ACJ9TGCF-P11Wireless LAN built in Personal Computer

® Handheld Computer Supplementary Instructions This Supplementary Instructions manual explains how to get started with a wireless LAN and point out cases where the operation of the computer will differ from that in the Operating Instructions. Wireless LAN Antenna Wireless LAN communications are done via an antenna. Do not shield this antenna with the hand, etc. This will negatively effect the performance of your wireless LAN commu- nications. CF-P1 with Wireless LAN NOTE Information to the User This product and your Health This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from de- liberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include: Using this product on board of airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interference caused by unauthorized modi- fication of this product. The correction of interference caused by such unauthorized modifi- cation will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. 2 Supplementary Instructions Read Me First - For U.S.A. Replace as follows. Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip- ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Panasonic Service Center or an experienced radio/TV technician for help. Safety Notice Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate a portable transmitter near unshielded blasting caps or in an explosive environment unless it is type especially qualified for such use. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Matsushita Electric Corporation of America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP-5 (1-800-527-8675) FCC Radiation Exposure Statement: In order to comply with FCC RF exposure limits, it is recommended, when emitting radiated power, that the integrated antenna should not be positioned closer than 2 inches (5 cm) from your body or nearby persons for extended periods of time while it is transmitting (or operat- ing). If the antenna is positioned less than 2 inches (5cm) from the user, it is recommended that user exposure time be limited. 3 First-time Operation After finishing the first-time operation, install the driver for Wireless LAN using the following procedure. Install the driver for Wireless LAN (1)When the computer recognizes the internal Wireless LAN card, a screen will be displayed designating the driver name. Tap to close this screen. (2)Tap [Start]-[Run] in order, then input “ffrestore.exe r”, and then tap [OK]. The driver for Wireless LAN will be copied from the Flash memory to the [Options] folder in [My Computer]. (3)When [Complete] is displayed, press . (4)Install the driver for Wireless LAN. 1) Double-tap [My Computer], and then double-tap the [Options] folder. 2) Double-tap [Wireless LAN]. 3) A screen will be displayed specifying the install destination folder. Tap [OK]. 4) When [Setup Complete] is displayed, tap [OK]. 5) Push the reset switch using the stylus. When the computer is started up and the internal Wireless LAN card is correctly recognized, the [Symbol Status] screen will be displayed. When in…

Text truncated - open the document above for the full version.

Symbol Technologies, Inc. 17 April 2002 Mr. Seiichi Inagaki IT Products Division AVC Company Matushita Electric Industrial Co., Ltd. 1-10-12 Yagumohigashi-machi Moriguchi Osaka Japan 570-0021 RE: Authorization for Panasonic to apply for Regulatory Approvals for Panasonic products that include the Symbol Technologies Inc. radio card Model number LA-4137 Dear Seiichi-san, This letter grants authorization for Panasonic to apply for Regulatory Approvals for Panasonic products that include the Symbol Technologies Inc. radio card: Model number: LA-4137 This letter grants authorization for Panasonic to apply to the Federal Communications Commission, Industry Canada, and other International Regulatory Agencies for a Grant under Panasonic’s Grantee Code or the equivalent, for Panasonic products that include the Symbol Technologies Inc. radio card: Model number: LA-4137 FCC ID: H9PLA4137 Issued: 17 April 02 This letter grants authorization for Panasonic to pursue Test Reports that are for the single purpose of gaining International Regulatory Approvals for Panasonic products that include the Symbol Technologies Inc. radio card: Model number: LA-4137 No other changes or modifications are authorized; all of Symbol Technologies Inc. Regulatory Approvals for the radio card Model number: LA-4137 are to remain in effect and on file. This letter of authorization to remain in effect until notified or 3 years, which ever comes first. Respectfully Marks S. Luksich Senior Manager, Regulatory Symbol Technologies Inc. SYMBOL TECHNOLOGIES LATIN AMERICA, INC. 7900 Glades Road, Suite 600, Boca Raton FL 33434 . (561) 487-1718 . Fax (561) 483-3922

