ACJJT-H200PRBluetooth Handy Printer

PRINTER OPERATING INSTRUCTIONS Model No. JT-H200PR Series Contents English Read Me First ................... 1 1.Getting Started ............... 2 2.Operation ...................... 6 3.Appendix ....................... 8 Deutsch Einführung ..................... 11 1.Vorbereitung ................. 12 2.Betrieb ......................... 16 3.Anhang ........................ 18 １ Read Me First Introduction Thank you for purchasing the JT-H200PR series Panasonic Printer. This manual describes the instructions for the printer. Please read this manual carefully before using this product. What’s in the Box? 1. Printer (Battery is not included.) 2. Operation Instructions manual (this book) Options 1. Battery Pack : JT-H100DP-50 2. Battery Charger : JT-H100CG-50/51 3. Wearable Case : JT-H200PR-C0 Other Equipment 1. Thermal Paper (Please ask our sales rep about the recommended Paper.) This Printer is equipped with “Bluetooth” wireless communication. [Class2 Device] ２ 1. Getting Started ■ Precautions [ Printer:JT-H200PR-∗∗ ] 1. Avoid Radio Frequency Interference Do not place the printer near a television or radio receiver. 2. Avoid Stacking Do not place heavy objects on the printer. 3. Keep Small Objects Away Do not insert paper clips or other small objects into printer. There is the risk of heat, fire or explosion. 4. Keep Dry There is the risk of heat, fire or explosion. 5. Do Not Disassemble the Printer Do not attempt to disassemble the printer. There is the risk of heat, fire or explosion. 6. Do Not Touch Keep your hands away from the paper cutter and the thermal head. There is the danger of injury. 7. Do Not Use With Any Other Battery The printer is designed for the specified JT-H100DP-50 battery. Do not use the printer with any other battery. 8. Do Not Use DC Jack and Serial I/F DC jack and serial I/F is used for maintenance purposes by Panasonic service person only. Do not use them without a service person. If the equipment is inappropriately used, there is a risk of heat, fire or explosion. 9. Do Not Use In Aircrafts or Hospitals This printer includes “Bluetooth” wireless communication. Turn off the power switch in aircrafts or hospitals. Abnormal use may occur if used in close proximity to electric instruments or electro-medical apparatus. <NOTE> Do not open the cover while the printer is operating. Keep the thermal paper away from the direct exposure to light, high temperature, dust and humidity. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions and local requirements. ３ ■ Precautions [ Battery Pack:JT-H100DP-50 ] 1. Avoid Heat Do not throw the battery pack into a fire or expose it to excessive heat. There is the risk of explosion. 2. Keep Articles Away Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing. There is the risk of heat, fire or explosion. 3. Keep Dry There is the risk of heat, fire or explosion. 4. Do Not Disassemble Do not insert sharp objects into the battery pack. Do not deform, disassemble, or modify the printer. There is the risk of heat, fire or explosion. 5. Do Not Short Do not short the positive (+) and negative(-) contact. There is the risk of heat, fire or explosion. 6. Avoid Extreme Heat, Cold, and Direct Sunlight Do not charge, use or leave the battery pack for extended periods where it will be exposed to direct sunlight or in a hot, or cold environment. 7. Do Not Put Into a Microwave Oven Do not put the battery pack into a microwave oven or a pressurized chamber. There is the risk of explosion. 8. Do Not Use With Any Other Device The battery pack is designed for the specified JT-H200PR-∗∗ printer and JT-H100CG-50/51 charger. Do not use the battery with any other device. 9. Stop Using Should the battery emit an abnormal odor, become hot to the touch, become discolored, change shape, or become in any way different, remove it from the printer and stop using it. <NOTE> Please charge the battery pack for a minium of 100mins before first use. Please ask our sales rep about the dispose method of the battery. If the battery pack is not going to be used for a long period, charge or discharge the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions and local requirements. ４ ■ Precautions [ Battery Charger:JT-H100CG-50/51 ] 1. Keep Small Objects Away Do not insert paper clips or other small objects into charger. There is the risk of heat or fire. 2. Do Not Disassemble the Charger Do not attempt to disassemble the charger. There is the risk of heat or fire. 3. Keep Dry There is the risk of heat or fire. 4. Do Not Short Do not short the positive(+) and negative(-) contact. There is the risk of heat or fire. 5. Do Not Use With Any Other Battery The charger is designed for the specified JT-H100DP-50 battery. Do not use the charger with any other battery. 6. Do Not Touch the Plug with Wet Hands. There is the risk of electric shock. 7. Do Not Touch the Charger During a Lightning. There is the risk of electric shock. 8. Be Certain to Plug Fully Into the Outlet. There is the risk of electric shock or fire. 9. When Unplugging, Make Sure to Hold the Body of the Plug . If the power strip is damaged, there is a risk of electric shock, short circuit or fire. 10. Do Not Use a Damaged Power-code or Plug. There is the risk of electric shock or fire. 11. Clean the Dust off the Plug, Periodically. There is the risk of heat or fire. <NOTE> To prolong the life of battery pack, please remove it from the charger within 24 hours after charging is complete. Please charge the battery in 5 to 40 degrees temperature. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions and local requirements. ５ ■ Name of each part & function Si…

