ACJ96NVL-DM100ADECT Monitor Station for Wireless Door Camera System, Model VL-SDM100A

VL-CM850A VL-DM100A Operating Instructions Model No.VL-SDM100A Including: VL-DM100A VL-CM850A Wireless Door Camera Thank you for purchasing a Panasonic product. Please read this manual before using the unit and save for future reference. Introduction Product descriptions ...........................................3 Accessory information ........................................3 Important Information For your safety ....................................................5 Important safety instructions ...............................6 For best performance .........................................7 Other information ................................................8 Getting Started Location of controls .............................................9 Monitor display ..................................................11 Attaching the Wireless Camera ........................13 How to use Monitoring the outside ......................................19 Programming function settings .........................21 Useful Information Replacing batteries ...........................................22 Cleaning ............................................................22 Help Troubleshooting ................................................23 Error messages ................................................25 General Information Specifications ....................................................26 For users in the United States Only (FCC and other information) .......................................................28 For users in Canada Only (Industry Canada Notices and other information) ..........................29 Quick Reference Guide (in Spanish) Quick Reference Guide (in Spanish) ................30 Appendix Customer services (For United States) .............33 Warranty (For United States) ............................34 Warranty (For Canada) .....................................36 Index Index..................................................................38 2 Table of Contents Product descriptions Product figure VL-CM850A *1 VL-DM100A *2 Description in this manual Wireless CameraMonitorCradle *1 The Wireless Camera is used by attaching it to the front door of a house or apartment (page 13). *2 With the Monitor you can easily check your front door with images from the Wireless Camera. *3 The Cradle is used to hold the Monitor, see page 11. Accessory information Supplied accessories A Double-sided tape *1 ... ́ 1 B Hex key *1 ... ́ 1 C Screws *1 ... ́ 2 D Cradle *2 ... ́ 1 E Operating Instructions *3 ... ́ 1 *1 Used for the Wireless Camera and for installation. *2 Used for the Monitor. *3 Containing English Operating Instructions, French Operating Instructions, and Spanish Quick Reference Guide. Note: RDesign and specifications are subject to change without notice. RThe illustrations in these instructions may vary slightly from the actual product. License: RPortions of this software are based in part on the work of the Independent JPEG Group. Trademarks: RAll other trademarks identified herein are property of their respective owners. 3 Introduction This product is not designed to be used to prevent theft or intrusions. Panasonic assumes no liability for any accidents or damages occurring in such cases. 4 Introduction For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection RUse only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. RDo not overload power outlets and extension cords. This can result in the risk of fire or electric shock. RCompletely insert the power plug into the power outlet. Failure to do so may cause electric shock and/ or excessive heat resulting in a fire. RRegularly remove any dust, etc. from the power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. RIf the unit emits smoke or an abnormal smell, or makes an unusual noise, immediately unplug the power plug from the power outlet. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center. RNever touch the plug with wet hands. Danger of electric shock exists. Installation RDo not use the unit in areas that are exposed to rain, moisture, steam, or oily smoke, or areas that have excessive dust. This may cause fire or electric shock. RDo not install or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. RDo not perform any actions (such as damaging, altering, exposing to heat sources, or placing heavy objects on the electrical parts and the power plug) that may damage the electrical parts and the power plug. Using the unit with damaged electrical parts or a damaged power plug may cause electric shock, short circuits, or fire. Contact an authorized service center for repairs. Operating safeguards RTo reduce the risk of electric shock, do not disassemble this unit. Refer servicing to an authorized service center when service is required. Opening covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the unit is subsequently used. RDo not touch the Monitor, electrical parts, or the power plug during an electrical storm. There may be a remote risk of electric shock from lightning. RNever spill any liquids on the unit or get the unit wet in any way. This may cause fire, electric shock, or injury. If the unit becomes wet, immediately unplug the power plug from the power outlet and refer servicing to an authorized service center. RNever spill any liquids on the electrical parts or power plug, or get the electrical parts or power plug wet in any…

Text truncated - open the document above for the full version.

