APYHRO00315Smart Phone

zThe screens and illustrations in this manual are shown as examples. The actual screens and illustrations may differ. zNote that “(*****)” is referred to as “handset” in this manual. zThis manual refers to microSD Card, microSDHC Card or microSDXC Card as “microSD Card” or “microSD”. zReproduction of this manual in part or in whole without prior permission is prohibited. zThe contents of this manual are subject to change without prior notice. Introduction Thank you for purchasing “(*****)” . Be sure to read this manual before and during use to ensure proper operation. 1 Contents/Precautions Basic package “(*****)” (This drawing is not final) Quick Start guide (in Japanese only) •Purchase a specified charger (sold separately). The following items are not included in the package. •Earphone •USB Type-C cable •microSD memory card •AC adapter 7 Contents/Precautions Precautions (ALWAYS FOLLOW THESE DIRECTIONS) „ Before use, read these “Precautions” carefully and use your handset properly. „ These precautions contain information intended to prevent bodily injury to the user and to surrounding people, as well as dama ge to property, and must be observed at all times. „ The following symbols indicate the different degrees of injury or damage that may occur if information provided is not observed and the handset is used improperly. Danger This symbol indicates that “death or serious bodily injury ( *1 ) may directly and immediately result from improper use”. Warning This symbol indicates that “death or serious bodily injury ( *1 ) may result from improper use”. Caution This symbol indicates that “minor injury ( *2 ) and/or property damage ( *3 ) may result from improper use”. *1 Serious bodily injury: This refers to loss of eyesight, bodily injury, burns (high- and low-temperature), electric shock, broken bones, injuries with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for treatment or long-term hospital attendance as an outpatient. *2 Minor injury: This refers to bodily injury, burns (high- and low-temperature), electric shock, etc. that do not require hospital admission for treatment or long-term hospital attendance as an outpatient. *3 Property damage: This refers to extended damage to buildings, furniture, livestock, pets, etc. „ The following symbols indicate specific directions. Indicates a prohibited action. Indicates not to handle the device with wet hands. Indicates not to disassemble the device. Indicates that instructions specified are compulsory (must be followed). Indicates not to use the device near water or get it wet. Indicates that the power cord must be unplugged from the outlet. 8 Contents/Precautions “Precautions” is explained in the following sections. zHandling the handset, adapters, nano UIM card and TV antenna cable (general) ..............................P. 8 z Handling the handset ...............................P.10 z Handling adapters .................................P.14 z Handling nano UIM card ............................P.16 z Handling near electronic medical equipment .............P.16 z Material list ......................................P.17 z Handling the sample (SIM eject tool) ...................P.18 Handling the handset, adapters, nano UIM card and TV antenna cable (general) Danger Do not use, store or leave the equipment in locations subject to high temperatures or accumulation of heat (near a fire or heating unit, in a kotatsu or bedding, under direct sunlight, inside a vehicle on a hot day, etc.). May cause fires, burns, bodily injury, electric shock, etc. Do not place the equipment inside cooking appliances such as microwave ovens and induction cookers or high pressure vessels such as pressure cookers, or near them. May cause fires, burns, bodily injury, electric shock, etc. Do not sprinkle sand, soil or dirt on the equipment or put the equipment directly on it. Also, do not touch the equipment when sand etc. is adhering to your hand. May cause fires, burns, bodily injury, electric shock, etc. Refer to the following for details on waterproofness/ dustproofness. ☞ P. 26 “Waterproof/Dustproof” Do not charge the equipment while it is wet with liquids such as water (drinking water, sweat, seawater, pet urine, etc.). May cause fires, burns, bodily injury, electric shock, etc. Refer to the following for details on waterproofness. ☞ P. 26 “Waterproof/Dustproof” Do not press the equipment strongly or broken it. Especially when you put and carry it in the pocket, do not let it hit or caught in the object . May cause fires, burns, bodily injury, etc. because of catching fire, exploding, overheating or leaking of the internal battery. ※Take particular care with the followings z Sitting or squatting down while you are putting the equipment in your pocket of trousers or skirt z Letting the equipment caught in the door or vehicular door while you are putting the equipment in your pocket of outerwear z Stepping on the equipment while it is placing on the soft object such as the sofa or bedding, floor 9 Contents/Precautions Do not attempt to disassemble or modify the equipment. May cause fires, burns, bodily injury, electric shock, etc. Do not get the equipment wet with liquids such as water (drinking water, sweat, seawater, pet urine, etc.). May cause fires, burns, bodily injury, electric shock, etc. Refer to the following for details on waterproofness. ☞ P. 26 “Waterproof/Dustproof” Do not allow liquids such as water (drinking water, sweat, seawater, pet urine, etc.) to get inside the charger terminal or external connection jack. May cause fires, burns, bodily injury, electric shock, etc. Refer to the following for details on waterproofness. ☞ P. 26 “Waterproof/Dustproof” Use only optional parts specified by ●●● . May cause fires, burns, bodily injury, electric shock, etc. Warning Do not subject the equipment to strong force, impacts or vibration such as letting it fall, stepping on it or throwing it. May cause fires, burns, bod…

Text truncated - open the document above for the full version.