A-PEX INTERNATIONAL CO., LTD. EMC HEAD OFFICE DIVISION 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan TEL:0596-24-8116 / FAX:0596-24-8124 Date: 18 March, 2002 RE: Matsushita FCC ID:ACJ9TGCF-P11 Dear Mr. William H. Graff, Symbol Technology Inc. is now applying their wireless LAN Card (FCC ID: H9PLA4137) to FCC directly and then it will be certified around March 20. As soon as Symbol gets the certification, Matsushita would like to get the certification for their PDA (FCC ID: ACJ9TGCF-P11) with the certified card of Symbol by submitting the following requests at the same time; - Class II Permissive Change under section 2.1043 - Change in Identification Authorization under section 2.933(b) Thank you for your advice. Also, please provide us with your estimate. Kanako Sanda (Ms.) A-Pex International Co., Ltd.

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 April 10, 2002 RE: FCC ID: ACJ9TGCF-P11 I have a few comments on this Application. 1 Please be aware that it is not possible to perform a PC 2 on a non-existent FCC ID. The above ID number does not exist. Nor is it possible to produce a separate ID using a PC2. 2 Please be aware that it is not possible to change the ID number of an existing device without a resubmittal. 2.933(a) “Change in identification of equipment” states, A new application for equipment authorization shall be filed whenever there is a change in the FCC Identifier for the equipment with or without a change in design, circuitry or construction. 3 If you desire to have the FCC ID number above, it will have to be filed as an original equipment authorization. If the device is electrically identical to the referenced FCC ID in your cover letter and there is no change is reported data from the FCC ID mentioned, then in accordance with 2.924 and 2.933 you may submit the following information with a request for original grant. 2.933(b) “An application filed pursuant to paragraph (a) of this section where no change in design, circuitry or construction is involved, need not be accompanied by a resubmission of equipment or measurement or test data customarily required with a new application, unless specifically requested by the Commission. In lieu thereof, the applicant shall attach a statement setting out: (1) The original identification used on the equipment prior to the change in identification. (2) The date of the original grant of the equipment authorization. (3) How the equipment bearing the modified identification differs from the original equipment. (4) Whether the original test results continue to be representative of and applicable to the equipment bearing the changed identification. (5) The photographs required by §2.1033(b)(7) or §2.1033(c)(12) showing the exterior appearance of the equipment, including the operating controls available to the user and the identification label. Photographs of the construction, the component placement on the chassis, and the chassis assembly are not required to be submitted unless specifically requested by the Commission. Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

