AUSCR3503APARKER RADIO CD PLAYER

CR3503A-WA CD Player - USER MANUAL - Product Description Front Panel 1. POWER: Press to power on/off the unit. 2. DISC Tray: The CD is loaded here. 3. LED DISPLAY 4. MODE: Press to change the mode. 5. PREV: In USB/Bluetooth mode:short press to previous section. In FM mode: short press to previous station. In CD mode: Short press to previous section. Hold and press to quick return button to quickly rewind playback. Press Play/Pause key again to resume normal playback. 6. NEXT: In USB/Bluetooth mode:Short press to next section. In FM mode:Short press to next station. In CD mode: Short press to previous section. Long press to quick forward button to quickly advance playback. Press Play/Pause key again to resume normal playback. 7. PLAY/PAUSE: In USB/SD/CD/Bluetooth mode:Play/Pause. In FM mode:Automatically searching station. 8. STOP: When press the “STOP” key for the first time, the player will stop playing. Press “ ” this button will continue to play from current music. When press the “STOP” key twice, the player will enter stop state. Press “ ” this button will continue to play from first music. 9. OPEN/CLOSE: Open/Close the CD Door. 10. VOLUME: Rotary the knob to adjust the volume. Back Panel 11. OUT-R/OUT-L: Left/Right Speaker Jack 12. DC 12V: Power input jack 13. LINE IN: Audio input jack (connect another audio output device) 14. ANT: FM Antenna（Fixed） Remote control 1. Power Key 2. Mute Key 3. Mode Key 4. STOP Key 5. Turn up volume 6. Repeat Key 7. Play/Pause Key(FM mode: Search Station) 8. Short press to last section/station. Long press to back forward in CD mode. 9. Short press to next section/station. Long press to fast forward in CD mode. 10. Turn down volume 11. Number Key Connection 1. Connect the Left and Right speakers to OUT-L/OUT-R jacks at the back of the unit. 2. Plug the power cord to unit firstly and then plug the adapter to wall power outlet. 3. Press the POWER button on the unit to turn on the player. Mode Selection CD mode 1. Press Source button to enter CD mode. 2. Press the OPEN/CLOSE button on the unit or remote control to open the CD door. 3. Insert a CD in the disc tray with the label facing up and press the button to close the CD door. 4. Use the controls on the unit or the remote to begin playing the loaded disc. Basic Operation: -STOP: When press the “STOP” key for the first time, the player will stop playing. Press “ ” this button will continue to play from current music. When press the “STOP” key twice, the player will enter stop state. Press “ ” this button will continue to play from first song. -Repeat: When playing music, press “REPEAT” for the first time will repeat current playing. Press “REPEAT” twice will repeat the whole disc. Press “REPEAT” for three times will cancel repeat function. -Number Key(0-9,10+) For CD disc, (1)To appoint 1-9 tracks, press the corresponding number keys(1-9) (2)To appoint 10 track, press the number key (0) (3)To appoint 10+ tracks, press the number key(10+). For example: the 15th song, press number key (10+) and (5). (4)To appoint 20+ tracks, press the number key(10+) for twice. For example: the 25th song, press number key(10+) for twice time and press number key (5). (5)If the track does not exist, the key is invalid. For MP3 disc, press the number keys to select the tracks. For example, the 38th song, press the number key(3) and number key(8). Bluetooth mode The first time you use your Bluetooth device with this player, you will need to connect or “pair” it with the player first. Switch to the Bluetooth model, then use Bluetooth device to search the “CROSLEY CR3503A” pairing. There will be a prompt sound after the successful pairing. If the pairing device is disconnected, the unit will also issue a prompt sound. FM mode When you switch the unit to the radio mode, you can listen to the FM radio program in this mode. 1.This radio antenna is on the back of the machine. When you need to listen to radio, please open the FM antenna. 2.In FM mode, hold and press the Play/Pause key on the unit or remote control to automatically search station. It will save the station once searching completed. Press the “” or “” on the unit or remote control to select station. 3.Hold and press the PREV/NEXT to tune up or down the frequency band by 0.1MHz. LINE IN mode: Switching to LINE IN mode, use 3.5mm audio cable(not provided) to connect player with other audio output devices. USB MODE - Insert USB flash driver with MP3 documents, the device will play the MP3 files automatically. Trouble Shooting If you are suffering from following problem, please refer to following supplied method. If the problem still can’t be solved, please contact the maintaining center. Specification Note: Specification are subject to change without notice. Problem Solution No sound 1.To check the player connection between the mobile phone or other audio output device 2.The volume is turned down.Adjust the volume Don’t play disc 1.To check whether the disc is put in the proper direction. 2.To check whether there is disc in the tray. 3.The disc is dirty. Please clean the disc. The remote control does not work 1.To remove obstacles between remote control and player. 2.If the battery is exhausted, replace it with a new one. 3.The insulation sheet has been inserted in the battery compartment when shipped from the factory. Pull it out before use. Button does not work It may be caused by the power wave or other abnormity, please turn off the power and turn it on again after 10seconds. Reference CR3503A-WA Playable disc types CD/CD-R/CD-RW/MP3/WMA Loudspeakers 20 Watts Power Supply Input AC 100V~240V 50/60Hz Output DC 12V--2A Accessories included AC adaptor, Remote Control NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radi…

Text truncated - open the document above for the full version.

