AVHPCH1Wireless DECT Headset

Page | 1 12/20/23 rev1.4 PAR Clear Headset- Quick Reference Guide • Battery Charging and Usage..........................................................................................................page 1-2 • Headset Registration/De-Registration.........................................................................................page 3-4 • Headset Controls................................................................................................................................page 5 • Order Taking Modes...........................................................................................................................page 5 • Changing Basic Volume Settings......................................................................................................page 6 • Headset Specifications.......................................................................................................................page 7 Battery Charging and Usage: Insert a BATTERY into the charging stations or place the HEADSET into the Headset Charging Station. • The LED(s) on the battery will now flash Green indicating the battery is currently being charged. • All four LEDS will be lit Green (steady) to indicate the battery is fully charged. Page | 2 12/20/23 rev1.4 To insert the BATTERY Into the HEADSET: • Insert the POD into the CARRIER and slide the lock switch on the Carrier to complete the HEADSET • Slide a charged BATTERY as indicated below To remove the BATTERY from the HEADSET: • Using your finger, gently push up on the battery latch. This will release the battery. • Then use another finger and pull the battery from the battery compartment. Headset Registration: Page | 3 12/20/23 rev1.4 1. Once a charged BATTERY is inserted into the HEADSET should power on automatically. 2. Log into the webpage/portal with the provided link and credentials and click on ‘Find & Register Headsets’ (or button sequence provided) 3. Once registered the LED lights should be steady green on the POD and CARRIER along with an audible message stating ‘Lane 1’/ or the LED lights should be steady red/ green on the POD and CARRIER along with an audible message stating ‘Lane 2’. To de-register a headset: 1. Log into the webpage/portal provided and navigate to the section HEADSETS, and click on ‘de-register headsets’ (or button sequence provided) 2. Select the headset serial you wish to de-register and click on the ‘de-register' button next to it Page | 4 12/20/23 rev1.4 Note: To locate the serial number of the POD: (a) the headset serial number is located on POD (b) proceed to dis-assemble the POD by sliding the un-lock switch on the Carrier. (c) Remove the POD and locate the white label with the serial number Headset Controls Page | 5 12/20/23 rev1.4 Order Taking Modes Refer to the Store Manager or Store Technical Team to confirm which Order Taking Mode the system will be using. To change the Order Taking Mode: 1. Log into the webpage/portal provided and navigate to the section ‘Communications’, then select the respective ‘Order Taking Mode’ accordingly for the correct lane: (refer to chart below for descriptions of modes) Changing Basic Volume Settings Inbound Microphone Volume Page | 6 12/20/23 rev1.4 Changing the inbound microphone volume affects the sound volume coming from the customer order point microphone to the HEADSET earphone speaker. To turn up or down the inbound microphone: 1. Log into the webpage/portal provided and navigate to the section ‘Communications’, then ‘Drive Thru Volume’, and select the ‘microphone gain’ section 2. Select a new value. The range is 0 (silent) to 20 (maximum) 3. Then click ‘Apply Changes’ Outbound Microphone Volume Changing the outbound talk volume affects the volume of the speaker at the customer order point. To change the outbound talk volume: 1. Log into the webpage/portal provided and navigate to the section ‘Communications’, then ‘Drive Thru Volume’, and select the ‘Day Speaker Gain’ section 2. Select a new value. The range is 0 (silent) to 20 (maximum) 3. Then click ‘Apply Changes’ Headset Specifications A. Physical Parameter Specification or Requirement Dimensions (l x w x d) XXX place holder Weight XXX place holder Page | 7 12/20/23 rev1.4 B. Electrical Parameter Specification or Requirement Input Power 3.7 VDC Radio Frequency DECT Maximum Output Power DECT per Region Speaker Outputs XXX place holder watts C. Functional Parameter Specification or Requirement Switches Capacitive touch key zones Indicator Red, Green and Blue LED Operating Range XXX place holder (ft)-subject to local environment Operating Temperature 0 to 60 C Page | 8 12/20/23 rev1.4 FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ISED non-interference disclaimer This device contains licence-exempt transmitt…

Text truncated - open the document above for the full version.

ParTech, Inc. 8383 Seneca Turnpike New Hartford, NY 13413 partech.com | 800.448.6505 Covered Equipment Certification Attestation Letter December 21, 2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: AVHPCT1 and AVHPCH1 ParTech, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. ParTech, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Rafael Martinez Title: Sr Compliance Engineer Company Name: ParTech, Inc. Date: 12/20/2023

ParTech, Inc. 8383 Seneca Turnpike New Hartford, NY 13413 partech.com | 800.448.6505 U.S. Agent Designation for Service of Process - Certification Attestation Letter December 21, 2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: AVHPCT1 and AVHPCH1 Applicant FRN: 0021475553 Per section 2.911(d)(7) of the FCC rules, ParTech, Inc (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process: Company Name: ParTech Inc. Physical U.S. Company Address: 8383 Seneca Turnpike, New Hartford NY 13413 USA Agent name: Rafael Martinez Agent Email Address: [email protected] Agent FRN**: 0021475553 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant): Signed: Signed: Printed name: Rafael Martinez Printed name: Click here to enter text. Title: Sr Compliance Engineer Title: Click here to enter text. Company Name: ParTech Inc. Company Name: Click here to enter text. Date: December 20, 2023 Date: Click here to enter a date.

