ACJ9TGCF-513CF-51mk3 with BT and WLAN(a+b+g)

This manual contains supplementary instructions regarding the use of the computer. It explains the cases where the operation of the computer differs from that in the Operating Instructions. Your computer is equipped with Wireless LAN enabling you to communicate using radio frequencies. Supplementary Instructions for Wireless LAN FCC Radio Frequency Interference Requirements This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or damage this product. Specifications Data transfer rates Standards supported Transmission method Wireless channels used RF frequency band IEEE802.11a: 54/48/36/24/18/12/9/6Mbps (automatically switched) IEEE802.11g: 54/48/36/24/18/12/9/6Mbps (automatically switched) IEEE802.11b: 11/5.5/2/1 Mbps IEEE802.11a/IEEE802.11g/IEEE802.11b OFDM system, DSSS system IEEE802.11a: Channels 36 to 64, 149 to 165 IEEE802.11b/IEEE802.11g: Channels 1 to 11 IEEE802.11a: 5.18~5.32GHz, 5.745~5.825GHz IEEE802.11g/IEEE802.11b: 2412~2462MHz 3 Wireless LAN If you use a wireless LAN, you can use a network without cable connections. CAUTIONz Communication is performed through the wireless LAN antenna. Do not block the antenna area with your hand or otherwise interfere with the passage of the radio signals. NOTEz The communication speeds and distances differ depending on the devices that support the wireless LAN, the installation environment and other ambient conditions. z One characteristic of radio waves is that th eir transmission rate tends to drop as the communication distance increases. It is recommended that the devices supporting the wireless LAN be used in close vicinity to each other. z The rate may drop while a microwave oven is being used. Windows XP z Do not use the Fast User Switching function. „ Do not use wireless LAN on airpl anes, in hospitals, or in other locations where wireless LAN signa ls may affect the operation of devices in the vicinity. z If you intend to use the computer in the environments described above, turn the wireless LAN off using the following method: 1 Double-click or on the taskbar. 2 Select your wireless LAN adaptor and select [General]. 3 Select [Off] for [Switch radio]. 4 Select [OK].The icon will turn to . Precautions 4 Wireless LAN „ To prevent theft of dat a or unauthorized access to the hard disk via a wireless LAN. z If you plan to use wireless LAN functions, we recommend that you do so only after making the appropriate security settings, such as for data encryption. „ We recommend turning the wireless LAN off when it is not used or out of range. z If you leave the wireless LAN on, the battery's operating time is shortened. To use the wireless LAN, set the profile using the following procedure.The settings will vary for diff erent network environments de pending on the network system being used. For more details, a sk your system administrator or the person in charge of the network. CAUTIONz Set profiles for each user using the following procedure. NOTE Windows XP z If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless LAN adaptor.] is displayed, select [Yes]. Windows 2000 z After setting the profile, delete the profile displayed at the time of purchase (profile name: Default). 1 Double-click on the taskbar. 2 Select your wireless LAN adap ter and select [General]. 3 Select [On] for [Switch radio]. The Settings 5 Wireless LAN 4 Select [Networks] and select [Add]. 5 Enter the profile name and network name (SSID), and then make other necessary changes, then select [Next]. 6 Make necessary changes and select [Finish]. 7 Select [OK]. NOTEz About WLAN Security ClientWLAN Security Client is an implementation of the client side of the IEEE 802.1X-Port Based Network Access Control protocol. • Since the WLAN Security Client has alre ady started when is displayed on the taskbar, do not double-start it. If is not displayed, start up the WLAN Security Client in the following menu.Windows XP Select [Start] - [All Programs] - [Int el] - [WLAN Security Client Manager]. Windows 2000Select [Start] - [Programs] - [Intel] - [WLAN Security Client Manager]. • For more information about how to use the WLAN Security Client, refer to [Help] in the menu bar or;Windows XP Select [Getting Started Guide] or [User's Guide] in [Start] - [All Programs] - [Intel].Windows 2000Select [Getting Started Guide] or [User's Guide] in [Start] - [Programs] - [Intel]. Select or on the taskbar to check the communication status.For more information about how to use the Intel PROSet, refer to [Help] in the menu bar. Check the Communication Status 6 Wireless LAN If the function fails to operate correctly Read the operating instructions for the access point carefully and check the settings.„ The access point fails to be displayed in [Available Networks] z Select the profile you are using, and select [Advanced] in [Networks]. [Connect to ad hoc networks only] may have been selected in [Connection preference]. In this case, select [Connect to infrastructure and ad hoc networks]. z This computer uses channels 1 through 11 *1 . Check the channel being used. *1 In the case of wireless communications, the frequency band being used can be divided into segments, so that different communications can be conducted on each band segment. A "Channel" refers to the individual frequency bandwidth divisions. „ The access point cannot be accessed z The network key setting may not conform to the access point.Check the network key setting of the access point and, if necessary, set it again correctly. z Depending on the access point and settings, access may not be accepted unless the computer's MAC address is registered b…

