ACJ96NKX-WT126DECT 6.0 Cordless Telephone Handset for PBX

Model No. KX-WT125/KX-WT126 Operating Instructions DECT 6.0 Portable Station Thank you for purchasing a Panasonic DECT 6.0 Portable Station. Please read this manual carefully before using this product and save this manual for future use. Please use only the batteries provided and charge the batteries for about 7 hours before using the handset for the first time. Document Version 2010-10 Table of Contents Before Initial Use ......................................................................................4 Accessories (included) ..................................................................................4 Installation ......................................................................................................5 Battery Installation ......................................................................................5 Charger Connection ....................................................................................5 Charging the Batteries ................................................................................6 Charger Wall Mounting ...............................................................................6 Attaching the Belt Clip .................................................................................7 Before Operating the Handset ................................................................8 Location of Controls ......................................................................................8 Key Lock ...................................................................................................10 Silent Mode ...............................................................................................10 Advanced Voice Clarity .............................................................................10 Selecting the Display Language .................................................................11 Editing the Standby Display Name .............................................................12 Editing the Names of the Flexible CO Keys ...............................................13 Editing the Names of the Soft Keys for the Flexible CO Keys .................14 Adjusting the Ringer Volume ......................................................................15 Adjusting the Ringer Volume or Turning the Ringer off while Ringing ..........................................................................................................15 Changing the Vibrate Setting (KX-WT126 only) ........................................16 Adjusting the Receiver/Speaker/Headset Volume ....................................16 Display ..........................................................................................................17 Soft Keys .......................................................................................................18 Operation Outline .........................................................................................19 Function Keys ..............................................................................................20 Flexible CO Keys ..........................................................................................22 Operation ................................................................................................23 Making Calls .................................................................................................23 Searching for an item stored in the Phonebook ........................................27 Receiving Calls .............................................................................................30 Caller ID ....................................................................................................31 During a Conversation .................................................................................32 Useful Features ............................................................................................34 Making Use of the Voice Mail Service ........................................................39 Using the Handset Phonebook .............................................................41 Handset Phonebook ....................................................................................41 Private Ring ..............................................................................................41 Storing an Item in the Handset Phonebook ...............................................42 Storing a New Item ...................................................................................42 Editing a Stored Item ................................................................................43 Storing an Item Using Predialing ..............................................................45 Storing an Item Using the Outgoing Call Log ............................................46 Storing an Item Using the Incoming Call Log ............................................47 Storing an Item Using the PBX System/Extension Phonebook ................48 2 Table of Contents Editing Category Names ...........................................................................49 Assigning Hot Keys .....................................................................................50 Entering Characters .....................................................................................51 Character Mode Table ..............................................................................52 Locking the Handset Phonebook ...............................................................53 Locking/Unlocking the Handset Phonebook .............................................53 Unlocking the Handset Phonebook Temporarily .......................................53 Deleting Stored Items ............................................................................54 Deleting Stored Items in Handset Phonebook/Hot Key Dial/Outgoing Call Log/Incoming Call Log ................................................................................54 Handset Phonebook ......…

Text truncated - open the document above for the full version.

EXHIBIT A STATEMENT OF SECURITY CODE This cordless telephone system has more than 1,000 billion combinations that are provided by the following means: ∑ Provided with 128 bits for security codes. ∑ When shipped from the factory, the security code is decided by the manufacture. It is memorized in a memory IC. ∑ Base and Handset knows each other’s security code information.

Difference between KX-WT125 and WT126 The difference between KX-WT126 and KX-WT125 is with or without vibrator. KX-WT126 have the vibrator motor and the circuit to control of it, and KX-WT125 doesn’t have them. These two product use the same P.C.B. and then the components which are enclosed with broken line in following circuit diagram are not mounted on KX-WT125.