Text truncated - open the document above for the full version.

PRINTER OPERATING INSTRUCTIONS Model No. JT-H200PR Series Contents English Read Me First ................... 1 1.Getting Started ............... 2 2.Operation ...................... 6 3.Appendix ....................... 8 Deutsch Einführung ..................... 11 1.Vorbereitung ................. 12 2.Betrieb ......................... 16 3.Anhang ........................ 18 １ Read Me First Introduction Thank you for purchasing the JT-H200PR series Panasonic Printer. This manual describes the instructions for the printer. Please read this manual carefully before using this product. What’s in the Box? 1. Printer (Battery is not included.) 2. Operation Instructions manual (this book) Options 1. Battery Pack : JT-H100DP-50 2. Battery Charger : JT-H100CG-50/51 3. Wearable Case : JT-H200PR-C0 Other Equipment 1. Thermal Paper (Please ask our sales rep about the recommended Paper.) This Printer is equipped with “Bluetooth” wireless communication. [Class2 Device] ２ 1. Getting Started ■ Precautions [ Printer:JT-H200PR-∗∗ ] 1. Avoid Radio Frequency Interference Do not place the printer near a television or radio receiver. 2. Avoid Stacking Do not place heavy objects on the printer. 3. Keep Small Objects Away Do not insert paper clips or other small objects into printer. There is the risk of heat, fire or explosion. 4. Keep Dry There is the risk of heat, fire or explosion. 5. Do Not Disassemble the Printer Do not attempt to disassemble the printer. There is the risk of heat, fire or explosion. 6. Do Not Touch Keep your hands away from the paper cutter and the thermal head. There is the danger of injury. 7. Do Not Use With Any Other Battery The printer is designed for the specified JT-H100DP-50 battery. Do not use the printer with any other battery. 8. Do Not Use DC Jack and Serial I/F DC jack and serial I/F is used for maintenance purposes by Panasonic service person only. Do not use them without a service person. If the equipment is inappropriately used, there is a risk of heat, fire or explosion. 9. Do Not Use In Aircrafts or Hospitals This printer includes “Bluetooth” wireless communication. Turn off the power switch in aircrafts or hospitals. Abnormal use may occur if used in close proximity to electric instruments or electro-medical apparatus. <NOTE> Do not open the cover while the printer is operating. Keep the thermal paper away from the direct exposure to light, high temperature, dust and humidity. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions and local requirements. ３ ■ Precautions [ Battery Pack:JT-H100DP-50 ] 1. Avoid Heat Do not throw the battery pack into a fire or expose it to excessive heat. There is the risk of explosion. 2. Keep Articles Away Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing. There is the risk of heat, fire or explosion. 3. Keep Dry There is the risk of heat, fire or explosion. 4. Do Not Disassemble Do not insert sharp objects into the battery pack. Do not deform, disassemble, or modify the printer. There is the risk of heat, fire or explosion. 5. Do Not Short Do not short the positive (+) and negative(-) contact. There is the risk of heat, fire or explosion. 6. Avoid Extreme Heat, Cold, and Direct Sunlight Do not charge, use or leave the battery pack for extended periods where it will be exposed to direct sunlight or in a hot, or cold environment. 7. Do Not Put Into a Microwave Oven Do not put the battery pack into a microwave oven or a pressurized chamber. There is the risk of explosion. 8. Do Not Use With Any Other Device The battery pack is designed for the specified JT-H200PR-∗∗ printer and JT-H100CG-50/51 charger. Do not use the battery with any other device. 9. Stop Using Should the battery emit an abnormal odor, become hot to the touch, become discolored, change shape, or become in any way different, remove it from the printer and stop using it. <NOTE> Please charge the battery pack for a minium of 100mins before first use. Please ask our sales rep about the dispose method of the battery. If the battery pack is not going to be used for a long period, charge or discharge the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions and local requirements. ４ ■ Precautions [ Battery Charger:JT-H100CG-50/51 ] 1. Keep Small Objects Away Do not insert paper clips or other small objects into charger. There is the risk of heat or fire. 2. Do Not Disassemble the Charger Do not attempt to disassemble the charger. There is the risk of heat or fire. 3. Keep Dry There is the risk of heat or fire. 4. Do Not Short Do not short the positive(+) and negative(-) contact. There is the risk of heat or fire. 5. Do Not Use With Any Other Battery The charger is designed for the specified JT-H100DP-50 battery. Do not use the charger with any other battery. 6. Do Not Touch the Plug with Wet Hands. There is the risk of electric shock. 7. Do Not Touch the Charger During a Lightning. There is the risk of electric shock. 8. Be Certain to Plug Fully Into the Outlet. There is the risk of electric shock or fire. 9. When Unplugging, Make Sure to Hold the Body of the Plug . If the power strip is damaged, there is a risk of electric shock, short circuit or fire. 10. Do Not Use a Damaged Power-code or Plug. There is the risk of electric shock or fire. 11. Clean the Dust off the Plug, Periodically. There is the risk of heat or fire. <NOTE> To prolong the life of battery pack, please remove it from the charger within 24 hours after charging is complete. Please charge the battery in 5 to 40 degrees temperature. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions and local requirements. ５ ■ Name of each part & function Si…