Text truncated - open the document above for the full version.

Please read these instructions carefully before using this product and save this manual for future use. Contents Getting Started Operation Troubleshooting Getting Started Operation Troubleshooting Appendix Appendix XP Read Me First ........................................................ 3 Names and Functions of Parts.............................. 7 First-time Operation ............................................... 9 Starting Up/Shutting Down .................................. 13 Touch Pad ........................................................... 16 Reference Manual ............................................... 17 Useful Information................................................ 18 List of Error Codes ............................................... 23 Dealing with Problems (Summary) ...................... 24 Reinstalling Software ........................................... 28 LIMITED USE LICENSE AGREEMENT .............. 30 Hard Disk Data Erase Utility ................................ 31 Specifications....................................................... 32 LIMITED WARRANTY ......................................... 35 OPERATING INSTRUCTIONS Personal Computer Model No. CF-51 series [Additional Manual] Reference Manual This manual can be accessed on your computer. Refer to “Reference Manual” on how to access the Reference Manual. (Îpage 17) 2 * 1 For the Model No., insert the 12 digit number (for example, CF-51LCMDDBM) located on the bottom of the computer. Introduction Thank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your new computer. Illustrations and Terminology in this Manual zSome of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanation easier to understand. zIf the user has logged on without the administrator authority, some functions may not be executable, and some screens may be not displayed as shown in this manual. If this happens, log on with the administrator authority to enable these functions. zConfirm the latest information on optional products in catalogs, etc. zIn this manual, “Microsoft ® Windows ® XP Professional Service Pack 2 with Advanced Security Technologies” is indicated as “Windows” or “Windows XP”. zIn this manual, the following software packages are described as follows: “WinDVD™ 5 (OEM Version)” as “WinDVD” “B’s Recorder GOLD7 BASIC” as “B’s Recorder” “B’s CLiP 6” as “B’s CLiP” zThe following drives may be described as “CD/DVD drive”. DVD-ROM & CD-R/RW drive, DVD MULTI drive zCircular media such as DVD-ROM and CD-ROM are described as “discs”. Copyright This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be repro- duced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd. No patent liability is assumed with respect to the use of the information contained herein. © 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Disclaimer Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals. Trademarks Microsoft ® , Windows ® and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other countries. PS/2 ® is a registered trademark of International Business Machines Corporation. Intel, Pentium and PROSet are either registered trademarks or trademarks of Intel Corporation. Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. WinDVD™ is a trademark of InterVideo, Inc. Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own compa- nies. NOTENOTE provides a useful fact or helpful information. CAUTIONCAUTION indicates a condition that may result in minor or moderate injury. Enter This illustration means to press the [Enter] key. Fn + F5This illustration means to press and hold the [Fn] key, then press the [F5] key. [start] - [Run]This illustration means to click [start], then to click [Run]. For some applications, you may need to double-click. Î or ⇒These symbols indicated related pages. Î : Refer to the page in this Operating Instructions ⇒ : Refer to the Reference Manual Customer’s Record Model No.* 1 Serial No. or Code No. Date of Purchase Dealer’s Name Dealer’s Address 3 Getting Started Read Me First Federal Communications Commission Radio Fre- quency Interference Statement Note: This equipment has been tested and found to com- ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equip- ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: zReorient or relocate the receiving antenna. zIncrease the separation between the equipment and receiver. zConnect the equipment into an outlet on a circuit differ- ent from that to which the receiver is connected. zConsult the Panasonic Service Center or an experi- enced radio/TV technician for help. Warning To assure continued compliance, use only shielded inter- fac…

Text truncated - open the document above for the full version.

