
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
C onveCtion M iCrowave D rawer SMD2499FS OPERATION MANUAL CONVECTION MICROWAVE DRAWER MODEL: SMD2499FS CUSTOMER ASSISTANCE .........................................2 CONSUMER LIMITED WARRANTY................................3 PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY .............................................4 IMPORTANT SAFETY INSTRUCTIONS ..........................5-6 INFORMATION YOU NEED TO KNOW ...........................7-9 PART NAMES..... .............................................10-11 BEFORE OPERATING ..............................................12 CONNECTING YOUR APPLIANCE ................................13 MICROWAVE DRAWER ™ COOKING ..........................14-19 OTHER FEATURES ............................................20-21 CLEANING AND CARE ............................................22 BEFORE YOU CALL FOR SERVICE ...............................23 AUTO-TOUCH GUIDE .............................27-BACK COVER CUSTOMER ASSISTANCE UNITED STATES ONLY REGISTER YOUR PRODUCT Registering your new product is easy and offers benefits that help you get the most out of your Sharp product including: 9Convenience: If you ever need warranty support, your product information is already on file. 9Communication: Stay up to date with important notifications and special offers from SHARP. 9Support: Quickly access support content including Owner’s Manuals, FAQ’s, How-to Videos, and much more. 3 EASY WAYS TO REGISTER TODAY! PRODUCT SUPPORT If you have questions about the setup or operation of your product, please refer to the corresponding section within this manual. Additionally, visit www.sharpusa.com/support to access exclusive content about your product including: ÆFAQ’s and How-To Videos ÆFind or Request Service ÆPurchase an Extended Warranty ÆDownloads including the Installation Guide, Spec Sheet, and Owner’s Manual CONTACT US If at any time you have questions or comments concerning your SHARP product, please contact the SHARP Customer Assistance Center. We are available to assist you through multiple contact methods for your convenience: Scan this QR Code on your mobile deviceVisit http://www.sharpusa.com/register ONLINE Visit our sites to learn more about your product at sharpusa.com and sbl.sharpusa.com See the Contact Us section on our sitesU.S. | www.sharpusa.com/supportContact a Sharp Advisor on the phone Contact a Sharp Advisor on the phone CALL US US 800-BE-SHARP 800-237-4277 Mon-Fri: 7am-7pm CST Sat-Sun: 9am-7pm CST CALL US US 800-BE-SHARP 800-237-4277 Mon-Fri: 7am-7pm CST Sat-Sun: 9am-7pm CST EMAIL Available 24/7 US: sharpusa.com CHAT ONLINE Mon-Fri: 7am-7pm CST Sat-Sun: 9am-7pm CST SCAN Use the camera or QR code scanning application on your mobile device 2 CONSUMER LIMITED WARRANTY 3 SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described above on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incident or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO. Your product model number & description: SMD2499FS or Home Use Convection Microwave Drawer. (Be sure to have this information available when you need service for your Product.) Warranty period for this product: One (1) year parts and labor including in-home service. The warranty period continues for an additional four (4) years, for a total of five (5) years, with respect to the magnetron tube in the Product for parts only; labor and service are not provided free of charge for this additional period. Additional item(s) excluded from warranty coverage (if any): Non-functional accessori…
Text truncated - open the document above for the full version.
3505 Francis Circle Alpharetta, GA 30004 PH: 770-740-0717 www.ustech-lab.com Request for Confidentiality Date: October 21, 2020 Subject: Confidentiality Request for: FCC ID: APYDMR0180 Pursuant to FCC 47 CRF 0.457(d) and 0.459, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Parts List Sharp Manufacturing Company has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Sincerely, By: __________________________ ___Sandi McEnery__- Agent (Signature/Title) (Print name)
US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 1 of 4 External Photographs Figure 1. EUT Front US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 2 of 4 Figure 2. EUT Right Side US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 3 of 4 Figure 3. EUT Back US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 4 of 4 Figure 4. EUT Left Side
US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Sample Label and Location Figure 1. Sample Label Figure 2. Label location
US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 1 of 13 Internal Photographs Figure 1. EUT Left Side US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 2 of 13 Figure 2. EUT Back Side US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 3 of 13 Figure 3. EUT Right Side US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 4 of 13 Figure 4. EUT Top Side US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 5 of 13 Figure 5. Mitsuoka Switching Power Supply- Top Side US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 6 of 13 Figure 6. Mitsuoka Switching Power Supply- Bottom Side US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 7 of 13 Figure 7. Tamura Switching Power Supply- Top Side US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 8 of 13 Figure 8. Tamura Switching Power Supply- Bottom Side US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 9 of 13 Figure 9. Magnetron for SMD2499FSC US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 10 of 13 Figure 10. Control Panel/Keypad Assembly US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 11 of 13 Figure 11. Control Panel/Keypad Assembly Main PCBA US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 12 of 13 Figure 12. Wi-Fi Module Location in Microwave US Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corp Model: SMD2499FSC Page 13 of 13 Figure 13. Wi-Fi Module