Text truncated - open the document above for the full version.

JT-H200PR Label [Location] Barcode Area (DC Jack) * (Serial I/F) * * Maintenance purpose only Paper Cover Label Connector Cover Battery Cover Lever Power Switch Paper Out Paper Cover Lever IrDA I/F Ext Photo Front 1 view Side 1 view Side 2 view Side 3 view Front 2 view Front 3 view

JT-H200PR-** Label <NOTE> Model No. Model No. JT-H200PR-** [ ** : ID mark variation of printer] 1. Mark description: Double figures of alpha-numeral 2. Difference: Color of case, design of logo label, design of operating panel (in colors, In character), description of main brand (size, with or without logo, language: mother language etc), with or without hook for fixing belt. There is no different in electric spec and mechanism. [Location] Barcode Area (DC Jack) * (Serial I/F) * * Maintenance purpose only Paper Cover Label Connector Cover Battery Cover Lever Power Switch Paper Out Paper Cover Lever IrDA I/F <NOTE>

Int. Photo Photo 1 Photo 2 Photo 3 Photo 4

Radio Test Report: 99416130 Applicant: Matsushita Electric Industrial Co., Ltd. 4-3-1, Tsunashima-higashi, Kohoku-ku 223-8639, Yokohama Japan Equipment Under Test: JT-H200PR-** FCC ID: ACJJT-H200PR In Accordance With: FCC Part 15, Subpart C, 15.247 (10-1-02 edition) Frequency Hopping Transmitters Tested By: Telefication bv Edisonstraat 12a 6902 PK Zevenaar The Netherlands Test Engineer: _________________________________ ing. J.C. le Clercq, Test Engineer Reviewed by: _________________________________ ing. P.A. Suringa, Senior Engineer Radio/EMC Authorized by: _________________________________ J.P. van de Poll, Co-ordinator Test Group Date: 5 October 2003 Total Number of Pages: 47 Telefication FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSCEIVER EQUIPMENT: JT-H200PR-** FCC ID: ACJJT-H200PR PROJECT NO.: 99416130 Page 2 of 47 Table of Contents Section 1. Summary of Test Results ....................................................................................... 3 Section 2. Equipment Under Test (E.U.T.)............................................................................. 5 Section 3. Channel Separation ................................................................................................ 9 Section 4. Pseudorandom Hopping Algorithm ..................................................................... 11 Section 5. Time of Occupancy.............................................................................................. 12 Section 6. Occupied Bandwidth............................................................................................ 13 Section 7. Peak Power Output .............................................................................................. 16 Section 8. Spurious Emissions (Exploratory Radiated)........................................................ 17 Section 9. Spurious Emissions (Radiated) ............................................................................ 24 Section 10. Spurious Emissions (Restricted bands Radiated) ................................................ 25 Section 11. Test Equipment List ............................................................................................. 26 ANNEX A TEST DETAILS .................................................................................................. 