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] Richard Mullen Group Manager Product Safety and Compliance Division Power of Attorney July 18, 2012 PSSD-12-F583 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Panasonic Corporation of North America hereby authorizes Nemko AS to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product, which are in compliance with FCC Part 15D. Any and all acts carried out by Nemko AS on our behalf shall have the same effects as acts of our own for a period of one year from the date of this letter. Type Filing: Original Application for DECT Monitor Station, Model VL-DM100A 1 Equipment Classification: Part 15 Unlicensed PCS Base Station (PUB) FCC ID Monitor Station: ACJ96NVL-DM100A FCC Rule Part: FCC Part 15, Subpart D Frequency Range: 1921.536 ~ 1928.448 MHz RF Output Power: 0.079 Watts Power Supply: Direct Plug-In AC Adaptor, Model VL-MDM100HP, which has DC output cable and is hard-wired connected to Main Station, which contains switching power supply at 75 kHz Responsible Panasonic Corporation of North America Applicant & Grantee: One Panasonic Way, Secaucus, NJ 07094 FRN Number: 0003762242 Responsible Manufacturer: Panasonic System Networks Co., Ltd. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division 1 The subject DECT Monitor Station will be marketed with DECT Main Station and DECT Door Camera, which will be FCC Part 15D certified under FCC IDs: ACJ96NVL-DM200A and ACJ96NVL-CM850A. Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] Richard Mullen Group Manager Product Safety and Compliance Division Request for Confidentiality July 18, 2012 PSSD-12-F583 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Type Filing: Original Application for DECT Monitor Station, Model VL-DM100A Product Classification: Part 15 Unlicensed PCS Base Station (PUB) FCC ID Monitor Station: ACJ96NVL-DM100A In accordance with provisions of Sections 0.457 and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain: (1) Antenna Construction; (2) Description of Electrical Circuitry; (3) Schematic Diagrams of Handset Unit and RF Unit; and (4) Block Diagram. The transmitter is not user adjustable and does not have a Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection. In accordance with FCC Public DA 04-1705, we request forty-five day short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain: (1) External Photographs of Handset Unit and RF Unit; (2) Internal Photographs of Handset Unit and RF Unit; (3) Test Setup Photographs; and (4) User Manual. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division

