ACJ9TGFZ40Personal Computer

Contents OPERATING INSTRUCTIONS Read Me First Personal Computer Model No. FZ-40 series Please read these instructions carefully before using this product, and save this manual for future use. Update the on-screen manuals. In these instructions, the names and terms are referred as follows. Ÿ “Windows 10 Pro” as “Windows” or “Windows 10” Ÿ “Windows 11 Pro” as “Windows” or “Windows 11” indicates Windows 10 Operating System. -(Settings) : Click (Start) and then click (Settings). indicates Windows 11 Operating System. - [Settings]:Click (Start) and then click [Settings]. è : Page in these Operating Instructions. : Reference to the on-screen manuals. Getting Started Before Turning on the Computer ................. 26 First-time Operation ..................................... 27 Read Me First / Lecture préliminaire Safety Precautions / Mesures de sécurité ....... 2 Regulatory Information / Informations réglementaires ..... 14 n Terms and illustrations in these instructions Veuillez lire attentivement ces instruction avant d’utiliser ce produit et conservez ce manuel pour une prochaine utilisation. Mettez à jour les manuels qui figurent à l’ecran. Getting Started Read Me First Appendix Appendix Software License ......................................... 34 Trademarks ................................................. 35 2 Read Me First To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbol word panels The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. DANGER Denotes a potential hazard that will result in serious injury or death. WARNING Denotes a potential hazard that could result in serious injury or death. CAUTION Denotes a hazard that could result in mi- nor injury. NOTICE Denotes a hazard that could result in property damage. The following symbols are used to classify and describe the type of instructions to be observed. This symbol is used to alert users to a specific operating procedure that must not be performed. This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safety. DANGER Precautions on the Battery Pack Electrolyte leakage, generation of heat, ignition or rupture of the Battery Pack may result. n Do Not Throw the Battery Pack into a Fire or Expose It to Exces- sive Heat n Do Not Deform, Disassemble, or Modify the Battery Pack n Do Not Short the Positive (+) and Negative (-) Contacts ð Do not place the battery pack together with articles such as necklaces or hairpins when car- rying or storing. n Do Not Apply Shocks to the Product by Dropping It, Applying Strong Pressure to It, etc. ð If this product is subjected to a strong impact, remove the bat- tery pack from the computer immediately. n Do Not Charge the Battery Us- ing Methods Other Than Those Specified n Do Not Use the Battery Pack with Any Other Product Ÿ The battery pack is rechargeable and was intended for the speci- fied product. n Do Not Use This Product with a Battery Pack Other Than the One Specified ð Use only the specified battery pack with your product. n A void Extreme Heat (Near the Fire, in Direct Sunlight, for Ex- ample) n When the Battery Pack Has De- teriorated or If Abnormal Swell- ing Occur, Replace It With a New One ð Do not continue to use a damaged battery pack. n If a Malfunction or Trouble Oc- curs, Immediately Stop Use ð If the battery pack appears to be damaged or deformed, or if it emits smoke, abnormal odor, ex- cessive heat, or other abnormal- ity, remove it from the computer immediately. Safety Precautions 3 Read Me First WARNING Fire or electric shock may result. n Do Not Do Anything That May Damage the AC Cord, the AC Plug, or the AC Adaptor Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly. ð Do not continue to use a dam- aged AC cord, AC plug and AC adaptor. Ÿ Contact your technical support office for repair. n Do Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet ð Connecting to a DC/AC convert- er (inverter) may damage the AC adaptor. On an airplane, only connect the AC adaptor/charger to an AC outlet specifically ap- proved for such use. n Do Not Pull or Insert the AC Plug If Your Hands Are Wet n Do Not Disassemble This Prod- uct Ÿ No user serviceable parts inside this unit. Refer servicing to quali- fied technician. n Do Not Touch This Product In a Thunderstorm If Connected with the AC Cable or Any Other Cables n Do Not Place Containers of Liq- uid or Metal Objects on Top of This Product ð If foreign matter has found its way inside, immediately turn the power off and unplug the AC plug (and remove the battery pack). Then contact your techni- cal support office. Fire or electric shock may result. n If a Malfunction or Trouble Oc- curs, Immediately Stop Use If the Following Malfunction Oc- curs, Immediately Unplug the AC Plug and the Battery Pack Ÿ This product is damaged Ÿ Foreign object inside this product Ÿ Smoke emitted Ÿ Unusual smell emitted Ÿ Unusually hot ð After the above procedure, con- tact your technical support office for repair. n Clean Dust and Other Debris of the AC Plug Regularly Ÿ If dust or other debris accumu- lates on the plug, humidity, etc. may cause a defect in the insula- tion. n Insert the AC Plug Completely ð Do not use a damaged plug or loose AC outlet. n Close the Connector Cover Tightly When Using This Product Where Is a Lot of Water, Mois- ture, Steam, Dust, Oily Vapors, etc. ð If foreign matter has found its way inside, immediately turn the power off and unplug the AC cord, and then remove the battery pack. Then contact your technical support office. n T urn the Power off Beforehand when Entering Location…

