AUSCT201ACassette Player

CT201A-BK CASSETTE PLAYER Card www.crosleyradio.com 1.866.276.7539 CASSETTE PLAYER CT201A-BK Crosley Player’s Cassette

Cassette Player CT201A-BK CT201A-BK CT201A-BK CT201A-BK CT201A-BK Cassette Player Cassette Player CROSLEY CT201A CROSLEY CT201A CROSLEY CT201A CROSLEY CT201ACROSLEY CT201A CROSLEY CT201A CROSLEY CT201A CROSLEY CT201A CROSLEY CT201A CROSLEY CT201A 28 520-1710 120V AC, 60 Hz Crosley Crosley Unite StatesModern Marketing Concepts Inc. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer ence,and (2) This device must accept any interference receiv ed, including interfer ence that may cause undesired operation. 2. Changes or modifications not expr essly approved by the party responsibl e for compliance could void the user's authority to oper ate the equipment. NOTE: This equipment has been tested and found to compl y with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits ar e desig ned to provid e reasonable pr otection ag ainst harmful interference in a residential installation. This equipment generates uses and can radiate radio fr equency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If thi s equipment does cause harmful interference to radio or tele vis ion reception, which can be determined by turning the equipment off and on, the user is encour aged to tr y to correct the inter ference by one or more of the following measures: Reorient or relo cate the receiving antenna. Increase the separ ation between the equipment and receiv er. Connect the equipment into an outlet on a circuit different from that to which the receiv er is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposur e requirement. The device can be used in portable exposur e condition without restr iction. www.crosleyradio.com Int’l: 1.866.276.7539

DATE : 2020.4.24 I, the signer, Scott McWhorter The differences between these models are the model number and the color of the appearance. All models are electrically identical. Item Name ：Cassette Player Model Number: CT201A-BK Additional Model: CT201A-XX (‘XX’ refers to the color of the appearance, ’X’ can be ‘A’ to ‘Z’.) FCC ID: AUSCT201A Name: Scott McWhorter Title: Director of Engineering Company: Modern Marketing Concepts, Inc.

DATE : 2020.04.24 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: AUSCT201A Product Name: Cassette Player Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Name: Scott McWhorter Title: Director of Engineering Company: Modern Marketing Concepts, Inc.

DATE : 2020.4.24 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint EST Technology Co., Ltd. Address: Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Modern Marketing Concepts, Inc. Address: 1220 E Oak, St., Louisville, Kentucky,United States (Applicant Name and address) Name: Scott McWhorter Title: Director of Engineering Company: Modern Marketing Concepts, Inc.

External photos M/N: CT201A-BK External photos M/N: CT201A-BK External photos M/N: CT201A-BK External photos M/N: CT201A-BK External photos M/N: CT201A-BK

尺寸: 64.8*29.5mm+0/-0.2mm 材质：0.5mm PVC, 反面背强粘性胶 XXXXXXXXX Model : CT201A-XX Made in China CASSETTE PLAYER POWER SUPPLY:AC 120V ~, 60Hz , 30W DC 9V (6 x 1.5V "D" size , UM-1 Batteries) FREQUENCY RANGE FM 87.5~108MHz AM 520~1710KHz FCC ID: AUSCT201A Modern Marketing Concepts Inc. WARNING:Cancer and Reproductive Harm - www.P65Warnings.ca.gov. For more information go to www.CrosleyBrands.com/Compliance/Prop65

Internal photos M/N: CT201A-BK Internal photos M/N: CT201A-BK Internal photos M/N: CT201A-BK Internal photos M/N: CT201A-BK Internal photos M/N: CT201A-BK Internal photos M/N: CT201A-BK Internal photos M/N: CT201A-BK Bluetooth antenna

