ACJ96NVL-CM851ADECT Door Camera for Wireless Door Camera System, Model VL-SDM200A

VL-CM851A VL-DM200AVL-MDM200A Operating Instructions Model No.VL-SDM200A Including: VL-DM200A VL-MDM200A VL-CM851A Wireless Door Camera Thank you for purchasing a Panasonic product. Please read this manual before using the unit and save for future reference. Introduction Product descriptions ...........................................3 Accessory information ........................................4 Important Information For your safety ....................................................5 Important safety instructions ...............................7 For best performance .........................................8 Other information ................................................9 Getting Started Location of controls ...........................................11 Monitor display ..................................................13 Charging the Wireless Monitor .........................15 Setting the date and time ..................................16 Attaching the Wireless Camera ........................17 How to use Monitoring the outside ......................................23 Recording displayed images .............................24 Viewing recorded images .................................25 Programming function settings .........................27 Useful Information Adding extra Wireless Monitors (Pairing) ............................................................29 Canceling unused Wireless Monitors ...............30 Replacing batteries or battery packs ................30 Cleaning ............................................................30 Help Troubleshooting ................................................32 Error messages ................................................35 General Information Specifications ....................................................37 For users in the United States Only (FCC and other information) .......................................................40 For users in Canada Only (Industry Canada Notices and other information) ..........................41 Quick Reference Guide (in Spanish) Quick Reference Guide (in Spanish) ................42 Appendix Customer services (For United States) .............45 Warranty (For United States) ............................46 Warranty (For Canada) .....................................48 Index Index..................................................................50 2 Table of Contents Product descriptions Product figure VL-CM851A *1 VL-MDM200A *2 VL-DM200A *3 Description in this manual Wireless CameraBase UnitWireless Monitor *1 The Wireless Camera is used by attaching it to the front door of a house or apartment (page 17). *2 The Base Unit is needed in order to view images from the Wireless Camera on the Wireless Monitor. Always use the Base Unit with it connected to a power supply. *3 The Wireless Monitor is portable, allowing you to easily check your front door with images from the Wireless Camera. Including the included Wireless Monitor, a total of 4 Wireless Monitors can be used with a single Wireless Camera. For information on additional accessories, see page 4. Flow of images and audio images audio images audio Wireless Camera Wireless MonitorBase Unit Important: RImages cannot be viewed on the Wireless Monitor if the Base Unit is not connected to a power supply. 3 Introduction Accessory information Supplied accessories A Double-sided tape *1 ... ́ 1 Order No. PNHX1536ZA B Hex key *1 ... ́ 1 C Screws *1 ... ́ 2 D Battery pack *2 ... ́ 1 E Operating Instructions *3 ... ́ 1 *1 Used for the Wireless Camera and for installation. *2 Used for the Wireless Monitor. *3 Containing English Operating Instructions, French Operating Instructions, and Spanish Quick Reference Guide. Additional/replacement accessories – Wireless Monitor: VL-DM200A *1 – Battery pack for Wireless Monitor: CGA-LB102 *1 *1 As of August, 2012. Note: RDesign and specifications are subject to change without notice. RThe illustrations in these instructions may vary slightly from the actual product. License: RPortions of this software are based in part on the work of the Independent JPEG Group. Trademarks: RAll other trademarks identified herein are property of their respective owners. This product is not designed to be used to prevent theft or intrusions. Panasonic assumes no liability for any accidents or damages occurring in such cases. 4 Introduction For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection RUse only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. RDo not overload power outlets and extension cords. This can result in the risk of fire or electric shock. RCompletely insert the power plug into the power outlet. Failure to do so may cause electric shock and/ or excessive heat resulting in a fire. RRegularly remove any dust, etc. from the power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. RIf the unit emits smoke or an abnormal smell, or makes an unusual noise, immediately unplug the power plug from the power outlet and remove the battery pack. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center. RNever touch the plug with wet hands. Danger of electric shock exists. Installation RDo not use the unit in areas that are exposed to rain, moisture, steam, or oily smoke, or areas that have excessive dust. This may cause fire or electric shock. RDo not install or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. RDo not perform any actions (such as damaging, altering, exposing …

Text truncated - open the document above for the full version.

