APYHRO00168Cellular Phone

6 Contents/Precautions  Before use, read these “Precautions” carefully and use your handset properly.  Keep this manual in a safe place for future reference.  These precautions contain information intended to prevent bodily injury to the user and to surrounding people, as well as damage to property, and must be observed at all times. The following symbols indicate the different degrees of injury or damage that may occur if information provided is not observed and the handset is used improperly. The following symbols indicate specific directions. Precautions (ALWAYS FOLLOW THESE DIRECTIONS) Danger This symbol indicates that “death or serious bodily injury may directly and immediately result from improper use”. Warning This symbol indicates that “death or serious bodily injury may result from improper use”. Caution This symbol indicates that “minor injury and/or property damage may result from improper use”. Indicates a prohibited action.Indicates not to disassemble the device.Indicates not to handle the device with wet hands.Indicates not to use the device near water or get it wet.Indicates that instructions specified are compulsory (must be followed).Indicates that the power cord must be unplugged from the outlet. 2 7 Contents/Precautions “Precautions” is explained in the following seven sections. Handling the handset, battery pack, adapters (including charger micro USB adapter), desktop holder and docomo mini UIM card  (general) . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 7  Handling the handset . . . . . . . . . . . . . . . . . . P. 8  Handling battery pack . . . . . . . . . . . . . . . . . P. 11  Handling adapters (including charger micro USB adapter) and desktop holder . . . . . . . . . . . . P. 12  Handling docomo mini UIM card . . . . . . . . . P. 13  Handling near electronic medical equipment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 13  Viewing 3D images . . . . . . . . . . . . . . . . . . . P. 14 Do not use, store or leave the equipment in locations subject to high temperatures, such as near a fire, in direct sunlight or inside a vehicle on a hot day. May cause fires, burns or bodily injury. Do not place the equipment inside cooking appliances such as microwave ovens or pressure cookers. May cause fires, burns, bodily injury or electric shock. Do not attempt to disassemble or modify the equipment. May cause fires, burns, bodily injury or electric shock. Do not get the equipment wet with water, drinking water, pet urine, etc. May cause fires, burns, bodily injury or electric shock.Refer to the following for details on waterproofness.n “Waterproof/Dust-proof” on P. 21 Use only the battery packs and adapters (including charger micro USB adapter) specified by NTT DOCOMO for use with the handset. May cause fires, burns, bodily injury or electric shock. Do not subject the equipment to strong force or impacts or throw it. May cause fires, burns, bodily injury or electric shock. Do not allow conductive materials (such as metal objects and pencil lead) to come into contact with the charger terminal, external connector terminal or earphone/microphone terminal. In addition, do not insert such objects. May cause fires, burns, bodily injury or electric shock. Do not cover or wrap the equipment with bedding, etc. when using or charging. May cause fires or burns. Handling the handset, battery pack, adapters (including charger micro USB adapter), desktop holder and docomo mini UIM card (general) Danger Warning 3 8 Contents/Precautions Be sure to turn off the handset and not to charge the battery in locations such as gas stations where flammable gas is generated. May cause a gas explosion or fire.To use Osaifu-Keitai in locations such as gas stations, be sure to turn off the power in advance (If the Osaifu-Keitai lock setting is ac tivated, disable the lock before turning off the power). If you notice anything unusual, such as an unusual odor, overheating, discoloration or deformation during use, charging or storage, immediately follow the instructions below.  Unplug the power cord from the outlet or cigarette lighter socket.  Turn off the handset.  Remove the battery pack from the handset. May cause fires, burns, bodily injury or electric shock. Do not leave the equipment on unstable surfaces, such as on a wobbly table or sloped surface. May fall and cause injury. Do not store the equipment in locations that are subject to humidity, dust or high temperatures. May cause fires, burns or electric shock. If being used by a child, have a guardian teach him/her the proper handling procedures. In addition, check that the child is using the equipment as directed. May result in bodily injury. Keep the equipment out of the reach of young children. A young child may swallow the equipment or suffer other bodily injury. Be very careful when using the handset connected to adapters (including charger micro USB adapter) repeatedly or for long periods of time. The handset, battery pack or adapters (including charger micro USB adapter) may become warm if 1Seg etc. is used for a long time while charging.Touching high temperature areas for a prolonged period of time may cause skin irritations, itchiness or low-temperature burns in some people. Do not aim the infrared port towards the eyes. May cause eye injury. Do not aim the infrared port towards home electric appliances with an infrared device during infrared communication. May interfere with the operation of infrared devices and cause an accident. Caution Handling the handset Warning 4 10 Contents/Precautions If you are using electronic medical equipment, contact the respective manufacturer or dealer to check whether the operation of the equipment is affected by signals. May interfere with the operation of electronic medical equipment, etc. Turn off the handset near high-precision electronic devices or devices that use weak electronic signals. May interfere with the operation of electronic devices.Take…

Text truncated - open the document above for the full version.