FCC ID: AUSCT201A EST Technology Co., Ltd Report No. ESTE-R2004041 Page 1 of 3 FCC RF EXPOSURE REPORT Modern Marketing Concepts, Inc. Cassette Player Model Number: CT201A-BK Additional Model: CT201A-XX (XX represent different color) FCC ID: AUSCT201A Prepared for: Modern Marketing Concepts, Inc. 1220 E Oak, St., Louisville,Kentucky,United States Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2004041 Date of Test: Apr. 02~23, 2020 Date of Report: Apr. 24, 2020 FCC ID: AUSCT201A EST Technology Co., Ltd Report No. ESTE-R2004041 Page 2 of 3 1. Applicable Standards FCC Part 2(Section 2.1093) FCC KD B447498 D01 General RF Exposure Guidance v06 2. Exposure Evaluation of Portable or Mobile Devices Human exposure to RF emissions from portable devices (47 CFR §2.1093), as defined by the FCC, must be evaluated with respect to the FCC-adopted limits for SAR. Evaluation of mobile devices, as defined by the FCC, may also be performed with respect to SAR limits, but in such cases it is usually simpler and more cost-effective to evaluate compliance with respect to field strength or power density limits. For certain devices that are designed to be used in both mobile and portable configurations similar to those described in 47 CFR §2.1091(d)(4), such as certain desktop phones and wireless modem modules, compliance for mobile configurations is also satisfied when the same device is evaluated for SAR compliance in portable configurations. SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. FCC ID: AUSCT201A EST Technology Co., Ltd Report No. ESTE-R2004041 Page 3 of 3 3. Evaluation Results Mode Frequency (MHz) Peak output Power (dBm) Peak output Power (mW) Target power (dBm) Results GFSK 2402 -1.05 0.785 -1±2 0.390 2441 -0.90 0.813 -1±2 0.393 2480 -1.24 0.752 -1±2 0.397 π/4-DQPSK 2402 0.06 1.014 0±2 0.491 2441 0.23 1.054 0±2 0.495 2480 -0.11 0.975 0±2 0.499 Note: 1. [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] < 3.0. 2. SAR Test Exclusion Thresholds is 3.0 for separation distance 5mm. Therefore, SAR test is not required. End of Test Report

FCC ID: AUSCT201A EST Technology Co., Ltd Report No.ESTE-R2004040 Page 1 of 75 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Modern Marketing Concepts, Inc. Cassette Player Model Number: CT201A-BK Additional Model: CT201A-XX (XX represent different color) FCC ID: AUSCT201A Prepared for: Modern Marketing Concepts, Inc. 1220 E Oak, St., Louisville,Kentucky,United States Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2004040 Date of Test: Apr. 02~23, 2020 Date of Report: Apr. 24, 2020 FCC ID: AUSCT201A EST Technology Co., Ltd Report No.ESTE-R2004040 Page 2 of 75 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION ........................................................................................................................ 3 1. GENERAL INFORMATION ................................................................................................................. 5 1.1. Description of Device (EUT) ........................................................................................................... 5 1.2. Antenna Information ........................................................................................................................ 5 2. SUMMARY OF TEST ......................................................................................................................... 6 2.1. Summary of test result ...................................................................................................................... 6 2.2. Test Facilities .................................................................................................................................... 7 2.3. Measurement uncertainty ................................................................................................................. 8 2.4. Assistant equipment used for test ..................................................................................................... 8 2.5. Block Diagram .................................................................................................................................. 8 2.6. Test mode ......................................................................................................................................... 9 2.7. Channel List .................................................................................................................................... 10 2.8. Power Setting of Test Software ...................................................................................................... 10 2.9. Test Equipmen ................................................................................................................................ 11 3. MAXIMUM PEAK OUTPUT POWER ................................................................................................. 12 3.1. Limit ............................................................................................................................................... 12 3.2. Test Setup ....................................................................................................................................... 12 3.3. Spectrum Analyzer Setting ............................................................................................................. 12 3.4. Test Procedure ................................................................................................................................ 12 3.5. Test Result ...................................................................................................................................... 13 4. 20 DB BANDWIDTH ...................................................................................................................... 17 4.1. Limit ............................................................................................................................................... 17 4.2. Test Setup ....................................................................................................................................... 17 4.3. Spectrum Analyzer Setting ............................................................................................................. 17 4.4. Test Procedure ................................................................................................................................ 17 4.5. Test Result ...................................................................................................................................... 18 5. CARRIER FREQUENCY SEPARATION .............................................................................................. 22 5.1. Limit ............................................................................................................................................... 22 5.2. Test Setup ....................................................................................................................................... 22 5.3. Spectrum Analyzer Setting ............................................................................................................. 22 5.4. Test Procedure ................................................................................................................................ 22 5.5. Test Result ...................................................................................................................................... 23 6. NUMBER OF HOPPING CHANNEL .................................................................................................. 27 6.1. Limit ............................................................................................................................................... 27 6.2. Test Setup ....................................................................................................................................... 27 6.3. Spectrum Analyzer Setting ................................................…

Text truncated - open the document above for the full version.

Radiated test: Below 1 GHz Radiated test: Above 1 GHz Conducted test: