AUSCR8009BDiscovery Turntable

CR8009B-DU Discovery Turntable Instruction Manual Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-888-CROSLEY www.crosleyradio.com English 2 Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Do not use this product near water. 2. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual. 3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet try reversing the plug. If the plug should still fail to fit, contact your electrician. 4. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the product. 5. Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 6. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 7. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 8. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 9. Do not use attachments not recommended by the product manufacturer as they may cause hazards. 10. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 11. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. Do not block or cover these openings. 12. Unplug the product during lightning storm or when unused for long periods of time. English 3 Items in this package Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package: • Turntable • 45 RPM adapter • Power adaptor Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes. Specifications Power AC power adaptor, DC output 5 V 1 A Power consumption 9 W Speaker 4Ω, 3W x 2 Turntable speed 33 1 / 3 , 45, 78 RPM Replacement needle Crosley NP6 Note: • Design and specifications are subject to change without notice. • To help save power consumption, some models will comply with ERP energy saving standard. When there is no audio input for 20 minutes, their powers will automatically cut-off. To turn power back on and resume playing, you will need to turn off the power and turn it on again. 4 Product Description 1. Turntable Platter 2. Turntable Spindle 3. Tonearm Lever 4. Tonearm 5. Function Switch 6. Function Indicator 7. Auto-stop Switch 8. Speed Switch 9. Pitch Control 10. Hold Down Clip 11. On/Off-Volume Knob 12. Headphone Jack 13. Aux In Jack 14. RCA Jacks 15. Power Jack 16. 45 RPM Adapter 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 16 English 5 Initial Setup Essential Setup 1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 2. Remove the tie-wrap that is holding the tonearm. 3. Connect AC adaptor to the Power Jack of the unit. Note: Do not plug the AC power adaptor to power outlet before all the assembly is completed. Before turning the power on, make sure again all the connection settings are correct. Always turn off the power when connecting or disconnecting. Stereo System Connection RCA Jacks • The RCA Jacks output analog line-level signals and could be connected directly with a pair of active/powered speakers or the appropriate input of your stereo system. • The Red plug connects with the Right channel and the White plug connects with the Left channel. Note: The RCA Jacks are not designed to be connected directly to passive/unpowered speakers. If connected to passive speakers, the volume level will be very low. Aux Input Connection You can connect an audio device to this unit and play your music through its speakers. To do this, connect the 3.5mm auxiliary cable between your audio device and the Aux In Jack of this unit and start playing the music. Note: The aux in connection will automatically override the turntable and Bluetooth functions. To resume using the turntable or Bluetooth functions, unplug the auxiliary cable from the aux in jack. The Function Indicator will be purple. English 6 Turntable Operation 1. Rotate the On/Off Volume Knob to turn on the power. 2. Set the Function Switch to PHONO position. Note: The Function Indicator will be red. 3. Set the Speed Switch accordingly. 4. Place the record on the turntable. Use the 45 RPM Adapter if necessary. 5. Remove the stylus protector from the stylus assembly. Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being moved or cleaned. 6. Release the tonearm Hold Down Clip. Note: when the turntable is not in use, remember to lock back hold down clip. 7. Use the Tonearm Lever to lift up the tonearm. 8. Gently move the tonearm over the record where play is desired to begin. Set the Tonearm Lever back to the down position, the tonearm will descend slowly onto the record and begin to playback. 9. When the record is finished playing, use the Tonearm Lever again to raise the tonearm and then return it to the Tonearm Rest. Release the lever to let the tonearm sit back at its rest. To suspend the playba…

Text truncated - open the document above for the full version.

Appendix- CR8009B-DU-Photos Page 3 of 13 2. Photographs –Constructional Details 2.1. EUT – External View Model CR8009B-DU FCC ID: AUSCR8009B Appendix- CR8009B-DU-Photos Page 4 of 13 Appendix- CR8009B-DU-Photos Page 5 of 13 Appendix- CR8009B-DU-Photos Page 6 of 13 Appendix- CR8009B-DU-Photos Page 7 of 13

CR8009B-DU-Label and Label Location Label sample Location

Appendix- CR8009B-DU-Photos Page 8 of 13 2.2. EUT – Internal View Model CR8009B-DU FCC ID: AUSCR8009B Appendix- CR8009B-DU-Photos Page 9 of 13 BT Ant. Appendix- CR8009B-DU-Photos Page 10 of 13 Appendix- CR8009B-DU-Photos Page 11 of 13 Appendix- CR8009B-DU-Photos Page 12 of 13 Appendix- CR8009B-DU-Photos Page 13 of 13 ======End======