27 ANNEX B PHOTOGRAPHS ................................................................................................ 34 Telefication FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSCEIVER EQUIPMENT: JT-H200PR-** FCC ID: ACJJT-H200PR PROJECT NO.: 99416130 Page 3 of 47 Section 1. Summary of Test Results Manufacturer: Matsuhita Electric Industrial Co., Ltd. Model No.: JT-H200PR-** Serial No.: 2092009101 Date Received In Laboratory: 7 April 2003 These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 15, Subpart C, Paragraph 15.247 for Frequency Hopping Spread Spectrum devices. Radiated tests were conducted is accordance with ANSI C63.4-2001. New Submission Production Unit Class II Permissive Change Pre-Production Unit Family Listing THIS TEST REPORT RELATES ONLY TO THE ITEM(S) TESTED. THE FOLLOWING DEVIATIONS FROM, ADDITIONS TO, OR EXCLUSIONS FROM THE TEST SPECIFICATIONS HAVE BEEN MADE. See “ Summary of Test Data”. Telefication bv authorizes the above named company to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Telefication bv accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. Telefication complies with the accreditation criteria for test laboratories as laid down in ISO/IEC 17025:1999. The accreditation covers the quality system of the laboratory as well as the specific activities as described in the authorized annex bearing the accreditation number L021 and is granted on 30 November 1990 by the Dutch Council For Accreditation (RvA: Raad voor Accreditatie). Telefication FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSCEIVER EQUIPMENT: JT-H200PR-** FCC ID: ACJJT-H200PR PROJECT NO.: 99416130 Page 4 of 47 Summary Of Test Data NAME OF TEST PARA. NO. SPEC. MEAS. RESULT Powerline Conducted Emissions 15.207(a) 48 dBμV N.A. N.A. Channel Separation 15.247(a)(1) Greater than 25 kHz or 20 dB bandwidth 1 MHz PASS Pseudorandom Hopping Algorithm 15.247(a)(1) Bluetooth PASS Time of Occupancy 15.247(a)(1)(ii) ≤ 0.4 sec in 30 sec 0.120 sec PASS 20 dB Occupied Bandwidth 15.247(a)(1) ≤ 1 MHz 0.542 MHz PASS Peak Power Output 15.247(b) 1 Watt 1.2 mW PASS Spurious Emissions (Antenna Conducted) 15.247(c) -20 dBc N.A. N.A. Spurious Emissions (Radiated) 15.247(c) Table 15.209(a) See Note 1 PASS Test Conditions: Indoor Temperature: 26 °C Humidity: 52 % Note 1: See test report by TNO Electronic Products & Services (EPS), project number 03081901.r03, dated September 4, 2003 Telefication FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSCEIVER EQUIPMENT: JT-H200PR-** FCC ID: ACJJT-H200PR PROJECT NO.: 99416130 Page 5 of 47 Section 2. Equipment Under Test (E.U.T.) General Equipment Information Frequency Band: 902 – 928 MHz 2400 – 2483.5 MHz Number of Channels: 79 Channel Spacing: 1 MHz Emissions Designator: 1M00G1D User Frequency Adjustment: Software controlled Telefication FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSCEIVER EQUIPMENT: JT-H200PR-** FCC ID: ACJJT-H200PR PROJECT NO.: 99416130 Page 6 of 47 Description of Modification for Modification Filing Not applicable Family List Rational Not applicable Telefication FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSCEIVER EQUIPMENT: JT-H200PR-** FCC ID: ACJJT-H200PR PROJECT NO.: 99416130 Page 7 of 47 Theory of Operatio…

Text truncated - open the document above for the full version.

