AMWUP3202.4 GHz Cordless Phone (FHSS)

QUICK REFERENCE GUIDE [1] www.uniden.com Step 1 Checking the Package Contents Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department. •Base Unit - 1 •Handset - [1 for DCT648] and [2 for DCT648-2] •AC Adapter - [1 for DCT648] and [2 for DCT648-2] •Rechargeable Battery Pack - [1 for DCT648] and [2 for DCT648-2] •Telephone Cord - 1 •Beltclip - [1 for DCT648] and [2 for DCT648-2] •Extra Charger - 1 for DCT648-2 only •Owner's Manual - 1 •Other Printed Material Uniden Parts Department at (800) 554-3988 Hours: M-F 8:00 a.m. to 5:00 p.m. CST. We can also be reached on the web at www.uniden.com Step 2 Install and Charge the Handset Battery TO INSTALL THE HANDSET BATTERY Remove the cover. Connect the battery pack connector with the correct polarity and listen for a click to insure connection. Replace the cover. Plug the AC adapter cord into the base unit and then into a 120V AC outlet. Place the handset in the base and charge continuously for 17 - 20 hours before using the phone. Step 3 Connect to Phone Line When the handset battery pack is fully charged, after 17-20 hours of charging, plug the telephone cord into the base unit and then into a telephone wall jack. QRG_TEL_line QRG_battery_pack QRG_AC_cord QUICK REFERENCE GUIDE [2] QUICK REFERENCE GUIDE www.uniden.com Your phone is set for tone dialing. If your local network requires pulse dialing, please see “D. Choose the dialing mode” on page 13. Step 4 Setting Caller ID & Language Display Options TO SET CALLER ID ON CALL WAITING AND CALL WAITING DELUXE Press menu/del in the standby mode. Press ring/vol/∧ or ring/vol/∨ to select "Global Setup ", and then select/ . Press ring/vol/∧ or ring/vol/∨ to select " CIDCW", and then select/ . Press ring/vol/∧ or ring/vol/∨ to select " CW On/ CWDX On ", "CW On/CWDX Off", or "CW Off/ CWDX Off ", and then select/ . TO SET LANGUAGE Press menu/del in the standby mode. Press ring/vol/∧ or ring/vol/∨ to select " Handset Setup", and then select/ . Press ring/vol/∧ or ring/vol/∨ to select " Language", and then select/ . Press ring/vol/∧ to choose a Language, and then select/ . Step 5 Setting Up the Answering System TO TURN THE ANSWERING SYSTEM ON/OFF Each time answer on/off is pressed, the answer mode is switched between On and Off. TO SET GREETING MESSAGE Press and hold greeting. Start recording your message. Position yourself as near to the base as possible. When finished, press greeting or play/stop. QRG_setup QRG_answering [3] www.uniden.com QUICK REFERENCE GUIDE1 WELCOME/FEATURES4 CONTROLS AND FUNCTIONS6 DISPLAY AND ICONS8 GETTING STARTED9 Setting up the Phone9 Mounting the Base Unit on a Wall14 Main Menu Flow Chart16 About the Menu Setup Options18 Setting Up the Menu Setup Options22 BASICS30 Making and Receiving Calls30 Placing a Call on Hold31 Redialing a Call32 Adjusting the Handset Ringer and Earpiece Volume33 Do Not Disturb (DND)33 Mute Microphone34 Tone Dialing Switch-over34 Traveling Out-of-Range34 Clarity Booster35 Privacy Mode35 Intercom/Call Transfer Feature35 3-Way Conferencing36 Flash and Call Waiting36 PHONEBOOK37 Steps for Entering Names and Special Characters39 Viewing the Phonebook41 Making Calls Using the Phonebook42 Speed Dialing42 Editing or Erasing a Stored Name, Phone Number, Distinctive Ring, and Speed Dial43 Chain Dialing44 CALLER ID AND CIDCW45 Viewing the Caller ID List46 Deleting a Caller ID Message47 Using the Caller ID Message List48 Call Waiting Deluxe Features49 THE INTEGRATED ANSWERING DEVICE50 Turning the Answering System On/Off51 Setting Up your Answering System51 Using your Answering System59 Remote Option62 EXPANDING YOUR PHONE65 Connecting the Charger65 Register the Handset66 Using the DirectLink Mode67 4-Way Conferencing68 Intercom/Call Transfer Feature68 Replacing the Base70 ADDITIONAL INFORMATION71 Changing the Digital Security Code71 Installing the Beltclip71 Headset Installation71 Note on Power Sources72 Maintenance72 General Information73 TROUBLESHOOTING74 Liquid Damage77 PRECAUTIONS & WARRANTY78 I.C. NOTICE80 INDEX81 MEMORY LIST82 Contents [4] WELCOME/FEATURES www.uniden.com Congratulations on your purchase of the Uniden Multi Handset Cordless System telephone. This unit is different from conventional cordless telephones. When the base unit is connected to AC power and a telephone line, it can support up to 4 handsets. Using extra handsets, you can establish a 3-way conference call (2 handsets and an outside line), while two other handsets are making an intercom call. You can now place a fully featured cordless handset anywhere in your home or office where AC power is available to connect the handset chargers. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. As an Energy Star  Partner, Uniden has determined that this product or product models meets the Energy Star  guidelines for energy efficiency. Energy Star  is a U.S. registered mark. Note: Energy Star  applies to DCT646 only. • 2.4GHz Frequency Hopping Spread Spectrum • Integrated Answerring Device (Trilingual Announcement Option) • 4 Multi-Handset Expandability • Hands Free Speakerphone in the Handset • Call Waiting Deluxe • Caller ID/Caller ID On Call Waiting • 100 Dynamic Memory Location (Phonebook & Caller ID) • Trilingual Function Menus (English-French-Spanish) • Intercom/Call Transfer • 20 Distinctive Ring Options (10 ringer tones and 10 melody ringers) • Mute Feature • Flash and Pause • 88 Channel Auto Scan • Handset to Handset Intercoming • DirectLinkTM Mode • Room Monitoring Feature • Battery Level Indicator • Clock Display WELCOME/FEATURES Welcome Features WELCOME/FEATURES [5] www.uniden.com This series features include AutoTalk  and AutoStandby  . AutoTalk allows you to answer a call by just removing the handset from the cradle so you don't have to waste time pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the cradle. To …