Text truncated - open the document above for the full version.

Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected] Ben Botros, Manager – Regulatory & Compliance Panasonic Corporation of North America Agent Authorization Letter April 25, 2022 MSBD-22-F002 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant: Panasonic Corporation of North America Subject: System Certification for Personal Computer Model FZ-40 under FCC ID: ACJ9TGFZ40 To whom it may concern: The undersigned hereby authorize UL Japan, Inc. (UL Japan) to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan on our behalf shall have the same effect as acts of our own. The undersigned hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Japan as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected] Ben Botros, Manager – Regulatory & Compliance Panasonic Corporation of North America i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid for a one year period from the date of this letter. This application for the subject equipment has not been submitted to another TCB for certification. Thank you for your attention in this matter. Sincerely, Ben Botros Manager – Regulatory and Compliance Panasonic Corporation of North America

Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected] Ben Botros, Manager – Regulatory & Compliance Panasonic Corporation of North America Request for Permanent & Short-Term Confidentiality April 25, 2022 MSBD-22- F002 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant: Panasonic Corporation of North America Subject: System Certification for Personal Computer Model FZ-40 under FCC ID: ACJ9TGFZ40 To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §0.457, §0.459), we are requesting the Commission to withhold the following attachments as permanent confidential document from public disclosure. • Theory of Operation • Tune-up Procedure • Block Diagram • Schematics Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In addition, please be advised that Panasonic Corporation of North America hereby requests the following filed sensitive information to be held under short-term confidential, pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s Rules and the provisions in FCC Public DA 04-1705. We request temporarily confidentiality of 90 days, starting from the original issued Certification grant date. • Operating Instructions (User’s Manual) • Test Setup Photographs • External and Internal Photograph Panasonic also acknowledges that we will provide appropriate notice to UL Verification Services Inc. (UL VS) should either of the following occur. • If we require additional 90 days extension period, we will notify UL VS with a new request letter at least seven days prior to the short-term confidentiality expiration date, or • We will immediately notify UL VS in the event the information regarding the product or the product is made available to the public. UL VS will them release the documents listed above for public disclosure, pursuant to FCC Public Notice DA 04-1705. Sincerely, Ben Botros Manager – Regulatory and Compliance Panasonic Corporation of North America

<FZ-40> Exterior photos FZ-40 External Photos <Top> <Bottom> <FZ-40> Exterior photos <Front> <Left> Rear Front Right Left <FZ-40> Exterior photos <Rear> <Right> <Opened>

FZ-40 WWAN <FCC ID: ACJ9TGFZ40> FCC ID Label location Bottom view Label for FZ-40