Subject: Re: FCC ID: ACJ9TGCF-P11 Date: Mon, 15 Apr 2002 10:32:00 +0900 From: [email protected] To: Dennis Ward <[email protected]> CC: William Graff <[email protected]>, [email protected] Dennis, Please let me confirm again. We will take the following procedure for this project; 1) Firstly, Symbol's W-LAN Card is certified by FCC. (We hope this will be able to be certified in near future.) 2) Secondly, you will review Change in FCC ID under 2.933. (As soon as Symbol's W- LAN is certified, I will send the missing information.) 3) Finally, you will review Class II Permissive Change under 2.1043. We believe that Matsushita can get the certification of their FCC ID: ACJ9TGCF-P11 by taking the above steps. Is this understanding right ? Please reply by YES or NO. Best regards, Kanako Sanda 2002/04/13 3:24:24$B!"(BDennis Ward$B$5$s$O!V(BRe: FCC ID: ACJ9TGCF-P11$B!W$G=q$-$^$7(B $B$(B > HI Kanako > I have discussed this device with Bill and we have decided that the best way to proceed is to > wait for the FCC to issue the latest exclusions list. This will eliminate much of the concerns > about the device and make the process much easier. The FCC wants to get this new exclusions > list out before the end of the month. This will still be a much shorter time frame than what the > FCC would take in granting a device like this. > > There are only a couple issues then for this product. Much of which will probably be answered > in the information you say you will be sending. > > Is this is OK with you? > > Thanks > Dennis > > [email protected] wrote: > > > Bill, > > > > As I informed Dennis and you, I understand that Class II Change is allowed > > to existing FCC ID. > > Accordingly, firstly Symbol gives the authorization of change in > > Identification to Matsushita. After getting the certification under 2.933, > > Matsushita wants to get the certification under 2.1043. > > > > In this case, we believe that Matsushita's FCC ID: ACJ9TGCF-P11 should be > > certified. > > > > Please consider it again. > > > > Best regards, > > Kanako Sanda > > > > 2002/04/11 20:37:27?$B!"?(B"William Graff"?$B$5$s$O!V?(BRE: FCC ID: ACJ9TGCF-P11?$B!W$G=q?(B > > ?$B$-$^$7$??(B > > > Kanako, > > > > > > Dennis is right. I may have misunderstood some criticat details. A Class > > > II change will only work on an already existing FCC ID - when a new ID > > > is requested then a whole new Application must be submitted. When you > > > spoke about requesting a new ID this was just automatic in my brain. > > > > > > Bill > > > > > > -----Original Message----- > > > From: [email protected] [mailto:[email protected]] > > > Sent: April 10, 2002 8:39 PM > > > To: Dennis Ward > > > Cc: [email protected] > > > Subject: Re: FCC ID: ACJ9TGCF-P11 > > > > > > > > > > > > Hello Dennis, > > > > > > With reference to your comments, I discussed this project with Bill > > > accurately before uploading this application. > > > > > > Matsushita (Panasonic) wants to get the certifiation of their Personal > > > Computer with W-LAN Card as FCC ID: ACJ9TGCF-P11. The used W-LAN Card is > > > the one of Symbol Technology Inc.. This LAN Card is now applying for the > > > FCC Certification and has not been certified yet. If Matsushita applies > > > for their product as a new FCC ID, they should submit the technical > > > specifications (block and circuit diagrams). However, Symbol Technology > > > never allow to submit these information to the any third party except > > > for FCC even if they are treated as confidentiality. Accordingly, > > > Matsushita decided to be compelled to get their FCC ID ( > > > ACJ9TGCF-P11) by applying to (1) Change in FCC ID and (2) Class II > > > Permissive Change. > > > > > > I have already submitted the relevant documents to you except for Form > > > 731 (for Change in FCC ID), Letter of Specifying Change (for Class II > > > Change), Authorization letter from Symbol Technology (for Change in FCC > > > ID) and Agent letter (for both Change in FCC ID and Class II Change). > > > > > > So, we would like to you review this application for Change in FCC ID > > > firstly and then review it for Class II Permissive Change. > > > > > > For this project, please talk with Bill. > > > > > > Best regards, > > > Kanako Sanda > > > > > > > > > (See attached file: Cover letter.doc) > > > > > > > > > 2002/04/11 7:18:19?$B!"?(BDennis Ward?$B$5$s$O!V?(BFCC ID: ACJ9TGCF-P11?$B!W$G=q$-$^$7?(B > > > ?$B$??(B > > > > Hi Kanako > > > > Please read the attached comments. Basically, the above FCC ID does > > > > not exist and it is not possible to do a PC2 on a non-existant FCC ID. > > > > > > > IT is also not possible to do PC2 and get an ID number changed. Your > > > > > > > device above requires an original grant. I have listed the > > > > information needed. Please upload any necessary information along > > > > with a new 731 requesting an origianal grant for the above. Thanks > > > > Dennis > > > > - 4-10-02 rqst for info ACJ9TGCF-P11.PDF > > > >

A- PEX INTERNATIONAL CO., LTD. EMC HEAD OFFICE DIVISION 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan TEL:0596-24-8116 / FAX:0596-24-8124 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Kanako Sanda (Ms.) A-Pex International Co., Ltd.

