ACJ9TGRI23DRFID Module

Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel: 201-348-7760 / [email protected] CFR 47 §2.911 (d)(5) Attestation July 5, 2024 MSBD-23- F021 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Original Limited Single Modular Approval for Panasonic RFID Module, Model RI23D under FCC ID: ACJ9TGRI23D To whom it may concern: Panasonic Corporation of North America certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Panasonic Corporation of North America certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Thank you for your attention in this matter. Sincerely, Ben Botros Manager – R egulatory and Compliance Panasonic Corporation of North America

Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel: 201-348-7760 / [email protected] Ben Botros Manager – Regulatory Compliance Panasonic Corporation of North America Agent Designation Attestation CFR 47 §2.911 and §2.909 Federal Communications Commission Date: July 25, 2024 Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: FRN 0003762242 with FCC Grantee Code ACJ - Attestation Statements Panasonic Corporation of North America (“the applicant”) certifies that, Panasonic Corporation of North America is our designated U.S. agent for service of process for the above referenced FCC Grantee Code ACJ. Panasonic Corporation of North America accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Panasonic Corporation of North America accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for Grantee Code ACJ. Designated U.S. Agent Information: Name: Panasonic Corporation of North America Address: Two Riverfront Plaza, Newark, New Jersey, United States Contact Person: Ben Botros Tel.: 201-348-7760 Email: [email protected] We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. This agreement applies to all products applied by Panasonic Corporation of North America for FCC Grantee Code ACJ and is valid within the product life. Sincerely, Ben Botros Manager – Regulatory & Compliance Panasonic Corporation of North America FRN 0003762242

Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel: 201-348-7760 / [email protected] Agent Authorization Letter July 5, 2024 MSBD-23- F021 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Original Limited Single Modular Approval for Panasonic RFID Module, Model RI23D under FCC ID: ACJ9TGRI23D To whom it may concern: The undersigned hereby authorize HCT Co. Ltd. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by HCT Co. Ltd. on our behalf shall have the same effect as acts of our own. The undersigned hereby certify that I am not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing HCT Co. Ltd. as our agent, we still recognize that we are responsible to: a) Comply with the relevant provisions of the certification program; b) Make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal a udit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) Make claims regarding certification only in respect of the scope for which certification has been granted; d) Do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) Upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) Use certification only to indicate the products are certified as being in conformity with specified standards; g) Endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) Ensure t hat any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) Keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel: 201-348-7760 / [email protected] j) Take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) Document the actions taken. l) As the Grantee, Panasonic is very aware of the responsibilities per (47 CFR 2.909). This authorization is for Limited Single Modular Approval, FCC ID: ACJ9TGRI23D and is valid for one-year period from the date of this letter. Thank you for your attention in this matter. Authorized by, Ben Botros Manager – Regulatory & Compliance Panasonic Corporation of North America

Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel: 201-348-7760 / [email protected] Request for Confidentiality July 5, 2024 MSBD-23- F021 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Original Limited Single Modular Approval for Panasonic RFID Module, Model RI23D under FCC ID: ACJ9TGRI23D To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §0.457, §0.459), we are requesting the Commission to withhold the following attachments as permanent confidential documents from public disclosure. • Block Diagram • Operational Description • Parts List • Schematics Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In addition, please be advised that Panasonic Corporation of North America hereby requests the following filed sensitive information to be held under short-term confidential, pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s Rules and the provisions in FCC Public DA 04-1705. We request temporarily confidentiality of 180 days, starting from the original issued Certification grant date. • User Manual • Test Setup Photos • Internal and external Photos Thank you for your attention in this matter. Sincerely, Ben Botros Manager – R egulatory and Compliance Panasonic Corporation of North America

Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel: 201-348-7760 / [email protected] Request for Limited Modular Transmitter Approval July 5, 2024 MSBD-23-F021 FCC ID: ACJ9TGRI23D Applicant: Panasonic Corporation of North America This transmitter, model: RI23D is designed by Panasonic and complies with the modular transmitters basic requirements (Item 1 to 8) in FCC Part 15 Subpart C Section 15.212 as indicated below: This is Limited modular approval as this module is limited to installation by the grantee into our host systems. Modular Approval Checklist: Modular approval requirement Yes No (1) Have its own RF shielding. The device does not have metal shielding to cover RF section. Refer to Internal Photos (2) Have buffered modulation/data inputs. (3) Have its own power supply regulation. (4) Comply with the antenna and transmission system requirements of § 15.203, 15.204(b) and 15.204(c). (5) Tested in a stand-alone configuration. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in FCC § 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module. The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available. The device was installed into the final product for testing. Refer to Test Setup Photos. (6) Equipped with either a permanently affixed label or must be capable of electronically displaying its FCC ID. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. (7) Comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. (8) Comply with any applicable RF exposure requirements in its final configuration: The modular transmitter complies with FCC radiation exposure requirement. Sincerely, Ben Botros Manager – Regulatory and Compliance Panasonic Corporation of North America

FCC ID:ACJ9TGRI23D, IC: 216H-CFRI23D <CF-33 (mk4)> Label & location 1/2 1. Label for CF-33 (Host PC) 1.1 Label for RFID module on the host (FCC ID, ISED certification number) This PC contains/Ce PC contient; FCC ID : ACJ9TGRI23D IC : 216H-CFRI23D FCC ID:ACJ9TGRI23D, IC: 216H-CFRI23D <CF-33 (mk4)> Label & location 2/2 2. Label location Equipment of CF-33 Users can confirm the FCC ID/ ISED certification number on the nameplate when they attach the battery pack. The label is affixed to the host device using strong adhesive on its backside. (Under the battery pack) Tablet Computer Bottom view Name plate FCC ID ISED certification number

FCC ID : ACJ9TGRI23D IC : 216H-CFRI23D <CF-33 (mk4)> label & location 1. Label 2. Label location (FCC ID, ISED certification number) Label Model : RI23D FCC ID : ACJ9TGRI23D IC : 216H-CFRI23D RI23D module

Unlicensed Band Antenna information ;E&Ϳ Model: RI23D FCC ID: ACJ9TGRI23D 1)&DQWHQQD  $QWHQQDW\SHLoop antenna - Operating Frequency : 13.56 MHz - Antenna gain is not required. Only radiated measurements were used to show compliance with the FCC limits for fundamental and spurious emissions.