FCC ID: ACJ9TGFZ40 Internal Photos 1/16 Internal view - Front Internal view - Bottom WWAN-3rd RX Antenna A Front Camera Module WWAN-main TX/RX Antenna WLAN-BT TX/RX Antenna & WWAN-aux RX Antenna WLAN-main TX/RX Antenna WWAN-4th TX/RX Antenna A LCD Module mmWave #2 Module/Antenna mmWave #1 Module/Antenna WLAN/Bluetooth Module 3G/4G/5G Sub6/mmWave WWAN Module Main PCB mmWave #0 Module/Antenna FCC ID: ACJ9TGFZ40 Internal Photos 2/16 Front Camera Module ‒ Front Front Camera Module - Back FCC ID: ACJ9TGFZ40 Internal Photos 3/16 WLAN-BT TX/RX Antenna & WWAN-aux RX Antenna - Front WLAN-BT TX/RX Antenna & WWAN-aux RX Antenna - Back FCC ID: ACJ9TGFZ40 Internal Photos 4/16 LCD Module - Front LCD Module ‒ Back FCC ID: ACJ9TGFZ40 Internal Photos 5/16 WLAN-main TX/RX Antenna - Front WLAN-main TX/RX Antenna - Back FCC ID: ACJ9TGFZ40 Internal Photos 6/16 WWAN-4th TX/RX Antenna ‒ Front WWAN-4th TX/RX Antenna ‒ Back FCC ID: ACJ9TGFZ40 Internal Photos 7/16 WWAN-3rd RX Antenna ‒ Front WWAN-3rd RX Antenna ‒ Back FCC ID: ACJ9TGFZ40 Internal Photos 8/16 WWAN-main TX/RX Antenna - Front WWAN-main TX/RX Antenna ‒ Back FCC ID: ACJ9TGFZ40 Internal Photos 9/16 mmWave #1 Module/Antenna ‒ Front mmWave #1 Module/Antenna ‒ Back FCC ID: ACJ9TGFZ40 Internal Photos 10/16 WLAN/Bluetooth Module - Front WLAN/Bluetooth module ‒ Back FCC ID: ACJ9TGFZ40 Internal Photos 11/16 3G/4G/5G Sub6/mmWave WWAN Module - Front 3G/4G/5G Sub6/mmWave WWAN Module without shield cover ‒ Front FCC ID: ACJ9TGFZ40 Internal Photos 12/16 3G/4G/5G Sub6 mmWave WWAN Module - Back FCC ID: ACJ9TGFZ40 Internal Photos 13/16 Main PCB ‒ Front FCC ID: ACJ9TGFZ40 Internal Photos 14/16 Main PCB ‒ Back FCC ID: ACJ9TGFZ40 Internal Photos 15/16 mmWave #2 Module/Antenna - Front mmWave #2 Module/Antenna - Back FCC ID: ACJ9TGFZ40 Internal Photos 16/16 mmWave #0 Module/Antenna ‒ Front mmWave #0 Module/Antenna ‒ Back

Test report No: 14131461H-G Page: 1 of 29 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 PART 0 Power Density Characterization Report Test Report No. 14131461H-G Customer Panasonic Corporation of North America Description of EUT Personal Computer Model Number of EUT FZ-40 FCC ID ACJ9TGFZ40 Issue Date May 9, 2022 Remarks - Representative Test Engineer Approved By Hisayoshi Sato Engineer Takayuki Shimada Leader Re port Cover Page - Form-ULID-003532 (DCS:13-EM-F0429) Issue# 20.0 Test report No: 14131461H-G Page: 2 of 29 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 ANNOUNCEMENT  This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc.  The results in this report appl y only to the sample tested.  This sample tested is in compliance with the limits of the above re gulation, if any.  This test report covers PD technical requirements. It does not cover administrative issues such as Manual or non-PD test related Requirements. (if applicable)  The all test items in this test report are conducted b y UL Japan, Inc Ise EMC Lab.  The information provided from the applicant for this report is identified.  For test report(s) referred in this report, the latest version (includin g any revisions) is always referred.  This test report is out of scope of an y accreditation(s). Test report No: 14131461H-G Page: 3 of 29 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Contents 1 Introduction ..................................................................................................................................... 4 2 Customer information...................................................................................................................... 4 3 Equipment under test (EUT) ........................................................................................................... 4 3.1 Identification of EUT ............................................................................................................... 4 3.2 Product description .................................................................................................................. 5 4 Location ........................................................................................................................................... 7 5 References ....................................................................................................................................... 7 6 Time averaging for SAR and PD .................................................................................................... 7 7 Definitions, symbols, and abbreviations ......................................................................................... 8 7.1 Definitions ................................................................................................................................ 8 7.2 Symbols .................................................................................................................................... 9 7.3 Abbreviations ........................................................................................................................... 9 8 PD char generation ........................................................................................................................ 10 8.1 Outlines the PD char process ................................................................................................. 10 8.2 Codebook ............................................................................................................................... 11 8.3 Simulation modeling and validation ...................................................................................... 13 8.3.1 Exposure scenarios in PD evaluation ............................................................................. 13 8.3.2 Modeling for simulation ................................................................................................. 14 8.3.3 Modeling validation ........................................................................................................ 14 8.4 PD device uncertainty ............................................................................................................ 15 8.5 PD design target ..................................................................................................................... 15 8.6 Worst case housing determination ......................................................................................... 16 8.7 PD char generation ................................................................................................................. 18 8.7.1 Scaling factor for single beam ........................................................................................ 18 8.7.2 Scaling factor for beam pairs .......................................................................................... 18 8.7.3 Input power limit ............................................................................................................ 19 Appendix A Worst Phase Derivation for Beam Pair ....................................................................... 20 Appendix B Input Power Limit ....................................................................................................... 21 B.1 n258 input.power.limit ......................................................................................................................... 21 B.2 n261 input.power.limit ......................................................................................................................... 23 B.3 n260 input.power.limit ......................................................................................................................... 25 Appendix C Measurement uncertainty ................................................…

Text truncated - open the document above for the full version.