175 Appendix/Index The abbreviations of operating systems (Japanese versions) below are used in this manual. Windows 7 stands for Microsoft ® Windows ® 7 (Starter, Home Basic, Home Premium, Professional, Enterprise and Ultimate). Windows Vista stands for Windows Vista ® (Home Basic, Home Premium, Business, Enterprise and Ultimate). Windows XP indicates the Microsoft ® Windows ® XP Professional operating system or Microsoft ® Windows ® XP Home Edition operating system. The Bluetooth word mark and logos are owned by the Bluetooth SIG, INC. and any use of such marks by NTT DOCOMO, INC. is under license. Other trademarks and trade names are those of their respective owners. Google, Google logo, Android, Android Market, Gmail, Google Maps, Google Talk, Google Maps Navigation, Google Latitude, Google Places, Google Voice Search, YouTube, and YouTube logo are trademarks or registered trademarks of Google Inc. Mercury 3D is a generic name of 3D conversion technology of Mercury System Co.,Ltd. The authorization by Mercury System Co.,Ltd. ([email protected]) is required to convert still image received from other media (except still pictures taken by the handset) to 1920 × 1080 pixels or bigger 3D image for commercial use. Eco Backlight Control uses Assertive Display technology by Apical Limited. This product contains Audio Enhancement technology by AM3D.

Model Name:SH-07D FCC ID: APYHRO00168 Photo(External)13/April/2012 1 / 2 Model Name:SH-07D FCC ID: APYHRO00168 Photo(External)13/April/2012 2 / 2

25/April/2012 Model Name: SH-07D FCC ID: APYHRO00168 ○Spec Label Vendor : NTT DoCoMo ① Color ② Approval Number of JATE ③ Certification Number of TELEC ④ Production Years & Months ⑤ Bar Code of IMEI ⑥ IMEI (Production Serial Number) Caution : Turn off power in an aircraft. Don't remove this seal. Manufucturer/Applicant : SHARP Corporation Country of production ○Location Spec Label and Location FCC ID

Model Name:SH-07D FCC ID: APYHRO00168 Photo(Internal)13/April/2012 1 / 4 Model Name:SH-07D FCC ID: APYHRO00168 Photo(Internal)13/April/2012 2 / 4 Model Name:SH-07D FCC ID: APYHRO00168 Photo(Internal)13/April/2012 3 / 4 Model Name:SH-07D FCC ID: APYHRO00168 Photo(Internal)13/April/2012 4 / 4

JAPAN QUALITY ASSURANCE ORGANIZATION Page 1 of 27 JQA File No. : KL80110730 Issue Date : April 23, 2012 TEST REPORT APPLICANT : Sharp Corporation, Communication Systems Group ADDRESS : 2-13-1, Iida Hachihonmatsu, Higashi-Hiroshima City, Hiroshima, 739-0192, JAPAN PRODUCTS : Cellular Phone MODEL NO. : SH-07D SERIAL NO. : 004401113925321 FCC ID : APYHRO00168 TEST STANDARD : CFR 47 FCC Rules and Regulations Part 15 TESTING LOCATION : Japan Quality Assurance Organization KITA-KANSAI Testing Center 1-7-7, Ishimaru, Minoh-shi, Osaka 562-0027, Japan TEST RESULTS : Passed DATE OF TEST : April 11 ~ 17, 2012 Kousei Shibata Manager Japan Quality Assurance Organization KITA-KANSAI Testing Center Testing Dept. SAITO EMC Branch 7-3-10, Saito-asagi, Ibaraki-shi, Osaka 567-0085, Japan ● The measurement values stated in Test Report was made with traceable to National Institute of Advanced Industrial Science and Technology (AIST) of Japan and National Institute of Information and Communications Technology (NICT) of Japan. ● The applicable standard, testing condition and testing method which were used for the tests are based on the request of the applicant. ● The test results presented in this report relate only to the offered test sample. ● The contents of this test report cannot be used for the purposes, such as advertisement for consumers. ● This test report shall not be reproduced except in full without the written approval of JQA. ● VLAC does not approve, certify or warrant the product by this test report. VLAC-001-2 JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80110730 Issue Date : April 23, 2012 Model No. : SH-07D FCC ID : APYHRO00168 Regulation : CFR 47 FCC Rules and Regulations Part 15 Page 2 of 27 TABLE OF CONTENTS Page Documentation ................................................................................................................................................. 3 1 Test Regulation......................................................................................................................................3 2 Test Location..........................................................................................................................................3 3 Recognition of Test Laboratory.............................................................................................................3 4 Description of the Equipment Under Test...........................................................................................4 5 Test Condition........................................................................................................................................5 6 Preliminary Test and Test Setup.........................................................................................................7 7 Equipment Under Test Modification..................................................................................................12 8 Responsible Party................................................................................................................................12 9 Deviation from Standard.....................................................................................................................12 10 Test Results..........................................................................................................................................13 11 Summary..............................................................................................................................................16 12 Operating Condition............................................................................................................................17 13 Test Configuration...............................................................................................................................17 14 Equipment Under Test Arrangement (Drawings)............................................................................17 Appendix A: Test Data ................................................................................................................................... 18 Appendix B: Test Arrangement (Photographs) ............................................................................................. 24 Appendix C: Test Instruments....................................................................................................................... 26 DEFINITIONS FOR ABBREVIATION AND SYMBOLS USED IN THIS TEST REPORT EUT : Equipment Under Test EMC : Electromagnetic Compatibility AE : Associated Equipment EMI : Electromagnetic Interference N/A : Not Applicable EMS : Electromagnetic Susceptibility N/T : Not Tested - indicates that the listed condition, standard or equipment is applicable for this report. - indicates that the listed condition, standard or equipment is not applicable for this report. JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80110730 Issue Date : April 23, 2012 Model No. : SH-07D FCC ID : APYHRO00168 Regulation : CFR 47 FCC Rules and Regulations Part 15 Page 3 of 27 Documentation 1 Test Regulation Applied Standard : CFR 47 FCC Rules and Regulations Part 15 Subpart C – Intentional Radiators Test Requirements : §15.225, §15.207 and §15.209 Test Procedure : ANSI C63.4–2003 2 Test Location Japan Quality Assurance Organization (JQA) KITA-KANSAI Testing Center Testing Department SAITO EMC Branch 7-3-10, Saito-asagi, Ibaraki-shi, Osaka 567-0085, Japan MINOH Test Site (KITA-KANSAI Testing Center) 7-7, Ishimaru, 1-chome, Minoh-shi, Osaka, 562-0027, Japan KAMEOKA EMC Branch 9-1, Ozaki, Inukanno, Nishibetsuin-cho, Kameoka-shi, Kyoto, 621-0126, Japan 3 Recognition of Test Laboratory JQA KITA-KANSAI Testing Center Testing Dept. SAITO EMC Branch is accredited under ISO/IEC 17025 by following accreditation bodies and the test facility of Testing Division is registered by the following bodies. VLAC Code : VLAC-001-2 (Effective through : March 30, 2014) VCCI Registration No. : A-0002 (Expiry date : March 30,…