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] Richard Mullen Group Manager Product Safety and Compliance Division Power of Attorney September 6, 2010 PCNF-10-F105 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; We, the undersigned, Panasonic Corporation of North America, hereby authorizes Nemko AS to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product in compliance with FCC Part 15D. Any and all acts carried out by Nemko AS on our behalf shall have the same effects as acts of our own for a period of one year from the date of this letter. FCC Classification: Part 15 Unlicensed PCS Portable Tx Held to Ear (PUE) Product Name: DECT 6.0 Cordless Telephone Handset for PBX FCC Rule Part: FCC Part 15, Subpart D 1 FCC ID Handset ACJ96NKX-WT126 Responsible Panasonic Corporation of North America [PNA] Applicant & Grantee: One Panasonic Way, Secaucus, NJ 07094 FRN Number: 0003762242 Responsible Manufacturer: Panasonic System Networks Co., Ltd. [PSN] Responsible Sales Company: Panasonic System Networks Company of America [PSNA] Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division 1 The subject handset will be separately TCB certified by Nemko-Communication Certification Laboratory for compliance with FCC Part 68 under Certification ID Number US: ACJNANKX-WT126. This product’s associated base units were TCB certified under FCC ID’s: ACJ96NKX-T0155, ACJ96NKX-T0158 and ACJ96NKX-NCP0158. Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] Richard Mullen Group Manager Product Safety and Compliance Division Request for Confidentiality September 6, 2010 PCNF-10-F105 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; FCC Classification: Part 15 Unlicensed PCS Portable Tx Held to Ear (PUE) Product Name: DECT 6.0 Cordless Telephone Handset for PBX FCC Rule Part: FCC Part 15, Subpart D FCC ID Handset ACJ96NKX-WT126 In accordance with provisions of Sections 0.457 and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain: (1) Antenna Construction; (2) Description of Electrical Circuitry; (3) Schematic Diagrams of Handset and RF Unit; and (4) Block Diagram. The transmitter is not user adjustable and does not have a Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection. In accordance with FCC Public DA 04-1705, we request forty-five day short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain: (1) External Photographs of Handset and RF Unit; (2) Internal Photographs of Handset and RF Unit; (3) Test Setup Photographs; and (4) User Manual. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division

FCC Part 15D – Compliance Information PCNF-10-F105 / FCC ID: ACJ96NKX-WT126 pncf-10-f105 (fcc part 15d declarations for fcc id-acj96nkx-wt126).doc 8-Dec-2006 page 1 (4) rev.1.4 EUT AND PRODUCT INFORMATION Type of Equipment UPCS (DECT 6.0) Applicant Name Panasonic System Networks Co., Ltd. Address 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka, 812-8531, Japan Contact Michihito Miyazaki FP PP Repeater EUT Type/System FCC ID ACJ96NKX-WT126 Model name KX-WT126 and KX-WT125 HW Version PNLB1882 SW Version Ver00.012B Max antenna Gain -0.1dBi Can the EUT be Initiating Device YES NO YES Does the EUT transmit signaling channels YES YES YES Max number of slots in use simultaneously 2 Test standard: FCC part 15D Other: Industry Canada RSS-213, Issue 2 Frequency Band 1921.536 – 1928.448 MHz # of RF Channels 5 Frame Period 10 ms Max. Burst length 394μsec Min. Burst Length - # of Logical Channels 60 (12 duplex channels per RF carrier) Operating Mode Simplex Duplex FCC Part 15D – Compliance Information PCNF-10-F105 / FCC ID: ACJ96NKX-WT126 pncf-10-f105 (fcc part 15d declarations for fcc id-acj96nkx-wt126).doc 8-Dec-2006 page 2 (4) rev.1.4 ANTENNAS Antenna Type Internal External 1 2 3 4 Base (FP) or Repeater Does RX and TX use the same antenna(s)? Yes No Antenna Type Internal External 1 Wired Antenna 2 Handset (PP) Does RX and TX use the same antenna(s)? Yes No ANTENNA DIVERSITY Diversity Supported Antenna TX RX 1 2 3 Base (FP) or Repeater 4 1 NO NO Handset (PP) 2 VOLTAGE AND TEMPERATURE RANGES VOLTAGES FP PP Repeater Nominal Voltage 2.4Vdc Cut-Off Voltage (if applicable) 2.1Vdc POWER SOURCE Type Manufacturer Base or Repeater Handset (PP) (charger) Two Ni-MH Batteries Data Connections PSTN Others (please specify) ....Connect with host PBX via base unit. FCC Part 15D – Compliance Information PCNF-10-F105 / FCC ID: ACJ96NKX-WT126 pncf-10-f105 (fcc part 15d declarations for fcc id-acj96nkx-wt126).doc 8-Dec-2006 page 3 (4) rev.1.4 ANCILLARY EQUIPMENT Description Charger Cradle AC Adaptor Type PSLP1688ZA PQLV219 Manufacturer Panasonic Panasonic HOST DEVICE Description Type Manufacturer ADDITIONAL INFORMATION This product is a DECT6.0 Cordless Telephone Handset for use with PBX, Model KX-WT126 and KX-WT125. The difference between KX-WT126 and KX-WT125 is with or without vibrator. KX-WT126 has a vibration motor and the circuit to control of it, and KX-WT125 doesn’t have them. FCC Part 15D – Compliance Information PCNF-10-F105 / FCC ID: ACJ96NKX-WT126 pncf-10-f105 (fcc part 15d declarations for fcc id-acj96nkx-wt126).doc 8-Dec-2006 page 4 (4) rev.1.4 MANUFACTURERS DECLARATIONS FCC part 15.323 (c)(5) No device or group of co-operating devices located within 1m of each other shall during any frame period occupy more than 6 MHz of aggregate bandwidth, or alternatively, more than one third of the time and spectrum windows defined by the system. Applicant Agrees Yes No FCC part 15.323 (c)(10) The applicant hereby declares that the system in this application does use the criteria of (c)(10) of this section. Applicant Agrees Yes No FCC part 15.323 (c)(11) The applicant hereby declares that system in this application does not use the criteria of (c)(11) of this section. Applicant Agrees Yes No FCC part 15.323 (c)(12) The provisions of (c)(10) or (c)(11) of this section shall not be used to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. Applicant Agrees Yes No FCC part 15.307 (b) The Applicant is a participating member of UTAM, Inc. and will provide an affidavit from UTAM, Inc. certifying this. Confirmed By Applicant Yes No ADDITIONAL REMARKS: > DECLARED BY: September 6, 2010 Richard Mullen Richard Mullen