Page 6 of 50 Appendix B PD Measurement data Step 1: Power Reference Measurement Same as System Check Scan Procedures step 1. Step 2: 5G Scan Grid step : 0.125 (λ / 8) Grid extent : X/Y direction sufficiently large against the region of interest. Distance between probe and DUT : > λ / 5, details are shown in section 6.3. Measurement area is defined based on TCB work shop April 2019, “A sufficiently large measurement region and proper measurement spatial resolution are required to maintain field reconstruction accuracy”. ‒Fields at the measurement region boundary should be ~20-30 dB below the peaks Step 3: Power drift measurement Same as System Check Scan Procedures step 3. When the drift is smaller than ± 5 %, it is considered in the uncertainty budget if drifts larger than 5%, uncertainty is re-calculated. Page 7 of 50 B.1 n258 Module#1 L-Mid ch ID 26 + 154 ipl 0.4 dBm H + V Keyboard side Exposure Conditions Phantom Section Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor 5G Air Keyboard, 2.00 Custom Ban d CW, 0-- 24400.0, 24400000 1.0 Hardware Setup Phantom Medium Probe, Calibration Date DAE, Calibration Date mmWave- 1038 Air--- EUmmWV4 - SN9450_F1- 55GHz, 2021-11-11 DAE4 Sn1369, 2021- 05-11 Scan Setup 5G Scan Grid Extents [mm] 60.0 x 60.0 Grid Steps [lambda] 0.25 x 0.25 Sensor Surface [mm] 2.0 MAIA N/A Measurement Results 5G Scan Date 2022-03-15, 16:05 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 6.17 psPDtot+ [W/m 2 ] 7.17 psPDmod+ [W/m 2 ] 7.46 E max [V/m] 93.2 Power Drift [dB] -0.16 Warning(s) / Error(s) Details 5G Scan Warnin g(s) Error(s) Page 8 of 50 B.2 n261 Module#0 Low ch ID 153 ipl 4.8 dBm Hori. Edge 2 Exposure Conditions Phantom Section Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor 5G Air EDGE 2, 2.00 Custom Ban d CW, 0-- 27559.3, 27559300 1.0 Hardware Setup Phantom Medium Probe, Calibration Date DAE, Calibration Date mmWave- 1038 Air--- EUmmWV4 - SN9450_F1- 55GHz, 2021-11-11 DAE4 Sn1369, 2021- 05-11 Scan Setup 5G Scan Grid Extents [mm] 60.0 x 60.0 Grid Steps [lambda] 0.25 x 0.25 Sensor Surface [mm] 2.0 MAIA N/A Measurement Results 5G Scan Date 2022-03-08, 17:43 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 5.63 psPDtot+ [W/m 2 ] 7.00 psPDmod+ [W/m 2 ] 7.70 E max [V/m] 122 Power Drift [dB] -0.15 Warning(s) / Error(s) Details 5G Scan Warnin g(s) Error(s) Page 9 of 50 B.3 n260 Module#0 Mid ch ID 25 + 153 ipl 1.0 dBm H + V Edge 2 Exposure Conditions Phantom Section Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor 5G Air EDGE 2, 2.00 Custom Ban d CW, 0-- 38498.9, 38498900 1.0 Hardware Setup Phantom Medium Probe, Calibration Date DAE, Calibration Date mmWave- 1038 Air--- EUmmWV4 - SN9450_F1- 55GHz, 2021-11-11 DAE4 Sn1369, 2021- 05-11 Scan Setup 5G Scan Grid Extents [mm] 50.0 x 50.0 Grid Steps [lambda] 0.25 x 0.25 Sensor Surface [mm] 2.0 MAIA N/A Measurement Results 5G Scan Date 2022-03-09, 17:55 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 5.61 psPDtot+ [W/m 2 ] 7.01 psPDmod+ [W/m 2 ] 7.59 E max [V/m] 103 Power Drift [dB] -0.12 Warning(s) / Error(s) Details 5G Scan Warnin g(s) Error(s)

