B3QBRBT2G4RJ3Bluetooth Module

2014/03/14 User Manual Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification (installation procedure). The following information must be indicated on the host device of this module; [for FCC] Contains Transmitter Module FCC ID: B3QBRBT2G4RJ3 or Contains FCC ID: B3QBRBT2G4RJ3 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. *If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual. [for IC] Contains Transmitter Module IC: 1112C-BRBT2G4RJ3 or Contains IC: 1112C-BRBT2G4RJ3 The following statements must be described on the user manual of the host device of this module; [for FCC] FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. When installing it in a mobile equipment This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). [※]But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person's body. [※] The last sentence is basically unnecessary, but it can be also possible to describe. When installing it in a portable equipment This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR). Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. [for IC] This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. When installing it in a mobile equipment This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). [※]But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person's body. Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation de l’exposition maximale autorisée. [※]Cependant, il est souhaitable qu'il devrait être installé et utilisé en gardant une distance de 20 cm ou plus entre le dispositif rayonnant et le corps. [※] The last sentence is basically unnecessary, but it can be also possible to describe. When installing it in a portable equipment This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR). Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation du débit d’absorption spécifique (DAS).

BROTHER INDUSTRIES. LTD. 15-1 , Naeshiro-cho, Mizuho-ku, Nagoya 467 -8561, Japan Phone . +81 528242348 Fax : +81 52 821 1068 Letter of Authorization Date: March 11,2014 UL Japan, Inc. 4383 -326 Asama-cho, Ise-shi. Mie 516-0021 Japan FCC ID : B3QBRBT2c4zu3 Applicant: Brother Industries, Ltd. To whom it may concem: Please be advised we authorize Hiroya Tabata of WiSE Japan, UL Verification Service, UL Japan, Inc. to act on our behalf, until otherwise notified, for applications submitted for Federal Communication Commission Radio equipment applications submitted to UL Japan, Inc. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as definid in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includeJ FCC benefits. The application for the subject equipment has not been submitted to another TCB for certification. Thank you for your attention to this matter. Sincerely, Group Manager Brother Industries, Ltd.

BROTHER INDUSTRIES, LTD. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467 -8561, Japan Phone . +81 528242348 Fax . +81 52 821 1068 Request for Limited Modular Transmitter Approval March ll,2014 FCC ID : B3QBRBT2G4RJ3 Applicant : Brother Industries, Ltd. This transmitter, model: BRBT2G4RJ3 is designed by us. It complies with the modular transmitters basic requirements (ltem 1 to 8) in FCC Part 15 Subpart C Section 15.212 as indicated below: Modular Approval Checklist: Modular approval requirement Yes (l) Have its own RF shielding. (2) Have buffered modulation/data inputs. (3) Have its own power supply regulation. X This module does not have the power supply regulator. The stable voltage will be supplied by end product. Therefore end product will be required to have the power supply regulator. (4) Comply with the antenna and transmission system requirements of p 15.203, 15.20a(b) and 15.204(c). (5) Tested in a stand-alone configuration. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in FCC $ 15.207. AC or DC power lines and data input/output lines connected to the module must not contain fenites, unless they will be marketed with the module. The length of these lines shall be the length typical of actual use or, if that length is unknown, at least l0 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available. (6) Equipped with either a permanently affixed label or rrurst Ue cupaUt. of electronically displaying its FCC ID. If the Fcc ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. (7) Comply with any specific rules or operating ,equir"r*,nts that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. (8) Comply with any applicable nr e*@ configuration: The modular transmitter complies with FCC radiation exposure requirement. Yasuhiro Iriyama Group Manager Brother Industries, Ltd.

BROTHER INDUSTRIES, LTD. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan Phone : +81 528242348 Fax : +81 52 821 1068 Request for Short-Term Confidentiality Date:March 11.2014 UL Japan, Inc. 4383 -326 Asama-cho, Ise-shi, Mie 516-0021 Japan FCC ID : B3QBRBT2G4RI3 Applicant: Brother Industries, Ltd. To whom it may concern: Please be advised that the following information is to be held in confidence for 90 days from the date of the Grant of Equipment Authorization and behalf of us, referring to the FCC rutes 0.4S2 and 0.459: Extemal Photos Intemal Photos Test Setup Photos User Manual The application contains technical information, which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, ,1 I I - ffa*r/r'uY J-rr;V e,*u Yasuntro lrrvama Group Uanager Brother Industries, Ltd.

BROTHER INDUSTRIES. LTD. '15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan Phone : +81 52 824 2348 Fax : +81 52 821 1068 Special Power of Attorney To whom it may concern: I' Takashi Fujiwara of Brother Industries, Ltd. hereby appoint Yasuhiro lriyama of BROTHER INDUSTRIES, LTD. to represent me to act on my behalito do any and all of the following: Sign the following documents on my behalf and apply to FCC for the products - Letter of agency and anti-drug - Confidentiality cover letters - Any other application document that requires a signature by grantee. The rights, powers and authority in fact to exercise any and all of the rights and powers herein granted shall commence and be in full force and effective for one year from February 6,'z0l4unless specifically extended or terminated by either parfy. Date: February 6,2014 Place: Japan