Front View of CF-P1 Back View of CF-P1 Top View of CF-P1 Bottom View of CF-P1 Right View of Cf-P1 Left View of CF-P1 External View of CF-P1

Back of AC Adapter Back of AC Adapter

<FCC ID & DoC LABEL for CF-P1> FCC ID: ACJ9TGCF-P11 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID Label PositionFCC DoC Position

Front of Module Back of Module Internal View of CF-P1 DSSS Radio Card (PCMCIA) DSSS Radio Card (PCMCIA) DSSS Radio Card (PCMCIA) DSSS Radio Card (PCMCIA) DSSS Radio Card (PCMCIA) DSSS Radio Card (PCMCIA)

RF Exposure Statement No. : 22FE0029-YW Applicant : Matsushita Electric Industrial Co., Ltd. Type of Equipment : Wireless LAN built-in PC (SYMBOL LAN Card) Model No. : CF-P1 FCC ID : ACJ9TGCF-P11 FCC Radiation Exposure Statement: Matsushita Electric Industrial Co., Ltd Model : CF-P1 complies with FCC radiation exposure requirement specified in the FCC Rules 15.247(b)(4). Notice in Installation Manual FCC Radiation Exposure Statement: In order to comply with FCC RF exposure limits, it is recommended, when emitting radiated power, that the integrated antenna should not be positioned closer than 2 inches (5cm) from your body or nearby persons for extended periods of time while it is transmitting (or operat- ing). If the antenna is positioned less than 2 inches (5cm) from the user, it is recommended that user exposure time be limit. RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provided with the “CF-P1” as calculated from FCC OET 65 Appendix B, Table (B) Limits for General Population / Uncontrolled Exposure. This calculation is based on the highest EIRP possible from the system, considering maximum power and antenna gain, and considering a 1.0m W/cm^2 uncontrolled exposure limit. The Fires formula used was: S = (P * G) / (4* * r^2) or r = (P * G) / (4 * * S) Where S = 1.0 mW/cm^2 for 2400 MHz P = 25.7mW (Maximum Conducted Power) G = 1.64(Half wave dipole antenna gain : Converted absolute value) r = Minimum safe distance from antenna (cm) A-PEX International Co., Ltd. YOKOWA LAB. For: CF-P1 r = 1.8cm 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone: int +81 596 39 1485 Facsimile: int +81 596 39 0232 Page 1

