AMWUS207TRAX438

Page4 What Do I Do First? Make sure everything is OK If anything listed here is missing or damaged, call Customer Service (see back cover for contact information). TRAX436OR TRAX438 GPSNAVIAAGATIONDEVICE The parts you’ll use most often are in large type. Connectors for optional accessories are shown in italics. Press the power button to turn off the screen; the device stays on and can still give directions. T o turn the device completely off, press the power button in and hold it for three seconds. Ź Ź Ź Ź GPS antenna (extended) USB port for software updates Jack for external headset Connection for external antenna Power connection Power button GPS antenna (extended) USB port for software updates Jack for external headset Connection for external antenna Power connection Power button Page 5 What Do I Do First? WINDSHIELDMOUNT The device attaches to the bracket, and the suct ion cup holds the mount in your windshield. Some states have laws against putting things in your car’s windshield. If you don’t know the laws for your state, contact the RI¿FHWKDWLVVXHVGULYHUV¶OLFHQFHV If you do put the device in your windshield, don’t forget to lock it up or take it with you when you leave your car. INCLUDEDACCESSORIES For information on other available accessories, see page XREF. Ź Ź Ź Suction latch Bracket lock Suction cup pull tab Bracket Suction cup Adjustment lock Suction latch Bracket lock Suction cup pull tab Bracket Suction cup Adjustment lock Car power adapter (12 Volt DC) USB cable (for map updates) Adhesive anchor disk Car power adapter (12 Volt DC) USB cable (for map updates) Adhesive anchor disk Page 6 What Do I Do First? Plug it in Only use the power adapter that came with your device. Any other adapter might damage the device. Whenever it senses power coming in, the device turns itself on and charges the battery. As soon as the power stops (for example, when you unplug the adapter or turn off your car), the device automatically shuts down. If you want it to stay on, tap an ywhere on the screen during the Shutting down message. You can turn the device on or off anytime you want: just push the power button on top of the device to turn it on, and hold the button for three seconds to turn it off. Ź Ź Ź Ź 2 Plug the other end into your car’s cigarette lighter. Plug the adapter into the power connector on the lower right side of the device. 1 2 Plug the other end into your car’s cigarette lighter. Plug the adapter into the power connector on the lower right side of the device. 1 Page 7 What Do I Do First? Choose your default language 7KH¿UVWWLPH\RXWXUQRQWKHGHYLFHLWDVNV\RXZKLFK language you want to use for menus and voice prompts. Tap the line with the lanuguage you want to use, or tap the down arrow to see more choices. The device will use that language from now on. You can always change the language later from the Settingsmenu. See page 64. Set your time preferences From the main menu screen, select . SelectLANGUAGEANDLOCALE and then SETTIMEAND TIMEZONE. This opens the following screen. 1 ) 2) Page 8 What Do I Do First? Tap the button in the TIME ZONE¿HOGWRRSHQWKHSelect a Time Zone screen. Tap anywhere on the world map to use the time zone for that location. Tap the + arrow to zoom in or the - arrow to zoom out. Tap and drag on the screen to move to a different part of the map. Tap OKZKHQ\RX¶UH¿QLVKHG Set daylight savings time. If you want the device to automatically adjust the clock for daylight savings time, tap the button in the DAYLIGHT SAVING ¿HOGXQWLOLWVKRZVAUTO. If your area never uses daylight savings time, tap the DAYLIGHT SAVING button until it shows OFF. If you want to control the clock adjustment manually, use ON when your area is observing daylight savings time andOFFwhen your area is not. Tap the button in the UNITS¿HOGWRVHWWKHWLPHIRUPDW you want to use. Use 12 HR for twelve-hour (am/pm) time or 24 HR for twenty-four-hour (military) time. If necessary, use the arrows on the clock to adjust the hours, minutes, and am/pm to show the current time. Tap OKZKHQ\RX¶UH¿QLVKHGWKHQBACK to return to the menu. 3) Ź Ź Ź 4) Ź Ź Ź 5) 6) 7) Page 9 What Do I Do First? Enter your home location Next, enter the address you want to use as your “home” location, that is, the place you travel to and from the most. (This step isn’t actually required, so you can skip it if you want. But the home feature is so useful that you’ll be glad you entered it!) From the main menu, choose NAVIGATE TO ADDRESS. This opens the state selection screen: Tap the state where your home location is. Tap the + arrow to zoom in or the - arrow to zoom out. Tap and drag on the screen to move to a different part of the map. If you want to choose the state by zip code, tap the ZIP CODE button to enter your destination’s zip code. (This takes you to the number keypad on the next page.) If you want to choose the state by name, tap the SPELL button to enter the name of the state. (This takes you straight to the alphabet keypad on the next page.) For the US, there are 53 available states: all 50 states, Puerto Rico, the US Virgin Islands, and the District of Columbia. Use the aphabet keypad to enter the name of the city (or unincorporated area) where your home location is. (You don’t have to enter the whole name.) 1) Ź Ź Ź Ź 4) Page 10 What Do I Do First? The device searches for names that include the entered characters. For example, if you choose Texas and enter F ORTWKHGHYLFH¿QGVTTComfortandt Wolffortffhttalong with names that begin with FORT. If you enter a space after F ORTWKHGHYLFH¿QGVQDPHVZKHUHWKRVHOHWWHUVDUHTT followed by a space (Fort Davis, Fort Worth, etc.) If you need to type a letter with an accent or diacritical mark, tap the ÔÑËbutton to go to the symbol keypad. If you need to type a number or any kind of punctuation mark, tap the $12button to go to the number keypad. To go back to the alphabet keypad, tap the ABC button. Tap the OKEXWWRQZKHQ\RXDUH¿QLVKHG…