PSSD-12-F583 / DECT Monitor under FCC ID: ACJ96NVL-DM100A PSSD-12-F584 / DECT Camera under FCC ID: ACJ96NVL-CM850A FCC Part 15D – Compliance Information pssd-12-f583, -f584 (fcc part 15d declaration compliance information).doc 6-Feb-2012 page 1 (4) rev.1.5 EUT AND PRODUCT INFORMATION Type of Equipment UPCS (DECT 6.0) Applicant Name Panasonic Corporation of North America Address One Panasonic Way, Secaucus, NJ 07094, USA Contact Richard Mullen Camera (PP) Monitor Station (FP) EUT Type/System FCC ID ACJ96NVL-CM850A ACJ96NVL-DM100A Industry Canada ID IC:216A-VLCM850A IC:216A-VLDM100A Model name VL-CM850A VL-DM100A HW Version PNLB1993xx PNLB1994xx SW Version Ver.006 Ver.004 Max antenna Gain 2.14dBi 2.14dBi Can the EUT be Initiating Device YES YES Does the EUT transmit signaling channels YES YES Max number of slots in use simultaneously 3 slot 3 slot Test standard: FCC part 15D RSS-213, Issue 2 / RSS-GEN, Issue 3 Frequency Band 1921.536 – 1928.448 MHz # of RF Channels 5 Frame Period 10 ms Max. Burst length 723us / duplex channel Min. Burst Length 106us / signaling channel # of System Channels 60 (12 duplex channels per RF carrier) Operating Mode Simplex Duplex PSSD-12-F583 / DECT Monitor under FCC ID: ACJ96NVL-DM100A PSSD-12-F584 / DECT Camera under FCC ID: ACJ96NVL-CM850A FCC Part 15D – Compliance Information pssd-12-f583, -f584 (fcc part 15d declaration compliance information).doc 6-Feb-2012 page 2 (4) rev.1.5 ANTENNAS Antenna Type Internal External 1 Wired Antenna 2 3 4 Monitor Station (FP) Does RX and TX use the same antenna(s)? Yes No Antenna Type Internal External 1 Wired Antenna 2 Door Camera (PP) Does RX and TX use the same antenna(s)? Yes No ANTENNA DIVERSITY Diversity Supported Antenna TX RX 1 2 3 Monitor Station (FP) 4 1 Door Camera (PP) 2 VOLTAGE AND TEMPERATURE RANGES VOLTAGES Door Camera (PP) Monitor Station (FP) Nominal Voltage DC 3V 120V AC Cut-Off Voltage (if applicable) - - - POWER SOURCE Type Manufacturer Door Camera (FP) 4 Alkaline AA (LR6) batteries various Monitor Unit (PP) Switching Power Supply Panasonic Data Connections PSTN Others (please specify) .... PSSD-12-F583 / DECT Monitor under FCC ID: ACJ96NVL-DM100A PSSD-12-F584 / DECT Camera under FCC ID: ACJ96NVL-CM850A FCC Part 15D – Compliance Information pssd-12-f583, -f584 (fcc part 15d declaration compliance information).doc 6-Feb-2012 page 3 (4) rev.1.5 ANCILLARY EQUIPMENT Description Type Manufacturer HOST DEVICE Description Type Manufacturer ADDITIONAL INFORMATION PSSD-12-F583 / DECT Monitor under FCC ID: ACJ96NVL-DM100A PSSD-12-F584 / DECT Camera under FCC ID: ACJ96NVL-CM850A FCC Part 15D – Compliance Information pssd-12-f583, -f584 (fcc part 15d declaration compliance information).doc 6-Feb-2012 page 4 (4) rev.1.5 MANUFACTURERS DECLARATIONS FCC part 15.323 (c)(5) The applicant declares that the system in this application has more than 40 duplex system access channels defined, and that the system is operating in Least Interfered Channel (LIC) mode in accordance with this section. Applicant Agrees Yes No FCC part 15.323 (c)(5) No device or group of co-operating devices located within 1m of each other shall during any frame period occupy more than 6 MHz of aggregate bandwidth, or alternatively, more than one third of the time and spectrum windows defined by the system. Applicant Agrees Yes No FCC part 15.323 (c)(10) The applicant hereby declares that the system in this application does use the criteria of (c)(10) of this section. Applicant Agrees Yes No FCC part 15.323 (c)(11) The applicant hereby declares that system in this application does not use the criteria of (c)(11) of this section. Applicant Agrees Yes No FCC part 15.323 (c)(12) The provisions of (c)(10) or (c)(11) of this section shall not be used to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. Applicant Agrees Yes No FCC part 15.307 (b) The Applicant is a participating member of UTAM, Inc. and will provide an affidavit from UTAM, Inc. certifying this. Confirmed By Applicant Yes No ADDITIONAL REMARKS: > DECLARED BY: June 8, 2012 Richard Mullen Richard Mullen

EXTERNAL PHOTOGRAPHS VL-DM100A Rear View

EXHIBIT B MARKINGS Monitor Station: The monitor station provides with the following marking, or equivalent. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: Above markings are shown on the power supply unit.

INTERNAL PHOTOGRAPHS Internal View Main Board RF Portion Shield cover removed Back Side

FCC ID: ACJ96NVL-DM100A MPE Calculation for FCC Uncontrolled Environment Formula from page 18 of OET Bulletin 65, Edition 97 -01 where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of i nterest relative to an isotropic radiator R = distance to the center of radiation of the ante nna Source Based Time Averaged Duty Cycle is 100% in ca lculation below Maximum peak output power at antenna input terminal : 19.00 (dBm) Maximum peak output power at antenna input terminal : 0.079 (W) Maximum antenna gain: 4.20 (dBi) Maximum antenna gain: 2.630 (numeric) Prediction distance: 20 (cm) Prediction frequency: 1925 (MHz) Time Averaged Duty Cycle 100 % MPE limit for uncontrolled exposure at prediction f requency: 10.00 (W/m^2) Power density at prediction frequency: 0.0416 (mW/cm^2) Power density at prediction frequency: 0.416 (W/m^2) Maximum allowable antenna gain: 18.01 (dBi) Margin of Compliance: 13.81 (dB) 2 4 R PG S π =

FCC ID: ACJ96NVL-DM100A Project no.: 210879 Page 1 of 1 PHOTOS OF TEST SET-UP Power-line Conducted Emissions Test