A-pex International Co., Ltd. YOKOWA LAB. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone:int +81 596 39 1485 Facsimile: int +81 596 39 0232 EMI TEST REPORT Test Report No. : 22FE0029-YW Applicant: Matsushita Electric Industrial Co.,Ltd. AVC Company Personal Computer Division Type of Equipment:Wireless LAN built in Personal Computer (SYMBOL LAN Card) Model No.:CF-P1 FCC ID:ACJ9TGCF-P11 Test standard:Fcc Part15 Subpart C, Section 15.247 *Except §15.247(e) Processing Gain Test Result:Complied This report may not be reproduced in full, partial reproduction may only be made with the written consent of the laboratory. The results in this report apply only to the sample tested. Date of test: January 28, 30 and 31, 2002 Issued date: January 18, 2002 Tested by: Naoki SakamotoTomoyuki Yamashita Group Leader of EMC sectionEMC Section Approved by: Kazutoyo Nakanishi Site Operation Manager of EMC section Test report FCC ID: ACJ9TGCF-P11 Our reference: 22FE0029-YW Page: 2 of 17 Issued date: February 18, 2002 A-pex International Co., Ltd. YOKOWA LAB. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone:int +81 596 39 1485 Facsimile: int +81 596 39 0232 Table of Contents Page 1 GENERAL INFORMATION3 1.1 Tested Methodology4 1.2 Test Facility4 2 PRODUCT DESCRIPTION5 2.1Test system Details5 3 SYSTEM TEST CONFIGURATION6 3.1 Justification6 3.2.Configuration of Tested System6 4 MEASUREMENT UNCERTAINTY7 5 TEST INSTRUMENTS8 6 SUMMARY OF TEST9 6.1 §15.207 Conducted Emissions9 6.2 §15.247(a)(2)6dB Bandwidth9 6.3 §15.247(b) Maximum Peak Out Put Power(Conducted)10 6.4 §15.247(c) Out of Band Emissions(Radiated)12 6.5 §15.247(c) Out of Band Emissions(Conducted)13 6.6 §15.247(d) Power Density(Conducted)13 Photographs of test setup 14-16 APPENDIX17 Test dataA1toA31 Test report FCC ID: ACJ9TGCF-P11 Our reference: 22FE0029-YW Page: 3 of 17 Issued date: February 18, 2002 A-pex International Co., Ltd. YOKOWA LAB. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone:int +81 596 39 1485 Facsimile: int +81 596 39 0232 1 GENERAL INFORMATION APPLICANT: Matsushita Electric Industrial Co.,Ltd. AVC Company Personal Computer Division. ADDRESS: 1-10-12 Yakumohigashi-machi, Moriguchi City Osaka 570-0021 Japan Tel: +81-6-6907-4050 Fax: +81-6-6907-4041 REGULATION(S): FCC Part15 Subpart C, Section 15.247 *Except §15.247(e) Processing Gain MODEL NUMBER: CF-P1 SERIAL NUMBER: 1LKSA00006 KIND OF EQUIPMENT: Wireless LAN built in personal computer (SYMBOL LAN Card) TESTED DATE: January 28, 30 and 31, 2002 RECEIPT DATE OF SAMPLE : January 28, 2002 REPORT FILE NUMBER: 22FE0029-YW TEST SITE: A-PEX Yokowa No.3 Open Test Sites Test report FCC ID: ACJ9TGCF-P11 Our reference: 22FE0029-YW Page: 4 of 17 Issued date: February 18, 2002 A-pex International Co., Ltd. YOKOWA LAB. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone:int +81 596 39 1485 Facsimile: int +81 596 39 0232 1.1 Tested Methodology The measurement was performed according to the procedures in ANSI C63.4(1992). 