Text truncated - open the document above for the full version.

REQUEST FOR CONFIDENTIALITY December 10, 2007 To: Federal Communications Commission Equipment Authorization Branch Laboratory Division Office of Engineering and Technology 7435 Oakland Mills Road Columbia, Maryland 21046 Subject: Data for FCC Certification Applicant: Uniden America Corporation 181 N. Country Club Road, P.O. Box 580 Lake City, South Carolina 29560 James R. Haynes, Vice President, Engineering and Regulatory Affairs TYPE OF EQUIPMENT: Part 15 Intentional Radiator FCC IDENTIFIER: AMWUS207 Dear Sir or Madam: Some of the material included in this application contains trade secrets and proprietary information not customarily released to the public. Because public disclosure of the material might be harmful to the applicant and provide unjustified benefits to its competitors, it is requested that the following be withheld from public disclosure: Circuit Description Schematic Diagrams Block Diagrams Trade secrets and proprietary information can be held confidential. Therefore, we wish to invoke the act under the provisions of 47CFR, Sections 0.457(d) and 0.459. Please contact the undersigned if you have any questions or need any further information. Regards, James R. Haynes Vice President, Engineering and Regulatory Affairs

LIMITED AGENCY AGREEMENT December 10, 2007 Nemko Canada Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 RE: Equipment Authorization for FCC Certification We, Uniden America Corporation (hereinafter “Uniden”), hereby authorize Nemko USA Inc., located at 802 North Kealy in Lewisville, Texas 75057, to act as our agent for the purpose of testing and preparing an equipment authorization application for our device identified by the FCC Identifier Number AMWUS207 under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is December 10, 2007. This limited agency agreement expires on December 10, 2008, unless sooner terminated or extended by written notice to Nemko USA and the Federal Communications Commission. Uniden certifies that equipment manufactured, imported, or marketed under the FCC ID: AMWUS207 will comply to the parameters established in the application for equipment authorization unless the changes are in full compliance to the provisions in Part 2 of the FCC rules that allow such changes. This is to advise that Uniden is in full compliance with the Anti-Drug Abuse Act. Uniden is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Regards, James R. Haynes Vice President, Engineering and Regulatory Affairs