Temporary Confidential EXTERNAL PHOTOGRAPHS Front view Rear view

EXHIBIT B MARKINGS NOTE: Above markings are shown inside the battery cover

Temporary Confidential INTERNAL PHOTOGRAPHS

DAT-P-152/98-01 SAR_Report_Nemko_6620_821_FCC_CalData_KX-WT126 Appendix for the Report Dosimetric Assessment of the Portable Device Panasonic KX-WT126 (FCC ID: ACJ96NKX-WT126) According to the FCC Requirements Calibration Data August 26, 2010 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Pansonic System Networks Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531 Japan Dasy_Report_FCC_DECT_1900_1.1.doc/22.05.2006/CH DAT-P-152/98-01 Cal_D1900V2_SN5d051_0909 Page 1 of 8 _ Calibration_Certificate_Dipole_V1.0/01.08.2009/ABo Calibration Certificate Certificate No: Cal_D1900V2_SN5d051_0909 Object: D1900V2 SN: 5d051 Date of Calibration: September 09, 2009 Next Calibration: September 2011 Object Condition: In Tolerance Calibration Equipment used: Test Equipment Serial Number Last calibration Calibrated by Next calibration Powermeter E4416A GB41050414 Dec 08 Agilent Techn. (ISO/IEC 17025, 1-1784162174-1) Dec 10 Power Sensor E9301H US40010212 Dec 08 Agilent Techn. (ISO/IEC 17025, 1-1784041195-1) Dec 10 Powermeter E4417A GB41050441 Dec 08 Agilent Techn. (ISO/IEC 17025, 1-1674038198-1) Dec 10 Power Sensor E9301A MY41495584 Dec 08 Agilent Techn. (ISO/IEC 17025, 1-1784041307-1) Dec 10 Network Analyzer E5071C MY46103220 Aug 09 Rohde& Schwarz (14967-DKD-00201- 2009-08) Aug 10 Reference Probe ET3DV6 SN 1669 Feb 09 SPEAG, No ET3- 1669_Feb09 Feb 10 DAE3 SN 335 Feb 09 SPEAG, No DAE3- 335_Feb09 Feb 10 Cal_D1900V2_SN5d051_0909 Page 2 of 8 Calibration is performed according the following standards: IEEE 1528-2003 "IEEE Recommended Practice for Determining the Peak Spatial - Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communication Devices: Measurement Technique", December 2003 IEC 62209-1 "Procedure to measure the Specific Absorption Rate (SAR) for hand - held devices used in close proximity to the ear (frequency range of 300 MHz to 3GHz)", February 2005 Federal Communications Commission Office of Engineering & Technologies (FCCOET) "Evaluating Compliance wit FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01-01) to Bulletin 65 Additional Documentation: DASY 4 System Handbook prepared by: reviewed by: Alexander Rahn André van den Bosch test engineer quality assurance engineer 08/ABo Cal_D1900V2_SN5d051_0909 Page 3 of 8 Measurement Conditions DASY Version: Dasy 4; V4.7 Phantom: SAM Phantom 1340 Distance Dipole Center – TSL: 10mm With spacer Zoom Scan res. dx, dy, dz = 5mm Frequency: 1900 MHz ± 1MHz Head TSL Parameters Temperature Permittivity Conductivity Nominal Head TSL Parameters 22.0 40.0 1.40 Measured Head TSL Parameters 22.0 40.3 ± 6% 1.45 S/m ± 6% SAR result with Head TSL Averaged over 1g SAR measured 250mW input power 9.10 mW/g SAR normalized normalized to 1W 36.40 mW/g SAR for nominal Head TSL parameters normalized to 1W 35.90 mW/g ± 16.5 % (k=2) Averaged over 10g SAR measured 250mW input power 4.76 mW/g SAR normalized normalized to 1W 19.04 mW/g SAR for nominal Head TSL parameters normalized to 1W 18.96 mW/g ± 16.5 % (k=2) Cal_D1900V2_SN5d051_0909 Page 4 of 8 Body TSL Parameters Temperature Permittivity Conductivity Nominal Body TSL Parameters 22.0 53.30 1.52 Measured Body TSL Parameters 22.0 52.90 ± 6% 1.54 S/m ± 6% SAR result with Body TSL Averaged over 1g SAR measured 250mW input power 9.42 mW/g SAR normalized normalized to 1W 37.68 mW/g SAR for nominal Body TSL parameters normalized to 1W 37.28 mW/g ± 16.5 % (k=2) Averaged over 10g SAR measured 250mW input power 4.97 mW/ g SAR normalized normalized to 1W 19.88 mW/g SAR for nominal Body TSL parameters normalized to 1W 19.77 mW/g ± 16.5 % (k=2) General Antenna Parmeters Antenna Parameters with Head TSL Impedance, transformed to feed point 48.2 jΩ - 1.3 jΩ Return Loss -33.0 dB Antenna Parameter with Body TSL Impedance, transformed to feed point 53.9 jΩ - 0.4 jΩ Return Loss -28.3 dB After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semigrid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short-circuited for DC signals. Additional EUT Data Manufactured by: SPEAG Manufactured on: January 15, 1998 Cal_D1900V2_SN5d051_0909 Page 5 of 8 SAR result with Head TSL Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 090909_b_1669.da4 DUT: Dipole 1900 MHz SN: 5d051; Type: D1900V2; Serial: D1900V2 - SN5d051 Program Name: System Performance Check at 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.45 mho/m; ε r = 40.3; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(5.11, 5.11, 5.11); Calibrated: 10.02.2009 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 09.02.2009 - Phantom: SAM Glycol 1176; Type: Speag; Serial: 1176 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 10.4 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 91.3 V/m; Power Drift = -0.152 dB Peak SAR (extrapolated) = 15.9 W/kg SAR(1 g) = 9.1 mW/g; SAR(10 g) = 4.76 mW/g Maximum value of SAR (measured) = 10.3 mW/g Cal_D1900V2_SN5d051_0909 Page 6 of 8 SAR result with Body TSL Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 090909_b_1669.da4 DUT: Dipole 1900 MHz SN: 5d051; Type: D1900V2; Serial: D1900V2 - SN5d051 Program Name: System Performance Check at 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.54 mho/m; ε r = 52.9; ρ = 1000 kg/m 3 Phanto…

Text truncated - open the document above for the full version.