1.2 Test Facility The open area site measurement facilities used to collect the radiated data are located at 108, Yokowa-cho, Ise-shi, Mie-ken, 516-1106 Japan. These sites have been fully described in reports submitted to the FCC office. No.3 test site has filed to the FCC on September 12, 2000 as number: 90412 and is accepted by Industry Canada on May 01,2001 as number IC2973-3. Test report FCC ID: ACJ9TGCF-P11 Our reference: 22FE0029-YW Page: 5 of 17 Issued date: February 18, 2002 A-pex International Co., Ltd. YOKOWA LAB. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone:int +81 596 39 1485 Facsimile: int +81 596 39 0232 2 PRODUCT DESCRIPTION Matsushita Electric Industrial Co.,Ltd, Model CF-P1 (referred to as the EUT in this report) is a Wireless LAN built in Personal Computer(SYMBOL LAN Card). The specification is as following : Wireless LAN : Direct sequence spread spectrum.(IEEE 802.11b) 2412 through 2462MHz (11channels / each 5MHz wide) Antenna Type:/4 Monopole Antenna Antenna Gain: 2.14dBi *Fcc Part 15.31(e) The host device CF-P1 provide the LAN Module with stable power supply(DC3.3V), and the LAN module complies power supply regulation. *Fcc Part 15.203 Antenna requirement The wireless LAN card is installed in the host device and cannot be removed by the user. Due to the above reasons, the wireless LAN card meets the antenna requirements of FCC 15. 203. 2.1 Test System Details Model FCC ID Description (1) Matsushita Electric Industrial Co.,Ltd. ACJ9TGCF-P11 Wireless LAN built in PC M/N: CF-P1(SYMBOL LAN Card) S/N: 1LKSA00006 *FccPart15 Subpart B Class B Digital Device DOC (2)Matsushita Electric Industrial Co.,Ltd.DOC AC Adapter M/N: CF-AA1527 C4 S/N: C011000523A (3)PIONEER-Headphone M/N:SE-5130 S/N:- Test report FCC ID: ACJ9TGCF-P11 Our reference: 22FE0029-YW Page: 6 of 17 Issued date: February 18, 2002 A-pex International Co., Ltd. YOKOWA LAB. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone:int +81 596 39 1485 Facsimile: int +81 596 39 0232 3 SYSTEM TEST CONFIGURATION 3.1 Justification The system was configured in typical fashion (as a customer would normally use it) for testing. Test mode : Data Transmitting mode(bit rate : 11Mbps) Performed the test about channels 1(low), 6(mid) and 11(high) among 11 channels of all Carrier frequencies. 3.2 Configuration of Tested System AC 120V/60Hz 2 1 Wooden table (1)EUT (2) (3) 3 * Cabling was taken into consideration and test data was taken under worst case conditions. List of cables used No.NameLength (m)ShieldRemark 1AC Power Cable1.8NPolyvinyl chloride 2DC Power Cable1.9NPolyvinyl chloride 3Headphone2.6NPolyvinyl chloride Test report FCC ID: ACJ9TGCF-P11 Our reference: 22FE0029-YW Page: 7 of 17 Issued date: February 18, 2002 A-pex International Co., Ltd. YOKOWA LAB. 108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 JAPAN Telephone:int +81 596 39 1485 Facsimile: int +81 596 39 0232 4 Measurement Uncertainty Conducted Emission Test The measurement uncertainty (with a 95% confidence level) for t…