Page 1 of 43 CFR 47 Part 18 Industrial Scientific and Medical Equipment Subpart C Technical Standards, Part 18.305, Field Strength Limits and Part 18.307, Conducted limits Certification Report for the Sharp Corporation Convection Microwave Oven Drawer Model: SMD2499FSC FCC ID: APYDMR0180 Test Dates: September 29- October 9, 2020 Issue Date: October 16, 2020 UST Project No: 20-0238 Total Number of Pages Contained Within this report: 43 3505 Francis Circle Alpharetta, GA 30004 PH: 770-740-0717 Fax: 770-740-1508 www.ustech-lab.com Page 2 of 43 I certify that I am authorized to sign for the manufacturer and that all of the statements in this report and in the exhibits attached hereto are true and correct to the best of my knowledge and belief: US Tech (Agent responsible for test): By: _________________ Name: Alan Ghasiani Title: President – Consulting Engineer Date: October 16, 2020 TESTING NVLAP LAB CODE 200162-0 This report shall not be reproduced except in full. This report may be copied in part only with the prior written approval of US Tech. The results contained in this report are subject to the adequacy and representative character of the sample provided. US Tech NVLAP accreditation does not allow product endorsement by NVLAP or any agency of the U.S. Government. 3505 Francis Circle Alpharetta, GA 30004 PH: 770-740-0717 Fax: 770-740-1508 www.ustech-lab.com US Tech Test Report: FCC Part 18 Subpart C Certification Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corporation FCC ID: APYDMR0180 Model: SMD2499FSC Page 3 of 43 Table Of Contents Title Paragraph Page 1 General Information ..................................................................................................... 6 1.1 Purpose of the Report ............................................................................................ 6 1.2 Product Description ................................................................................................ 6 1.3 Related Submittal(s)/Grant(s)................................................................................. 6 1.4 Test Methodology ................................................................................................... 7 1.5 Test Facility ............................................................................................................ 7 1.6 Test Equipment ...................................................................................................... 8 2 System Test Configuration ........................................................................................... 9 2.1 Characterization of Sample Tested ........................................................................ 9 2.2 EUT Exercise Software .......................................................................................... 9 2.3 Special Accessories ............................................................................................... 9 2.4 Test Rationale ........................................................................................................ 9 2.5 Tested System Details ........................................................................................... 9 2.6 Configuration of Tested System ........................................................................... 10 2.7 Equipment Modifications ...................................................................................... 11 2.8 Test Results ......................................................................................................... 11 2.9 Measurement Uncertainty .................................................................................... 12 2.9.1 Conducted Emissions Measurement Uncertainty .......................................... 12 2.9.2 Radiated Emissions Measurement Uncertainty ............................................. 12 3 Power Line Conducted Emissions Data (47 CFR 18.307) ......................................... 12 3.1 Test Site Description ............................................................................................ 12 4 Radiated Emissions Data (47 CFR 18.301, 18.303, 18.305) ..................................... 15 4.1 Test Site Description ............................................................................................ 15 4.2 Test Limits/Calculations ....................................................................................... 17 4.2.1 Part 18 ISM Test Limits ................................................................................. 17 4.2.2 General Field Strength Calculation ................................................................ 18 5 Variation in Operating Frequency ............................................................................... 29 5.1 Variation in Operating Frequency Over Time (Mitsuoka switching power supply) 29 5.2 Variation in Operating Frequency with Line Voltage ............................................ 31 5.3 Variation in Operating Frequency Over Time (Tamura Switching Power Supply) 34 5.4 Variation in Operating Frequency with Line Voltage ............................................ 36 6 EUT Power measurements ........................................................................................ 39 6.1 Output Power measurements............................................................................... 39 6.2 Input Power .......................................................................................................... 40 7 Radiation Hazard Measurement................................................................................. 41 8 Test Results ............................................................................................................... 43 US Tech Test Report: FCC Part 18 Subpart C Certification Report Number: 20-0238 Issue Date: October 16, 2020 Customer: Sharp Corporation FCC ID: APYDMR0180 Model: SMD2499FSC Page 4 of 43 List of Tables Table 1. Test Equipment .....................................…
Text truncated - open the document above for the full version.
Us Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16,2020 Customer: Sharp Corp Model: SMD2499FSC Figure 1. Radiated Emissions Measurement Photo Close-up (both Power Supplies) Us Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16,2020 Customer: Sharp Corp Model: SMD2499FSC Figure 2. Radiated Emissions Measurement Photo, 30 to 200 MHz (both Power Supplies) Us Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16,2020 Customer: Sharp Corp Model: SMD2499FSC Figure 3. Radiated Emissions Measurement Photo, 200 to 1000 MHz (both Power Supplies) Us Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16,2020 Customer: Sharp Corp Model: SMD2499FSC Figure 4. Radiated Emissions Measurement Photo, above 1000 MHz (both Power Supplies) Us Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16,2020 Customer: Sharp Corp Model: SMD2499FSC Figure 5. Output Power Test Configuration (both Power Supplies) (Data logger used to measure the water temperature before and after testing) Us Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16,2020 Customer: Sharp Corp Model: SMD2499FSC Figure 6. Input Power Test Configuration (both Power Supplies) (Power Analyzer used to measure the voltage & current draw) Us Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16,2020 Customer: Sharp Corp Model: SMD2499FSC Figure 7. Frequency/Voltage Variation Test Configuration (both Power Supplies) Us Tech Test Report: FCC Part 18 Subpart C FCC ID: APYDMR0180 Test Report Number: 20-0238 Issue Date: October 16,2020 Customer: Sharp Corp Model: SMD2499FSC Figure 8. Conducted Emissions Measurement Photo (both Power Supplies)
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 18 | 2.45 GHz - 2.45 GHz | - |
Smart phone
Equipment Class
NII - Unlicensed National Information Infrastructure TXSmartphone
Equipment Class
DTS - Digital Transmission SystemSmart phone
Equipment Class
DXX - Part 15 Low Power Communication Device TransmitterSmart phone
Equipment Class
DTS - Digital Transmission SystemBT remote control
Equipment Class
DTS - Digital Transmission System