Page 10 of 50 Appendix C System Check (PD) C.1 System check result C.2 20220308_SAR2_30000 MHz System Check Circular Measurement Report for Device, FRONT, Custom Band, UID 0 -, Channel 30000000 (30000.0MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type , Device 100.0 x 100.0 x 100.0 Phone Exposure Conditions Phantom Section Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor 5G Air FRONT, 5.55 Custom Ban d CW, 0-- 30000.0, 30000000 1.0 Hardware Setup Phantom Medium Probe, Calibration Date DAE, Calibration Date mmWave- 1038 Air--- EUmmWV4 - SN9450_F1- 55GHz, 2021-11-11 DAE4 Sn1369, 2021- 05-11 Scan Setup 5G Scan Grid Extents [mm] 60.0 x 60.0 Grid Steps [lambda] 0.25 x 0.25 Sensor Surface [mm] 5.55 MAIA N/A Measurement Results 5G Scan Date 2022-03-08, 09:33 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 38.2 psPDtot+ [W/m 2 ] 38.8 psPDmod+ [W/m 2 ] 39.0 E max [V/m] 138 Power Drift [dB] -0.07 Warning(s) / Error(s) Details 5G Scan Warnin g(s) Error(s) Page 11 of 50 Square Measurement Report for Device, FRONT, Custom Band, UID 0 -, Channel 30000000 (30000.0MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type , Device 100.0 x 100.0 x 100.0 Phone Exposure Conditions Phantom Section Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor 5G Air FRONT, 5.55 Custom Ban d CW, 0-- 30000.0, 30000000 1.0 Hardware Setup Phantom Medium Probe, Calibration Date DAE, Calibration Date mmWave- 1038 Air--- EUmmWV4 - SN9450_F1- 55GHz, 2021-11-11 DAE4 Sn1369, 2021- 05-11 Scan Setup 5G Scan Grid Extents [mm] 60.0 x 60.0 Grid Steps [lambda] 0.25 x 0.25 Sensor Surface [mm] 5.55 MAIA N/A Measurement Results 5G Scan Date 2022-03-08, 09:33 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 38.0 psPDtot+ [W/m 2 ] 38.6 psPDmod+ [W/m 2 ] 38.8 E max [V/m] 138 Power Drift [dB] -0.07 Warning(s) / Error(s) Details 5G Scan Warnin g(s) Error(s) Page 12 of 50 C.3 20220309_SAR2_30000 MHz System Check Circular Measurement Report for Device, FRONT, Custom Band, UID 0 -, Channel 30000000 (30000.0MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type , Device 100.0 x 100.0 x 100.0 Phone Exposure Conditions Phantom Section Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor 5G Air FRONT, 5.55 Custom Ban d CW, 0-- 30000.0, 30000000 1.0 Hardware Setup Phantom Medium Probe, Calibration Date DAE, Calibration Date mmWave- 1038 Air--- EUmmWV4 - SN9450_F1- 55GHz, 2021-11-11 DAE4 Sn1369, 2021- 05-11 Scan Setup 5G Scan Grid Extents [mm] 60.0 x 60.0 Grid Steps [lambda] 0.25 x 0.25 Sensor Surface [mm] 5.55 MAIA N/A Measurement Results 5G Scan Date 2022-03-09, 10:17 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 38.1 psPDtot+ [W/m 2 ] 38.8 psPDmod+ [W/m 2 ] 39.0 E max [V/m] 139 Power Drift [dB] -0.03 Warning(s) / Error(s) Details 5G Scan Warnin g(s) Error(s) Page 13 of 50 Square Measurement Report for Device, FRONT, Custom Band, UID 0 -, Channel 30000000 (30000.0MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type , Device 100.0 x 100.0 x 100.0 Phone Exposure Conditions Phantom Section Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor 5G Air FRONT, 5.55 Custom Ban d CW, 0-- 30000.0, 30000000 1.0 Hardware Setup Phantom Medium Probe, Calibration Date DAE, Calibration Date mmWave- 1038 Air--- EUmmWV4 - SN9450_F1- 55GHz, 2021-11-11 DAE4 Sn1369, 2021- 05-11 Scan Setup 5G Scan Grid Extents [mm] 60.0 x 60.0 Grid Steps [lambda] 0.25 x 0.25 Sensor Surface [mm] 5.55 MAIA N/A Measurement Results 5G Scan Date 2022-03-09, 10:17 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 37.9 psPDtot+ [W/m 2 ] 38.7 psPDmod+ [W/m 2 ] 38.8 E max [V/m] 139 Power Drift [dB] -0.03 Warning(s) / Error(s) Details 5G Scan Warnin g(s) Error(s) Page 14 of 50 C.4 20220310_SAR2_30000 MHz System Check Circular Measurement Report for Device, FRONT, Custom Band, UID 0 -, Channel 30000000 (30000.0MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type , Device 100.0 x 100.0 x 100.0 Phone Exposure Conditions Phantom Section Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor 5G Air FRONT, 5.55 Custom Ban d CW, 0-- 30000.0, 30000000 1.0 Hardware Setup Phantom Medium Probe, Calibration Date DAE, Calibration Date mmWave- 1038 Air--- EUmmWV4 - SN9450_F1- 55GHz, 2021-11-11 DAE4 Sn1369, 2021- 05-11 Scan Setup 5G Scan Grid Extents [mm] 60.0 x 60.0 Grid Steps [lambda] 0.25 x 0.25 Sensor Surface [mm] 5.55 MAIA N/A Measurement Results 5G Scan Date 2022-03-10, 10:49 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 37.8 psPDtot+ [W/m 2 ] 38.2 psPDmod+ [W/m 2 ] 38.3 E max [V/m] 141 Power Drift [dB] 0.01 Warning(s) / Error(s) Details 5G Scan Warnin g(s) Error(s) Page 15 of 50 Square Measurement Report for Device, FRONT, Custom Band, UID 0 -, Channel 30000000 (30000.0MHz) Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type , Device 100.0 x 100.0 x 100.0 Phone Exposure Conditions Phantom Section Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor 5G Air FRONT, 5.55 Custom Ban d CW, 0-- 30000.0, 30000000 1.0 Hardware Setup Phantom Medium Probe, Calibration Date DAE, Calibration Date mmWave- 1038 Air--- EUmmWV4 - SN9450_F1- 55GHz, 2021-11-11 DAE4 Sn1369, 2021- 05-11 Scan Setup 5G Scan Grid Extents [mm] 60.0 x 60.0 Grid Steps [lambda] 0.25 x 0.25 Sensor Surface [mm] 5.55 MAIA N/A Measurement Results 5G Scan Date 2022-03-10, 10:49 Avg. Area [cm 2 ] 4.00 psPDn+ [W/m 2 ] 37.7 psPDtot+ [W/m 2 ] 38.1 psPDmod+ [W/m 2 ] 38.2 E max [V/m] 141 Power Drift [dB] 0.01 Warning(s) / Error(s) Details 5G Scan Warnin g(s) Error(s) C.5 20220314_SAR2_30000 MHz System Check Circular Page 16 of 50 Measurement Report for Device, FRONT, Custom Band, UID 0 -, Channel 30000000 (30000.0MHz) Device under Test Properties Model, Manufacturer Dimensions [m…