Modern Marketing Concepts, Inc. Agent Authorization Company: Modern Marketing Concepts, Inc. Address: 1220 E Oak, St. Louisville, Kentucky, United States 40204 Product Name: PARKER RADIO CD PLAYER Model Number(s): CR3503A, CR3503A-WA, CR3503X-XX (X-XX can be replaced by letter from "A" to "Z" or number from "0" to "9" or blank.) BJ702B-CD, BJXXXX-XXX(XXXX-XXX can be by letter from "A" to "Z" or number from "0" to "9" or blank.) Product Description: PARKER RADIO CD PLAYER We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2022-11-03 Name: Scott McWhorter Company: Modern Marketing Concepts, Inc.

Modern Marketing Concepts, Inc. Nov.03, 2022 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : AUSCR3503A Model Number: CR3503A, CR3503A-WA, CR3503X-XX (X-XX can be replaced by letter from "A" to "Z" or number from "0" to "9" or blank.) BJ702B-CD, BJXXXX-XXX(XXXX-XXX can be by letter from "A" to "Z" or number from "0" to "9" or blank.) To Whom It May Concern: We, The Modern Marketing Concepts, Inc. hereby declare that the models are identical except the model names and the color of appearance. Except for the different above, no other modification is performed. Sincerely, Signature: Modern Marketing Concepts, Inc. Contact person: Scott McWhorter

Modern Marketing Concepts, Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-08-31 Subject; Request for Confidentiality FCC ID: AUSCR3503A To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Modern Marketing Concepts, Inc. Contact person: Scott McWhorter

Report No.: AGC06815220801AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT ADAPTER VIEW OF EUT Report No.: AGC06815220801AP02 Page 2 of 4 TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC06815220801AP02 Page 3 of 4 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC06815220801AP02 Page 4 of 4 LEFT VIEW OF EUT RIGHT VIEW OF EUT ****************************************End of Report****************************************

FCC ID Label Location 100mm&20mm FCC ID: AUSCR3503A

Report No.: AGC06815220801AP02 Page 1 of 3 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) ANTENNA CLOSE-UP PHOTO-1 Antenna Report No.: AGC06815220801AP02 Page 2 of 3 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC06815220801AP02 Page 3 of 3 INTERNAL VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 4) ****************************************End of Report****************************************

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description PARKER RADIO CD PLAYER Test Model CR3503A Series Model CR3503A-WA, CR3503X-XX (X-XX can be replaced by letter from "A" to "Z" or number from "0" to "9" or blank.) BJ702B-CD, BJXXXX-XXX (XXXX-XXX can be by letter from "A" to "Z" or number from "0" to "9" or blank.) FCC ID AUSCR3503A 2. EVALUATION METHOD According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. Where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 3. CALCULATION BR/EDR: Pt=-6.206dBm=0.24mW The value of the Maximum output power Pt is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(0.24mW /5mm) .[√2.402(GHz)]= 0.07<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. 4. CONCLUSION The SAR evaluation is not required.

Page 1 of 69 FCC Test Report Report No.: AGC06815220801FE03 FCC ID : AUSCR3503A APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : PARKER RADIO CD PLAYER BRAND NAME : CROSLEY MODEL NAME : CR3503A, CR3503A-WA, CR3503X-XX (X-XX can be replaced by letter from "A" to "Z" or number from "0" to "9" or blank.) BJ702B-CD, BJXXXX-XXX (XXXX-XXX can be by letter from "A" to "Z" or number from "0" to "9" or blank.) APPLICANT : Modern Marketing Concepts, Inc. DATE OF ISSUE : Aug. 31, 2022 STANDARD(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC06815220801FE03 Page 2 of 69 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Aug. 31, 2022 Valid Initial Release Report No.: AGC06815220801FE03 Page 3 of 69 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................................... 6 2.3. RECEIVER INPUT BANDWIDTH .............................................................................................................. 7 2.4. EXAMPLE OF A HOPPING SEQUENCY IN DATA MODE ......................................................................... 7 2.5. EQUALLY AVERAGE USE OF FREQUENCIES AND BEHAVIOUR ......................................................... 7 2.6. RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................... 8 2.7. TEST METHODOLOGY ............................................................................................................................. 8 2.8. SPECIAL ACCESSORIES ......................................................................................................................... 8 2.9. EQUIPMENT MODIFICATIONS ................................................................................................................. 8 2.10. ANTENNA REQUIREMENT..................................................................................................................... 8 3. MEASUREMENT UNCERTAINTY ................................................................................................................... 9 4. DESCRIPTION OF TEST MODES ................................................................................................................. 10 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 11 5.1. CONFIGURATION OF EUT SYSTEM ...................................................................................................... 11 5.2. EQUIPMENT USED IN TESTED SYSTEM .............................................................................................. 11 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 11 6. TEST FACILITY .............................................................................................................................................. 12 7. PEAK OUTPUT POWER ................................................................................................................................ 13 7.1. MEASUREMENT PROCEDURE ............................................................................................................. 13 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 13 7.3. LIMITS AND MEASUREMENT RESULT .................................................................................................. 14 8. 20DB BANDWIDTH ........................................................................................................................................ 19 8.1. MEASUREMENT PROCEDURE ............................................................................................................. 19 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 19 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................... 20 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 25 9.1. MEASUREMENT PROCEDURE ............................................................................................................. 25 Report No.: AGC06815220801FE03 Page 4 of 69 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 25 9.3. MEASUREMENT EQUIPMENT USED .................................................................................................... 25 9.4. LIMITS AND MEASUREMENT RESULT .................................................................................................. 25 10. RADIATED EMISSION ................................................................................................................................. 46 10.1. MEASUREMENT PROCEDURE ........................................................................................................... 46 10.2. TEST SETUP ......................................................................................................................................... 48 10.3. LIMITS AND MEASUREMENT RESULT ............................................................................................... 49 10.4. TEST RESULT.............................…

Text truncated - open the document above for the full version.

Report No.: AGC06815220801FE03 Page 64 of 69 13. FREQUENCY SEPARATION 13.1. MEASUREMENT PROCEDURE The EUT shall have its hopping function enabled. Use the following spectrum analyzer settings: 1. Span: Wide enough to capture the peaks of two adjacent channels. 2. RBW: Start with the RBW set to approximately 30% of the channel spacing; adjust as necessary to best identify the center of each individual channel. 3. Video (or average) bandwidth (VBW) ≥ RBW. 4. Sweep: Auto. e) Detector function: Peak. f) Trace: Max hold. g) Allow the trace to stabilize. Use the marker-delta function to determine the separation between the peaks of the adjacent channels. 13.2. TEST SETUP (BLOCK DIAGRAM OF CONFIGURATION) Same as described in section 6.2 13.3. MEASUREMENT EQUIPMENT USED The same as described in section 6.3 13.4. LIMITS AND MEASUREMENT RESULT Test Data of Frequency Separation Test Mode Channel Separation (MHz) Limits Pass or Fail GFSK Hopping 1.043 >= 2/3 -20dB BW Pass Test Graphs of Number of Hopping Frequency Test_Graph_BR_HOP_ANT1_NA_1Mbps_Hopping Separation Note: The GFSK modulation is the worst case and recorded in the report. Report No.: AGC06815220801FE03 Page 65 of 69 14. LINE CONDUCTED EMISSION TEST 14.1. LIMITS OF LINE CONDUCTED EMISSION TEST Frequency Maximum RF Line Voltage Q.P. (dBμV) Average (dBμV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 14.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST EUT & Support Units Report No.: AGC06815220801FE03 Page 66 of 69 14.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2. Support equipment, if needed, was placed as per ANSI C63.10. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. 4. All support equipment received AC120V/60Hz power from a LISN, if any. 5. The EUT received DC 5V power from adapter which received AC120V/60Hz power from a LISN. 6. The test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 kHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation. 9. The test mode(s) were scanned during the preliminary test. Then, the EUT configuration and cable configuration of the above highest emission level were recorded for reference of final testing. 14.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST 1. EUT and support equipment was set up on the test bench as per step 2 of the preliminary test. 2. A scan was taken on both power lines, Line 1 and Line 2, recording at least the six highest emissions. Emission frequency and amplitude were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit. If EUT emission level was less – 2dB to the A.V. limit in Peak mode, then the emission signal was re-checked using Q.P and Average detector. 3. The test data of the worst case condition(s) was reported on the Summary Data page. Report No.: AGC06815220801FE03 Page 67 of 69 14.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST Line Conducted Emission Test Line 1-L Report No.: AGC06815220801FE03 Page 68 of 69 Line Conducted Emission Test Line 2-N RESULT: PASS Note: All the test modes had been tested, the mode 7 was the worst case. Only the data of the worst case would be record in this test report. Report No.: AGC06815220801FE03 Page 69 of 69 APPENDIX A: PHOTOGRAPHS OF TEST SETUP Refer to the Report No.: AGC06815220801AP01 APPENDIX B: PHOTOGRAPHS OF EUT Refer to the Report No.: AGC06815220801AP02 ----END OF REPORT---- Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd. (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to its customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court orders. 3.The Company shall not be called or be liable to be called to give evidence or testimony on the Report in a court of law …

Text truncated - open the document above for the full version.

Report No.: AGC06815220801AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC06815220801AP01 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************