC ID: ACJ96NKX-TGCA20 Nemko Norway, Instituttveien 6, Kjeller, Norway Page 2 (46) CONTENTS 1 INFORMATION ................................................................................................................................. 3 1.1 Tested Item........................................................................................................................................ 3 1.2 Description of Tested Device ............................................................................................................. 3 1.3 Exposure Evaluation .......................................................................................................................... 3 1.4 Test Environment .............................................................................................................................. 4 1.5 Test Engineer(s) ................................................................................................................................ 4 1.6 Test Equipment ................................................................................................................................. 4 1.7 Other Comments ............................................................................................................................... 4 2 TEST REPORT SUMMARY .............................................................................................................. 5 2.1 General .............................................................................................................................................. 5 2.2 Test Summary ................................................................................................................................... 6 3 TEST RESULTS ................................................................................................................................ 7 3.1 Power Line Conducted Emissions ..................................................................................................... 7 3.2 Coordination with fixed microwave .................................................................................................. 10 3.3 Digital Modulation Techniques ........................................................................................................ 10 3.4 Labeling Requirements ................................................................................................................... 10 3.5 Antenna Requirement...................................................................................................................... 11 3.6 Channel Frequencies ...................................................................................................................... 11 3.7 Automatic Discontinuation of Transmission .................................................................................... 12 3.8 Peak Power Output ......................................................................................................................... 13 3.9 Emission Bandwidth B ..................................................................................................................... 16 3.10 Power Spectral Density ................................................................................................................... 19 3.11 In-Band Unwanted Emissions, Conducted ...................................................................................... 22 3.12 Out-of-band Emissions, Conducted................................................................................................. 24 3.13 Carrier Frequency Stability .............................................................................................................. 28 3.14 Frame Repetition Stability ............................................................................................................... 29 3.15 Frame Period and Jitter ................................................................................................................... 29 3.16 Monitoring Threshold, Least Interfered Channel ............................................................................. 31 3.17 Threshold Monitoring Bandwidth ..................................................................................................... 33 3.18 Reaction Time and Monitoring Interval ............................................................................................ 34 3.19 Time and Spectrum Window Access Procedure ...........................................................................…

Text truncated - open the document above for the full version.

FCC ID: ACJ96NKX-TGCA20 Project no.: 248567 Page 1 of 1 PHOTOS OF TEST SET-UP – KX-TGCA20 Power line Conducted Emissions Test

The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accr…

Text truncated - open the document above for the full version.