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] Richard Mullen Group Manager Product Safety and Compliance Division Power of Attorney July 18, 2012 PSSD-12-F582 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Panasonic Corporation of North America hereby authorizes Nemko AS to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product, which are in compliance with FCC Part 15D. Any and all acts carried out by Nemko AS on our behalf shall have the same effects as acts of our own for a period of one year from the date of this letter. Type Filing: Original Application for DECT Door Camera, Model VL-CM851A 1 Equipment Classification: Part 15 Unlicensed PCS Base Station (PUB) FCC ID Door Camera: ACJ96NVL-CM851A FCC Rule Part: FCC Part 15, Subpart D Frequency Range: 1921.536 ~ 1928.448 MHz RF Output Power: 0.093 Watts Power Supply: Internal Four Alkaline AA Primary Batteries, Type LR6 Responsible Panasonic Corporation of North America Applicant & Grantee: One Panasonic Way, Secaucus, NJ 07094 FRN Number: 0003762242 Responsible Manufacturer: Panasonic System Networks Co., Ltd. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division 1 The subject DECT Door Camera will be marketed with DECT Main Station and DECT Monitor Station, which will be FCC Part 15D certified under FCC IDs: ACJ96NVL-DM200A and ACJ96NVL-DM200A. Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] Richard Mullen Group Manager Product Safety and Compliance Division Request for Confidentiality July 18, 2012 PSSD-12-F582 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Type Filing: Original Application for DECT Door Camera, Model VL-CM851A Product Classification: Part 15 Unlicensed PCS Base Station (PUB) FCC ID Door Camera: ACJ96NVL-CM851A In accordance with provisions of Sections 0.457 and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain: (1) Antenna Construction; (2) Description of Electrical Circuitry; (3) Schematic Diagrams of Handset Unit and RF Unit; and (4) Block Diagram. The transmitter is not user adjustable and does not have a Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection. In accordance with FCC Public DA 04-1705, we request forty-five day short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain: (1) External Photographs of Handset Unit and RF Unit; (2) Internal Photographs of Handset Unit and RF Unit; (3) Test Setup Photographs; and (4) User Manual. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division