ParTech, Inc. 8383 Seneca Turnpike New Hartford, NY 13413 partech.com | 800.448.6505 December 21, 2023 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Request for Confidentiality – FCC FCC ID: AVHPCT1 and AVHPCH1 Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. We request the exhibits selected below as long term confidential (LTC) be withheld from public view permanently: Selection of exhibits for LTC - general Exhibit name ☒ Permanent (Long Term) Block Diagrams ☒ Permanent (Long Term) Operation Description / Theory of Operation ☒ Permanent (Long Term) Parts List & Placement / BOM ☒ Permanent (Long Term) Schematics Selection of exhibits for LTC - specific 1 Exhibit name ☐ Permanent (Long Term) Tune-Up Procedure ☐ Permanent (Long Term) SDR 2 Software / Security Info Selection of exhibits for LTC (with NDA) 3 Exhibit name ☐ Permanent (Long Term) User’s Manual ☐ Permanent (Long Term) Internal Photos We also request the exhibits selected below as short term confidential (STC) be withheld from public view for a period of 30 days 4 from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public: Selection of exhibits for STC 5 Exhibit name ☐ Short Term Block Diagrams ☐ Short Term Operation Description / Theory of Operation ☐ Short Term Parts List & Placement / BOM ☐ Short Term Schematics ☐ Short Term User’s Manual ☒ Short Term Internal Photos ☐ Short Term External Photos ☒ Short Term Test Setup Photos ☐ Short Term Tune-Up Procedure (for Licensed equipment only) 1 - Tune up procedure is applicable only for licensed equipment. 2 - The FCC rules require that any radio, in which the software is designed or expected to be modified by a party other than the manufacturer that would affect the operating parameters of frequency range, modulation type, maximum output power or other radio frequency parameters outside the range under which the transmitter has been approved in accordance with the FCC rules, must be certified as a software-defined radio (SDR). 3 - These items require further information to be provided to TCB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and review section II, 3) regarding specific information (NDA) that must accompany these requests. 4 - Number of days can be listed up to 180 but should not go past the date of beginning of product marketing/sale. 5 - Any exhibits that may have already been requested to have “Permanent” confidentiality need not be repeated under Short-Term confidentiality request. ParTech, Inc. 8383 Seneca Turnpike New Hartford, NY 13413 partech.com | 800.448.6505 Our company has spent a substantial effort in developing this product and it is one of the first of its kind in the industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. When the device is marketed before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed by: Rafael Martinez Signature Print name Sr Compliance Engineer Title 315-330-8702 Phone ParTech Inc Company 8383 Seneca Turnpike, New Hartford NY 13413 Address

ParTech, Inc. 8383 Seneca Turnpike New Hartford, NY 13413 partech.com | 800.448.6505 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent for FCC and ISED application On our behalf, I appoint Spencer Zhong of Nemko Canada, Inc. at 303 River Road, Ottawa, Ontario, Canada K1V 1H2, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC and in ISED Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with ParTech, Inc. 8383 Seneca Turnpike, New Hartford NY 13413 Dated: December 21, 2023 Agency agreement expiration date: 2024-12-18 *Up to 12 months Signed by: Rafael Martinez Signature Print name Sr Compliance Engineer Title 315-330-8702 Phone On behalf of: ParTech, Inc. Company name