BRBT2G4RJ3 External photos Height 4.0mm Height 4.0mm Weight 1.98g 20.0mm Module(Top) 2014/3/10 1/4 BRBT2G4RJ3 External photos Module(Back) 2014/3/10 2/4 BRBT2G4RJ3 External photos Module(Top) Module(Underside) Module(Left)Module(Left) Module(Right) 2014/3/10 3/4

2014/03/13 BRBT2G4RJ3 Label Design (mm) BRBT2G4RJ3 Label Design (mm) Label Back of BRBT2G4RJ3

BRBT2G4RJ3 Internal photos Module(Top) 2014/3/10 4/4

Test report No. : 10191363H-A Page : 2 of 63 FCC ID : B3QBRBT2G4RJ3 Issued date : March 19, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 REVISION HISTORY Original Test Report No.: 10191363H-A Revision Test report No. Date Page revised Contents - (Original) 10191363H-A March 19, 2014 - - Test report No. : 10191363H-A Page : 3 of 63 FCC ID : B3QBRBT2G4RJ3 Issued date : March 19, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 CONTENTS PAGE SECTION 1: Customer information ......................................................................................................... 4 SECTION 2: Equipment under test (E.U.T.) ........................................................................................... 4 SECTION 3: Test specification, procedures & results ............................................................................ 5 SECTION 4: Operation of E.U.T. during testing .................................................................................... 9 SECTION 5: Conducted Emission .......................................................................................................... 11 SECTION 6: Radiated Spurious Emission ............................................................................................ 12 SECTION 7: Antenna Terminal Conducted Tests ................................................................................ 13 APPENDIX 1: Data of EMI test .............................................................................................................. 14 Conducted Emission ......................................................................................................................... 14 20dB Bandwidth and Carrier Frequency Separation ......................................................................... 18 Number of Hopping Frequency ........................................................................................................ 21 Dwell time ......................................................................................................................................... 23 Maximum Peak Output Power .......................................................................................................... 26 Radiated Spurious Emission ............................................................................................................. 28 Conducted Spurious Emission .......................................................................................................... 42 Conducted Emission Band Edge compliance ................................................................................... 54 99%Occupied Bandwidth ................................................................................................................. 56 APPENDIX 2: Test instruments ............................................................................................................. 59 APPENDIX 3: Photographs of test setup ............................................................................................... 61 Conducted Emission ......................................................................................................................... 61 Radiated Spurious Emission ............................................................................................................. 62 Worst Case Position (Horizontal: Z-axis/ Vertical:Y-axis) .............................................................. 63 Test report No. : 10191363H-A Page : 4 of 63 FCC ID : B3QBRBT2G4RJ3 Issued date : March 19, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 SECTION 1: Customer information Company Name : BROTHER INDUSTRIES, LTD. Trade Name : BROTHER Address : 15-1, Naeshiro-cho, Mizuho-ku, Nagoya-shi, 467-8561, Japan Telephone Number : +81-52-824-2345 Facsimile Number : +81-52-824-1068 Contact Person : Toshikazu Koike SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : Bluetooth Module Model No. : BRBT2G4RJ3 Serial No. : Refer to Section 4, Clause 4.2 Rating : DC 1.8 V Receipt Date of Sample : January 11, 2014 Country of Mass-production : China Condition of EUT : Production prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No Modification by the test lab 2.2 Product Description General Specification Clock frequency(ies) in the system : 38.4MHz for oscillator, 32kHz for Sleep Clock Radio Specification [Bluetooth (Ver. 3.0 with EDR function)] Radio Type : Transceiver Frequency of Operation : 2402-2480MHz Modulation : FHSS Power Supply (radio part input) : DC 1.8V Antenna type : Chip Antenna Antenna Gain : 1.5dBi Test report No. : 10191363H-A Page : 5 of 63 FCC ID : B3QBRBT2G4RJ3 Issued date : March 19, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 SECTION 3: Test specification, procedures & results 3.1 Test Specification Test Specification : FCC Part 15 Subpart C: 2013, final revised on September 30, 2013 and effective October 30, 2013 Title : FCC 47CFR Part15 Radio Frequency Device Subpart C Intentional Radiators Section 15.207 Conducted limits Section 15.247 Operation within the bands 902-928MHz, 2400-2483.5MHz, and 5725-5850MHz Test report No. : 10191363H-A Page : 6 of 63 FCC ID : B3QBRBT2G4RJ3 Issued date : March 19, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 3.2 Procedures and results Item Test Procedure Specification Worst Margin Results Remarks Conducted Emission FCC: ANSI C63.4:2003 7. AC powerline conducted emission measureme…

Text truncated - open the document above for the full version.

Test report No. : 10191363H-A Page : 61 of 63 FCC ID : B3QBRBT2G4RJ3 Issued date : March 19, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 APPENDIX 3: Photographs of test setup Conducted Emission Photo 1 Photo 2 Test report No. : 10191363H-A Page : 62 of 63 FCC ID : B3QBRBT2G4RJ3 Issued date : March 19, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 Radiated Spurious Emission Photo 1 Photo 2 Test report No. : 10191363H-A Page : 63 of 63 FCC ID : B3QBRBT2G4RJ3 Issued date : March 19, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 Worst Case Position (Horizontal: Z-axis/ Vertical:Y-axis) X-axis Y-axis Z-axis End of Report