PSSD-12-F580 / DECT Main under FCC ID: ACJ96NVL-MDM200A PSSD-12-F581 / DECT Monitor under FCC ID: ACJ96NVL-DM200A PSSD-12-F582 / DECT Camera under FCC ID: ACJ96NVL-CM851A FCC Part 15D – Compliance Information pssd-12-f580, -f581, -f582 (fcc part 15d declaration compliance information).doc 6-Feb-2012 page 1 (5) rev.1.5 EUT AND PRODUCT INFORMATION Type of Equipment UPCS (DECT 6.0) Applicant Name Panasonic Corporation of North America Address One Panasonic Way, Secaucus, NJ 07094, USA Contact Richard Mullen Door Camera (PP) Monitor Unit (PP) Main Station (FP) EUT Type/System FCC ID ACJ96NVL-CM851A ACJ96NVL-DM200A ACJ96NVL-MDM200A Industry Canada ID IC:216A-VLCM851A IC:216A-VLDM200A IC:216A-VLMDM200A Model name VL-CM851A VL-DM200A VL-MDM200A HW Version PNLB1993xx PNLB1994xx PNLB1996xx SW Version Ver.006 Ver.004 Ver.004 Max antenna Gain 2.14dBi 2.14dBi Antenna1:2.14dBi Antenna2:2.14dBi Can the EUT be Initiating Device YES YES YES Does the EUT transmit signaling channels YES YES YES Max number of slots in use simultaneously 6 slot 3 slot 6 slot Test standard: FCC part 15D RSS-213, Issue 2 / RSS-GEN, Issue 3 Frequency Band 1921.536 – 1928.448 MHz # of RF Channels 5 Frame Period 10 ms Max. Burst length 723us / duplex channel Min. Burst Length 106us / signaling channel # of System Channels 60 (12 duplex channels per RF carrier) Operating Mode Simplex Duplex PSSD-12-F580 / DECT Main under FCC ID: ACJ96NVL-MDM200A PSSD-12-F581 / DECT Monitor under FCC ID: ACJ96NVL-DM200A PSSD-12-F582 / DECT Camera under FCC ID: ACJ96NVL-CM851A FCC Part 15D – Compliance Information pssd-12-f580, -f581, -f582 (fcc part 15d declaration compliance information).doc 6-Feb-2012 page 2 (5) rev.1.5 ANTENNAS Antenna Type Internal External 1 Wired Antenna 2 Wired Antenna 3 4 Main Station (FP) Does RX and TX use the same antenna(s)? Yes No Antenna Type Internal External 1 Wired Antenna 2 Door Camera (PP) Does RX and TX use the same antenna(s)? Yes No Antenna Type Internal External 1 Pattern Antenna 2 Monitor Unit (PP) Does RX and TX use the same antenna(s)? Yes No ANTENNA DIVERSITY Diversity Supported Antenna TX RX 1 2 3 Main Station (FP) 4 1 Door Camera (PP) 2 1 Monitor Unit (PP) 2 PSSD-12-F580 / DECT Main under FCC ID: ACJ96NVL-MDM200A PSSD-12-F581 / DECT Monitor under FCC ID: ACJ96NVL-DM200A PSSD-12-F582 / DECT Camera under FCC ID: ACJ96NVL-CM851A FCC Part 15D – Compliance Information pssd-12-f580, -f581, -f582 (fcc part 15d declaration compliance information).doc 6-Feb-2012 page 3 (5) rev.1.5 VOLTAGE AND TEMPERATURE RANGES VOLTAGES Door Camera (PP) Monitor Unit (PP) Main Station (FP) Nominal Voltage DC 3V DC 3.7V 120V AC Cut-Off Voltage (if applicable) - - - POWER SOURCE Type Manufacturer Main Station (FP) Switching Power Supply Panasonic Door Camera (PP) 4 Alkaline AA (LR6) batteries various Monitor Unit (PP) Lithium-ion rechargeable battery Panasonic Data Connections PSTN Others (please specify) .... PSSD-12-F580 / DECT Main under FCC ID: ACJ96NVL-MDM200A PSSD-12-F581 / DECT Monitor under FCC ID: ACJ96NVL-DM200A PSSD-12-F582 / DECT Camera under FCC ID: ACJ96NVL-CM851A FCC Part 15D – Compliance Information pssd-12-f580, -f581, -f582 (fcc part 15d declaration compliance information).doc 6-Feb-2012 page 4 (5) rev.1.5 ANCILLARY EQUIPMENT Description Type Manufacturer HOST DEVICE Description Type Manufacturer ADDITIONAL INFORMATION PSSD-12-F580 / DECT Main under FCC ID: ACJ96NVL-MDM200A PSSD-12-F581 / DECT Monitor under FCC ID: ACJ96NVL-DM200A PSSD-12-F582 / DECT Camera under FCC ID: ACJ96NVL-CM851A FCC Part 15D – Compliance Information pssd-12-f580, -f581, -f582 (fcc part 15d declaration compliance information).doc 6-Feb-2012 page 5 (5) rev.1.5 MANUFACTURERS DECLARATIONS FCC part 15.323 (c)(5) The applicant declares that the system in this application has more than 40 duplex system access channels defined, and that the system is operating in Least Interfered Channel (LIC) mode in accordance with this section. Applicant Agrees Yes No FCC part 15.323 (c)(5) No device or group of co-operating devices located within 1m of each other shall during any frame period occupy more than 6 MHz of aggregate bandwidth, or alternatively, more than one third of the time and spectrum windows defined by the system. Applicant Agrees Yes No FCC part 15.323 (c)(10) The applicant hereby declares that the system in this application does use the criteria of (c)(10) of this section. Applicant Agrees Yes No FCC part 15.323 (c)(11) The applicant hereby declares that system in this application does not use the criteria of (c)(11) of this section. Applicant Agrees Yes No FCC part 15.323 (c)(12) The provisions of (c)(10) or (c)(11) of this section shall not be used to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. Applicant Agrees Yes No FCC part 15.307 (b) The Applicant is a participating member of UTAM, Inc. and will provide an affidavit from UTAM, Inc. certifying this. Confirmed By Applicant Yes No ADDITIONAL REMARKS: > DECLARED BY: June 8, 2012 Richard Mullen Richard Mullen

EXTERNAL PHOTOGRAPHS VL-CM851A Rear View

EXHIBIT B MARKINGS Door Camera: FCC ID: Below marking is shown on the bottom of the unit. FCC 15 statement: Below statement is shown on the user manual of the unit. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