DAT-P-152/98-01 SAR_Report_Nemko_6620_821_FCC_DECT_KX-WT126_Confidential Page 1 of 30 Report Dosimetric Assessment of the Portable Device Panasonic KX-WT126 (FCC ID: ACJ96NKX-WT126) According to the FCC Requirements August 26, 2010 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Panasonic System Networks Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531 Japan The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. Dasy_Report_FCC_DECT_1900_1.2.doc/16.05.2008/ABo SAR_Report_Nemko_6620_821_FCC_DECT_KX-WT126_Confidential Page 2 of 30 Dasy_Report_FCC_DECT_1900_1.2.doc/16.05.2008/ABo Executive Summary The KX-WT126 is a cordless telephone (Portable Device) from Panasonic operating in the 1920 MHz frequency range (US DECT Standard). The objective of the measurements done by IMST was the dosimetric assessment of one device in a worst case setup, the handset was set to use one specific frequency during the measurement. The examinations have been carried out with the dosimetric assessment system „DASY4“. The measurements were made according to the Supplement C to OET Bulletin 65 of the Federal Communications Commission (FCC) Guidelines [OET 65] for evaluating compliance of mobile and portable devices with FCC limits for human exposure (general population) to radiofrequency emissions. All measurements have been performed in accordance to the recommendations given by SPEAG. Compliance Statement The Panasonic KX-WT126 cordless telephone (FCC ID: ACJ96NKX-WT126) is in compliance with the Federal Communications Commission (FCC) Guidelines [OET 65] for uncontrolled exposure. The phone was tested in addition to the head positions in the following body worn configurations:  Belt clip and Headset attached (Display towards the phantom, distance 0 mm)  Belt clip and Headset attached (display towards the ground, distance 0 mm) Maximum SAR 1g = 0.008 W/kg (Head position, Cheek left, Channel 2) prepared by: ........................................... reviewed by: ..................................... Alexander Rahn André van den Bosch test engineer quality assurance engineer IMST GmbH Carl-Friedrich-Gauß-Straße 2 D-47475 Kamp-Lintfort Tel. +49- 2842-981 378 Fax +49- 2842-981 399 email: [email protected] SAR_Report_Nemko_6620_821_FCC_DECT_KX-WT126_Confidential Page 3 of 30 Dasy_Report_FCC_DECT_1900_1.2.doc/16.05.2008/ABo Table of Contents 1 SUBJECT OF INVESTIGATION .................................................................................................................... 4 2 THE IEEE STANDARD C95.1-1999 AND THE FCC EXPOSURE CRITERIA ....................................... 4 2.1 DISTINCTION BETWEEN EXPOSED POPULATION, DURATION OF EXPOSURE AND FREQUENCIES ........... 4 2.2 DISTINCTION BETWEEN MAXIMUM PERMISSIBLE EXPOSURE AND SAR LIMITS ....................................... 5 2.3 SAR LIMIT .................................................................................................................................................. 5 3 THE FCC MEASUREMENT PROCEDURE ................................................................................................. 6 3.1 GENERAL REQUIREMENTS......................................................................................................................... 6 3.2 DEVICE OPERATING NEXT TO A PERSON’S EAR ....................................................................................... 6 4 BODY-WORN CONFIGURATIONS .............................................................................................................. 9 4.1 POC (PTT) POSITION .............................................................................................................................. 10 4.2 PHANTOM REQUIREMENTS ...................................................................................................................... 10 4.3 TEST TO BE PERFORMED ......................................................................................................................... 10 5 THE MEASUREMENT SYSTEM ................................................................................................................. 10 5.1 PHANTOM ................................................................................................................................................. 12 5.2 PROBE ...................................................................................................................................................... 12 5.3 MEASUREMENT PROCEDURE .................................................................................................................. 13 5.4 UNCERTAINTY ASSESSMENT ................................................................................................................... 14 6 SAR RESULTS ............................................................................................................................................... 15 7 EVALUATION ................................................................................................................................................. 16 8 APPENDIX ....................................................................................................................................................... 17 8.1 ADMINISTRATIVE DATA ............................................................................................................................ 17 8.2 DEVICE UNDER TEST AND TEST CONDITIONS ......................................................................................... 17 8.3 TISSUE RECIPES ...................................................................................................................................... 17 8.4 MATERIAL PARAMETERS ......................................................................................................................... 18 8.5 SIMPLIFIED PERFORMANCE CHECKING .........…

Text truncated - open the document above for the full version.