Text truncated - open the document above for the full version.

Page 22 of 50 Appendix D Calibration data D.1 PD Probe Calibration Certificate (EUmmWV4, S/N: 9450) Page 23 of 50 Page 24 of 50 Page 25 of 50 Page 26 of 50 Page 27 of 50 Page 28 of 50 Page 29 of 50 Page 30 of 50 Page 31 of 50 Page 32 of 50 Page 33 of 50 Page 34 of 50 Page 35 of 50 Page 36 of 50 Page 37 of 50 Page 38 of 50 Page 39 of 50 Page 40 of 50 Page 41 of 50 D.2 5G Verification Source 30GHz - S/N: 1053 Page 42 of 50 Page 43 of 50 Page 44 of 50 Page 45 of 50 Page 46 of 50 Page 47 of 50 Page 48 of 50 D.3 System check uncertainty <30 GHz> Uncert .Probab.Div.(c i )Std. Unc.(v i ) Error Descrip tionvalue (dB)Distri.(± dB) v eff Uncertainty terms dependent on the measurement system Calibrat ion Rep eat abilit y±0.21 N110.21 ∞ Probe correct ion±0.00 R√310.00 ∞ Frequency resp onse (BW <= 1 GHz) ±0.20R√300.00 ∞ Sensor cross coup ling±0.00 R√310.00 ∞ Isotrop y±0.30 R√310.17 ∞ Linearity±0.20 R√310.12 ∞ Probe scat t ering±0.00 R√310.00 ∞  Probe positioning …

Text truncated - open the document above for the full version.