9.53 0.375 25.401.000 3.30 0.130 0.69 0.027 2.230.088 2.54 0.100 1.17 0.046 2.260.089 SEE NOTE 4 SEE NOTE 5 NOTES: NO CHANGES CAN BE MADE WITHOUT THE PRIOR APPROVAL OF PAR1. SILKSCREEN (BLACK) OR THERMAL HEAT TRANSFER2. LABEL TO BE PAR PART NUMBER 26-1021-3685-5, ZEBRA Z-ULTIMATE 4000T OR EQUIVALENT3. CHARACTERS TO BE ARIAL OR VENUS, NARROW 6 PT, CAPS AND LOWER CASE4. CHARACTERS TO BE ARIAL OR VENUS, BOLD NARROW, CAPS5. REVECOISSUE DATE AND DESCRIPTIONDRFTCHKD C B A 8 B A NO 8383 Seneca Turnpike GENERAL TOLERANCES UNLESS OTHERWISE SPECIFIED: ISO 2768-1 (FINE) INTERPRET PER ASME Y14.5 - 1994 FIRST ANGLE PROJECTION ANGLES ± .000 ± .00 ± .0 ± .0 ± .00 ± .000 ± .0000 ± INCHES MILLIMETERS SCALE DO NOT SCALE DRAWING 4 TOLERANCES EXCEPT AS NOTED DIVISION CODE DIVISION NEXT ASSEMBLY CHKD DESIGN REFERENCE CODES REVISION 5 DRAWING NUMBER DATEMFGDATEDRFT C DATEAPPVLDATE New Hartford, NY 13413 ParTech, Inc. THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF PARTECH, INC AND SHALL NOT BE DISCLOSED TO ANY THIRD PARTY, OR USED FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT WAS SUPPLIED, OR REPRODUCED WITHOUT WRITTEN CONSENT OF PARTECH, INC TITLE REV.DRAWING NO. CAGE NUMBER DET. LISTS SIZE YES MODEL SHTOF 3 2 D 7 2 0 ± D 64 DISTRIBUTION 71 C 1 6 A B 3 5 8 0.5 1 1 NA NA NA NA POD G7/PAR CLEAR FCC LABEL 755050201 004116501 755049xxx A BLDG AND COMM SVCS 10:1 ND NA NA NA NA Model:PCH1 P/N:K7808-01 FCC ID: AVHPCH1 IC : 10329A-PCH1 D E A 111318 Production ReleaseRMBDJ

REP030748 Nemko Group Nemko Scandinavia AS, Instituttveien 6, 2007 Kjeller, Norway TEL +47 22 96 03 30 EMAIL [email protected] nemko.com/no Template version: B RF Exposure Assessment Product DECT Headset Name and address of the applicant ParTech, Inc. 8383 Seneca Turnpike, New Hartford NY 13413, USA Name and address of the manufacturer ParTech, Inc. 8383 Seneca Turnpike, New Hartford NY 13413, USA Model PC Headset / PCH1 – PAR Clear Headset Rating 3.7 V DC , 800 mAh Trademark PAR Additional information DECT 6.0 Evaluated according to FCC Part 1.1307(b) RF Exposure Assessment FCC KDB 447498 D01 v06 General RF Exposure Guidance Order number PRJ0041321 Issue date 2024-03-05 Name and address of the testing laboratory Nemko Scandinavia AS Instituttveien 6 2007 Kjeller, Norway www.nemko.com CAB Number: FCC: NO0001 ISED: NO0470 ISED No: 2040D-1 An accredited technical test executed under the Norwegian accreditation scheme Prepared by [Frode Sveinsen] Approved by [Roy Uggerud] This report was originally distributed electronically with digital signatures. For more information, please contact Nemko Scandinavia AS. Exposure Assessment FCC Part 1.1307 PRJ041321 REP030748 FCC ID: AVHPCH1 Nemko Scandinavia AS Page 2 (3) Revision history Revision Date Comment Sign A 2024-03-05 First Edition RU GENERAL REMARKS This report applies only to the sample(s) tested. It is the manufacturer's responsibility to ensure the additional production units of this product are manufactured with identical electrical and mechanical components. The manufacturer is solely responsible for any modifications to the product that could result in non-compliance with the relevant regulations. This report shall not be reproduced, except in full, without the written approval of Nemko. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Group accepts no responsibility for damage suffered by any third party because of decisions made or actions based on this report. Opinions expressed within this report regarding general assessments and qualifications for PASS or FAIL to the standards limits and requirements, are not part of the current accreditation. Neither are opinions expressed regarding model variants covered by the testing of this report. Exposure Assessment FCC Part 1.1307 PRJ041321 REP030748 FCC ID: AVHPCH1 Nemko Scandinavia AS Page 3 (3) 1 Exposure Evaluation 1.1 EUT Technical Information Name Drive Thru System, DECT Headset Model/version PC Headset / PCH1 – PAR Clear Headset FCC ID AVHPCH1 Serial Number PRJ00413210013 Hardware identity and/or version 2.2 Software identity and/or version 0.1.12 Frequency Range 1921.536 – 1928.448 MHz Type of Power Supply Secondary Battery (Li-Ion 3.7V, 800 mAh) Type of Portable Device DECT Headset Output Power incl. Tune-Up Tolerance 2.69 mW (Average) / 65 mW (Peak) Reference to RF Test Report REP028184 1.2 Evaluation Summary The EUT has been evaluated and found to be exempt from SAR Evaluation according to the Exemption Criteria in KDB 447498 D01 General RF Exposure Guidance v06, Clause 4.3 a): Determination of Exemption for Single RF Sources Average Conducted Power, including Tune Up Tolerance 2.69 mW Maximum Duty Cycle 4.33 % Separation Distance 5 mm Frequency (valid for 100 MHz to 6 GHz) 1.925 GHz Exclusion Criteria: (2.69 mW / 5 mm) * SQRT(1.93 GHz) 0.75 Exclusion Threshold (1-g SAR: 3.0, 10-g Extremities SAR: 7.0) 3.0 1-g Exclusion Threshold for Body-Worn Device @X GHz and 5 mm 10.8 mW CONCLUSION EXEMPTED