Uniden DHQ Confidential 2D-F1 TRAX430 TRAX430_dhq052207 Date 05.22.07 File Uniden America Corporation units = mm scale = full UAC approved - updates in RED- changed paint color of rear parts to be light color because of operating temperature issues- updated Uniden logo on BOTTOM DECO PART to be print not engraving <TOUCH SCREEN LCD>4.3 Inch Visible Area <LED LENSES>Material: PlasticColor: ClearTexture: HN3006G (Frontside)LED Color: Blue <BOTTOM DECO PART>Material: plasticColor: UJ ChoicePaint Color: Black Rubber PaintPrint Color: pms877c (silver)Texture: None <TOP DECO PART>Material: plasticColor: UJ ChoicePaint Color: Black Rubber PaintPrint Color: pms877c (silver) Texture: None<POWER BUTTON>Material: PlasticColor: UJ ChoicePaint Color: C-0582 (silver)Texture: NoneEngraving: Recessed <CASE FRONT>Material: plasticColor: Black C-0001Paint : Gloss BlackTexture: Polish <ANTENNA TOP COVER>Material: plasticColor: UJ ChoicePaint Color: C-0582 (silver) Print Color: pms cool gray 9c Texture: None <ANTENNA BOTTOM COVER>Material: plasticColor: UJ ChoicePaint Color: C-0582 (silver) Texture: None <CASE REAR>Material: plasticColor: UJ ChoicePaint Color: C-0582 (silver) Print Color: pms cool gray 9c Texture: None <CASE REAR SCREWS (x4)>Color: Silver connector and print are for TRAX435 only

ID Label/Location Info The FCC Label complies with the section 2.925(d) of the FCC Rules and will be placed at rear of enclosure cabinet so that this label will be readily visible at the time of purchase. 1) Rating label: 30 mm (W) x 20 mm (H) 2) STATEMENT label: 31 mm (W)

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Maximum peak eirp:-12.90(dBm) Maximum peak eirp:0.051286138(mW) Time Averaging:100(%) Prediction distance:20(cm) Prediction frequency:2450(MHz) MPE limit for uncontrolled exposure at prediction frequency:1(mW/cm^2) Power density at prediction frequency:0.000010(mW/cm^2) Margin of compliance:-49.9(dB) 2 4R PG S π =