Testing and certification of electric, electronic and radio equipment/installations including telecommunication systems TNO Electronic Products & Services (EPS) B.V. P.O. Box 15 9822 ZG Niekerk (NL) Smidshornerweg 18 9822 TL Niekerk (NL) Telephone: +31 594 505005 Telefax: +31 594 504804 E-mail: [email protected] Web: www.eps.tno.nl Project number: 03081801.r03 Page 1 of 15 TEST REPORT OF A 2.4 GHz WIRELESS BLUETOOTH HANDY PRINTER, BRAND PANASONIC, MODEL JT-H200PR-**, IN CONFORMITY WITH 47 CFR PART 15 (2003-07-22). FCC listed Industry Canada VCCI registered : : : 90828 IC3501 R-1518, C-1598 Test specification(s): Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 47 CFR Part 15 (2003-07-22) Wireless Bluetooth Handy Printer Matsushita Electric Industrial Co., Ltd. Panasonic JT-H200PR-** ACJJT-H200PR Project number: 03081901.r03 Page 2 of 15 MEASUREMENT/TECHNICAL REPORT Panasonic Model : JT-H200PR-** FCC ID: ACJJT-H200PR September 4, 2003 This report concerns: Original grant/certification Class 2 change Verification Equipment type: Wireless Bluetooth Handy Printer Deferred grant requested per 47 CFR 0.457(d)(1)(ii) ? Yes No Report prepared by: Name : H. J. Pieters Company name : TNO Electronic Products & Services (EPS) B.V. Address : Smidshornerweg 18 Postal code/city : 9822 ZG Niekerk Mailing address : P.O. Box 15 Postal code/city : 9822 TL Niekerk Country : The Netherlands Telephone number : + 31 594 505 005 Telefax number : + 31 594 504 804 E-mail : [email protected] The data taken for this test and report herein was done in accordance with 47 CFR Part 15 and the measurement procedures of ANSI C63.4-1992. TNO Electronic Products & Services (EPS) B.V. at Niekerk, The Netherlands, certifies that the data is accurate and contains a true representation of the emission profile of the Equipment Under Test (EUT) on the date of the test as noted in the test report. I have reviewed the test report and find it to be an accurate description of the test(s) performed and the EUT so tested. Date: September 4, 2003 Signature: P.A.J.M. Robben, B.Sc.E.E. TNO Electronic Products & Services (EPS) B.V. Test specification(s): Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 47 CFR Part 15 (2003-07-22) Wireless Bluetooth Handy Printer Matsushita Electric Industrial Co., Ltd. Panasonic JT-H200PR-** ACJJT-H200PR Project number: 03081901.r03 Page 3 of 15 Description of test item Test item : Wireless Bluetooth Handy Printer Manufacturer : Matsushita Electric Co., Ltd. Brand : Panasonic Model : JT-H200PR-** Serial numbers : 202009100 Receipt number : 1 Receipt date : September 3, 2003 Applicant information Applicantís representative : Mr. Wouters Company : Telefication b.v. Address : Edisonstraat 12a Postal code : 6902 PK City : Zevenaar PO-box : - Postal code : - City : - Country : The Netherlands Telephone number : +31 (0)316 583180 Telefax number : +31 (0)316 583189 Test(s) performed Location : Niekerk Test(s) started : September 4, 2003 Test(s) completed : September 4, 2003 Purpose of test(s) : Type approval / certification Test specification(s) : 47 CFR Part 15 (2003-07-22) Test engineer : H. J. Pieters Report written by : H. J. Pieters Project leader : P.A.J.M. Robben, B.Sc.E.E. This report is in conformity with NEN-EN-ISO/IEC 17025. This report shall not be reproduced, except in full, without the written permission of TNO Electronic Products & Services (EPS) B.V. The test results relate only to the item(s) tested. Test specification(s): Description of EUT: Manufacturer: Brand mark: Model: FCC ID: 47 CFR Part 15 (2003-07-22) Wireless Bluetooth Handy Printer Matsushita Electric Industrial Co., Ltd. Panasonic JT-H200PR-** ACJJT-H200PR Project number: 03081901.r03 Page 4 of 15 Table of contents 1 General information................................................................................................................................................................. 5 1.1 Product description .......................................................................................................................................................... 5 1.2 Related submittal(s) and/or Grant(s) ............................................................................................................................... 5 1.3 Tested system details ....................................................................................................................................................... 5 1.4 Test methodology ............................................................................................................................................................ 6 1.5 Test facility ...................................................................................................................................................................... 6 1.6 Product labeling ............................................................................................................................................................... 6 2 System test configuration ........................................................................................................................................................ 7 2.1 Justification...................................................................................................................................................................... 7 2.2 Special accessories. ......................................................................................................................................................... 7 2.3 Equipment modifications................................................................................................................................................. 7 2.4 Configuration of the tested system. ................................................................................................................................. 7 2.5 EUT exercise software.....................................................…