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201.348.7758 / Fax: 201.392.4564 [email protected] RICHARD MULLEN Group Manager Product Safety and Compliance Division November 28, 2005 ITPD-05-F036A: Taiyo BT Part 15C / DSS / EA441434 ITPD-05-F036B: Intel WLAN Part 15C / DTS / EA884566 ITPD-05-F036C: Intel WLAN Part 15E / NII / EA149458 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Authority to Act as FCC Agent and Request for Confidentiality Panasonic Portable Notebook Computer Model CF-51mk3 Family with BT and WLAN / FCC Certification for FCC ID: ACJ9TGCF-513 To Whom It May Concern: On behalf of Panasonic Corporation of North America, we herby authorize PCTEST Engineering Laboratory, Inc., to act on our behalf in matters relating to FCC equipment authorization, including the signing of documents relating to these matters. Any and all acts carried out by PCTEST on our behalf shall have the same effect as acts of our own. In accordance with provisions of Section 0.457(d) of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request confidentiality for both BT and WLAN transmitter exhibits for Operation Description, Block Diagram(s) and Schematic Diagram(s). These transmitters are not user adjustable and are not provided with Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection. This filing represents Portable Notebook Computer Model CF-51mk3 Family with CPU type Pentium-M-2.0 GHz marketed under FCC ID: ACJ9TGCF-513. This product will be marketed with: (1) Taiyo Yuden Bluetooth, Model EYSF1CSMX with Part 15C operation within 2402~2480 at 60 mW peak conducted RF output power; and (2) Intel WLAN (802.11a+b+g) Module, Model WM3945ABG with Part 15C operation within 2412~2462 and 5745~5825 MHz at 71.45 mW and 85.11 mW peak conducted RF output power; and Part 15E operation within 5180~5240 and 5260~5320 MHz at 42.25 mW and 90.78 mW peak conducted RF output. The maximum worse-case measured SAR value was 0.644 W/kg for WLAN (802.11a, Bystander) at 5260 MHz at 1.5 cm auxiliary antenna spacing. This PC’s keyboard contains the following Inverted F type antennas: (1) BT with 4.33 dBi antenna gain; (2) WLAN Main TX//RX with 4.97 dBi antenna gain; and (3) WLAN Aux TX/RX with 3.59 dBi antenna gain. This product may be marketed with optional Port Replicator Model CF-VEB511, which does not contain any external antenna connector. The basic User Manual contains all general FCC warning notices, including RF exposure warning notices, which includes notice that PC was approved for portable operation and unless otherwise advised in separate supplemental instructions for individual wireless transmitter(s), requires minimum 1.5 cm spacing. The separate provided WLAN User Manual gives additional warning notice about NII operation. Sincerely yours, Richard Mullen Richard Mullen Group Manager

Panasonic Corporation of America Three Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201.348.7758 / Fax: 201.392.4564 [email protected] RICHARD MULLEN Group Manager Product Safety and Compliance Division January 10, 2006 ITPD-05-F036A: BT Part 15C / DSS / EA441434 ITPD-05-F036B: WLAN Part 15C / DTS / EA884566 ITPD-05-F036C: WLAN Part 15E / NII / EA149458 To: Stanley Lyles / FCC Equipment Authorization Branch Applicant: Panasonic Corporation of North America FCC ID: ACJ9TGCF-513 Corr Ref No: EA441434, EA884566 and EA149458 731 Confirm No: 30255, 30256 and 30257 Date of FCC E-Mail: January 10, 2006 Product Name: Portable Notebook Computer, Model CF-51mk3 Family Dear Mr. Stanley Lyles: We noted your sent FYI regarding on/off SAR testing generally applicable only for P<5mW Bluetooth - depending on device design and operating configurations, future filings may request other info/data for co-transmitting modes. Comment 1: You have requested short-term confidentiality. However, there is no letter exhibit requesting short- term confidentiality. Please submit a signed letter requesting short-term confidentiality. Letter should include a list of exhibits to be marked short-term confidential. Letter should include a brief explanation as to why short-term confidentiality is requested. Answer 1: In accordance with FCC Public DA 04-1705, we request short-term confidentiality for BT and WLAN exhibits for External Photographs, Internal Photographs and Antenna Position Photographs. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Thank you for your attention in this matter. Sincerely yours, Richard Mullen Richard Mullen Group Manager