1 Takumi-cho, Sakai-ku, Sakai City, Osaka 590-8522, Japan Tel : 81 -50-5433-4157 Date: May 20, 2022 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: APYHRO00315 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR § 0.457, § 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT § 2.803 and the importation rules in 47 CFR § 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705.  External Photos  Internal Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ______________________ Taihei Ohtsuka [email protected] （TCB） .0

1 Takumi-cho, Sakai-ku, Sakai City, Osaka 590-8522, Japan Tel : 81-50-5433-4157 Date: May 20, 2022 Power of Attorney To whom it may concern, Please be notified that I, Taihei Ohtsuka, have designated Amanda Wu in Bureau Veritas Consumer Products Services (Hong Kong) Limited, Taoyuan branch principally located at No.19, HuaYa 2nd Rd., Wenhua Vil., Guishan Dist., Taoyuan City 33383, Taiwan R.O.C., as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Amanda Wu in Bureau Veritas Consumer Products Services (Hong Kong) Limited, Taoyuan branch on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This authorization is limited to the product of as following: FCC ID: APYHRO00315 If you have any acknowledgement and response, please send it to Bureau Veritas Consumer Products Services (Hong Kong) Limited, Taoyuan branch directly. Should you have any questions or comments regardin g this matter, please don’t hesitate to contact me. Sincerely yours, ______________________ Taihei Ohtsuka [email protected] （TCB） .0

Reference No.: BGTL-WTW-P22020477_EXT Page 1 of 4 CONSTRUCTION PHOTOS OF EUT Reference No.: BGTL-WTW-P22020477_EXT Page 2 of 4 Reference No.: BGTL-WTW-P22020477_EXT Page 3 of 4 Reference No.: BGTL-WTW-P22020477_EXT Page 4 of 4

FCC ID Location FCC ID : APYHRO00315 ○e-label (on the display) ○Access to the information on the e-label Users are able to access the information in no more than three steps in the Settings Menu. STEP1: Click on "About phone" STEP2: Click on "Regulatory labels" ○Instruction of e-label on the user manual * Users are provided specific instructions on how to access the information. FCC Notice (FCC ID Location) ○Labeling for Purchasing The FCC ID is printed on the package. 〇Note * The information is stored on the device, no special accessories or supplemental plug-ins (e.g., SIM/USIM card) are required to access the information. * Users are provided specific instructions on how to access the information. The user cannot modify the e-label information. FCC ID: APYHRO00315 Model Name Manufacturer Regulatory labels FCC ID Location The device is electronically labeled and the FCC ID can be displayed via the About phone & the Regulatory labels under the Settings Menu.

Reference No.: BGTL-WTW-P22020477_INT Page 1 of 17 CONSTRUCTION PHOTOS OF EUT Reference No.: BGTL-WTW-P22020477_INT Page 2 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 3 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 4 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 5 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 6 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 7 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 8 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 9 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 10 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 11 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 12 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 13 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 14 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 15 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 16 of 17 Reference No.: BGTL-WTW-P22020477_INT Page 17 of 17

Report No.: FDBGTL-WTW-P22020477 R1 Page No. 1 / 29 Report Format Version: 7.1.0 Cancels and replaces the report no. : FDBGTL-WTW-P22020477 dated on May 30, 2022. TEST REPORT CERTIFICATE OF CONFORMITY Standards: 47 CFR FCC Part 15, Subpart B, Class B ANSI C63.4-2014 Report No.: FDBGTL-WTW-P22020477 R1 FCC ID: APYHRO00315 Received Date: Feb. 19, 2022 Test Date: May 05 ~ May 07, 2022 Issued Date: Jun. 07, 2022 Applicant: SHARP Corporation Mobile Communication BU Address: 2-13-1 Iida Hachihonmatsu Higashi-hiroshima City, Hiroshima 730-0192, Japan Manufacturer: Sharp Corporation Address: 1 Takumi-cho, Sakai-ku, Sakai City, Osaka 590-8522, Japan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 328930 / TW1050 Approved by : , Date: Jun. 07, 2022 Ace Wu / Project Engineer This test report consists of 29 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Lena Wang / Specialist This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: FDBGTL-WTW-P22020477 R1 Page No. 2 / 29 Report Format Version: 7.1.0 Cancels and replaces the report no. : FDBGTL-WTW-P22020477 dated on May 30, 2022. Table of Contents Release Control Record ...................................................................................................................................3 1 Certification ...............................................................................................................................................4 2 Summary of Test Results .........................................................................................................................5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record............................................................................................................................. 5 3 General Information ..................................................................................................................................6 3.1 Description of EUT .............................................................................................................................. 6 3.2 Primary Clock Frequencies of Internal Source ................................................................................... 6 3.3 Features of EUT .................................................................................................................................. 6 3.4 Operating Modes of EUT and Determination of Worst Case Operating Mode ................................... 7 3.5 Test Program Used and Operation Descriptions ................................................................................. 9 3.6 Connection Diagram of EUT and Peripheral Devices ....................................................................... 10 3.7 Configuration of Peripheral Devices and Cable Connections ........................................................... 10 4 Test Instruments ..................................................................................................................................... 11 4.1 Conducted Emissions from Power Ports........................................................................................... 11 4.2 Radiated Emissions up to 1 GHz ...................................................................................................... 11 4.3 Radiated Emissions above 1 GHz .................................................................................................... 12 5 Limits of Emission ................................................................................................................................. 13 5.1 Conducted Emissions from Power Ports........................................................................................... 13 5.2 Radiated Emissions up to 1 GHz ...................................................................................................... 13 5.3 Radiated Emissions above 1 GHz .................................................................................................... 14 6 Test Arrangement ........................................................................…

Text truncated - open the document above for the full version.

Report No.: FDBGTL-WTW-P2202047 R1_TSup 1 PHOTOGRAPHS OF THE TEST CONFIGURATION Conducted Emissions from Power Ports Report No.: FDBGTL-WTW-P2202047 R1_TSup 2 Radiated Emissions up to 1 GHz Report No.: FDBGTL-WTW-P2202047 R1_TSup 3 Radiated Emissions above 1 GHz