Testing and Certification F-TP22-03 (Rev. 06) Page 1 of 58 The report shall not be (partly) reproduced except in full without approval of the laboratory. HCT CO.,LTD . 2-6, 73, 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 645 6300 F ax. +82 31 6456401 TEST REPORT SAR Test for certification of ACJ9TGRI23D APPLICANT Panasonic Corporation of North America REPORT NO. HCT-SR-2407-FC009-R3 DATE OF ISSUE Aug. 01, 2024 Tested by Hae sun Park (signature) Technical Manager Yun Jeang, Heo (signature) The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 2 of 58 HCT CO.,LTD. 2-6, 73, 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 645 6300 Fax. +82 31 645 6401 TE S T R E P O R T R F I D S A R T e s t f o r c e r t i f i c a t i o n REPORT NO. HCT-SR-2407-FC009-R3 DATE OF ISSUE Aug. 01, 2024 FCC ID ACJ9TGRI23D Applicant Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490, USA Product Name Model Name Host Model Name HF-RFID module RI23D CF-33 Date of Test Jun. 24, 2024 Location of Test ■ Permanent Testing Lab □ On Site Testing Lab (Address: 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA) FCC Rule Part(s) CFR §2.1093 Test Results PASS (SAR Limit: 1.6 W/kg) This device has been performed SAR testing in accordance with FCC KDB 447498 D01 Interim General RF Exposure Guidance v06. The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 3 of 58 Report No. HCT-SR-2407-FC009-R3 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 Jul. 22, 2024 Initial Release 1 Jul. 29, 2024 Revised page 7,10,18 , Section 8 2 Jul. 31, 2024 Revised page 7, Section 8 3 Aug. 01 2024 Revised Section 8 Notice Content The results shown in this test report only apply to the sample(s), as received, provided by the applicant, unless otherwise stated. The test results have only been applied with the test methods required by the standard(s). The laboratory is not accredited for the test results marked *. Information provided by the applicant is marked **. Test results provided by external providers are marked ***. When confirmation of authenticity of this test report is required, please contact www.hct.co.kr The test results in this test report are not associated with the ((KS Q) ISO/IEC 17025) accreditation by KOLAS (Korea Laboratory Accreditation Scheme) / A2LA (American Association for Laboratory Accreditation) that are under the ILAC (International Laboratory Accreditation Cooperation) Mutual Recognition Agreement (MRA). The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 4 of 58 Report No. HCT-SR-2407-FC009-R3 CONTENTS 1. Test Regulations .................................................................................................................................................... 5 2. Test Location ......................................................................................................................................................... 6 3. Information of the EUT ....................................................................................................................................... 6 4. Device Under Test Description ......................................................................................................................... 8 5. Limits ........................................................................................................................................................................ 9 6. System Verification ............................................................................................................................................ 10 7. SAR Test Data Summary ................................................................................................................................... 11 8. Simultaneous Transmission Summation ...................................................................................................... 12 9. Measurement Uncertainty .............................................................................................................................. 23 10. SAR Test Equipment ....................................................................................................................................... 24 Appendix A. DUT Ant. Information & SETUP PHOTO ................................................................................. 25 Appendix B. – SAR Test Plots ............................................................................................................................. 26 Appendix C. –Verification Plots ......................................................................................................................... 28 Appendix D. – Probe Calibration Data ............................................................................................................ 30 Appendix E. – Dipole Calibration Data ............................................................................................................ 52 The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 5 of 58 Report No. HCT-SR-2407-FC009-R3 1. Test Regulations The tests documented in this report were performed in accordance with FCC CFR § 2.1093, IEEE 1528-2013, ANSI C63.26-2015 the following FCC Published RF exposure KDB procedures: - FCC KDB Publication 447498 D01 General RF Exposure Guidance v06 - FCC KDB Publication 616217 D04 SAR Tablets v01r02 - FCC KDB Publication 690783 D01 SAR Listings on Grants v01r03 - FCC KDB Publication 865664 D02 SAR Reporting v01r02 The report shall not be (partly) reproduced except in full without approval…

Text truncated - open the document above for the full version.