INTERNAL PHOTOGRAPHS Internal View Main Board RF Portion Shield cover removed

FCC ID: ACJ96NVL-CM851A MPE Calculation for FCC Uncontrolled Environment Formula from page 18 of OET Bulletin 65, Edition 97 -01 where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of i nterest relative to an isotropic radiator R = distance to the center of radiation of the ante nna Source Based Time Averaged Duty Cycle is 100% in ca lculation below Maximum peak output power at antenna input terminal : 19.70 (dBm) Maximum peak output power at antenna input terminal : 0.093 (W) Maximum antenna gain: 1.70 (dBi) Maximum antenna gain: 1.479 (numeric) Prediction distance: 20 (cm) Prediction frequency: 1925 (MHz) Time Averaged Duty Cycle 100 % MPE limit for uncontrolled exposure at prediction f requency: 10.00 (W/m^2) Power density at prediction frequency: 0.0275 (mW/cm^2) Power density at prediction frequency: 0.275 (W/m^2) Maximum allowable antenna gain: 17.31 (dBi) Margin of Compliance: 15.61 (dB) 2 4 R PG S π =

Nemko AS, Gaustadalléen 30, P.O.Box 73 Blindern, NO-0314 Oslo Norway T +47 22 96 03 30 F +47 22 96 05 50 Enterprise number NO974404532 Visiting address: Nemko Kjeller, Instituttveien 6, P.O.Box 96, NO-2027 Kjeller Norway T +47 64 84 57 00 F +47 64 84 57 05 Test report no. : 210879-2 Item tested : VL-CM851A Type of equipment : UPCS Wireless Door Camera FCC ID : ACJ96NVL-CM851A Client : Panasonic Corporation of North America FCC Part 15, subpart D Isochronous UPCS Device 1920 - 1930 MHz Industry Canada RSS-213, Issue 2 2 GHz Licence-exempt Personal Communications Service Devices (LE-PCS) 12 July 2012 Authorized by : .............................................. G. Suhanthakumar Technical Verificator TEST REPORT FCC part 15D Report no.: 210879-2 FCC ID: ACJ96NVL-CM851A Nemko AS, N-2007 Kjeller Page 2 (48) CONTENTS 1 GENERAL INFORMATION ............................................................................................................... 3 1.1 Testhouse Info ................................................................................................................................... 3 1.2 Client Information .............................................................................................................................. 3 1.3 Responsible Manufacturer (if other than client) ................................................................................. 3 2 TEST INFORMATION ....................................................................................................................... 4 2.1 Tested Item........................................................................................................................................ 4 2.2 Description of Tested Device ............................................................................................................. 4 2.3 Exposure Evaluation .......................................................................................................................... 4 2.4 Test Environment .............................................................................................................................. 5 2.5 Test Period ........................................................................................................................................ 5 2.6 Test Engineer(s) ................................................................................................................................ 5 2.7 Test Equipment ................................................................................................................................. 5 2.8 Other Comments ............................................................................................................................... 5 3 TEST REPORT SUMMARY .............................................................................................................. 6 3.1 General .............................................................................................................................................. 6 3.2 Test Summary ................................................................................................................................... 7 4 TEST RESULTS ................................................................................................................................ 8 4.1 Coordination with fixed microwave .................................................................................................... 8 4.2 Digital Modulation Techniques .......................................................................................................... 8 4.3 Labeling Requirements ..................................................................................................................... 8 4.4 Antenna Requirement........................................................................................................................ 9 4.5 Channel Frequencies ........................................................................................................................ 9 4.6 Automatic Discontinuation of Transmission .................................................................................... 10 4.7 Peak Power Output ......................................................................................................................... 11 4.8 Emission Bandwidth B ..................................................................................................................... 16 4.9 Power Spectral Density ................................................................................................................... 19 4.10 In-Band Unwanted Emissions, Conducted ...................................................................................... 22 4.11 Out-of-band Emissions, Conducted................................................................................................. 24 4.12 Carrier Frequency Stability .............................................................................................................. 28 4.13 Frame Repetition Stability ............................................................................................................... 29 4.14 Frame Period and Jitter ................................................................................................................... 29 4.15 Monitoring Threshold, Least Interfered Channel ............................................................................. 31 4.16 Threshold Monitoring Bandwidth ..................................................................................................... 33 4.17 Reaction Time and Monitoring Interval ............................................................................................ 34 4.18 Time and Spectrum Window Access Procedure ............................................................................. 36 4.19 Acknowledgements and Transmission Duration ..................................................................…

Text truncated - open the document above for the full version.

FCC ID: ACJ96NVL-CM851A Project no.: 210879 Page 1 of 1 PHOTOS OF TEST SET-UP Power-line Conducted Emissions Test