<CF-51 WLANabg & BlueTooth photo> 1) Front View Front View

<FCC ID & DoC LABEL for CF-51> Rating Plate FCC ID: ACJ9TGCF-513 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID Label Position FCC DoC Position

CF-51mk3 Antenna Position BlueTooth Antenna Position WLAN Aux Antenna Position WLAN Main Antenna Position BT Antenna WLAN AUX Antenna WLAN Main Antenna BlueTooth Module WLAN Module WLAN Main Antenna WLAN AUX Antenna BlueTooth Antenna

2) WLAN Card position 90rotation 3) WLAN exterior photo WLAN Top View WLAN Bottom View FCCID:PD9WM3945ABG 4) WLAN interior photo WLAN inside Top View WLAN inside Bottom View 4) BlueTooth Card position 5) BlueTooth Card exterior photo BlueTooth Card Top View BlueTooth Card Bottom View 6) BlueTooth Module interior photo BlueTooth Module inside Top View BlueTooth Module inside Bottom View FCCID:WM3945ABG 7) WLAN Antenna Position Main TX/RX Antenna Aux TX/RX Antenna 8) WLAN Antenna Position BlueTooth Antenna 9) Antenna Spec WLAN Main TX/RX Antenna: Pattern Antenna(Inverted F type: 4.97dBi max) WLAN Aux TX/RX Antenna: Pattern Antenna(Inverted F type: 3.59dBi max) BlueTooth Antenna: Pattern Antenna(Inverted F type: 4.33dBi max) Note) WLAN Main/Aux antenna is diversity antenna.

Panasonic FCC ID: ACJ9TGCF-513 EUT Photographs © 2005 PCTEST Lab. Notebook PC with 802.11abg WLAN Model: CF-51 mk3 Panasonic FCC ID: ACJ9TGCF-513 EUT Photographs © 2005 PCTEST Lab. Notebook PC with 802.11abg WLAN Model: CF-51 mk3 Panasonic FCC ID: ACJ9TGCF-513 EUT Photographs © 2005 PCTEST Lab. Notebook PC with 802.11abg WLAN Model: CF-51 mk3 Panasonic FCC ID: ACJ9TGCF-513 EUT Photographs © 2005 PCTEST Lab. Notebook PC with 802.11abg WLAN Model: CF-51 mk3 Panasonic FCC ID: ACJ9TGCF-513 EUT Photographs © 2005 PCTEST Lab. Notebook PC with 802.11abg WLAN Model: CF-51 mk3 Panasonic FCC ID: ACJ9TGCF-513 EUT Photographs © 2005 PCTEST Lab. Notebook PC with 802.11abg WLAN Model: CF-51 mk3 Panasonic FCC ID: ACJ9TGCF-513 EUT Photographs © 2005 PCTEST Lab. Notebook PC with 802.11abg WLAN Model: CF-51 mk3 Panasonic FCC ID: ACJ9TGCF-513 EUT Photographs © 2005 PCTEST Lab. Notebook PC with 802.11abg WLAN Model: CF-51 mk3 Panasonic FCC ID: ACJ9TGCF-513 EUT Photographs © 2005 PCTEST Lab. Notebook PC with 802.11abg WLAN Model: CF-51 mk3 Panasonic FCC ID: ACJ9TGCF-513 EUT Photographs © 2005 PCTEST Lab. Notebook PC with 802.11abg WLAN Model: CF-51 mk3 Panasonic FCC ID: ACJ9TGCF-513 EUT Photographs © 2005 PCTEST Lab. Notebook PC with 802.11abg WLAN Model: CF-51 mk3 Panasonic FCC ID: ACJ9TGCF-513 EUT Photographs © 2005 PCTEST Lab. Notebook PC with 802.11abg WLAN Model: CF-51 mk3