Text truncated - open the document above for the full version.

UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648

CONFIDENTIAL PROPERTY OF PCTEST FREQUENCY HOPPING SPREAD SPECTRUM (FHSS), FCC RULE PART 15.247 PCTEST LAB TEST REPORT 15.247 FCC CERTIFICATION REPORT Reviewed by: Quality Manager Filename: 15.230811393.AMW Test Dates: Aug 13-14, 2003 EUT Type: 2.4 GHz Cordless Phone FCC ID: AMWUP320 Page 43 of 49 © 2003 PCTEST Engineering Laboratory, Inc. EXHIBIT B – Labeling Requirements Sample Label & Location New Labeling Requirements Per 2.1074 & 15.19; Docket 95-19 The sample label shown below shall be permanently affixed at a conspicuous location on the device; instruction manual or pamphlet supplied to the user and be readily visible to the purchaser at the time of purchase. However, when the device is so small wherein placement of the label with specified statement is not practical, only the trade name, FCC ID, and the FCC logo must be displayed on the device per Section 15.19 (b)(2). CONFIDENTIAL PROPERTY OF PCTEST FREQUENCY HOPPING SPREAD SPECTRUM (FHSS), FCC RULE PART 15.247 PCTEST LAB TEST REPORT 15.247 FCC CERTIFICATION REPORT Reviewed by: Quality Manager Filename: 15.230811393.AMW Test Dates: Aug 13-14, 2003 EUT Type: 2.4 GHz Cordless Phone FCC ID: AMWUP320 Page 44 of 49 © 2003 PCTEST Engineering Laboratory, Inc. EXHIBIT B – Labeling Requirements (Cont.) Sample Label & Location FCC ID LABEL

UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648

PCTEST ENGINEERING LABORATORY, INC. 6660 – B Dobbin Road • Columbia, MD 21045 • USA Telephone 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com (email: [email protected]) CERTIFICATE OF COMPLIANCE (SAR EVALUATION) PCTEST SAR TEST REPORT FCC CERTIFICATION Reviewed by: Quality Manager SAR Filename: SAR.230811394.AMW Test Dates: Aug. 13-14, 2003 EUT Type: 2.4 GHz Cordless Phone FCC ID: AMWUP320 Page 1 of 23 © 2003 PCTEST Engineering Laboratory, Inc. APPLICANT NAME & ADDRESS: DATE & LOCATION OF TESTING: UNIDEN Engineering Services Dates of Tests: Aug. 13-14, 2003 216 John Street Test Report S/N: SAR.230811394.AMW P.O. Box 580 Test Site: PCTEST Lab, Columbia, MD USA Lake City, SC 29560-0580 FCC ID: AMWUP320 APPLICANT NAME: UNIDEN ENGINEERING SERVICES EUT Type: 2.4 GHz Cordless Phone Tx Frequency: 2401 – 2480 MHz (DSSS) Rx Frequency: 2401 – 2480 MHz (DSSS) Max. RF Output Power: 0.125 W (20.983 dBm) EIRP (Handset) 0.134 W (21.283 dBm) EIRP (Base Set) Max. SAR Measurement: 0.14 W/kg over 1 gm (Head) 0.10 W/kg over 1 gm (Body – Handset) 0.10 W/kg over 1 gm (Body – Base) Trade Name/Model(s): UNIDEN DCT648 FCC Rule Part(s): §15.247, §2.1093; FCC/OET Bulletin 65 Supplement C [July 2001] Application Type: Certification Test Device Serial No.: Identical Prototype [S/N: #1] This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE Std. 1528-200X (Draft 6.5, January 15, 2002). I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Grant Conditions: Power output is EIRP (0.125 W Handset/ 0.134 W Base). This device has been tested for SAR compliance for head and body-worn configurations. SAR compliance for body-worn operating configurations is limited to the specific belt-clip tested for this filing. End-users must be informed of the operating requirements for satisfying RF exposure compliance. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. SAR.230811394.AMW PCTEST SAR TEST REPORT FCC CERTIFICATION Reviewed by: Quality Manager SAR Filename: SAR.230811394.AMW Test Dates: Aug. 13-14, 2003 EUT Type: 2.4 GHz Cordless Phone FCC ID: AMWUP320 Page 2 of 23 © 2003 PCTEST Engineering Laboratory, Inc. TABLE OF CONTENTS 1. INTRODUCTION / SAR DEFINITION.................................................................................3 2. SAR MEASUREMENT SETUP..............................................................................................4 3. ALIDX-500 E-FIELD PROBE SYSTEM..................................................................................5 4. PROBE CALIBRATION PROCESS.......................................................................................6 5. PHANTOM & EQUIVALENT TISSUES.................................................................................7 6. TEST SYSTEM SPECIFICATIONS.........................................................................................8 7. DOSIMETRIC ASSESSMENT & PHANTOM SPECS................................................................9 8. DEFINITION OF REFERENCE POINTS..............................................................................10 9. TEST CONFIGURATION POSITION.................................................................................11 10. ANSI/IEEE C95.1 - 1992 RF EXPOSURE LIMITS.................................................................12 11. MEASUREMENT UNCERTAINTIES...................................................................................13 12. SAR TEST DATA SUMMARY............................................................................................14 13. SAR TEST EQUIPMENT...................................................................................................15 14. CONCLUSION...............................................................................................................16 15. REFERENCES..................................................................................................................17 EXHIBIT A. SYSTEM VERIFICATION.......................................................................................18 EXHIBIT A. SAR DATA SUMMARY...................................................................................19-23 PCTEST SAR TEST REPORT FCC CERTIFICATION Reviewed by: Quality Manager SAR Filename: SAR.230811394.AMW Test Dates: Aug. 13-14, 2003 EUT Type: 2.4 GHz Cordless Phone FCC ID: AMWUP320 Page 3 of 23 © 2003 PCTEST Engineering Laboratory, Inc. 1. INTRODUCTION / SAR DEFINITION The FCC has adopted the guidelines for evaluating the environmental effects of radiofrequency radiation in ET Docket 93-62 on Aug. 6, 1996 to protect the public and workers from the potential hazards of RF emissions due to FCC-regulated portable devices.[1] The safety limits used for the environmental evaluation measurements are based on the criteria published by the American National Standards Institute (ANSI) for localized specific absorption rate (SAR) in IEEE/ANSI C95.1-1992 Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. (c) 1992 by the Institute of Electrical and Electronics Engineers, Inc., New York, New York 10017.[2] The measurement procedure described in IEEE/ANSI C95.3-1992 Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields - RF and Microwave[3] is used for guidance in measuring SAR due to the R…

Text truncated - open the document above for the full version.

UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648

CONFIDENTIAL PROPERTY OF PCTEST FREQUENCY HOPPING SPREAD SPECTRUM (FHSS), FCC RULE PART 15.247 15.230811393.AMW PCTEST ENGINEERING LABORATORY, INC. 6660 – B Dobbin Road • Columbia, MD 21045 • USA Telephone 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com (email: [email protected]) CERTIFICATE OF COMPLIANCE MANUFACTURER NAME & ADDRESS: DATE & LOCATION OF TESTING: UNIDEN Engineering Services Date(s) of Tests: Aug 13-14, 2003 P.O. Box 580 Test Report S/N: 15.230811393.AMW Lake City, SC 29560-0580 Test Site: PCTEST Lab, Columbia, MD FCC ID: AMWUP320 APPLICANT: UNIDEN Engineering Services SUMMARY: Model No.: DCT648 Equipment EUT Type: 2.4 GHz Cordless Phone Max. Output Power: 0.125 W (20.983 dBm) EIRP – Handset 0.134 W (21.283 dBm) EIRP – Base Frequency Range: 2401 – 2480 MHz FCC Classification: FCC Part 15 Spread Spectrum Transceiver (DSS) FCC Rule Part(s): Parts 15.247; ANSI C-63.4-2001 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C-63.4- 2001. Grant Conditions: Power output is EIRP (0.125 W Handset/ 0.134 W Base). This device has been tested for SAR compliance for head and body-worn configurations. SAR compliance for body-worn operating configurations is limited to the specific belt-clip tested for this filing. End-users must be informed of the operating requirements for satisfying RF exposure compliance. I authorize and attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. CONFIDENTIAL PROPERTY OF PCTEST FREQUENCY HOPPING SPREAD SPECTRUM (FHSS), FCC RULE PART 15.247 Page i © 2003 PCTEST Engineering Laboratory, Inc. TABLE OF CONTENTS ATTESTATION STATEMENTS......................................................................................................................................................1 FCC PART 15.247 MEASUREMENT REPORT COVER PAGE..................................................................................................4 1.0 INTRODUCTION..............................................................................................................................................................5 1.1 EVALUATION PROCEDURE......................................................................................................................................5 1.2 SCOPE.......................................................................................................................................................................5 1.3 PCTEST TEST LOCATION...........................................................................................................................................5 2.0 PRODUCT INFORMATION............................................................................................................................................6 2.1 EQUIPMENT DESCRIPTION.......................................................................................................................................6 2.2 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS.......................................................................................................6 3.0 DESCRIPTION OF TEST...................................................................................................................................................7 3.1 CONDUCTED EMISSIONS.........................................................................................................................................7 3.2 RADIATED EMISSIONS..............................................................................................................................................8 4.0 ANTENNA REQUIREMENTS...........................................................................................................................................9 5.0 TEST EQUIPMENT CALIBRATION DATA....................................................................................................................10 6.0 CONCLUSION...............................................................................................................................................................11 EXHIBIT A – TEST RESULTS.......................................................................................................................................................12 SUMMARY.........................................................................................................................................................................12 20DB BANDWIDTH MEASUREMENT (HANDSET).............................................................................................................13 OUTPUT POWER MEASUREMENT....................................................................................................................................19 BAND EDGE COMPLIANCE...............................................................................................................................................25 NUMBER OF HOPPING CHANNELS..................................................................................................................................27 CARRIER FREQUENCY SEPARATION.................................................................................................................................28 DWELL TIME......................................................................................................................................................................30 TIME OF OCCUPANCY (DWELL TIME)....................…

Text truncated - open the document above for the full version.

UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648 UNIDEN FCC ID: AMWUP320 EUT Photographs © 2003 PCTEST Lab. 2.4 GHz Cordless Phone Model: DCT648