Text truncated - open the document above for the full version.

Matsushita Electric Industrial Co., Ltd. / FCC ID : ACJ9TGCF-P11 / Page : A6 6dB Bandwidth / CF-P1 / 22FE0029-YW 1. Ch1: 2412MHz(Low) 2. Ch6: 2437MHz(Mid) 3. Ch11: 2462MHz(Hi) A-PEX INTERNATIONAL CO., LTD. YOKOWA NO.3 OPEN SITE COMPANY : Matsushita Electric Industrial Co., Ltd.REPORT NO : 22FE0029-YW EQUIPMENT : Wireless LAN builtin PCREGULATION : Fcc Part15SubpartC 247(b)(1) MODEL : CF-P1TEST DISTANCE : 1m(10-26GHz)/3m(1-10GHz) S/N : DATE : 2002/1/28 FCC ID : ACJ9TGCF-P11Temperature : 24degrees centigrade POWER : AC120V/60HzHumidity : 34% Mode : Transmitting (ch1: 2412MHz ) ENGINEER : Naoki Sakamoto PK DETECT(S/A : RBW 1MHz and VBW 1MHz) No.FREQS/A READING ANT AMP CABLE H-Pass ATTENRESULTLimitMARGIN HORVER Factor GAINLOSSFilterHORVERPKHORVER [GHz][dB][dB][dB][dB][dB][dBuV/m] [dB][dB] 11.0324050.256.525.239.01.60.00.038.044.374.036.029.7 21.4449649.554.726.638.61.80.00.039.344.574.034.729.5 31.6515050.752.927.938.41.90.00.042.144.374.031.929.7 42.0380245.948.530.538.02.10.00.040.543.174.033.530.9 54.8240069.870.535.338.04.61.10.072.873.574.01.20.5 67.2360045.045.638.538.25.80.50.051.652.274.022.421.8 79.6480046.646.938.438.57.40.50.054.454.774.019.619.3 812.0600045.645.743.038.58.50.50.049.649.774.024.424.3 914.4728345.546.041.838.58.70.60.048.649.174.025.424.9 10 16.8848446.947.243.438.58.60.60.051.551.874.022.522.2 11 19.2968547.747.238.438.59.81.10.049.048.574.025.025.5 12 21.7088547.847.838.838.510.20.50.049.349.374.024.724.7 13 24.1208547.948.739.338.511.30.70.051.252.074.022.822.0 AV DETECT(S/A : RBW 1MHz and VBW 10Hz) No.FREQS/A READING ANT AMP CABLE H-Pass ATTENRESULTLimitMARGIN HORVER Factor GAINLOSSFilterHORVERAVHORVER [GHz][dB][dB][dB][dB][dB][dBuV/m] [dB][dB] 11.0324039.548.925.239.01.60.00.027.336.754.026.717.3 21.4449639.244.826.638.61.80.00.029.034.654.025.019.4 31.6515040.144.927.938.41.90.00.031.536.354.022.517.7 42.0380236.039.930.538.02.10.00.030.634.554.023.419.5 54.8240032.432.435.338.04.61.10.035.435.454.018.618.6 67.2360032.332.338.538.25.80.50.038.938.954.015.115.1 79.6488233.733.838.438.57.40.50.041.541.654.012.512.4 812.0608232.732.943.038.58.50.50.036.736.954.017.317.1 914.4728332.332.841.838.58.70.60.035.435.954.018.618.1 10 16.8848434.234.343.438.58.60.60.038.838.954.015.215.1 11 19.2968534.634.638.438.59.81.10.035.935.954.018.118.1 12 21.7088535.635.238.838.510.20.50.037.136.754.016.917.3 13 24.1208535.936.039.338.511.30.70.039.239.354.014.814.7 Test Distance 1.0m : Distance Factor(Dfac) = 20log(3/1) =9.5 dB *Except for the above table : All other spurious emissions were less than 20dB for the limit.P. 11 Test distance 1.0meters RESULT=Reading + ANT Factor - Amp Gain + CABLE LOSS + High Pass - Dfac DATA OF SUPURIOUS EMISSIONS(1GHz to 26GHz) Test distance 3meters RESULT=Reading + ANT Factor - Amp Gain + CABLE LOSS + (High Pass or ATTEN). Test distance 1.0meters RESULT=Reading + ANT Factor - Amp Gain + CABLE LOSS + High Pass - Dfac Test distance 3meters RESULT=Reading + ANT Factor - Amp Gain + CABLE LOSS + (High Pass or ATTEN). [dBuV][dBuV/m] [dBuV][dBuV/m] A-PEX INTERNATIONAL CO., LTD. YOKOWA NO.3 OPEN SITE COMPANY : Matsushita Electric Industrial Co., Ltd.REPORT NO : 22FE0029-YW EQUIPMENT : Wireless LAN builtin PCREGULATION : Fcc Part15SubpartC 247(b)(1) MODEL : CF-P1TEST DISTANCE : 1m(10-26GHz)/3m(1-10GHz) S/N : DATE : 2002/1/28 FCC ID : ACJ9TGCF-P11Temperature : 24degrees centigrade POWER : AC120V/60HzHumidity : 34% Mode : Transmitting (ch6: 2437MHz) ENGINEER : Naoki Sakamoto PK DETECT(S/A : RBW 1MHz and VBW 1MHz) No.FREQS/A READING ANT AMP CABLE H-Pass ATTENRESULTLimitMARGIN HORVER Factor GAINLOSSFilterHORVERPKHORVER [GHz][dB][dB][dB][dB][dB][dBuV/m] [dB][dB] 11.0326250.154.725.239.01.60.00.037.942.574.036.131.5 21.4451849.850.826.638.61.80.00.039.640.674.034.433.4 31.6503450.053.027.938.41.90.00.041.444.474.032.629.6 42.0629745.947.720.538.02.10.00.030.532.374.043.541.7 54.8740070.270.235.537.94.71.10.073.673.674.00.40.4 67.3110044.843.838.638.25.80.50.051.550.574.022.523.5 79.7480046.046.838.438.57.50.50.053.954.774.020.119.3 812.1850045.946.043.138.58.50.50.050.050.174.024.023.9 914.6220045.144.942.138…

Text truncated - open the document above for the full version.