PCTEST ENGINEERING LABORATORY, INC. 6660 – B Dobbin Road • Columbia, MD 21045 • USA Telephone 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com (email: [email protected]) CERTIFICATE OF COMPLIANCE (SAR EVALUATION) PCTEST SAR REPORT FCC CERTIFICATION Reviewed by: Quality Manager SAR Filename: 0510260750 Test Dates: November 4-9, 2005 Phone Type: Panasonic Notebook PC w/ WLAN, UNII and Bluetooth FCC ID: ACJ9TGCF-513 Page 1 of 29 © 2005 PCTEST Engineering Laboratory, Inc APPLICANT NAME & ADDRESS: DATE & LOCATION OF TESTING: Panasonic Corporation of North America Dates of Tests: November 4-9, 2005 One Panasonic Way, 4B-8 Test Report S/N: 0510260750 Secaucus, NJ 07094 Test Site: PCTEST Lab, Columbia MD Project No.: ITPD-05-F036A FCC ID: ACJ9TGCF-513 APPLICANT: Matsushita Electric Industrial Co., Ltd. EUT Type: Notebook PC w/ WLAN, EVDO and Bluetooth Tx/Rx Frequency: 2412 – 2462 MHz (DSSS/OFDM) 5180 – 5320 MHz / 5745 – 5825 MHz (OFDM) 2402 - 2480 MHz (FHSS) 17.80 dBm Peak Conducted (2.4 GHz/ FHSS) Max. RF Output Power: 18.54 dBm Peak Conducted (2.4 GHz DSSS/OFDM) 19.30 dBm Peak Conducted (5.8 GHz OFDM) 19.58 dBm Peak Conducted (5.2 GHz OFDM) Max. SAR Measurement: 0.186 W/kg 802.11b Body SAR; 0.186 W/kg 802.11g Body SAR; 0.644 W/kg 802.11a (5300MHz) Body SAR; 0.615 W/kg 802.11a (5800MHz) Body SAR; 0.171 W/kg Bluetooth Body SAR Trade Name/Model(s): CF-51mk3 FCC Classification(s): Digital Transmission System (DTS) Unlicensed National Information Infrastructure (NII) Licensed Portable Transmitter Held to Ear (PCE) FCC Rule Part(s): §2.1093; FCC/OET Bulletin 65 Supplement C [July 2001] Application Type: Certification Test Device Serial No.: identical prototype [S/N: #002] This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE Std. 1528 - 2003. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Grant Conditions: Output power listed is Conducted. SAR compliance for body-worn operating configuration is based on a separation distance of 0.0 cm between the bottom of the unit and the body of the user. End-users must be informed of the body-worn operating configurations for satisfying RF exposure compliance. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. PCTEST SAR REPORT FCC CERTIFICATION Reviewed by: Quality Manager SAR Filename: 0510260750 Test Dates: November 4-9, 2005 Phone Type: Panasonic Notebook PC w/ WLAN, UNII and Bluetooth FCC ID: ACJ9TGCF-513 Page 2 of 29 © 2005 PCTEST Engineering Laboratory, Inc TABLE OF CONTENTS 1. INTRODUCTION / SAR DEFINITION.................................................................................3 2. SAR MEASUREMENT SETUP.............................................................................................4 3. DASY4 E-FIELD PROBE SYSTEM........................................................................................5 4. PROBE CALIBRATION PROCESS.......................................................................................6 5. PHANTOM & EQUIVALENT TISSUES................................................................................7 6. TEST SYSTEM SPECIFICATIONS.........................................................................................8 7. DOSIMETRIC ASSESSMENT & PHANTOM SPECS...............................................................9 8. DEFINITION OF REFERENCE POINTS..............................................................................10 9. TEST CONFIGURATION POSITIONS...............................................................................11 10. ANSI/IEEE C95.1 - 1992 RF EXPOSURE LIMITS.................................................................12 11. MEASUREMENT UNCERTAINTIES 5 GHz Band................................................................13 11. MEASUREMENT UNCERTAINTIES 2.4 GHz Band.............................................................14 12. SYSTEM VERIFICATION..................................................................................................15 13. SAR TEST DATA SUMMARY.......................................................................................16-26 15. SAR TEST EQUIPMENT...................................................................................................27 16. CONCLUSION...............................................................................................................28 17. REFERENCES..................................................................................................................29 PCTEST SAR REPORT FCC CERTIFICATION Reviewed by: Quality Manager SAR Filename: 0510260750 Test Dates: November 4-9, 2005 Phone Type: Panasonic Notebook PC w/ WLAN, UNII and Bluetooth FCC ID: ACJ9TGCF-513 Page 3 of 29 © 2005 PCTEST Engineering Laboratory, Inc 1. INTRODUCTION / SAR DEFINITION The FCC has adopted the guidelines for evaluating the environmental effects of radiofrequency radiation in ET Docket 93-62 on Aug. 6, 1996 to protect the public and workers from the potential hazards of RF emissions due to FCC-regulated portable devices.[1] The safety limits used for the environmental evaluation measurements are based on the criteria published by the American National Standards Institute (ANSI) for localized specific absorption rate (SAR) in IEEE/ANSI C95.1-1992 Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz …

Text truncated - open the document above for the full version.

CONFIDENTIAL PROPERTY OF PCTEST UNLICENSED NATIONAL INFORMATION INFRASTRUCTURE (NII), FCC RULE PART 15.407 PCTEST ENGINEERING LABORATORY, INC. 6660 – B Dobbin Road • Columbia, MD 21045 • USA Telephone 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com (email: [email protected]) CERTIFICATE OF COMPLIANCE MANUFACTURER NAME & ADDRESS: DATE & LOCATION OF TESTING: Panasonic Corporation of North America Date(s) of Tests: November 4-9, 2005 One Panasonic Way, 4B-8 Test Report S/N: 0510260748 Secaucus, NJ 07094 Test Site: PCTEST Lab, Columbia, MD Project Number: ITPD-05-F036A FCC ID: ACJ9TGCF-513 APPLICANT: Panasonic Corporation of North America SUMMARY: Model No.: CF-51mk3 Equipment EUT Type: Notebook PC w/ WLAN, UNII and Bluetooth Max. Output Power: 16.28 dBm (Peak) Conducted (Low Band) 19.58 dBm (Peak) Conducted (High Band) Frequency Range: 5180 – 5240 MHz (Low Band) 5260 – 5320 MHz (High Band) FCC Classification: Unlicensed National Information Infrastructure (NII) FCC Rule Part(s): Parts 15.407; ANSI C-63.4-2001 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C-63.4-2001. If the EUT contains any additional embedded transmitters, then those transmitters were active during all tests. The JBC portion of this EUT is covered in the DOC report. Radiated data was taken with the highest gain antenna. I authorize and attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. CONFIDENTIAL PROPERTY OF PCTEST UNLICENSED NATIONAL INFORMATION INFRASTRUCTURE (NII), FCC RULE PART 15.407 Page i © 2005 PCTEST Engineering Laboratory, Inc. TABLE OF CONTENTS ATTESTATION STATEMENTS.............................................................................................................................1 FCC PART 15 E MEASUREMENT REPORT COVER PAGE................................................................................................2 1.0 INTRODUCTION.......................................................................................................................................................3 1.1 EVALUATION PROCEDURE.......................................................................................................................................................................................................3 1.2 SCOPE................................................................................................................................................................................................................................................3 1.3 PCTEST TEST LOCATION............................................................................................................................................................................................................3 2.0 PRODUCT INFORMATION......................................................................................................................................4 2.1 EQUIPMENT DESCRIPTION........................................................................................................................................................................................................4 2.2 ENCLOSURE....................................................................................................................................................................................................................................4 2.3 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS................................................................................................................................................................4 3.0 DESCRIPTION OF TEST............................................................................................................................................5 3.1 CONDUCT…

Text truncated - open the document above for the full version.