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 7 TEST REPORT Referen ce No. .................... : WTX21D04042142W002 FCC ID ................................ : AUSCR8009B Applicant ............................ : Modern Marketing Concepts, Inc. Address .............................. : 1220 E Oak, St. Louisville, KY 40204 United States Manufacturer .................... : Timsen Development Limited Address .............................. : 5F, 447# Tianhebei Road, Guangzhou, China Product ............................... : Discovery Turntable Model(s) ............................. : CR8009B-DU Standards........................... : FCC Part 2.1091 Date of Receipt sample .... : 2021-04-30 Date of Test ....................... : 2021-04-30 to 2021-05-12 Date of Issue ...................... : 2021-05-13 Test Result ......................... : Pass Remarks: The re sults shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Estel Qian / Project Engineer Daniel Liu / Designated Reviewer Reference No.: WTX21D04042142W002 Page 2 of 7 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2. Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2. CONTENTS ............................................................................................................................................................ 2 3. REVISION HISTORY ............................................................................................................................................ 3 4. GENERAL INFORMATION .................................................................................................................................. 4 4.1. GENERAL DESCRIPTION OF E.U.T. ............................................................................................................ 4 4.2. DETAILS OF E.U.T. ..................................................................................................................................... 4 5. TEST SUMMARY .................................................................................................................................................. 5 6. RF EXPOSURE ...................................................................................................................................................... 6 6.1. REQUIREMENTS .......................................................................................................................................... 6 6.2. THE PROCEDURES / LIMIT ........................................................................................................................... 6 6.3. MPE CALCULATION METHOD .................................................................................................................... 7 6.4. RESULT: COMPLIANCE ............................................................................................................................... 7 Reference No.: WTX21D04042142W002 Page 3 of 7 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 3. Revision History Test report No. Date of Receipt sample Date of Test Date of Issue Purpose Comment Approved WTX21D04042142 W002 2021-04-30 2021-04-30 to 2021-05-12 2021-05-13Original - Valid Reference No.: WTX21D04042142W002 Page 4 of 7 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4. General Information 4.1. General Description of E.U.T. Product: Discovery Turntable Model(s): CR8009B-DU Additional model(s): CR8009X-XXXX ("X-XXXX" can be replaced by letter from "A" to "Z", number from "0" to "9" or blank) Operation Frequency: 2402-2480MHz, 79 Channels in total Max. RF output power: -1.48dBm Antenna installation: PCB Printed Antenna Antenna Gain: -0.58dBi Type of Modulation: GFSK, π/4DQPSK, 8DPSK Hardware Version: 1.0 Software Version: 1.0 4.2. Details of E.U.T. Max. RF output power: -1.48dBm Ratings: DC 5V 1A from adapter Adapter: Model: ZWSP-050100US002 Input: 100-240V ~ 50/60Hz 0.5A Output: 5V 1000mA N/A Reference No.: WTX21D04042142W002 Page 5 of 7 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 5. Test Summary Test Items Test Requirement Result Maximum Permissible Exposure (Exposure of Humans to RF Fields) FCC Part 2.1091 PASS Reference No.: WTX21D04042142W002 Page 6 of 7 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 6. RF Exposure Test Requirement: FCC Part 2.1091 Evaluation Method: KDB 447498 D01 General RF Exposure Guidance v06 6.1. Requirements Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. 6.2. The procedures / limit (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 82…

Text truncated - open the document above for the full version.

Walte k Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 49 TEST REPORT Re ference No. .................... : WTX21D04042142W001 V1 FCC ID ................................ : AUSCR8009B Applicant ........................... : Modern Marketing Concepts, Inc. Address ............................. : 1220 E Oak, St. Louisville, KY 40204 United States Manufacturer .................... : Timsen Development Limited Address ............................. : 5F, 447# Tianhebei Road, Guangzhou, China Product .............................. : Discovery Turntable Model(s). ............................ : CR8009B-DU Standards .......................... : FCC CFR47 Part 15 Section 15.247 Date of Receipt sample .... : 2021-04-30 Date of Test ....................... : 2021-04-30 to 2021-05-12 Date of Issue ..................... : 2021-06-02 Test Result ........................ : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Estel Qian / Test Engineer Daniel Liu /Designated Reviewer Reference No.: WTX21D04042142W001 V1 Page 2 of 49 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................................ 2 3 REVISION HISTORY ............................................................................................................................................ 4 4 GENERAL INFORMATION .................................................................................................................................. 5 4.1 GENERAL DESCRIPTION OF E.U.T ................................................................................................................. 5 4.2 DETAILS OF E.U.T ........................................................................................................................................... 6 4.3 CHANNEL LIST ................................................................................................................................................. 6 4.4 TEST MODE ..................................................................................................................................................... 6 5 EQUIPMENT USED DURING TEST .................................................................................................................. 7 5.1 EQUIPMENTS LIST ........................................................................................................................................... 7 5.2 MEASUREMENT UNCERTAINTY ....................................................................................................................... 8 5.3 SUBCONTRACTED ............................................................................................................................................ 8 6 TEST FACILITY ..................................................................................................................................................... 8 7 TEST SUMMARY .................................................................................................................................................. 9 8 CONDUCTED EMISSION .................................................................................................................................. 10 8.1 E.U.T. OPERATION ....................................................................................................................................... 10 8.2 EUT SETUP ................................................................................................................................................... 10 8.3 MEASUREMENT DESCRIPTION ...................................................................................................................... 10 8.4 CONDUCTED EMISSION TEST RESULT ......................................................................................................... 11 9 RADIATED EMISSIONS ..................................................................................................................................... 13 9.1 EUT OPERATION ........................................................................................................................................... 13 9.2 TEST SETUP .................................................................................................................................................. 14 9.3 SPECTRUM ANALYZER SETUP ...................................................................................................................... 15 9.4 TEST PROCEDURE ........................................................................................................................................ 16 9.5 CORRECTED AMPLITUDE & MARGIN CALCULATION ..................................................................................... 16 9.6 SUMMARY OF TEST RESULTS ....................................................................................................................... 17 10 DUTY CYCLE ....................................................................................................................................................... 20 11 BAND EDGE MEASUREMENT ........................................................................................................................ 21 11.1 TEST PROCEDUR…

Text truncated - open the document above for the full version.

Appendix- CR8009B-DU-Photos Page 1 of 13 1. Test Setup photos Model CR8009B-DU FCC ID: AUSCR8009B 1.1 Photograph – Conducted Emission Test Setup For Conducted Emission Test Site 1# 1.2 Photograph – Radiated Emissions For 30MHz-1000MHz Test Site 1# Appendix- CR8009B-DU-Photos Page 2 of 13 For Above 1GHz Test Site 2#