Nemko Test Report: 9299RUS1rev3 Applicant: Uniden America 4700 Amon Carter Blvd. Fort Worth, TX 76155 USA Equipment Under Test: TRAX438 (E.U.T.) (FCC ID: AMWUS207) In Accordance With: FCC Part 15, Subpart C, 15.247 Frequency Hopping Transmitters Tested By: Nemko USA Inc. 802 N. Kealy Lewisville, Texas 75057-3136 TESTED BY: DATE: 14 December 2007 David Light, Senior Wireless Engineer APPROVED BY: DATE: 26 December 2007 Tom Tidwell, Telecom Direct Total Number of Pages: 41 Nemko USA, Inc. FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER EQUIPMENT: TRAX438 PROJECT NO.: 9299RUS1rev3 Page 2 of 41 Table of Contents SECTION 1. SUMMARY OF TEST RESULTS 3 SECTION 2. EQUIPMENT UNDER TEST (E.U.T.) 5 SECTION 3. POWERLINE CONDUCTED EMISSIONS 7 SECTION 4. CHANNEL SEPARATION 13 SECTION 5. TIME OF OCCUPANCY 18 SECTION 6. PEAK POWER OUTPUT 24 SECTION 7. SPURIOUS EMISSIONS (RADIATED) 25 SECTION 8. TEST EQUIPMENT LIST 29 ANNEX A - TEST DETAILS 30 ANNEX B - TEST DIAGRAMS 39 Nemko USA, Inc. FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER EQUIPMENT: TRAX438 PROJECT NO.: 9299RUS1rev3 Page 3 of 41 Section 1. Summary of Test Results Manufacturer: Uniden America Model No.: TRAX438 Serial No.: None General: All measurements are traceable to national standards. These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 15, Subpart C, Paragraph 15.247 for Frequency Hopping Spread Spectrum devices. Radiated tests were conducted is accordance with ANSI C63.4-2003. Radiated emissions are made on an open area test site. A description of the test facility is on file with the FCC. New Submission Production Unit Class II Permissive Change Pre-Production Unit THIS TEST REPORT RELATES ONLY TO THE ITEM(S) TESTED. THE FOLLOWING DEVIATIONS FROM, ADDITIONS TO, OR EXCLUSIONS FROM THE TEST SPECIFICATIONS HAVE BEEN MADE. See “ Summary of Test Data”. Nemko USA Inc. authorizes the above named company to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. Nemko USA, Inc. is a NVLAP accredited laboratory. Nemko USA, Inc. FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER EQUIPMENT: TRAX438 PROJECT NO.: 9299RUS1rev3 Page 4 of 41 Summary Of Test Data NAME OF TEST PARA. NO. RESULT Powerline Conducted Emissions 15.207(a) Complies Channel Separation 15.247(a)(1) Complies Time of Occupancy 15.247(a)(1) Complies 20 dB Occupied Bandwidth 15.247(a)(1) Complies Peak Power Output 15.247(b) Complies Spurious Emissions 15.247(d) Complies Footnotes: All tests were performed radiated. The EUT has an integral antenna. Nemko USA, Inc. FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER EQUIPMENT: TRAX438 PROJECT NO.: 9299RUS1rev3 Page 5 of 41 Section 2. Equipment Under Test (E.U.T.) General Equipment Information Frequency Band: 902 – 928 MHz 2400 – 2483.5 MHz 5725 – 5850 MHz Operating Frequency Range: 2402 to 2480 MHz Number of Channels: 79 Channel Spacing: 1 MHz 20 dB Bandwidth: 962 kHz max User Frequency Adjustment: None Nemko USA, Inc. FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER EQUIPMENT: TRAX438 PROJECT NO.: 9299RUS1rev3 Page 6 of 41 Description of EUT Bluetooth device embedded in a GPS navigation device. System Diagram Nemko USA, Inc. FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER EQUIPMENT: TRAX438 PROJECT NO.: 9299RUS1rev3 Page 7 of 41 Section 3. Powerline Conducted Emissions NAME OF TEST: Powerline Conducted Emissions PARA. NO.: 15.207(a) TESTED BY: David Light DATE: 13 December 2007 Test Results: Complies. The worst case emission was 42.87 dBμV at 663.2 kHz. This is 3.13 dB below the average specification limit of 46 dBμV. Test Data: Refer to attached plots Equipment Used: 1036-674-1120-1188 Measurement Uncertainty: +/- 1.7 dB Temperature: 21 °C Relative Humidity: 33 % Nemko USA, Inc. FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER EQUIPMENT: TRAX438 PROJECT NO.: 9299RUS1rev3 Page 8 of 41 Test Data – Powerline Conducted Emissions L1 Peak Nemko USA, Inc. FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER EQUIPMENT: TRAX438 PROJECT NO.: 9299RUS1rev3 Page 9 of 41 Test Data – Powerline Conducted Emissions L1 Average Nemko USA, Inc. FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER EQUIPMENT: TRAX438 PROJECT NO.: 9299RUS1rev3 Page 10 of 41 Test Data – Powerline Conducted Emissions L2 Peak Nemko USA, Inc. FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER EQUIPMENT: TRAX438 PROJECT NO.: 9299RUS1rev3 Page 11 of 41 Test Data – Powerline Conducted Emissions L2 Average Nemko USA, Inc. FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER EQUIPMENT: TRAX438 PROJECT NO.: 9299RUS1rev3 Page 12 of 41 Test Setup Photos – Powerline Conducted Emissions Nemko USA, Inc. FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER EQUIPMENT: TRAX438 PROJECT NO.: 9299RUS1rev3 Page 13 of 41 Section 4. Channel Separation NAME OF TEST: Channel Separation PARA. NO.: 15.247(a)(1) TESTED BY: David Light DATE: 13 December 2007 Test Results: Complies. Measurement Data: See 20 dB BW plot Measured 20 dB bandwidth: 962 kHz max Channel Separation: 1 MHz Equipment Used: 1036-1082-802 Measurement Uncertainty: 1X10 -7 ppm Temperature: 21 °C Relative Humidity: 33 % Nemko USA, Inc. FCC PART 15, SUBPART C FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER EQUIPMENT: TRAX438 PROJE…

Text truncated - open the document above for the full version.