Text truncated - open the document above for the full version.

JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80110730 Issue Date : April 23, 2012 Model No. : SH-07D FCC ID : APYHRO00168 Regulation : CFR 47 FCC Rules and Regulations Part 15 Page 24 of 27 Appendix B: Test Arrangement (Photographs) B.1 AC Powerline Conducted Emission Not Applicable B.2 Radiated Emission – X-axis – – Y-axis – JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80110730 Issue Date : April 23, 2012 Model No. : SH-07D FCC ID : APYHRO00168 Regulation : CFR 47 FCC Rules and Regulations Part 15 Page 25 of 27 – Z-axis – Photograph present configuration with maximum emission The EUT position of the maximum emission is Z-axis.

JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80110727R Issue Date : April 18, 2012 Model No. : SH-07D FCC ID : APYHRO00168 Standard : FCC/OET Bulletin 65 Supplement C (Edition 01-01) Page 28 of 35 Technical document No. 23163-1201 15 Test Setup Photographs 15.1 Left Head – Cheek/Touch Position – – Ear/Tilt Position – JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80110727R Issue Date : April 18, 2012 Model No. : SH-07D FCC ID : APYHRO00168 Standard : FCC/OET Bulletin 65 Supplement C (Edition 01-01) Page 29 of 35 Technical document No. 23163-1201 15.2 Right Head – Cheek/Touch Position – – Ear/Tilt Position – JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80110727R Issue Date : April 18, 2012 Model No. : SH-07D FCC ID : APYHRO00168 Standard : FCC/OET Bulletin 65 Supplement C (Edition 01-01) Page 30 of 35 Technical document No. 23163-1201 15.3 Body w/ 1.0 cm (hotspot mode) – Top Edge – – Bottom Edge – JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80110727R Issue Date : April 18, 2012 Model No. : SH-07D FCC ID : APYHRO00168 Standard : FCC/OET Bulletin 65 Supplement C (Edition 01-01) Page 31 of 35 Technical document No. 23163-1201 – Left Edge – – Right Edge – JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80110727R Issue Date : April 18, 2012 Model No. : SH-07D FCC ID : APYHRO00168 Standard : FCC/OET Bulletin 65 Supplement C (Edition 01-01) Page 32 of 35 Technical document No. 23163-1201 – Front Side – – Rear Side – JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80110727R Issue Date : April 18, 2012 Model No. : SH-07D FCC ID : APYHRO00168 Standard : FCC/OET Bulletin 65 Supplement C (Edition 01-01) Page 33 of 35 Technical document No. 23163-1201 – Rear Side w/ headset –