B3Q5V8001RFID Label Printer

User's Manual ● Please read this manual before using the printer. ● Keep this manual in a convenient place for future reference. RL-700S RFID Label Printer DRAFT 2 Introduction Thank you for purchasing the RL-700S. The RL-700S (hereafter, referred to as "this machine") is a RFID label printer that enables you to easily create custom labels with IC tag (RFID) and read/write the IC tag (RFID) with equipped reader/writer after it is connected to a computer. With this machine, you can use not only SZ tapes (RFID labels), but also TZ tapes and HG tapes which available in the market to create the labels. About the machine • We shall not be liable to you or others for any damage, loss of any equipment, media, programs, or data, and any claims of third parties arising out of the use of this product. • The rights and copyrights of bundled software (including but not limited to the program, images, clip art, templates and text incorporated into the software) and attached manuals and other documents, and any copies of the software, are owned by Brother Industries, Ltd. and its suppliers. The user may not resell, duplicate, change, reverse-engineer, disassemble, or decompile any part of the above software without prior written permission. About the manual • This manual contains various precautions and basic procedures. Be sure to read this manual before using the machine. Afterward, keep this manual in a safe place for future reference. • The contents of this manual are subject to change without notice. • No part of this manual may be reproduced in any form, including photocopying or reprinting, without prior consent. • This manual has been carefully created. However, if you notice an error or something questionable, feel free to contact us. About the trademarks •Microsoft ® , Windows ® are registered trademarks of Microsoft Corporation in the US and other countries. • Adobe ® , Acrobat ® and Adobe ® Reader ® are registered trademarks of Adobe Systems Incorporated. • I-CODE SLI is registered trademarks of NXP Semiconductors (former Philips Semiconductors). • All other software and product names mentioned are trademarks or registered trademarks of their respective companies. 3 Federal Communications Commission (FCC) Declaration of Conformity (For USA Only) Responsible Party:Brother International Corporation 100 Somerset Corporate Boulevard Bridgewater, NJ 08807-0911 USA TEL: (908) 704-1700 declares that the product Product Name:RFID Label Printer P-touch R Model Number:RL-700S This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • The enclosed interface cable should be used in order to ensure compliance with the limits for a Class B digital device. • A shielded interface cable should be used in order to ensure compliance with the limits for a Class B digital device. • Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user's authority to operate the equipment. 4 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About the machine .............................................................................................. 2 About the manual ................................................................................................ 2 About the trademarks.......................................................................................... 2 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before Use5 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installation Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Printer ................................................................................................................. 8 SZ (RFID) Tape .................................................................................................. 9 Part Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Front face .......................................................................................................... 11 Rear view .......................................................................................................... 11 Button................................................................................................................ 12 Lamp Display .................................................................................................... 12 Installing the Software. . . . . . . . . . . . . . . . . . . . . . . . . …

Text truncated - open the document above for the full version.

ラベルロケーション ラベル貼り付け位置

Page 1 of 22 Test Report No. R62167E-1 Cosmos Corporation COSMOS MEASUREMENT/TECHNICAL REPORT FCC Part 15 Subpart C Issued: July 13 th , 2007 Name and Address Brother Industries, Ltd. of the Applicant: 1-1-1, Kawagishi, Mizuho-ku, Nagoya, Japan 467-8562 Test Item: Label Printer Identification: RL-700S Serial No.: E65117-D7G127230 FCC ID: B3Q5V8001 Sample Receipt Date: June 7th, 2007 Test Specification: FCC Part 15 Subpart C, 15.225 Date of Testing: July 3 rd , 2007 Test Result: PASS Report Prepared by: Cosmos Corporation 2-3571 Ohnogi, Watarai-cho, Watarai-gun, Mie, Japan 516-2102 Phone: +81-596-63-0707 Fax: +81-596-63-0777 Cosmos Corporation EMC Lab. No. 2 519 Shimesasu, Watarai-cho, Watarai-gun, Mie-ken 516-2119, Japan Phone: +81-596-64-0889 Fax: +81-596-64-0895 Tested by: July 13th, 2007 D. Watanuki, Engineer Date Reviewed by: July 13th, 2007 Y. Kawahara, Leader Date Notes: 1. This report should not be reproduced except in full, without the written approval of Cosmos Corporation. 2. All measurement data contained in this report may have uncertainty. A judgment for the limitation should be taken into the count. 3. The report in this report apply only to the sample tested. Page 2 of 22 Test Report No. R62167E-1 Cosmos Corporation COSMOS List of Contents Page 1. Description of Equipment Under Test ............................................................................................4 1.1 Product Description ....................................................................................................................4 1.2 Antenna Description...................................................................................................................4 1.3 Accompanied Peripherals Description .......................................................................................4 2. General Information ...........................................................................................................................5 2.1 Test Methodology ........................................................................................................................5 2.2 Test Facility ................................................................................................................................5 2.3 Tractability..................................................................................................................................5 3. Summary of Test Results ...................................................................................................................5 4. Test Configuration ..............................................................................................................................6 4.1 Conducted Emission Measurement .........................................................................................6 4.2 Radiated Measurement in 3m Anechoic Chamber..................................................................6 4.3 Test Mode..................................................................................................................................7 5. Measurement Result...........................................................................................................................8 5.1 15. 207 AC Power Conducted Emission...................................................................................8 5.1.1 Setting Remarks ................................................................................................................8 5.1.2 Minimum Standard ...........................................................................................................8 5.1.3 Result .................................................................................................................................8 5.1.4 Measured Data ..................................................................................................................9 5.2 15. 209 Transmitter Radiated Emissions..............................................................................11 5.2.1 Setting Remarks ..............................................................................................................11 5.2.2 Minimum Standard .........................................................................................................12 5.2.3 Result ...............................................................................................................................12 5.2.4 Measured Data ................................................................................................................13 5.3 Maximum Carrier Output Power..........................................................................................15 5.3.1 Setting Remarks ..............................................................................................................15 5.3.2 Minimum Standard .........................................................................................................15 5.3.3 Result ...............................................................................................................................15 5.3.4 Measured Data (3m distance) .........................................................................................16 5.4 Frequency Tolerance..............................................................................................................18 5.4.1 Setting Remarks .......................................................................................................... ....18 5.4.2 Minimum Standard .........................................................................................................18 5.4.3 Result ...............................................................................................................................18 5.4.4 Measured Data ................................................................................................................18 6. Photos .........................................................................…

Text truncated - open the document above for the full version.

Page 19 of 22 Test Report No. R62167E-1 Cosmos Corporation COSMOS 6. Photos 6.1 Setup Photo (Conducted Emission) Front View Side View Page 20 of 22 Test Report No. R62167E-1 Cosmos Corporation COSMOS 6.2 Setup Photo (Radiated Emission) Front View (9kHz - 30MHz) Rear View (9kHz - 30MHz) Page 21 of 22 Test Report No. R62167E-1 Cosmos Corporation COSMOS Front View (Above 30MHz) Rear View (Above 30MHz)