TEST REPORT FCC/ISED RFID Test for RI23D Certification APPLICANT Panasonic Connect Co.,Ltd. REPORT NO. HCT-RF-2406-FI014-R2 DATE OF ISSUE July 30, 2024 Tested by Jeong Ho Kim Technical Manager Jong Seok Lee F-TP22-03(Rev.06) 1 / 36 The report shall not be (partly) reproduced except in full without approval of the laboratory. HCT CO., LTD. 2-6, 73, 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 645 6300 Fax. +82 31 645 6401 The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 2 of 36 HCT CO.,LTD. 2-6, 73, 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 645 6300 Fax. +82 31 645 6401 TEST REPORT REPORT NO. HCT-RF-2406-FI014-R2 DATE OF ISSUE July 30, 2024 ApplicantPanasonic Connect Co.,Ltd. ytv Kyobashi Building, 2-2-33 Shiromi, Chuo-ku, Osaka 540-8553 Japan Product Name Model Name RFID Module RI23D FCC ID IC ACJ9TGRI23D 216H-CFRI23D RF Peak Output Power25.47 dBμV/m @30 m Frequency of Operation13.56 MHz Date of TestJune 04, 2024 ~ June 18, 2024 FCC Classification Low Power Communication Device Transmitter (DXX) Test Standard UsedFCC Part 15.225 Subpart C RSS-210 Issue 10_Amendment (April 2020) RSS-Gen Issue 5_Amendment 2 (February 2021) Location of Test Ӎ Permanent Testing Lab ӎ On Site Testing Lab (Address: 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi- do, Republic of Korea) Test ResultsPASS The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-RF-2406-FI014-R2 F-TP22-03 (Rev. 06) Page 3 of 36 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 June 21, 2024 Initial Release 1 July 23, 2024 - Revised the antenna requirements (page.8) - Added the note for all simultaneous transmission scenarios (page.20) 2 July 30, 2024 - Revised the note for all simultaneous transmission scenarios (page.20) Notice Content Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications o f all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC/ISED Rules under normal use and maintenance. The results shown in this test report only apply to the sample(s), as received, provided by the applicant, unless otherwise stated. The test results have only been applied with the test methods required by the standard(s). The laboratory is not accredited for the test results marked *. Information provided by the applicant is marked **. Test results provided by external providers are marked ***. When confirmation of authenticity of this test report is required, please contact www.hct.co.kr The test results in this test report are not associated with the ((KS Q) ISO/IEC 17025) accreditation by KOLAS (Korea Laboratory Accreditation Scheme) / A2LA (American Association for Laboratory Accreditation) that are under the ILAC (International Laboratory Accreditation Cooperation) Mutual Recognition Agreement (MRA). The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-RF-2406-FI014-R2 F-TP22-03 (Rev. 06) Page 4 of 36 CONTENTS 1. EUT DESCRIPTION 5 2. TEST METHODOLOGY 6 EUT CONFIGURATION 6 EUT EXERCISE 6 GENERAL TEST PROCEDURES 6 DESCRIPTION OF TEST MODES 7 3. INSTRUMENT CALIBRATION 7 4. FACILITIES AND ACCREDITATIONS 7 FACILITIES 7 EQUIPMENT 7 5. ANTENNA REQUIREMENTS 8 6. MEASUREMENT UNCERTAINTY 9 7. DESCRIPTION OF TESTS 10 8. TEST SUMMARY 21 9. TEST RESULT 23 9.1. Operation within the band 13.110 MHz ˊ 14.010 MHz 23 9.2. Radiated Emission 9kHz ˊ 30 MHz 25 9.3. Radiated Emission 30MHz ˊ 1000 MHz 26 9.4. 20 dB Bandwidth 27 9.5. Frequency Stability 28 9.6. POWERLINE CONDUCTED EMISSIONS 32 9.7 RECEIVER SPURIOUS EMISSIONS 33 10. LIST OF TEST EQUIPMENT 34 11. ANNEX A_ TEST SETUP PHOTO 36 The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-RF-2406-FI014-R2 F-TP22-03 (Rev. 06) Page 5 of 36 1. EUT DESCRIPTION Model RI23D Additional model - EUT Type RFID Module Power Supply DC 11.10 V Frequency Range 13.56 MHz Max. RF Output Power 25.47 dBμV/m @30 m Modulation Type ASK PMN (Product Marketing Number) RI23D HVIN (Hardware Version Identification Number) RI23D FVIN (Firmware Version Identification Number) N/A HMN (Host Marketing Name) CF-33 EUT serial numbers Radiated : S0P-21-03641 The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-RF-2406-FI014-R2 F-TP22-03 (Rev. 06) Page 6 of 36 2. TEST METHODOLOGY The measurement procedure described in the American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices (ANSI C63.10-2013) is used in the measurement of the test device. EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. EUT EXERCISE The EUT was operated in the engineering mode to fix the Tx frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the Section 15.207, 15.209 and 15.225 under the FCC Rules Part 15 Subpart C. The EUT was operated in the engineering mode to fix the Tx frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the RSS- Gen issue 5, RSS-210 Issue 10. GENERAL TEST PROCEDURES Conducted Emissions The EUT is placed on…

Text truncated - open the document above for the full version.