REP028184 Template version: D Nemko Group Nemko Scandinavia AS, Instituttveien 6, 2007 Kjeller, Norway TEL +47 22 96 03 30 EMAIL [email protected] nemko.com/no Test Report Product DECT Headset Name and address of the applicant ParTech, Inc. 8383 Seneca Turnpike, New Hartford NY 13413, USA Name and address of the manufacturer ParTech, Inc. 8383 Seneca Turnpike, New Hartford NY 13413, USA Model PC Headset / PCH1 – PAR Clear Headset Rating 3.7 V DC , 800 mAh Trademark PAR Additional information DECT 6.0 Tested according to FCC Part 15, subpart D Isochronous UPCS Device, 1920 – 1930 MHz ISED Canada RSS-213, Issue 3 2 GHz License-Exempt Personal Communications Services (LE-PCS) Devices Order number PRJ0041321 Tested in period 2023-11-08 to 2024-02-12 Issue date 2024-02-20 Name and address of the testing laboratory Nemko Scandinavia AS Instituttveien 6 2007 Kjeller, Norway www.nemko.com CAB Number: FCC: NO0001 ISED: NO0470 ISED No: 2040D-1 An accredited technical test executed under the Norwegian accreditation scheme Prepared by [Frode Sveinsen] Approved by [Jan G Eriksen] This report was originally distributed electronically with digital signatures. For more information, please contact Nemko Scandinavia AS. TEST REPORT FCC part 15D PRJ0041321 REP028184 FCC ID: AVHPCH1 IC: 10329A-PCH1 Nemko Scandinavia AS Page 2 (39) Revision history Revision Date Comment Sign A 2024-02-20 First edition FS GENERAL REMARKS This report applies only to the sample(s) tested. It is the manufacturer's responsibility to ensure the additional production units of this product are manufactured with identical electrical and mechanical components. The manufacturer is solely responsible for any modifications to the product that could result in non-compliance with the relevant regulations. This report shall not be reproduced except in full without the written approval of Nemko. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Group accepts no responsibility for damage suffered by any third party because of decisions made or actions based on this report. Opinions expressed within this report regarding general assessments and qualifications for PASS or FAIL to the standards limits and requirements, are not part of the current accreditation. Neither are opinions expressed regarding model variants covered by the testing of this report. CALIBRATION All instruments used in the tests given in this test report are calibrated and traceable to national or international standards. Between calibrations all test set-ups are controlled and verified on a regular basis by periodic checks to ensure, with 95% confidence, that the instruments remain within the calibrated levels. MEASUREMENT UNCERTAINTY Measurement uncertainties are calculated or considered for all instruments and instrument set-ups used during these tests. Uncertainty figures are found in a separate clause in this report. TEST REPORT FCC part 15D PRJ0041321 REP028184 FCC ID: AVHPCH1 IC: 10329A-PCH1 Nemko Scandinavia AS Page 3 (39) CONTENTS 1 INFORMATION ................................................................................................................................. 4 1.1 Tested Item ........................................................................................................................................................ 4 1.2 Description of Tested Device .............................................................................................................................. 4 1.3 Test Conditions .................................................................................................................................................. 4 1.4 Test Engineers ................................................................................................................................................... 4 1.5 Digital Modulation Techniques ............................................................................................................................ 4 1.6 Antenna Requirement ......................................................................................................................................... 5 1.7 Channel Frequencies ......................................................................................................................................... 5 1.8 Other Comments ................................................................................................................................................ 5 2 TEST REPORT SUMMARY .............................................................................................................. 6 2.1 General .............................................................................................................................................................. 6 2.2 Test Summary .................................................................................................................................................... 6 3 TEST RESULTS ................................................................................................................................ 8 3.1 Automatic Discontinuation of Transmission......................................................................................................... 8 3.2 Peak Power Output ............................................................................................................................................ 9 3.3 Emission Bandwidth B ...................................................................................................................................... 11 3.4 Power Spectral Density .................................................................................................................................... 13 3.5 In-Band Unwanted Emissions, Conducted ........................................................................................................ 15 …

Text truncated - open the document above for the full version.

TEST SET-UP PHOTOS PRJ0041321 FCC ID: AVHPCH1 Page 1 (1) Nemko Scandinavia AS Conducted Test