DAT-P-152/98-01 SAR_Report_Nemko_6620_821_FCC_DECT_1900_KX-WT126_Pictures Page 1 of 5 Appendix for the Report Dosimetric Assessment of the Portable Device Panasonic KX-WT126 (FCC ID: ACJ96NKX-WT126) According to the FCC Requirements Pictures August 26, 2010 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Panasonic System Networks Co., Ltd 1 - 62, 4 - chome, Minoshima, Hakata-ku, Fukuoka 812-8531 Japan The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. dasy_report_fcc_DECT_1900_pictures_1.0.doc/08.12.2006/CH SAR_Report_Nemko_6620_821_FCC_DECT_1900_KX-WT126_Pictures Page 2 of 5 dasy_report_fcc_DECT_1900_pictures_1.0.doc/08.12.2006/CH 1 Subject of Investigation Fig. 1: Pictures of the device under test 8.9 Pictures of the device under test Fig. 14 – Fig. 15 show the device under test and the used accessories. Fig. 14: Pictures of the device under test Fig. 15: Pictures of the used accessory under test. SAR_Report_Nemko_6620_821_FCC_DECT_1900_KX-WT126_Pictures Page 3 of 5 dasy_report_fcc_DECT_1900_pictures_1.0.doc/08.12.2006/CH 8.10 Test Positions for the Device under Test Fig. 16 - 21 show the test positions for the SAR measurements. Fig. 16: Cheek position, left side. Fig. 17: Tilted position, left side. SAR_Report_Nemko_6620_821_FCC_DECT_1900_KX-WT126_Pictures Page 4 of 5 dasy_report_fcc_DECT_1900_pictures_1.0.doc/08.12.2006/CH Fig. 18: Cheek position, right side. Fig. 19: Tilted position, right side. SAR_Report_Nemko_6620_821_FCC_DECT_1900_KX-WT126_Pictures Page 5 of 5 dasy_report_fcc_DECT_1900_pictures_1.0.doc/08.12.2006/CH Fig. 20: Body worn configuration, with headset attached, display towards the phantom. Fig. 21: Body worn configuration , with headset attached, display towards the ground.

DAT-P-152/98-01 SAR_Report_Nemko_6620_821_FCC_DECT_SAR Plots_KX-WT126 Page 1 of 11 Appendix for the Report Dosimetric Assessment of the Portable Device Panasonic KX-WT126 (FCC ID: ACJ96NKX-WT126) According to the FCC Requirements SAR Distribution Plots August 26, 2010 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Panasonic System Netowrk Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531 Japan The test results only relate to the items tested.This report shall not be reproduced except in full without the written approval of the testing laboratory. dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo SAR_Report_Nemko_6620_821_FCC_DECT_SAR Plots_KX-WT126 Page 2 of 11 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Table of Contents 1 SAR DISTRIBUTION PLOTS, HEAD MEASUREMENTS ......................................................................... 3 2 SAR DISTRIBUTION PLOTS, BODY MEASUREMENTS ........................................................................ 7 3 SAR Z-AXIS SCANS (VALIDATION) ........................................................................................................... 9 4 SAR Z-AXIS SCANS (MEASUREMENTS) ................................................................................................ 10 SAR_Report_Nemko_6620_821_FCC_DECT_SAR Plots_KX-WT126 Page 3 of 11 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo 1 SAR Distribution Plots, Head Measurements Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: WT126_yplm_1.da4 DUT: Panasonic; Type: KX-WT126; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.44 mho/m; ε r = 38.9; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1579; ConvF(5.09, 5.09, 5.09); …

Text truncated - open the document above for the full version.