Text truncated - open the document above for the full version.

Testing and certification of, consultancy and research concerning, electronic and electric appliances, systems, installations and telecommunication systems TNO Electronic Products & Services (EPS) B.V. P.O. Box 15 9822 ZG Niekerk (NL) Smidshornerweg 18 9822 TL Niekerk (NL) Telephone: +31 594 505005 Telefax: +31 594 504804 E-mail: [email protected] Project number: 03081901.p03 Page 1 of 5 47 CFR PART 15 TEST SETUP PHOTOGRAPHS OF WIRELESS BLUETOOTH HANDY PRINTER, BRAND PANASONIC, MODEL JT-H200PR-**. FCC listed Industry Canada : : 90828 IC3501 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: Wireless Bluetooth Handy Printer Matsushita Electric Industrial Co., Ltd. Panasonic JT-H200PR-** ACJJT-H200PR Project number: 03081901.p03 Page 2 of 5 Description of test item Test item : Wireless Bluetooth Handy Printer Manufacturer : Matsushita Electric Industrial Co., Ltd. Brand : Panasonic Model : JT-H200PR-** Serial numbers : 202009100 Receipt number : 1 Receipt date : September 3, 2003 Applicant information Applicantís representative : Mr. Wouters Company : Telefication b.v. Address : Edisonstraat 12a Postal code : 6902 PK City : Zevenaar PO-box : - Postal code : - City : - Country : The Netherlands Telephone number : +31 (0)316 583180 Telefax number : +31 (0)316 583189 This report is in conformity with NEN-EN-ISO/IEC 17025: 2000. This report shall not be reproduced, except in full, without the written permission of TNO Electronic Products & Services (EPS) B.V. The test results relate only to the item(s) tested. Description of EUT: Manufacturer: Brand mark: Model: FCC ID: Wireless Bluetooth Handy Printer Matsushita Electric Industrial Co., Ltd. Panasonic JT-H200PR-** ACJJT-H200PR Project number: 03081901.p03 Page 3 of 5 Table of contents 1 Radiated emission test setup.................................................................................................................................................... 4 1.1 Radiated emission test setup, (front). .............................................................................................................................. 4 1.2 Radiated emission test setup, (back). .............................................................................................................................. 5 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: Wireless Bluetooth Handy Printer Matsushita Electric Industrial Co., Ltd. Panasonic JT-H200PR-** ACJJT-H200PR Project number: 03081901.p03 Page 4 of 5 1 Radiated emission test setup. 1.1 Radiated emission test setup (front). Description of EUT: Manufacturer: Brand mark: Model: FCC ID: Wireless Bluetooth Handy Printer Matsushita Electric Industrial Co., Ltd. Panasonic JT-H200PR-** ACJJT-H200PR Project number: 03081901.p03 Page 5 of 5 1.2 Radiated emission test setup (back).